Fatigue damage criteria classification, modelling developments and trends for welded joints in marine structures

References

• Adepipe O, Brennan F, Kolios A. 2015. Corrosion fatigue crack growth in offshore wind monopile steel HAZ material. In: Soraes CG, Shenoi RA, editors. Analysis and design of marine structures V. London: CRC Press; p.–207–212. ISBN: 978-1-138-02789-3.
   Google Scholar
• Adepipe O, Brennan F, Kolios A. 2016. A relative crack opening time correlation for corrosion fatigue crack growth in offshore structures. Fatigue Fract Eng Mater Struct. 39:395–411. doi: 10.1111/ffe.12364
   Web of Science ®Google Scholar
• Amiri-Rad A, Maskayekhi M, Van der Meer F, Hadavinia H. 2015. A two-scale damage model for high cycle fatigue delamination in laminated composites. Compos Sci Technol. 120:32–38. doi: 10.1016/j.compscitech.2015.10.010
   Web of Science ®Google Scholar
• Barsoum Z, Lundbäck A. 2009. Simplified FE welding simulation of fillet welds–3D effects on the formation of residual stresses. Eng Failure Anal. 16:2281–2289. doi: 10.1016/j.engfailanal.2009.03.018
   Web of Science ®Google Scholar
• Bathias C. 2014. Fatigue limit in metals. Hoboken (NJ): Wiley-ISTE. ISBN: 978-1-848-21476-7.
   Google Scholar
• Brandt U, Lawrence FV, Sonsino CM. 2001. Fatigue crack initiation and growth in AlMg4.5Mn butt weldments. Fatigue Fract Eng Mater Struct. 24:117–126. doi: 10.1046/j.1460-2695.2001.00372.x
   Web of Science ®Google Scholar
• Carpinteri A, Spagnoli A, Vantadori S. 2009. Multiaxial fatigue life estimation in welded joints using the critical plane approach. Int J Fatigue. 31:188–196. doi: 10.1016/j.ijfatigue.2008.03.024
   Web of Science ®Google Scholar
• Chakherlou TN, Taghizadeh H, Mirzajanzadeh M, Aghdam AB. 2012. On the prediction of fatigue life in double shear lap joints including interference fitted pin. Eng Fract Mech. 96:340–354. doi: 10.1016/j.engfracmech.2012.08.023
   Web of Science ®Google Scholar
• Charkaluk E, Constantinescu A, Maïtournam H, Dang Van K. 2009. Revisiting the Dang Van criterion. Procedia Eng. 1:143–146. doi: 10.1016/j.proeng.2009.06.033
   Google Scholar
• Chattopadhyay A, Glinka G, El-Zein M, Qian J, Formas R. 2011. Stress analysis and fatigue of welded structures. Weld World. 55:2–21. doi: 10.1007/BF03321303
   Web of Science ®Google Scholar
• Cristofori A, Susmel L, Tovo R. 2008. A stress invariant based criterion to estimate fatigue damage under multiaxial loading. Int J Fatigue. 30:1646–1658. doi: 10.1016/j.ijfatigue.2007.11.006
   Web of Science ®Google Scholar
• Crossland B. 1956. Effect of large hydrostatic stress on the torsional fatigue strength of an alloy steel. In Proceeding of the International Conference on Fatigue of Metals, Institution of Mechanical Engineers; London, United Kingdom. p. 138–149.
   Google Scholar
• Cui W. 2002. A state-of-the-art review on fatigue life prediction methods for metal structures. J Marine Sci Technol. 7:43–56. doi: 10.1007/s007730200012
   Web of Science ®Google Scholar
• Cui W, Huang X, Wang F. 2014. Towards a unified fatigue life prediction method for marine structures. Berlin: Springer. ISBN: 978-3-642-41830-3.
   Google Scholar
• Cui W, Wang F, Huang X. 2011. A unified fatigue life prediction method for marine structures. Marine Struct. 24:153–181. doi: 10.1016/j.marstruc.2011.02.007
   Web of Science ®Google Scholar
• Dang Van K. 1993. Macro-micro approach in high-cycle multiaxial fatigue. In: McDowell DL, Ellis R, editors. Proceedings of the Advances in Multiaxial Fatigue, ASTM STP 1191. Philadelphia (PA): ASTM; p. 120–130.
   Google Scholar
• Dang Van K. 1999. Multiaxial fatigue limit criterion of metals: a mesoscopic approach. In: Dang Van K, Papadopoulos IV., editors High-cycle metal fatigue, from theory to applications. CISM courses and lectures No. 392. International Centre for Mechanical Sciences. Springer-Verlag Wien GmbH; p. 57–88. ISBN: 978-3-211-831441.
   Google Scholar
• Dang Van K, Bignonnet A, Fayard JL, Janosch JJ. 2001. Assessment of welded structures by a local multiaxial fatigue approach. Fatigue Fract Eng Mater Struct. 24:369–376. doi: 10.1046/j.1460-2695.2001.00399.x
   Web of Science ®Google Scholar
• Danzer R, Supancic P, Pascual J, Lube T. 2007. Fracture statistics of ceramics–Weibull statistics and deviations from Weibull statistics. Eng Fract Mech. 74:2919–2932. doi: 10.1016/j.engfracmech.2006.05.028
   Web of Science ®Google Scholar
• Darcis P, Lassen T, Recho N. 2006. Fatigue behaviour of welded joints part 2–physical modelling of the fatigue process. Weld J. 85:19s–26s.
