References
- Schwentenwein M, Schneider P, Homa J. Lithography-based ceramic manufacturing: a novel technique for additive manufacturing of high-performance ceramics. Adv Sci Technol. 2014;88:60–64. doi: 10.4028/www.scientific.net/AST.88.60
- Zocca A, Colombo P, Gomes CM, et al. Additive manufacturing of ceramics: issues, potentialities, and opportunities. J Am Ceram Soc. 2015;98(7):1983–2001. doi: 10.1111/jace.13700
- Chen Z, Li Z, Li J, et al. 3D printing of ceramics: a review. J Eur Ceram Soc. 2019;39(4):661–687. doi: 10.1016/j.jeurceramsoc.2018.11.013
- Halloran JW. Ceramic stereolithography: additive manufacturing for ceramics by photopolymerization. Annu Rev Mater Res. 2016;46(1):19–40. doi: 10.1146/annurev-matsci-070115-031841
- Griffith ML, Halloran JW. Freeform fabrication of ceramics via stereolithography. J Am Ceram Soc. 1996;79(10):2601–2608. doi: 10.1111/j.1151-2916.1996.tb09022.x
- Shen JZ, Kosmač T. Advanced ceramics for dentistry. Waltham: Elsevier; 2014. p 32.
- Dehurtevent M, Robberecht L, Hornez JC, et al. Stereolithography: a new method for processing dental ceramics by additive computer-aided manufacturing. Dent Mater. 2017;33(5):477–485. doi: 10.1016/j.dental.2017.01.018
- Lian Q, Sui W, Wu X, et al. Additive manufacturing of ZrO2 ceramic dental bridges by stereolithography. Rapid Prototyping J. 2018;24(1):114–119. doi: 10.1108/RPJ-09-2016-0144
- Tahayeri A, Morgan M, Fugolin AP, et al. 3D printed versus conventionally cured provisional crown and bridge dental materials. Dent Mater. 2018;34(2):192–200. doi: 10.1016/j.dental.2017.10.003
- Ucar Y, Aysan Meric I, Ekren O. Layered manufacturing of dental ceramics: fracture mechanics, microstructure, and elemental composition of lithography-sintered ceramic. J Prosthodont. 2019;28(1):e310–e318. doi: 10.1111/jopr.12748
- Galante R, Figueiredo-Pina CG, Serro AP. Additive manufacturing of ceramics for dental applications: a review. Dent Mater. 2019;35(6):825–846. doi: 10.1016/j.dental.2019.02.026
- Li H, Song L, Sun J, et al. Dental ceramic prostheses by stereolithography-based additive manufacturing: potentials and challenges. Adv Appl Ceram. 2019;118(1–2):30–36. doi: 10.1080/17436753.2018.1447834
- Tian X, Li D, Chen Z, et al. Study on the fabrication accuracy of ceramic parts by direct stereolithography. Virtual Phys Prototyping. 2012;7(3):195–202. doi: 10.1080/17452759.2012.718492
- Liu Y, Shen JZ. Clinical failures of ceramic dental prostheses. In: Shen JZ, Kosmač T, editors. Advanced ceramics for dentistry. Waltham: Elsevier; 2014. p. 85.
- Vichi A, Louca C, Corciolani G, et al. Color related to ceramic and zirconia restorations: a review. Dent Mater. 2011;27(1):97–108. doi: 10.1016/j.dental.2010.10.018