References
- Chaithanya PP, Das PK, Crow A, Hunt S. 2010. The effect of distortion on the buckling strength of stiffened panels. Ships Offshore Struct. 5(2):141–153.
- Deng D, Liang W, Murakawa H. 2007. Determination of welding deformation in fillet-welded joint by means of numerical simulation and comparison with experimental results. J Mater Process Technol. 183(2–3):219–225.
- Deng D, Murakawa H. 2008. Prediction of welding distortion and residual stress in a thin plate butt-welded joint. Comput Mater Sci. 43(2):353–365.
- Dow R, Hugill R, Clark J, Smith C. 1981. Evaluation of ultimate ship hull strength. SNAME extreme loads and response symposium; Arlington, VA.
- Dow RS. 1991. Testing and analysis of a 1/3-scale welded steel frigate model. In: Proceedings of International Conference on Advances in Marine Structures; May 1991; Dunfermline, Scotland. London: Elsevier Applied Science.
- Faulkner D. 1975. A review of effective plating for use in the analysis of stiffened plating in bending and compression. J Ship Res. 19(1):1–17.
- Gannon L, Liu Y, Pegg N, Smith MJ. 2013. Effect of three-dimensional welding-induced residual stress and distortion fields on strength and behaviour of flat-bar stiffened panels. Ships Offshore Struct. 8(5):565–578.
- Gordo JM, Guedes Soares C. 1993. Approximate load shortening curves for stiffened plates under uniaxial compression. In: Faulkner D, Cowling MJ, Incecik A, Das PK, editors. Integrity of Offshore Structures-5. West Midlands (UK): Engineering Materials Advisory Service Ltd (EMAS). p. 189–211.
- Hansen AM. 1996. Strength of midship sections. Mar Struct. 9(3–4):471–494.
- [IACS] International Association of Classification Societies. 2010. Commons structural rules for double hull oil tankers. London: Author.
- Khan I, Zhang S. 2011. Effects of welding induced residual stress on ultimate strength of plates and stiffened panels. Ships Offshore Struct. 6(4):297–309.
- Michaleris P, DeBiccari A. 1997. Prediction of welding distortion. Weld Res Suppl Weld J. 76(6):172–181.
- Nagaraja Rao NR, Tall L. 1961. Residual stresses in welded plates. Weld J. 40:S468–S480.
- Ohtsubo H, Sumi Y, editors. 2000. ISSC report of special task committee VI. 2. Ultimate hull girder strength. Proceedings of the 14th International Ship and Offshore Structures Congress; Nagasaki, Japan.
- Rutherford, SE, Caldwell JB. 1990. Ultimate longitudinal strength of ships: a case study. Trans SNAME. 98:441–471.
- Smith CS, Bäcklund J, Bergan PG, Fujita Y, Jones N, Kmiecik M, Meijers P, Pedersen PT, Reckling KA, Stavovy AB. 1979. Nonlinear structural response. Proceedings of the 7th International Ship Structures Congress. Paris (France): Institut de Recherches Navale. Vol. 1; p. II.2-1–II.2-87.
- Smith CS, Anderson N, Chapman JC, Davidson PC, Dowling PJ. 1992. Strength of stiffened plating under combined compression and lateral pressure. Trans RINA. 134:131–147.
- Smith M. 2008. Ultimate strength assessment of naval and commercial ships. NS (Canada): DRDC Atlantic. TR 2008-059.
- Vhanmane S, Bhattacharya B. 2008. Evaluation of hull girder ultimate strength with initial imperfections. Ships Offshore Struct. 3(3):149–158.
- Yuan MG, Ueda Y. 1996. Prediction of residual stresses in welded T- and I-joints using inherent strains. J Eng Mater Technol. 118(2):229–234.