   Web of Science ®Google Scholar
• Den Besten JH. 2015. Fatigue resistance of welded joints in aluminium high-speed craft: a total stress concept [PhD thesis]. Delft: Delft University of Technology.
   Google Scholar
• DNV-GL classification note 30.7 (2014). Fatigue assessment of ship structures.
   Google Scholar
• Donald KJ, Paris PC. 1999. An evaluation of ΔKeff estimation procedures on 6061-T6 and 2024-T3 aluminium alloys. Int J Fatigue. 21:47–57. doi: 10.1016/S0142-1123(99)00055-9
   Web of Science ®Google Scholar
• Dong P. 2001. A structural stress definition and numerical implementation for fatigue analysis of welded joints. Int J Fatigue. 23:865–876. doi: 10.1016/S0142-1123(01)00055-X
   Web of Science ®Google Scholar
• Dong P. 2003. A robust structural stress method for fatigue analysis of ship structures. In: Proceedings of the 22nd International Conference on Offshore Mechanics and Arctic Engineering, OMAE 2003; Jun 8–13; Cancun, Mexico: ASME.
   Google Scholar
• Dong P. 2004. The mesh-insensitive structural stress and master S-N curve method for ship structures. In: Proceedings of the 23rd International Conference on Offshore Mechanics and Arctic Engineering, OMAE 2004; Aug 30--Sep 2; Vancouver, Canada. Houston (TX): ASME.
   Google Scholar
• Dong P. 2008. Length scale of secondary stresses in fracture and fatigue. Int J Pressure Vessels Pip. 85:128–143. doi: 10.1016/j.ijpvp.2007.10.005
   Web of Science ®Google Scholar
• Dong P, Hong JK. 2001. Residual stresses, notch stress and stress intensities at welds: an unified assessment procedure with self-consistency. In: Proceeding of the 16th International Conference on Structural Mechanics in Reactor Technology, SMiRT 16; Washington, DC.
   Google Scholar
• Dong P, Hong JK. 2004. The master S-N curve approach to fatigue evaluation of offshore and marine structures. In: ASME, editor. Proceedings of the 23rd International Conference on Offshore Mechanics and Arctic Engineering, OMAE 2004. Vancouver, British Columbia, Canada.
   Google Scholar
• Dong P, Hong JH. 2006. A robust structural stress parameter for evaluation of multiaxial fatigue of weldments. J ASTM Int. 3:100348. doi: 10.1520/JAI100348
   Google Scholar
• Dong P, Hong JK, Cao Z. 2003. Stresses and stress intensities at notches: ‘anomalous crack growth’ revisited. Int J Fatigue. 25:811–825. doi: 10.1016/S0142-1123(03)00130-0
   Web of Science ®Google Scholar
• Dong P, Hong JK, Cao Z. 2004. A robust K estimation scheme using mesh-insensitive structural stresses. Weld World. 48:28–39.
   Google Scholar
• Dong P, Hong JK, De Jesus AMP. 2007. Analysis of recent fatigue data using the structural stress procedure in ASME Div. J Press Vessel Technol. 129:355–362. doi: 10.1115/1.2748818
   Web of Science ®Google Scholar
• Dong P, Pei X, Xing S, Kim MH. 2014. A structural strain method for low-cycle fatigue evaluation of welded components. Int J Press Vessel Pip. 119:39–51. doi: 10.1016/j.ijpvp.2014.03.003
   Web of Science ®Google Scholar
• Dong P, Wei Z, Hong ZW. 2010. A path-dependent cycle counting method for variable-amplitude multi0axial loading. Int J Fatigue. 32:720–734. doi: 10.1016/j.ijfatigue.2009.10.010
   Web of Science ®Google Scholar
• Elber W. 1971. The significance of fatigue crack closure. In: ASTM, editor. Proceedings of the Damage tolerance in aircraft structures, ASTM STP 486, American Society for Testing and Materials. p. 230–242.
   Google Scholar
• El Haddad MH, Smith KN, Topper TH. 1979. Fatigue crack propagation at short cracks. J Eng Mater Technol. 101:42–46. doi: 10.1115/1.3443647
   Web of Science ®Google Scholar
• Endo M, McEvily AJ. 2007. Prediction of the behaviour of small fatigue cracks. Mat Sci Eng. 468–470:51–58. doi: 10.1016/j.msea.2006.09.084
   Google Scholar
• Erny C, Thevenet D, Cognard J, Körner M. 2012. Fatigue life prediction of welded ship details. Mar Struct. 25:13–32. doi: 10.1016/j.marstruc.2011.10.001
   Web of Science ®Google Scholar
• Eurocode 3. Design of steel structures–part 1-9: fatigue. 2006. EN-1993-1-9. Brussels: CEN.
