Dynamic impact analysis of AISI 316L coated with Al-5Mg in air and seawater

References

• Attia H. 2009. A generalized fretting wear theory. Tribol Int. 42(9):1380–1388. doi:10.1016/j.triboint.2009.04.010.
   Web of Science ®Google Scholar
• Bhatia A. 1999. Thermal spraying technology and applications credit: 4 PDH. [place unknown]. https://www.cedengineering.com/userfiles/ThermalSpraying-R1.pdf.
   Google Scholar
• Cai Zb, Guan Hd, Chen Zq, Qian H, Tang Lc, Zhou Zr, Zhu Mh. 2017. Impact fretting wear behavior of 304 stainless steel thin-walled tubes under low-velocity. Tribol Int. 105:219–228. doi:10.1016/j.triboint.2016.10.002.
   Web of Science ®Google Scholar
• Cassar G, Banfield S, Avelar-Batista Wilson JC, Housden J, Matthews A, Leyland A. 2012. Impact wear resistance of plasma diffusion treated and duplex treated/PVD-coated Ti-6Al-4V alloy. Surf Coatings Technol. 206(10):2645–2654. doi:10.1016/j.surfcoat.2011.10.054.
   Web of Science ®Google Scholar
• Daniel J, Žemlička R, Grossman J, Lümkemann A, Tapp P, Galamand C, Fořt T. 2020. Comparison of lifetime of the PVD coatings in laboratory dynamic impact test and industrial fine blanking process. Materials (Basel). 13(9). doi:10.3390/ma13092154
   Web of Science ®Google Scholar
• DeForce BS, Eden TJ, Potter JK. 2011. Cold spray Al-5% Mg coatings for the corrosion protection of magnesium alloys. J Therm Spray Technol [Internet]. 20(6):1352–1358. [accessed 2020 Dec 30] doi:10.1007/s11666-011-9675-4
   Web of Science ®Google Scholar
• Electric Arc spraying. 2021. Buhrer AG [Internet]. [accessed 2021 Feb 14]. https://www.buehrer-ag.ch/en/electric-arc-spraying/.
   Google Scholar
• Engel PA. 1978. Impact wear of materials [internet]. NY, U.S.A.: Elsevier. doi:10.1115/1.3424343
   Google Scholar
• Fischer KP, Thomason WH, Rosbrook T, Murali J. 1995. Performance history of thermal-sprayed aluminum coatings in offshore service. Mater Perform [Internet]. 34(4):27–35. http://citeseerx.ist.psu.edu/viewdoc/download?doi = 10.1.1.628.3086&rep = rep1&type = pdf.
   Web of Science ®Google Scholar
• Groover RE, Smith JA, Lennox TJ. 1972. Electrochemical potentials of high purity metals in Sea water. Corrosion [Internet]. 28(3):101–104. doi:10.5006/0010-9312-28.3.101.
   Web of Science ®Google Scholar
• Jahanmir S, Suh NP, Abrahamson EP. 1975. The delamination theory of wear and the wear of a composite surface. Wear. 32(1):33–49. doi:10.1016/0043-1648(75)90203-3.
   Web of Science ®Google Scholar
• Jiang XP, Wang XY, Li JX, Li DY, Man CS, Shepard MJ, Zhai T. 2006. Enhancement of fatigue and corrosion properties of pure Ti by sandblasting. Mater Sci Eng A. 429(1–2):30–35. doi:10.1016/j.msea.2006.04.024.
   Web of Science ®Google Scholar
• Jie JC, Zou CM, Wang HW, Li B, Wei ZJ. 2012. Mechanical properties of Al(Mg) solid solution prepared by solidification under high pressures. J Alloys Compd. 510(1):11–14. doi:10.1016/j.jallcom.2011.08.088.
   Web of Science ®Google Scholar
• Knotek O, Bosserhoff B, Schrey A, Leyendecker T, Lemmer O, Esser S. 1992. A new technique for testing the impact load of thin films: the coating impact test. Surf Coatings Technol. 54–55:102–107. doi:10.1016/S0257-8972(09)90035-4.
   Web of Science ®Google Scholar
• Kuptsov KA, Kiryukhantsev-Korneev PV, Sheveyko AN, Shtansky DV. 2013. Comparative study of electrochemical and impact wear behavior of TiCN, TiSiCN, TiCrSiCN, and TiAlSiCN coatings. Surf Coatings Technol. 216:273–281. doi:10.1016/j.surfcoat.2012.11.058.
   Web of Science ®Google Scholar
• Kuroda S. 2005. Characterization of thermal sprayed Zn and Al coatings after 18 years’ exposure in marine environment. Electrochem Soc [Internet]. https://iopscience.iop.org/article/10.1149MA2005-02/7/281/meta.
   Google Scholar
• Landolt D, Mischler S, Stemp M. 2001. Electrochemical methods in tribocorrosion: A critical appraisal. Electrochim Acta. 46(24−25):3913–3929.
