Experimental investigations for improving part strength in selective laser sintering

References

• Ajoku , U. , Hopkinson , N. and Caine , M. 2006 . Experimental measurement and finite element modelling of the compressive properties of laser sintered nylon-12 . Materials Science and Engineering A , 428 : 211 – 216 .
   Web of Science ®Google Scholar
• Askeland , D.R. 1988 . The science and engineering of materials , London : VNR publishers, UK .
   Google Scholar
• Bacchewar , P.B. , Singhal , S.K. and Pandey , P.M. 2007 . Statistical modelling and optimisation of surface roughness in selective laser sintering process . Journal of Engineering Manufacture B , 221 : 35 – 52 .
   Google Scholar
• Caulfield , B. , McHugh , P.E. and Lohfeld , S. 2007 . Dependence of mechanical properties of polyamide components on build parameters in the SLS process . Journal of Materials Processing Technology , 182 : 477 – 488 .
   Web of Science ®Google Scholar
• Chatterjee , A.N. , Kumar , S. , Saha , P. , Mishra , P.K. and Choudhary , A.R. 2003 . An experimental design approach to selective laser sintering of low carbon steel . Journal of Material Processing Technology , 136 : 151 – 157 .
   Web of Science ®Google Scholar
• Childs , T.H.C. , Berzins , M. , Ryder , G.R. and Tontowi , A. 1999 . Selective laser sintering of an amorphous polymer–simulations and experiments . Journal of Engineering Manufacture , 213 : 333 – 349 .
   Google Scholar
• Chockalingam , K. , Jawahar , N. and Chandrashekhar , U. 2006a . Influence of layer thickness on mechanical properties in stereolithography . Rapid Prototyping Journal , 12 ( 2 ) : 106 – 113 .
   Google Scholar
• Chockalingam , K. , Jawahar , N. , Ramanathan , K.N. and Banerjee , P.S. 2006b . Optimization of stereolithography process parameters for part strength using design of experiments . International Journal of Advanced Manufacturing Technology , 29 : 79 – 88 .
   Google Scholar
• Chua , C.K. , Leong , K.F. and Lim , C.S. 2003 . Rapid prototyping: Principles and applications , 2nd edn , Singapore : World Scientific .
   Google Scholar
• EOSINT P380 , 2003 . Basic Training Manual , EOS Gmbh, Munich, Germany.
   Google Scholar
• Gibson , I. and Shi , D. 1997 . Material properties and fabrication parameters in selective laser sintering process . Rapid Prototyping Journal , 3 ( 4 ) : 129 – 136 .
   Web of Science ®Google Scholar
• Jain , P.K. , Senthilkumaran , K. , Pandey , P.M. , and Rao , P.V.M. , 2006 . Advances in Materials for powder based rapid prototyping . Proceedings of International Conference on Recent Advances in Materials and Processing, at PSG College of Technology , Coimbatore, India, 15–16 December, section 14.6.
   Google Scholar
• Jain , P.K. , Pandey , P.M. and Rao , P.V.M. , 2007 . Experimental investigations into the effect of delay time on part strength in selective laser sintering . Proceedings of International Conference on Manufacturing Automation, National University of Singapore, Singapore, 28–30 May . pp. 501 – 516 .
   Google Scholar
• Kalpakjian , S. and Schmid , S.R. 2001 . Manufacturing engineering and technology , India : Pearson Education .
   Google Scholar
• Kruth , J.P. , Wang , X. , Laoui , T. and Froyen , L. 2003 . Lasers and materials in selective laser sintering . Assembly Automation , 23 ( 4 ) : 357 – 371 .
   Web of Science ®Google Scholar
• Majewski , C.E. , Hobbs , B.S. and Hopkinson , N. 2007 . Effect of bed temperature and infra-red lamp power on the mechanical properties of parts produced using high-speed sintering . Virtual and Physical Prototyping , 2 ( 2 ) : 103 – 110 .