   Google Scholar
• Eurocode 9. Design of aluminium structures–part 1-3: structures susceptible to fatigue 2007. EN-1999-1-3. Brussels: CEN.
   Google Scholar
• Ferro P, Berto F, Lazzarin P. 2005. Generalised stress intensity factors due to steady and transient thermal loads with applications to welded joints. Fatigue Fract Eng Mater Struct. 29:440–453. doi: 10.1111/j.1460-2695.2006.01015.x
   Web of Science ®Google Scholar
• Fricke W. 2002. Recommended hot-spot analysis procedure for structural details of ships and FPSO's based on round-robin FE analyses. Int J Offshore Polar Eng. 12:40–47.
   Web of Science ®Google Scholar
• Fricke W. 2003. Fatigue analysis of welded joints: state of development. Mar Struct. 16:185–200. doi: 10.1016/S0951-8339(02)00075-8
   Web of Science ®Google Scholar
• Fricke W. 2015. Recent developments and future challenges in fatigue strength assessment of welded joints. Proc Inst Mech Eng. 229:1224–1239.
   Web of Science ®Google Scholar
• Fricke W, Bollero A, Chirica I, Garbatov Y, Jancart F, Kahl A, Remes H, Rizzo CM, Von Selle H., Urban A, et al. 2008. Round robin study on structural hot-spot and effective notch stress analysis. Ships Offshore Struct. 3:335–345. doi: 10.1080/17445300802371261
   Google Scholar
• Fricke W, Codda M, Feltz O, Garbatov Y, Remes H, Risso G, Rizzo C, Romanoff J. 2013. Round robin study on local stress and fatigue assessment of lap joints and doubler plates. Ships Offshore Struct. 8:621–627. doi: 10.1080/17445302.2012.762727
   Web of Science ®Google Scholar
• Fricke W, Paetzold H. 2010. Full-scale fatigue tests of ship structures to validate the S-N approaches for fatigue strength assessment. Mar Struct. 23:115–130. doi: 10.1016/j.marstruc.2010.01.004
   Web of Science ®Google Scholar
• Frost NE, Dugdale DS. 1958. The propagation of fatigue cracks in sheet specimens. J Mech Phys Solids. 6:92–110. doi: 10.1016/0022-5096(58)90018-8
   Web of Science ®Google Scholar
• Gavras AG, Lados DA, Donald JK. 2013. A unified method of design for fatigue crack growth resistance in structural materials. Int J Fatigue. 47:58–70. doi: 10.1016/j.ijfatigue.2012.07.009
   Web of Science ®Google Scholar
• Guedes Soares C, Garbatov Y, Zayed A, Wang G. 2009. Influence of environmental factors on corrosion of ship structures in marine atmosphere. Corros Sci. 51:2014–2026. doi: 10.1016/j.corsci.2009.05.028
   Web of Science ®Google Scholar
• Glinka G. 1985. Energy density approach to calculation of inelastic strain-stress near notches and cracks. Eng Fract Mech. 22:485–508. doi: 10.1016/0013-7944(85)90148-1
   Web of Science ®Google Scholar
• Gough HJ, Pollard HV. 1935. The strength of metals under combined alternating stresses. Proc Inst Mech Eng. 131:3–103. doi: 10.1243/PIME_PROC_1935_131_008_02
   Google Scholar
• Hertel O, Vormwald M. 2014. Multiaxial fatigue assessment based on a short crack growth concept. Theor Appl Fract Mech. 73:17–26. doi: 10.1016/j.tafmec.2014.06.010
   Web of Science ®Google Scholar
• Hobbacher AF. 2009. The new IIW recommendations for fatigue assessment of welded joints and components–a comprehensive code recently updated. Int J Fatigue. 31:50–58. doi: 10.1016/j.ijfatigue.2008.04.002
   Web of Science ®Google Scholar
• Hobbacher AF. 2010. New developments at the recent update of the IIW recommendations for fatigue of welded joints and components. Steel Constr. 4:231–242. doi: 10.1002/stco.201010030
   Google Scholar
• Hobbacher AF. 2016. Recommendations for fatigue design of welded joints and components. 2nd ed. Switzerland: Springer International. ISBN: 978-3319237565.
   Google Scholar
• Hofmann F, Bertolino G, Constantinescu A, Ferjani M. 2009. Numerical exploration of the Dang Van high cycle fatigue criterion: application to gradient effects. J Mech Mater Struct. 4:293–308. doi: 10.2140/jomms.2009.4.293
   Web of Science ®Google Scholar
• Hong JK. 2010. Evaluation of weld root failure using Battelle structural stress method. In: ASME, editor. Proceedings of the ASME 29th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2010, Shanghai, China.
   Google Scholar
• Hong JK, Forte TP. 2014. Fatigue evaluation procedures for multiaxial loading in welded structures using Battelle structural stress approach. In: ASME, editor. Proceedings of the 33rd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2014; San Francisco (CA): ASME.