   Web of Science ®Google Scholar
• LaQue F. 1975. Marine corrosion: causes and prevention [Internet]. US: U.S. Department of Energy Office of Scientific and Technical Information. https://www.osti.gov/biblio/7265678.
   Google Scholar
• Lathabai S, Lloyd PG. 2002. The effect of scandium on the microstructure, mechanical properties and weldability of a cast Al-Mg alloy. Acta Mater. 50(17):4275–4292. doi:10.1016/S1359-6454(02)00259-8.
   Web of Science ®Google Scholar
• Lewis R. 2007. A modelling technique for predicting compound impact wear. Wear. 262(11–12):1516–1521. doi:10.1016/j.wear.2007.01.032.
   Web of Science ®Google Scholar
• Moore JJ, Perez R, Gangopadhyay A, Eggert JF. 1988. Factors affecting wear in tumbling mills: influence of composition and microstructure. Int J Miner Process. 22(1–4):313–343. doi:10.1016/0301-7516(88)90071-3.
   Google Scholar
• Roychowdhury S, Ghosal De PK. 2004. Effects of pH and specimen orientation on the corrosion fatigue behaviour of a duplex stainless steel in chloride solutions. Trans Indian Inst Met [Internet]. 57(3):265–270. http://www.igcar.gov.in/transiim/2004/TP-1891.pdf.
   Web of Science ®Google Scholar
• Sedriks AJ. 1982. Corrosion resistance of austenitic Fe-Cr-Ni-Mo alloys in marine environments. Int Met Rev [Internet]. 27(1):321–353. [accessed 2020 Dec 30] doi:10.1179/imr.1982.27.1.321
   Google Scholar
• Simunovic K. 2010. Welding engineering and technology - thermal spraying. Encycl Life Support Syst [Internet]. https://www.eolss.net/Sample-Chapters/C05/E6-171-17-00.pdf
   Google Scholar
• Subramanian C, Strafford KN. 1993. Review of multicomponent and multilayer coatings for tribological applications. Wear. 165(1):85–95. doi:10.1016/0043-1648(93)90376-W.
   Web of Science ®Google Scholar
• Suh NP. 1977. An overview of the delamination theory of wear. Wear. 44(1):1–16. doi:10.1016/0043-1648(77)90081-3.
   Web of Science ®Google Scholar
• Tianmin S, Meng H, Yuen TH. 2003. Impact wear behavior of laser hardened hypoeutectoid 2Cr13 martensite stainless steel. Wear. 255(1–6):444–455.
   Google Scholar
• Voevodin AA, Schneider JM, Rebholz C, Matthews A. 1996. Multilayer composite ceramic-metal-DLC coatings for sliding wear applications. Tribol Int. 29(7):559–570. doi:10.1016/0301-679X(95)00121-J.
   Web of Science ®Google Scholar
• Wang C, Li X, Chang Y, Han S, Dong H. 2016. Comparison of three-body impact abrasive wear behaviors for quenching–partitioning–tempering and quenching–tempering 20Si2Ni3 steels. Wear [Internet]. 362–363: 121–128. [accessed 2020 Dec 30] doi:10.1016/j.wear.2016.05.026
   Web of Science ®Google Scholar
• Wang Z, Cai Z bing, Chen Z qiang, Sun Y, Zhu M hao. 2017. Low-Velocity impact wear behavior of ball-to-flat contact under constant kinetic energy. J Mater Eng Perform [Internet]. 26(11):5669–5679. [accessed 2020 Nov 19] doi:10.1007/s11665-017-2941-y
   Web of Science ®Google Scholar
• Wood RJK. 2006. Erosion-corrosion interactions and their effect on marine and offshore materials. Wear. 261(9):1012–1023.
   Web of Science ®Google Scholar
• Yano A, Hirayama Y, Sakanishi A, Shirai S, Uchida Y, Fujita K, Kikkawa F, Fujioka K, Kawazoe T, Saki K, Yamamoto Y. 2007. Corrosive wear of bronze propeller shaft sleeve. Part 1: investigation of the sleeve used and fundamental corrosive wear test. Tribol Trans. 50(1):1–12.
   Web of Science ®Google Scholar
• Yilmaz H, Sadeler R. 2019. Impact wear behavior of ball burnished 316L stainless steel. Surf Coatings Technol. 363:369–378. doi:10.1016/j.surfcoat.2019.02.022.
   Web of Science ®Google Scholar
• Zener C, Hollomon JH. 1944. Effect of strain rate upon plastic flow of steel. J Appl Phys [Internet]. 15(1):22–32. [accessed 2020 Dec 7] doi:10.1063/1.1707363
   Google Scholar
• Zhu MH, Zhou ZR. 2011. On the mechanisms of various fretting wear modes. Tribol Int. 44(11):1378–1388. doi:10.1016/j.triboint.2011.02.010.
   Web of Science ®Google Scholar