Guidelines for AM part consolidation

References

• Ahn, S.H., et al., 2002. Anisotropic material properties of fused deposition modelling ABS. Rapid Prototyping Journal, 8 (4), 248–257. doi: 10.1108/13552540210441166
   Web of Science ®Google Scholar
• Ahn, S.H., et al., 2003. Anisotropic tensile failure model of rapid prototyping parts – fused deposition modelling (FDM). International Journal of Modern Physics B, 17 (8–9), 1510–1516. doi: 10.1142/S0217979203019241
   Web of Science ®Google Scholar
• Allaire, G., Jouve, F., and Toader, A.M., 2004. Structural optimization using sensitivity analysis and a level-set method. Journal of Computational Physics, 194 (1), 363–393. doi: 10.1016/j.jcp.2003.09.032
   Web of Science ®Google Scholar
• Atzeni, E., et al., 2010. Redesign and cost estimation of rapid manufactured plastic parts. Rapid Prototyping Journal, 16 (5), 308–317. doi: 10.1108/13552541011065704
   Web of Science ®Google Scholar
• Becker, R., Grzesiak, A., and Henning, A., 2005. Rethink assembly design. Assembly Automation, 25 (4), 262–266. doi: 10.1108/01445150510626370
   Web of Science ®Google Scholar
• Chickermane, H. and Gea, H.C., 1997. Design of multi-component structural systems for optimal layout topology and joint locations. Engineering with Computers, 13 (4), 235–243. doi: 10.1007/BF01200050
   Web of Science ®Google Scholar
• Chickermane, H., et al., 1999. Optimal fastener pattern design considering bearing loads. Structural Optimization, 17 (2), 140–146. doi: 10.1007/s001580050045
   Web of Science ®Google Scholar
• Gao, H.H., et al., 2015. An improved adaptive constraint aggregation for integrated layout and topology optimization. Computer Methods in Applied Mechanics and Engineering, 289, 387–408. doi: 10.1016/j.cma.2015.02.022
   Web of Science ®Google Scholar
• Hill, N. and Haghi, M., 2014. Deposition direction-dependent failure criteria for fused deposition modelling polycarbonate. Rapid Prototyping Journal, 20 (3), 221–227. doi: 10.1108/RPJ-04-2013-0039
   Web of Science ®Google Scholar
• Huang, B. and Singamneni, S., 2014. Raster angle mechanics in fused deposition modelling. Journal of Composite Materials, 49 (3), 363–383. doi: 10.1177/0021998313519153
   Web of Science ®Google Scholar
• Jiang, T. and Chirehdast, M., 1997. A systems approach to structural topology optimization: designing optimal connections. Journal of Mechanical Design, 119 (1), 40–47. doi: 10.1115/1.2828787
   Web of Science ®Google Scholar
• Li, Q., Steven, G.P., and Xie, Y.M., 2001. Evolutionary structural optimization for connection topology design of multi-component systems. Engineering Computations, 18 (3/4), 460–479. doi: 10.1108/02644400110387127
   Web of Science ®Google Scholar
• Liu, J.K., et al., 2015. A novel CACD/CAD/CAE integrated design framework for fiber-reinforced plastic parts. Advances in Engineering Software, 87, 13–29. doi: 10.1016/j.advengsoft.2015.04.013
   Web of Science ®Google Scholar
• Meisel, B. and Williams, C., 2015. An investigation of key design for additive manufacturing constraints in multimaterial three-dimensional printing. Journal of Mechanical Design, 137 (11), 1–9, 111406. doi: 10.1115/1.4030991
   Web of Science ®Google Scholar
• Osher, J.A. and Fedkiw, R.P., 2003. Level set methods and dynamic implicit surfaces. New York: Springer-Verlag.
   Google Scholar
• Ponche, R., et al., 2012. A new global approach to design for additive manufacturing. Virtual and Physical Prototyping, 7 (2), 93–105. doi: 10.1080/17452759.2012.679499
   Google Scholar
• Ponche, R., et al., 2014. A novel methodology of design for additive manufacturing applied to additive laser manufacturing process. Robotics and Computer-Integrated Manufacturing, 30, 389–398. doi: 10.1016/j.rcim.2013.12.001
   Web of Science ®Google Scholar
• Qian, Z.Y. and Ananthasuresh, G.K., 2004. Optimal embedding of rigid objects in the topology design of structures. Mechanics Based Design of Structures and Machines, 32 (2), 165–193. doi: 10.1081/SME-120030555
   Web of Science ®Google Scholar
• Rosen, D.W., 2007. Computer-aided design for additive manufacturing of cellular structures. Computer-Aided Design and Applications, 4 (5), 585–594. doi: 10.1080/16864360.2007.10738493
   Google Scholar
• Ulu, E., et al., 2015. Enhancing the structural performance of additively manufactured objects through build orientation optimization. Journal of Mechanical Design, 137 (11), 1–9, 111410. doi: 10.1115/1.4030998
   Web of Science ®Google Scholar
• Umetani, N. and Schmidt, R., 2013. Cross-sectional structural analysis for 3D printing optimization. SIGGRAPH Asia 2013 technical briefs, article 5. New York: ACM.
   Google Scholar
• Wang, M.Y., Wang, X.M., and Guo, D.M., 2003. A level set method for structural topology optimization. Computer Methods in Applied Mechanics and Engineering, 192 (1–2), 227–246. doi: 10.1016/S0045-7825(02)00559-5
   Web of Science ®Google Scholar
• Yang, S., Tang, Y.L., and Zhao, Y.F., 2015. A new part consolidation method to embrace the design freeform of additive manufacturing. Journal of Manufacturing Process, 20 (3), 444–449. doi: 10.1016/j.jmapro.2015.06.024
   Web of Science ®Google Scholar
• Zhang, P. and To, A.C., 2016. Transversely isotropic hyperelastic-viscoplastic model for glassy polymers with applications to additive manufactured photopolymers. International Journal of Plasticity. doi:10.1016/j.ijplas.2015.12.012
   Google Scholar
• Zhou, Q.N., Panetta, J., and Zorin, D., 2013. Worst-case structural analysis. ACM Transactions on Graphics, 32 (4), 1–12, article 137.
   Google Scholar
• Zhu, J.H., et al., 2014. Structural topology optimization with constraints on multi-fastener joint loads. Structural and Multidisciplinary Optimization, 36 (1), 29–41. doi: 10.1007/s00158-007-0155-x
   Web of Science ®Google Scholar