   Google Scholar
• Huang X, Moan T, Cui W. 2009. A unique crack growth rate curve method for fatigue life prediction of steel structures. Ships Offshore Struct. 4:165–173. doi: 10.1080/17445300902732370
   Web of Science ®Google Scholar
• Huffman PJ. 2016. A strain energy based damage model for fatigue crack initiation and growth. Int J Fatigue. 88:197–204. doi: 10.1016/j.ijfatigue.2016.03.032
   Web of Science ®Google Scholar
• Jakubowski M. 2014. Influence of pitting corrosion on fatigue and corrosion fatigue of ship structures–part I. Pol Maritime Res. 21:62–69.
   Web of Science ®Google Scholar
• Jakubowski M. 2015. Influence of pitting corrosion on fatigue and corrosion fatigue of ship and offshore structures–part II. Pol Maritime Res. 22:57–66.
   Web of Science ®Google Scholar
• Janssen M, Zuidema J, Wanhill RJH. 2002. Fracture mechanics. 2nd ed. Delft: Delft University Press. ISBN: 90-407-2221-8.
   Google Scholar
• Jiang C, Liu ZC, Wang XG, Zhang Z, Long XY. 2016. A structural stress-based critical plane method for multiaxial fatigue life estimation in welded joints. Fatigue Fract Eng Mater Struct. 39:372–383. doi: 10.1111/ffe.12369
   Web of Science ®Google Scholar
• Jones R, Chen B, Pitt S. 2007. Similitude: fatigue cracking in steels. Theor Appl Fract Mech. 48:161–168. doi: 10.1016/j.tafmec.2007.05.007
   Web of Science ®Google Scholar
• Jones R, Molent L, Pitt S. 2007. Crack growth of physically small cracks. Int J Fatigue. 29:1658–1667. doi: 10.1016/j.ijfatigue.2007.01.031
   Web of Science ®Google Scholar
• Kim JS, Kim C, Jin TE, Dong P. 2006. Mean load effect on fatigue of welded joints using structural stress and fracture mechanics approach. Nucl Eng Technol. 38:277–284.
   Google Scholar
• Kim Y, Oh JS, Jeon SH. 2015. Novel hot spot stress calculations for welded joints using 3D solid finite elements. Mar Struct. 44:1–18. doi: 10.1016/j.marstruc.2015.07.004
   Web of Science ®Google Scholar
• Kondo Y. 1989. Prediction of fatigue crack initiation life based on pit growth. Corrosion. 45:7–11. doi: 10.5006/1.3577891
   Web of Science ®Google Scholar
• Krebs J, Kassner M. 2007. Influence of welding residual stresses on fatigue design of welded joints and components. Weld World. 51:54–68. doi: 10.1007/BF03266586
   Google Scholar
• Krupp U. 2007. Fatigue crack propagation in metals and alloys. Weinheim: Wiley-VCH Verlag GmbH & Co. KGaA. ISBN: 978-3-527-31537-6.
   Google Scholar
• Kujawski D. 2001. A fatigue crack driving force parameter with load ratio effects. Int J Fatigue. 23:239–246. doi: 10.1016/S0142-1123(01)00158-X
   Web of Science ®Google Scholar
• Lassen T. 1990. The effect of the welding process on the fatigue crack growth. Weld J. 69:75s–81s.
   Web of Science ®Google Scholar
• Lassen T, Recho N. 2009. Proposal for a more accurate physically based S-N curve for welded steel joints. Int J Fatigue. 31:70–78. doi: 10.1016/j.ijfatigue.2008.03.032
   Web of Science ®Google Scholar
• Lassen T, Darcis P, Recho N. 2005. Fatigue behavior of welded joints part 1 – statistical methods for fatigue life prediction. Weld J. 84:183s–187s.
   Web of Science ®Google Scholar
• Lazzarin P, Filippi S. 2006. A generalized stress intensity factor to be applied to rounded V-shaped Notches. Int J Solids Struct. 43:2461–2478. doi: 10.1016/j.ijsolstr.2005.03.007
   Web of Science ®Google Scholar
• Lazzarin P, Livieri P. 2001. Notch stress intensity factors and fatigue strength of aluminium and steel welded joints. Int J Fatigue. 23:225–232. doi: 10.1016/S0142-1123(00)00086-4
   Web of Science ®Google Scholar
• Lazzarin P, Sonsino CM, Zambardi R. 2004. A notch stress intensity approach to assess the multiaxial fatigue strength of welded tube-to-flange joints subjected to combined loadings. Fatigue Fract Eng Mater Struct. 27:127–140. doi: 10.1111/j.1460-2695.2004.00733.x
   Web of Science ®Google Scholar
• Lazzarin P, Tovo R. 1998. A notch intensity factor approach to the stress analysis of welds. Fatigue Fract Eng Mater Struct. 21:1089–1103. doi: 10.1046/j.1460-2695.1998.00097.x
   Web of Science ®Google Scholar
• Lazzarin P, Zambardi R. 2001. A finite-volume-energy based approach to predict the static and fatigue behaviour of components with sharp V-shaped notches. Int J Fract. 112:275–298. doi: 10.1023/A:1013595930617
   Web of Science ®Google Scholar
• Lazzarin P, Zambardi R. 2002. The equivalent strain energy density approach reformulated and applied to sharp V-shaped notches under localized and generalized plasticity. Fatigue Fract Eng Mater Struct. 25:917–928. doi: 10.1046/j.1460-2695.2002.00543.x
   Web of Science ®Google Scholar
• Lemaitre J, Chaboche JL. 1994. Mechanics of solid materials. 1st ed. Cambridge (UK): Cambridge University Press. ISBN: 0521477581.