   Google Scholar
• Nelson , J.C. , Xue , S. , Barlow , J.W. , Beaman , J.J. , Marcus , H. L. and Bourell , D.J. 1993 . Model of selective laser sintering of bisphenol- A polycarbonate . Industrial and Engineering Chemistry Research , 32 ( 10 ) : 2305 – 2317 .
   Web of Science ®Google Scholar
• Ning , Y. , Fuh , J.Y.H. , Wong , Y.S. and Loh , H.T. 2004 . An intelligent parameter selection system for the direct metal laser sintering process . International Journal of Production Research , 42 ( 1 ) : 183 – 199 .
   Web of Science ®Google Scholar
• Ning , Y. , Wong , Y.S. and Fuh , J.Y.H. 2005 . Effect and control of hatch length on material properties in the direct metal laser sintering process . Journal of Engineering Manufacture , 219 : 15 – 25 .
   Web of Science ®Google Scholar
• Pal , D. and Ravi , B. 2007 . Rapid tooling route selection and evaluation for sand and investment casting . Virtual and Physical Prototyping , 2 ( 4 ) : 197 – 207 .
   Google Scholar
• Pandey , P.M. , Reddy , N.V. and Dhande , S.G. 2003 . Slicing procedures in layered manufacturing: a review . Rapid Prototyping Journal , 9 ( 5 ) : 274 – 288 .
   Web of Science ®Google Scholar
• Pandey , P.M. , Reddy , N.V. and Dhande , S.G. 2006 . Virtual hybrid-FDM system to enhance surface finish . Virtual and Physical Prototyping , 1 ( 2 ) : 101 – 116 .
   Google Scholar
• Pham , D.T. and Dimov , S.S. 2001 . Rapid Manufacturing: The Technologies and Applications of Rapid Prototyping and Rapid Tooling , London : Springer-Verlag .
   Google Scholar
• Pham , D.T. , Dimov , S.S. and Lacan , F. 1999 . Selective laser sintering: Applications and technological capabilities . Journal of Engineering Manufacture , 213 : 435 – 449 .
   Google Scholar
• Raghunath , N. and Pandey , P.M. 2006 . Improving accuracy through shrinkage modelling by using Taguchi method in selective laser sintering . International Journal of Machine Tools and Manufacture , 47 : 985 – 995 .
   Google Scholar
• Ross , P.J. 2005 . Taguchi Techniques for Quality Engineering , New Delhi : Tata McGraw-Hill Publishing .
   Google Scholar
• Roy , R. , 1990 . A primer on the Taguchi method , Society of Manufacturing Engineers .
   Google Scholar
• Stevinson , B. , Bourell , D.L. and Beaman , J.J. 2006 . Dimensional stability during post-processing of selective laser sintered ceramic performs . Virtual and Physical Prototyping , 1 ( 4 ) : 209 – 216 .
   Google Scholar
• Thompson , D.C. and Crawford , R.H. 1997 . Computational quality measures for evaluation of part orientation in free form fabrication . Journal of Manufacturing Systems , 16 ( 4 ) : 273 – 289 .
   Web of Science ®Google Scholar
• Tontowi , A.E. and Childs , T.H.C. 2001 . Density prediction of crystalline polymer sintered parts at various powder bed temperatures . Rapid Prototyping Journal , 7 ( 3 ) : 180 – 184 .
   Google Scholar
• Venuvinod , P.K. and Ma , W. 2004 . Rapid Prototyping: Laser Based and Other Technologies , Dordrecht : Kluwer Academic Publishers .
   Google Scholar
• Williams , J.D. and Deckard , C.R. 1998 . Advances in modelling the effects of selected parameters on the SLS process . Rapid Prototyping Journal , 4 ( 2 ) : 90 – 100 .
   Web of Science ®Google Scholar
• Zarringhalam , H. , Hopkinson , N. , Kamperman , N.F. and De , J.J , 2006 . Effects of processing on microstructure and properties of SLS nylon 12 . Materials Science and Engineering: A , 435–436 , 172 – 180 .
   Google Scholar