Assessment of optical emission analysis for in-process monitoring of powder bed fusion additive manufacturing

References

• Ancona, A., et al., 2001. Optical sensor for real-time monitoring of CO2 laser welding process. Applied Optics, 40 (33), 6019–6025. doi: 10.1364/AO.40.006019
   PubMed Web of Science ®Google Scholar
• Bartkowiak, K., 2010. Direct laser deposition process within spectrographic analysis in situ. Physics Procedia, 5, 623–629. doi: 10.1016/j.phpro.2010.08.090
   Google Scholar
• Boas, F.E. and Fleischmann, D., 2012. CT artifacts: causes and reduction techniques. Imaging in Medicine, 4 (2), 229–240. doi: 10.2217/iim.12.13
   Google Scholar
• Dunbar, A.J., et al., 2016. A real-time communication architecture for metal powder bed fusion additive manufacturing. In: Proceedings of the 27th Annual Solid Freeform Fabrication Symposium, 8–10 August, Austin, TX, 67–80.
   Google Scholar
• Everton, S.K., et al., 2016. Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing. Materials and Design, 95, 431–445. doi: 10.1016/j.matdes.2016.01.099
   Web of Science ®Google Scholar
• Gu, D.D., et al., 2012. Laser additive manufacturing of metallic components: materials, processes and mechanisms. International Materials Reviews, 57 (3), 133–164. doi: 10.1179/1743280411Y.0000000014
   Web of Science ®Google Scholar
• King, W.E., et al., 2015. Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges. Applied Physics Review, 2 (4), 41304. doi: 10.1063/1.4937809
   Web of Science ®Google Scholar
• Nassar, A.R., 2012. Investigation of laser-sustained plasma and the role of plasma in carbon dioxide laser nitriding of titanium. University Park, PA: The Pennsylvania State University.
   Google Scholar
• Nassar, A.R., Spurgeon, T.J., and Reutzel, E.W., 2014. Sensing defects during directed-energy additive manufacturing of metal parts using optical emissions spectroscopy. In: Solid Freeform Fabrication Symposium Proceedings. Austin, TX: University of Texas, 278–287.
   Google Scholar
• Nassar, A.R., Starr, B., and Reutzel, E.W., 2015. Process monitoring of directed-energy deposition of Inconel-718 via plume imaging. In: Proceedings of the Solid Freeform Fabrication Symposium, Austin, TX, 284–294.
   Google Scholar
• Nassar, A.R., et al., 2016. Sensing for directed energy deposition and powder bed fusion additive manufacturing at Penn State University. In: Proceedings of the SPIE 9738, Laser 3D Manufacturing III, 97380R.
   Google Scholar
• Nassar, A.R., et al., 2017. Development and demonstration of an open, layered protocol for powder bed additive manufacturing. America Makes, Youngstown, 17–17.
   Google Scholar
• Pekkarinen, J., Salminen, A., and Kujanpää, V., 2014. Laser cladding with scanning optics: effect of scanning frequency and laser beam power density on cladding process. Journal of Laser Applications, 26 (3), 32002. doi: 10.2351/1.4868895
   Web of Science ®Google Scholar
• Reutzel, E.W. and Nassar, A.R., 2015. A survey of sensing and control systems for machine and process monitoring of directed-energy, metal-based additive manufacturing. Rapid Prototyping Journal, 21 (2), 159–167. doi: 10.1108/RPJ-12-2014-0177
   Web of Science ®Google Scholar
• Seltzer, D., et al., 2016. Illumination and image processing for real-time control of directed energy deposition additive manufacturing. In: Proceedings of the 26th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, Austin, TX, 1479–1486.
   Google Scholar
• Sforza, P. and de Blasiis, D., 2002. On-line optical monitoring system for arc welding. NDT & E International, 35 (1), 37–43. doi: 10.1016/S0963-8695(01)00021-4
   Web of Science ®Google Scholar
• Song, L. and Mazumder, J., 2012. Real time Cr measurement using optical emission spectroscopy during direct metal deposition process. IEEE Sensors Journal, 12 (5), 958–964. doi: 10.1109/JSEN.2011.2162316
   Web of Science ®Google Scholar
• Song, L., Wang, C., and Mazumder J., 2012. Identification of phase transformation using optical emission spectroscopy for direct metal deposition process. In: Proceedings of SPIE 8239, High Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications, 7 February, San Francisco, CA, 82390G.
   Google Scholar
• Steen, W.M. and Mazumder, J., 2010. Laser automation and in-process sensing. In: Laser material processing. London: Springer, 485–518.
   Google Scholar
• Tapia, G. and Elwany, A., 2014. A review on process monitoring and control in metal-based additive manufacturing. Journal of Manufacturing Science and Engineering, 136 (6), 060801-1–060801-10.
   Google Scholar
• Tewari, S.K., 1995. Plasma optical emission spectroscopy of laser cladding for process control and oxidation behavior of laser clad NbAl alloys. Urbana, IL: University of Illinois at Urbana-Champaign.
   Google Scholar
• Ya, W., et al., 2015. Spectroscopic monitoring of metallic bonding in laser metal deposition. Journal of Materials Processing Technology, 220, 276–284. doi: 10.1016/j.jmatprotec.2015.01.026
   Web of Science ®Google Scholar