   Google Scholar
• Lemaitre J, Sermage JP, Desmorat R. 1999. A two scale damage concept applied to fatigue. Int J Fract. 97:67–81. doi: 10.1023/A:1018641414428
   Web of Science ®Google Scholar
• Liu G, Liu Y, Huang Y. 2014. A novel structural stress approach for multi-axial fatigue strength assessment of welded joints. Int J Fatigue. 63:171–182. doi: 10.1016/j.ijfatigue.2014.01.022
   Web of Science ®Google Scholar
• Liu Y, Mahadevan S. 2009. Fatigue limit prediction of notched components using short crack growth theory and an asymptotic interpolation method. Eng Fract Mech. 76:2317–2331. doi: 10.1016/j.engfracmech.2008.06.006
   Web of Science ®Google Scholar
• Livieri P, Lazzarin P. 2005. Fatigue strength of steel and aluminium welded joints based on generalised stress intensity factors and local strain energy values. Int J of Fracture. 133:247–276. doi: 10.1007/s10704-005-4043-3
   Web of Science ®Google Scholar
• Lotsberg I. 2009. Assessment of design criteria for fatigue cracking from weld toes subjected to proportional loading. Ships Offshore Struct. 4:175–187. doi: 10.1080/17445300902733998
   Web of Science ®Google Scholar
• Lotsberg I. 2016. Fatigue design of marine structures. New York (NY): Cambridge University Press. ISBN: 978-1107121331.
   Google Scholar
• Lotsberg I, Landet E. 2005. Fatigue capacity of side longitudinals in floating structures. Mar Struct. 18:25–42. doi: 10.1016/j.marstruc.2005.08.002
   Web of Science ®Google Scholar
• Maddox SJ. 1975. The effect of mean stress on fatigue crack propagation; a literature review. Int J Fract. 11:389–408. doi: 10.1007/BF00038890
   Web of Science ®Google Scholar
• Maddox SJ. 2003. Review of fatigue assessment procedures for welded aluminium structures. Int J Fatigue. 25:1359–1378. doi: 10.1016/S0142-1123(03)00063-X
   Web of Science ®Google Scholar
• Marquis G, Samuelsson J. 2005. Modelling of fatigue life assessment of complex structures. Materialwissenschaft und Werkstofftechnik. 36:678–684. doi: 10.1002/mawe.200500938
   Web of Science ®Google Scholar
• Marquis GB, Socie DF. 2003. Multiaxial fatigue. In: Ritch RO, Murakami Y, editors. Comprehensive structural integrity, fracture of materials from nano to macro (voume 4: cyclic loading and fatigue). Elsevier. Chapter 9; p. 221–252.
   Google Scholar
• McEvily AJ. 1983. On the quantitative analysis of fatigue crack propagation. In: Proceedings of the Fatigue Mechanisms: Advances in Quantitative Measurements of Physical Damage, STM STP 811. American Society for Testing and Materials (ASTM). p. 283–312.
   Google Scholar
• McEvily AJ, Ishihara S. 2001. On the dependence of the rate of fatigue crack growth on the σ(2a) parameter. Int J Fatigue. 23:115–120. doi: 10.1016/S0142-1123(00)00080-3
   Web of Science ®Google Scholar
• McEvily AJ, Endo M, Murakami Y. 2003. On the area relationship and the short fatigue crack threshold. Fatigue Fract Eng Mater Struct. 26:269–278. doi: 10.1046/j.1460-2695.2003.00636.x
   Web of Science ®Google Scholar
• McEvily AJ, Minakawa K. 1984. Crack closure and the growth of short and long fatigue cracks. Scripta Metallurgica. 18:71–76. doi: 10.1016/0036-9748(84)90092-9
   Google Scholar
• Mei J, Dong P. 2016. A new path-dependent fatigue damage model for non-proportional multi-axial loading. Int J Fatigue. 90:210–221. doi: 10.1016/j.ijfatigue.2016.05.010
   Web of Science ®Google Scholar
• Meneghetti G, Campagnolo A, Berto F. 2015. Fatigue strength assessment of partial and full-penetration steel and aluminium butt-welded joints according to the peak stress method. Fatigue Fract Eng Mater Struct. 38:1419–1431. doi: 10.1111/ffe.12342
   Web of Science ®Google Scholar
• Meneghetti G, Lazzarin P. 2006. Significance of the elastic peak stress evaluated by FE analyses at the point of singularity of sharp V-notched components. Fatigue Fract Eng Mater Struct. 30:95–106. doi: 10.1111/j.1460-2695.2006.01084.x
   Web of Science ®Google Scholar
• Meneghetti G, Lazzarin P. 2011. The peak stress method for fatigue strength assessment of welded joints with weld toe or weld root failures. Weld World. 55:22–29. doi: 10.1007/BF03321304
   Web of Science ®Google Scholar
• Mikheevskiy S, Glinka G, Cordes T. 2015. Total life approach for fatigue estimation of welded structures. Proceedings of 3rd International Conference on Material and Component Performance under Variable Amplitude Loading, VAL2015. Procedia Eng. 101:177–184. doi: 10.1016/j.proeng.2015.02.023
   Google Scholar
• Mohammadi M, Zehsaz M, Hassanifard S, Rahmatfam A. 2016. An evaluation of total fatigue life prediction of a notched shaft subjected to cyclic bending load. Eng Fract Mech. 166:128–138. doi: 10.1016/j.engfracmech.2016.08.027
   Web of Science ®Google Scholar
• Molent L, Jones R, Barter S, Pitt S. 2006. Recent developments in fatigue crack growth assessment. Int J Fatigue. 28:1759–1768. doi: 10.1016/j.ijfatigue.2006.01.004
   Web of Science ®Google Scholar
• Montesano J, Chu H, Sing CV. 2016. Development of a physics-based multi-scale progressive damage model for assessing the durability of wind turbine blades. Compos Struct. 141:50–62. doi: 10.1016/j.compstruct.2016.01.011
   Web of Science ®Google Scholar
• Murakami S. 2012. Continuum damage mechanics: a continuum damage mechanics approach to the analysis of damage and fracture. Dordrecht: Springer. ISBN: 978-94-007-2666-6.
