Prediction and parametric study on the severity of collapse of a capesize bulk carrier under extreme wave loads

References

• Caldwell JB. 1965. Ultimate longitudinal strength. Transactions Royal Institution of Naval Architects (RINA). 107:411–430.
   Google Scholar
• Fujikubo M, Yao T. 1999. Elastic local buckling strength of stiffened plate considering plate/stiffener interaction and welding residual stress. Mar Struct. 12:543–564.
   Google Scholar
• Hughes OF, Paik JK. 2010. Ship structural analysis and design. Jersey City, NJ (USA): Society of Naval Architects and Marine Engineers.
   Google Scholar
• Iijima K, Fujikubo M. 2010. Investigations into the target safety level of hull girder ultimate strength. Proceedings of the 4th International Maritime Conference on Design for Safety; Trieste, Italy.
   Google Scholar
• Iijima K, Kimura K, Xu W, Fujikubo M. 2011. Hydroelasto-plasticity approach to predicting the post-ultimate strength behaviour of a ship's hull girder in waves. J Mar Sci Technol. 16:379–389.
   Web of Science ®Google Scholar
• Iijima K, Suzaki Y, Masahiko Fujikubo M. 2014. Scaled model tests for the post-ultimate strength collapse behaviour of a ship's hull girder under whipping loads. Ships Offshore Struct. 1:1–8.
   Google Scholar
• Iijima K, Yao T, Moan T. 2008. Structural response of a ship in severe seas considering global hydroelastic vibrations. Mar Struct. 21:420–445.
   Web of Science ®Google Scholar
• Jensen JJ, Capul J. 2006. Extreme response predictions for jack-up units in second order stochastic wave by FORM. Probab Eng Mech. 21:330–337.
   Web of Science ®Google Scholar
• Kim DK, Park DH, Kim HB, Kim BJ, Seo JK, Paik JK. 2013. Lateral pressure effects on the progressive hull collapse behaviour of a Suezmax-class tanker under vertical bending moments. Ocean Eng. 63:112–121.
   Web of Science ®Google Scholar
• Kimura K. 2011. Hydro-elastoplasticity approach for post-ultimate strength behaviour of a hull girder in waves [master's thesis]. Osaka (Japan): Osaka University.
   Google Scholar
• Kimura K, Iijima K, Wada R, Xu W, Fujikubo M. 2010. Dynamic collapse behaviour of ship's hull girder in waves. Advanced Maritime Engineering Conference and 4th Pan Asian Association of Maritime Engineering Societies Forum; Singapore, p. 261–266.
   Google Scholar
• Lehmann E. 2006. Discussion on report of Committee III.1: ultimate strength. Proceedings of 16th ISSC, vol. 3; Southampton, UK, p. 121–131.
   Google Scholar
• Paik JK, Kim BJ, Seo JK. 2008a. Methods for ultimate limit state assessment of ships and ship-shaped offshore structures: part I unstiffened plates. Ocean Eng. 35(2):261–270.
   Web of Science ®Google Scholar
• Paik JK, Kim BJ, Seo JK. 2008b. Methods for ultimate limit state assessment of ships and ship-shaped offshore structures: part II stiffened panels. Ocean Eng. 35(2):271–280.
   Web of Science ®Google Scholar
• Paik JK, Kim BJ, Seo JK. 2008c. Methods for ultimate limit state assessment of ships and ship-shaped offshore structures: part III hull girders. Ocean Eng. 35(2):281–286.
   Web of Science ®Google Scholar
• Paik JK, Kim DK, Park DH, Kim HB, Mansour AE, Caldwell JB. 2011. Modified Paik-Mansour formula for ultimate strength calculations of ship hulls. Proceedings of the 3rd International Conference on Marine Structures (MARSTRUCT 2011); Hamburg, Germany, p. 187–202.
   Google Scholar
• Paik JK, Kim DK, Park DH, Kim HB, Mansour AE, Caldwell JB. 2013. Modified Paik–Mansour formula for ultimate strength calculations of ship hulls. Ships Offshore Struct. 8(3–4):245–260.
   Web of Science ®Google Scholar
• Paik JK, Seo JK, Kim DM. 2006. Idealized structural unit method and its application to progressive hull girder collapse analysis of ships. Ships Offshore Struct. 1(3):235–247.
   Google Scholar
• Paik JK, Thayamballi AK. 2003. Ultimate limit state design of steel plated structures. Chichester (UK): Wiley.
   Google Scholar
• Pei Z, Iijima K, Fujikubo M, Tanaka S, Okazawa S, Yao T. 2015. Simulation on progressive collapse behaviour of whole ship model under extreme waves using idealized structural unit method. Mar Struct. 40:104–133.
   Web of Science ®Google Scholar
• Smith CS. 1977. Influence of local compressive failure on ultimate longitudinal strength of a ship's hull. Proceedings of the PRADS, A-10; Tokyo, Japan, p. 73–79.
   Google Scholar
• Ueda Y, Rashed SMH. 1984. The idealized structural unit method and its application to deep girder structures. Comput Struct. 18(2):277–293.
   Web of Science ®Google Scholar
• Vhanmane S, Bhattacharya B. 2008. Estimation of ultimate hull girder strength with initial imperfections. Ships Offshore Struct. 3(3):149–158.
   Google Scholar
• Xu W, Iijima K, Fujikubo M. 2011a. Hydro-elastoplasticity approach to ship's hull girder collapse behaviour in waves. In: Guedes Soares C, Fricke W, editors. Advancements in marine structures. Hamburg (Germany): Taylor & Francis Group. p. 239–247.
   Google Scholar
• Xu W, Iijima K, Fujikubo M. 2011b. Investigation into post-ultimate strength behaviour of ship's hull girder in waves by analytical solution. Proceedings of the 30th International Conference on Ocean, Offshore and Arctic Engineering, OMAE2011; Rotterdam, Netherlands. OMAE2011–49617, p. 455–462.
   Google Scholar
• Xu W, Iijima K, Fujikubo M. 2012. Parametric dependencies of the post-ultimate strength behaviour of ship's hull girder in waves. J Mar Sci Technol. 17:203–215.
   Web of Science ®Google Scholar
• Yao T, Nikolov PI. 1991. Progressive collapse analysis of a ship's hull under longitudinal bending. J Soc Naval Archit Jpn. 170:449–461.
   Google Scholar
• Yao T, Astrup OC, Caridis P, Chen YN, Cho S-R, Dow RS, Niho O, Rigo P. 2000. Special task committee VI.2: ultimate hull girder strength. Proceedings of the 14th International Ship and Offshore Structures Congress; Nagasaki, Japan.
   Google Scholar
• Zhang S, Khan I. 2009. Buckling and ultimate capability of plates and stiffened panels in axial compression. Mar Struct. 22(4):791–808.
   Web of Science ®Google Scholar