References
- Ahn, D., et al., 2012. Quantification of surface roughness of parts processed by laminated object manufacturing. Journal of Materials Processing Technology, 212, 339–346.10.1016/j.jmatprotec.2011.08.013
- Auyson, K., Koomsap, P., and Martinus, W., 2011. Pick and place algorithm for online waste removal process in LOM. In: Proceedings of the 4th international product design and development, November 2011, Yogyakarta, Indonesia.
- Chiu, Y.Y., Liao, Y.S., and Hou, C.C., 2003. Automatic fabrication for bridged laminated object manufacturing (LOM) process. Journal of Materials Processing Technology, 140, 179–184.10.1016/S0924-0136(03)00710-6
- Cho, I., et al., 2000. Development of a new sheet deposition type rapid prototyping system. International Journal of Machine Tools and Manufacture, 40, 1813–1829.10.1016/S0890-6955(99)00086-3
- Feygin, M. and Pak, S.S., 1997. Apparatus for forming an integral object from laminations. US Patent No. 5, 637, 175.
- Gomes, C.M., et al., 2011. Laminated object manufacturing of LZSA glass-ceramics. Rapid Prototyping Journal, 17 (6), 424–428.10.1108/13552541111184152
- Gomes, C.M., et al., 2009. Colloidal processing of glass-ceramics for laminated object manufacturing. Journal of American Ceramic Society, 92 (6), 1186–1191.10.1111/j.1551-2916.2009.03035.x
- Klosterman, D.A., et al., 1997. Automated fabrication of monolithic and ceramic matrix composites via laminated object manufacturing (LOM). In: Proceedings of solid freeform fabrication symposium, August 1997. University of Texas at Austin, 537–549.
- Klosterman, D.A., et al., 1999. Development of a curved layer LOM process for monolithic ceramics and ceramic matrix composites. Rapid Prototyping Journal, 5 (2), 61–71.10.1108/13552549910267362
- Kuagoolkijgarn, P., Koomsap, P., and Chansri, N., 2010. A new algorithm for tracing nests of interconnected contours. The International Journal of Advanced Manufacturing Technology, 50, 717–727.10.1007/s00170-010-2540-7
- Kumar, S. and Kruth, J.P., 2010. Composites by rapid prototyping technology. Materials and Design, 31, 850–856.10.1016/j.matdes.2009.07.045
- Liao, Y.S., Chiu, L.C., and Chiu, Y.Y., 2003. A new approach of online waste removal process for laminated object manufacturing (LOM). Journal of Materials Processing Technology, 140, 136–140.10.1016/S0924-0136(03)00690-3
- Liao, Y.S. and Chiu, Y.Y., 2001. Adaptive crosshatching approach for the laminated object manufacturing (LOM) process. International Journal of Production Research, 39, 3479–3490.10.1080/00207540110060879
- Mueller, B. and Kochan, D., 1999. Laminated object manufacturing for rapid tooling and patternmaking in foundry industry. Computers in Industry, 39, 47–53.10.1016/S0166-3615(98)00127-4
- Nakthewan, K. and Koomsap, P., 2013. Direct contour generation for structured light system-based selective data acquisition. Virtual and Physical Prototyping, 8 (2), 135–163.10.1080/17452759.2013.806865
- Pang, K.W., et al., 2001. A CAD/CAM system for process planning and optimization in LOM. IIE Transaction, 33 (4), 345–355.
- Rianmora, S., Koomsap, P., and Van Hai, D.P., 2009. Selective data acquisition for direct integration of reverse engineering and rapid prototyping. Virtual and Physical Prototyping, 4 (4), 227–239.10.1080/17452750903381397
- Ryder, G., et al., 2002. Rapid design and manufacture tools in architecture. Automation in Construction, 11, 279–290.10.1016/S0926-5805(00)00111-4
- Schindler, K. and Roosen, A., 2009. Manufacture of 3D structures by cold low pressure lamination of ceramic green tapes. Journal of the European Ceramic Society, 29, 899–904.10.1016/j.jeurceramsoc.2008.07.041
- Sridharan, A.K. and Joshi, S., 2001. An octree-based algorithm for the optimization of extraneous material removal in laminated object manufacturing. Journal of Manufacturing Systems, 19 (6), 355–364.10.1016/S0278-6125(01)80007-8
- Stares, S.L., et al., 2013. Paper-derived hydroxyapatite. Ceramics International, 39, 7179–7183.10.1016/j.ceramint.2013.02.062
- Wang, W., Conley, J.G., and Stoll, H.W., 1999. Rapid tooling for sand casting using laminated object manufacturing process. Rapid Prototyping Journal, 5 (3), 134–140.10.1108/13552549910278964
- Xu, B., et al., 2013. Fabrication of 3D metal micro-mold based on femtosecond laser cutting and micro-electric resistance slip welding. International Journal of Advanced Manufacturing Technology, 66, 601–609.10.1007/s00170-012-4351-5
- Yi, S., et al., 2004. Study of the key technologies of LOM for functional metal parts. Journal of Materials Processing Technology, 150, 175–181.10.1016/j.jmatprotec.2004.01.035
- Zhang, Y., et al., 2001. Al2O3 ceramics preparation by LOM (Laminated object manufacturing). International Journal of Advanced Manufacturing Technology, 17, 531–534.10.1007/s001700170154
- Zhang, Y. and Liu, H., 2009. Application of rapid prototyping technology in die making of diesel engine. Tsinghua Science and Technology, 14, 127–131.10.1016/S1007-0214(09)70079-3