   Google Scholar
• Neuber H. 1937, 1958, 1985, 2001. Kerbspannungslehre (4. Aufl.). Berlin: Springer-Verlag. ISBN: 3-540-67657-0.
   Google Scholar
• Niemi E, Fricke W, Maddox SJ. 2006. Fatigue analysis of welded components–designer's guide to the structural hot spot stress approach. Abington (PA): Woodhead Publishing Limited. ISBN: 978-1-84569-124-0.
   Google Scholar
• Noroozi AH, Glinka G, Lambert S. 2005. A two parameter driving force for fatigue crack growth analysis. Int J Fatigue. 27:1277–1296. doi: 10.1016/j.ijfatigue.2005.07.002
   Web of Science ®Google Scholar
• Obrtlík K, Man J, Polák J. 2004. Effect of mean stress on short crack growth in fatigued 316L stainless steel. In: Proceedings of the 15th European Conference on Fracture, ECF15; Stockholm, Sweden.
   Google Scholar
• Papadopoulos IV, Davoli P, Gorla C, Filippini M, Bernasconi A. 1997. A comparative study of multiaxial high-cycle fatigue criteria for metals. Int J Fatigue. 19:219–235. doi: 10.1016/S0142-1123(96)00064-3
   Web of Science ®Google Scholar
• Paris PC, Erdogan F. 1963. Critical analysis of crack growth propagation laws. J Basic Eng. 85:528–534. doi: 10.1115/1.3656900
   Google Scholar
• Pedersen MM. 2016. Multiaxial fatigue assessment of welded joints using the notch stress approach. Int J Fatigue. 83:269–279. doi: 10.1016/j.ijfatigue.2015.10.021
   Web of Science ®Google Scholar
• Peterson RE. 1938. Methods of correlating data from fatigue tests of stress concentration specimens. In: Stephen Timoshenko 60th anniversary volume. New York (NY): The Macmillan Company; p. 179.
   Google Scholar
• Poutiainen I, Marquis G. 2004. A single-point structural stress assessment procedure for load-carrying fillet welds. In: Proceedings of theIIW document XIII-2013-04, International Institute of Welding.
   Google Scholar
• Poutiainen I, Marquis G. 2006. A fatigue assessment method based on weld stress. Int J Fatigue. 28:1037–1046. doi: 10.1016/j.ijfatigue.2005.11.007
   Web of Science ®Google Scholar
• Pyttel B, Schwerdt D, Berger C. 2011. Very high cycle fatigue–is there a fatigue limit? Int J Fatigue. 33:49–58. doi: 10.1016/j.ijfatigue.2010.05.009
   Web of Science ®Google Scholar
• Radaj D. 2014. State-of-the-art review on extended stress intensity factor concepts. Fatigue Fract Eng Mater Struct. 37:1–28. doi: 10.1111/ffe.12120
   Web of Science ®Google Scholar
• Radaj D. 2015. State-of-the-art review on the local strain energy density concept and its relation to the J-integral and peak stress method. Fatigue Fract Eng Mater Struct. 38:2–28. doi: 10.1111/ffe.12231
   Web of Science ®Google Scholar
• Radaj D, Lazzarin P, Berto F. 2013. Generalised Neuber concept of fictitious notch rounding. Int J Fatigue. 51:105–115. doi: 10.1016/j.ijfatigue.2013.01.005
   Web of Science ®Google Scholar
• Radaj D, Sonsino CM, Fricke W. 2006. Fatigue assessment of welded joints by local approaches. 2nd ed. Cambridge (UK): Woodhead Publishing Limited. ISBN: 978-1855739482.
   Google Scholar
• Radaj D, Vormwald M. 2013. Advanced methods of fatigue assessment. 1st ed. Berlin: Springer.
   Google Scholar
• Ritchie RO, Yu W, Holm DK, Blom AF. 1988. Development of fatigue crack closure with the extension of long and short cracks in aluminium alloy 2124: a comparison of experimental and numerical results. In: Proceedings of the Mechanics of Fatigue Crack Closure, ASTM STP 982. American Society for Testing and Materials (ASTM). p. 300–316. doi: 10.1520/STP27217S
   Google Scholar
• Rizzo CM. 2011. Application of advanced notch stress approaches to assess fatigue strength of ship structural details: literature review. Hamburg-Harburg: Schriftenreihe Schiffbau. ISBN: 978-38922065 52.
   Google Scholar
• Rizzo CM, Fricke W. 2013. Fatigue assessment of bulb stiffener joints according to local approaches. Ships Offshore Struct. 8:73–83. doi: 10.1080/17445302.2011.647805
   Web of Science ®Google Scholar
• Rother K, Fricke W. 2016. Effective notch stress approach for welds having low stress concentration. Int J Press Vessel Pip. 147:12–20. doi: 10.1016/j.ijpvp.2016.09.008
   Web of Science ®Google Scholar
• Rozumek D, Macha E. 2009. A survey of failure criteria and parameters in mixed-mode fatigue crack growth. Mater Sci. 45:190–210. doi: 10.1007/s11003-009-9179-2
   Web of Science ®Google Scholar
• Sadananda K, Vasudevan AK. 1998. Short crack growth and internal stresses. Int J Fatigue. 19(supp. 1):s99–s108.
   Google Scholar
• Sadananda K, Vasudevan AK. 2004. Crack tip driving forces and crack growth representation under fatigue. Int J Fatigue. 26:39–47. doi: 10.1016/S0142-1123(03)00105-1
   Web of Science ®Google Scholar
• Schijve J. 1988. Fatigue crack closure: observations and technical significance. In: Proceedings of the Mechanics of Fatigue Crack Closure, ASTM STP 982, American Society for Testing and Materials. p. 5–34. doi: 10.1520/STP27198S
   Google Scholar
• Schijve J. 2009. Fatigue of structures and materials. 2nd ed. Berlin: Springer. ISBN: 978-402068089.
   Google Scholar
• Schijve J. 2012. Fatigue predictions of welded joints and the effective notch stress concept. Int J Fatigue. 45:31–38. doi: 10.1016/j.ijfatigue.2012.06.016
   Web of Science ®Google Scholar
• Sehitoglu H, Gall K, García AM. 1996. Recent advances in fatigue crack growth modelling. Int J Fatigue. 80:165–192.
   Google Scholar
• Shen W, Yan R, Barltrop N, Liu E, Song L. 2016. A method of determining structural stress for fatigue strength evaluation of welded joints based on notch stress strength theory. Int J Fatigue. 90:87–98. doi: 10.1016/j.ijfatigue.2016.04.014
   Web of Science ®Google Scholar
• Silitonga S, Maljaars J, Soetens F, Snijder HH. 2013. Survey on damage mechanics models for fatigue life prediction. Heron. 58:25–54.
   Google Scholar
• Smith RN, Watson P, Tupper TH. 1970. A stress-strain parameter for the fatigue of metals. J Mater. 5:767–778.
   Web of Science ®Google Scholar
• Socie DF, Morrow J, Chen W. 1979. A procedure for estimating the total fatigue life of notched and cracked members. Eng Fract Mech. 11:851–859. doi: 10.1016/0013-7944(79)90142-5
   Web of Science ®Google Scholar
• Sonsino CM. 1997. Fatigue behaviour of welded components under complex elasto-plastic multiaxial deformations. Brussels: ECCS. EU-report no: 16024.
   Google Scholar
• Sonsino CM. 2009. A consideration of allowable equivalent stresses for fatigue design of welded joints according to the notch stress concept with the reference radii rref = 1.00 and 0.05 mm. Weld World. 53:(3–4):R64–R75. doi: 10.1007/BF03266705
   Web of Science ®Google Scholar
• Sonsino CM, Fricke W, de Bruyne F, Hoppe A, Ahmadi A, Zhang G. 2012. Notch stress concepts for the fatigue assessment of welded joints–background and applications. Int J Fatigue. 34:2–16. doi: 10.1016/j.ijfatigue.2010.04.011
   Web of Science ®Google Scholar
• Sonsino CM, Kueppers M. 2001. Multiaxial fatigue of welded joints under constant and variable amplitude loadings. Fatigue Fract Eng Mater Struct. 24:309–327. doi: 10.1046/j.1460-2695.2001.00393.x
   Web of Science ®Google Scholar
• Sonsino CM, Lagoda T. 2004. Assessment of multiaxial fatigue behaviour of welded joints under combined bending and torsion by application of a fictitious notch radius. Int J Fatigue. 26:265–279. doi: 10.1016/S0142-1123(03)00143-9
   Web of Science ®Google Scholar
• Spagnoli A. 2005. Self-similarity and fractals in the Paris range of fatigue crack growth. Mech Mater. 37:519–529. doi: 10.1016/j.mechmat.2004.04.003
   Web of Science ®Google Scholar
• Sumi Y, Inoue T. 2011. Multi-scale modelling of fatigue crack propagation applied to random sequence of clustered loading. Mar Struct. 24:117–131. doi: 10.1016/j.marstruc.2011.02.003
   Web of Science ®Google Scholar
• Susmel L. 2008. The theory of critical distances: a review of its applications in fatigue. Eng Fract Mech. 75:1706–1724. doi: 10.1016/j.engfracmech.2006.12.004
   Web of Science ®Google Scholar
• Susmel L, Lazzarin P. 2002. A bi-parametric Wöhler curve for high cycle multiaxial fatigue assessment. Fatigue Fract Eng Mater Struct. 25:63–78. doi: 10.1046/j.1460-2695.2002.00462.x
   Web of Science ®Google Scholar
• Susmel L, Taylor D. 2007. A novel formulation of the theory of critical distances to estimate lifetime of notched components in the medium-cycle fatigue regime. Fatigure Fract Eng Mater Struct. 30:567–581. doi: 10.1111/j.1460-2695.2007.01122.x
   Web of Science ®Google Scholar
• Taylor D. 2007. The theory of critical distances; a new perspective in fracture mechanics. Oxford: Elsevier. ISBN: 978-0-08-044478-9.
   Google Scholar
• Teng T, Chang P. 2004. Effect of residual stresses on the fatigue crack initiation life for butt-welded joints. J Mater Process Technol. 145:325–335. doi: 10.1016/j.jmatprotec.2003.07.012
   Web of Science ®Google Scholar
• Todinov MT. 2009. Is Weibull distribution the correct model for predicting probability of failure initiated by non-interacting flaws? Int J Solids Struct. 46:887–901. doi: 10.1016/j.ijsolstr.2008.09.033
   Web of Science ®Google Scholar
• Van Lieshout PL, den Besten JH, Kaminski ML. 2016. Comparative study of multiaxial fatigue methods applied to welded joints in marine structures. Frattura ed Integratà Strutturale. 37:173–192.
   Google Scholar
• Van Lieshout PL, den Besten JH, Kaminski ML. 2017. Multiaxial fatigue assessment of welded joints in marine structures. International Shipbuilding Progress. doi:10.3233/ISP-170141.
   Google Scholar
• Verreman Y, Nie B. 1996. Early development of fatigue cracking at manual fillet welds. Fatigue Fract Eng Mater Struct. 19:669–681. doi: 10.1111/j.1460-2695.1996.tb01312.x
   Web of Science ®Google Scholar
• Walker K. 1970. The effects of stress ratio during crack propagation and fatigue for 2024-T3 and 7075-T6 Aluminium. In: Proceedings of the Effects of Environment and Complex Load History on Fatigue Life, ASTM STP 462. American Society for Testing and Materials (ASTM). p. 1–14.
   Google Scholar
• Wei Z, Dong P. 2011. A rapid path-length searching procedure for multi-axial fatigue cycle counting. Fatigue Fract Eng Mater Struct. 35:556–571. doi: 10.1111/j.1460-2695.2012.01649.x
   Web of Science ®Google Scholar
• Weng L, Zhang J, Kalnaus S, Feng M, Jiang Y. 2013. Corrosion fatigue crack growth of AISI 4340 steel. Int J Fatigue. 48:156–164. doi: 10.1016/j.ijfatigue.2012.10.015
   Web of Science ®Google Scholar
• Wormsen A, Sjödin B, Härkegård G, Fjeldstad A. 2007. Non-local stress approach for fatigue assessment based on weakest-link theory and statistics of extremes. Fatigue Fract Eng Mater Struct. 30:1214–1227. doi: 10.1111/j.1460-2695.2007.01190.x
   Web of Science ®Google Scholar
• Xiao ZG, Yamada K. 2004. A method of determining geometric stress for fatigue strength evaluation of steel welded joints. Int J Fatigue. 26:1277–1293. doi: 10.1016/j.ijfatigue.2004.05.001
   Web of Science ®Google Scholar
• Xing S, Dong P, Threstha A. 2016. Analysis of fatigue failure mode transition in load-carrying fillet-welded connections. Mar Struct. 46:102–126. doi: 10.1016/j.marstruc.2016.01.001
   Web of Science ®Google Scholar
• Xu T, Bea R. 1997. Load shedding of fatigue fracture in ship structures. Mar Struct. 10:49–80. doi: 10.1016/S0951-8339(97)80001-Q
   Google Scholar
• Zerbst U, Madia M. 2015. Fracture mechanics based assessment of the fatigue strength: approach for the determination of the initial crack size. Fatigue Fract Eng Mater Struct. 38:1066–1075. doi: 10.1111/ffe.12288
   Web of Science ®Google Scholar
• Zhang Y, Maddox SJ. 2009. Fatigue life prediction for toe ground welded joints. Int J Fatigue. 31:1124–1136. doi: 10.1016/j.ijfatigue.2009.01.003
   Web of Science ®Google Scholar