Effect of support on printed properties in fused deposition modelling processes

References

• Ali, Haider, Hassan Ghadbeigi, and Kamran Mumtaz. 2018. “Processing Parameter Effects on Residual Stress and Mechanical Properties of Selective Laser Melted Ti6Al4 V.” Journal of Materials Engineering and Performance 27 (8). Springer US: 4059–4068. doi:10.1007/s11665-018-3477-5.
   PubMed Web of Science ®Google Scholar
• Chow, W. S., E. L. Teoh, and J. Karger-Kocsis. 2018. “Flame Retarded Poly(Lactic Acid): A Review.” Express Polymer Letters 12 (5): 396–417. doi:10.3144/expresspolymlett.2018.34.
   Web of Science ®Google Scholar
• Deng, Shiguang, and Krishnan Suresh. 2015. “Multi-Constrained Topology Optimization via the Topological Sensitivity.” Structural and Multidisciplinary Optimization 51(5): 987-1001. doi: 10.1007/s00158-014-1188-6
   Web of Science ®Google Scholar
• Deng, Shiguang, and Krishnan Suresh. 2016. “Multi-constrained 3D Topology Optimization via Augmented Topological Level-Set.” Computers & Structures 170: 1-12. doi: 10.1016/j.compstruc.2016.02.009
   Web of Science ®Google Scholar
• Deng, Shiguang, and Krishnan Suresh. 2017a. “Topology Optimization Under Thermo-Elastic Buckling.” Structural and Multidisciplinary Optimization 55(5): 1759-1772. doi: 10.1007/s00158-016-1611-2
   Web of Science ®Google Scholar
• Deng, Shiguang, and Krishnan Suresh. 2017b. “Stress Constrained Thermo-Elastic Topology Optimization with Varying Temperature Fields via Augmented Topological Sensitivity Based Level-Set.” Structural and Multidisciplinary Optimization 56: 1413.
   Google Scholar
• Dijkstra, E. W. 1959. “A Note on Two Problems in Connexion with Graphs.” Numerische Mathematik 1 (1): 269–271. doi:10.1007/BF01386390.
   Google Scholar
• Dizon, John Ryan C., Alejandro H. Espera, Qiyi Chen, and Rigoberto C. Advincula. 2018. “Mechanical Characterization of 3D-Printed Polymers.” Additive Manufacturing 20 (March). Elsevier: 44–67. doi:10.1016/J.ADDMA.2017.12.002.
   Google Scholar
• do Nascimento, Estêvão Mestres, Daniel Eiras, and Luiz Antonio Pessan. 2016. “Effect of Thermal Treatment on Impact Resistance and Mechanical Properties of Polypropylene/Calcium Carbonate Nanocomposites.” Composites Part B: Engineering 91 (April). Elsevier: 228–234. doi:10.1016/J.COMPOSITESB.2015.12.040.
   Google Scholar
• Hamad, K., M. Kaseem, H. W. Yang, F. Deri, and Y. G. Ko. 2015. “Properties and Medical Applications of Polylactic Acid: A Review.” Express Polymer Letters 9 (5): 435–455. doi:10.3144/expresspolymlett.2015.42.
   Web of Science ®Google Scholar
• Jiang, Yujing, Bo Li, and Yosihiko Tanabashi. 2006. “Estimating the Relation Between Surface Roughness and Mechanical Properties of Rock Joints.” International Journal of Rock Mechanics and Mining Sciences 43 (6). Pergamon: 837–846. doi:10.1016/J.IJRMMS.2005.11.013. doi: 10.1016/j.ijrmms.2005.11.013
   Web of Science ®Google Scholar
• Jiang, Jngchao, Jonathan Stringer, and Xun Xu. 2018. “Support Optimization for Flat Features via Path Planning in Additive Manufacturing.” 3D Printing and Additive Manufacturing. doi:10.1089/3dp.2017.0124.
   PubMedGoogle Scholar
• Jiang, Jingchao, Jonathan Stringer, Xun Xu, and Pai Zheng. 2018. “A Benchmarking Part for Evaluating and Comparing Support Structures of Additive Manufacturing.” In 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018), 196–202. doi:10.25341/D42G6H.
   Google Scholar
• Jiang, Jingchao, Jonathan Stringer, Xun Xu, and Ray Y. Zhong. 2018. “Investigation of Printable Threshold Overhang Angle in Extrusion-Based Additive Manufacturing for Reducing Support Waste.” International Journal of Computer Integrated Manufacturing 31 (10). Taylor & Francis: 961–969. doi:10.1080/0951192X.2018.1466398.
   Web of Science ®Google Scholar
• Jiang, Jingchao, Xun Xu, and Jonathan Stringer. 2018a. “A New Support Strategy for Reducing Waste in Additive Manufacturing.” In The 48th International Conference on Computers and Industrial Engineering (CIE 48), 1–7. Auckland.
   Google Scholar
• Jiang, Jingchao, Xun Xu, and Jonathan Stringer. 2018b. “Support Structures for Additive Manufacturing: A Review.” Journal of Manufacturing and Materials Processing 2018, Vol. 2, Page 64 2 (4). Multidisciplinary Digital Publishing Institute: 64. doi:10.3390/JMMP2040064.
   Google Scholar
• Jin, Yuan, Jianke Du, and Yong He. 2017. “Optimization of Process Planning for Reducing Material Consumption in Additive Manufacturing.” Journal of Manufacturing Systems 44 (July). Elsevier: 65–78. doi:10.1016/J.JMSY.2017.05.003.
   Google Scholar
• Jin, Yuan, Jianke Du, Yong He, and Guoqiang Fu. 2017. “Modeling and Process Planning for Curved Layer Fused Deposition.” International Journal of Advanced Manufacturing Technology 91 (1–4). The International Journal of Advanced Manufacturing Technology: 273–285. doi:10.1007/s00170-016-9743-5.
   Web of Science ®Google Scholar
• Jin, Yuan, Jianke Du, Zhiyong Ma, Anbang Liu, and Yong He. 2017. “An Optimization Approach for Path Planning of High-Quality and Uniform Additive Manufacturing.” International Journal of Advanced Manufacturing Technology 92 (1–4). The International Journal of Advanced Manufacturing Technology: 651–662. doi:10.1007/s00170-017-0207-3.
   Web of Science ®Google Scholar
• Jin, Yuan, Yong He, and Jianke Du. 2017. “A Novel Path Planning Methodology for Extrusion-Based Additive Manufacturing of Thin-Walled Parts.” International Journal of Computer Integrated Manufacturing 30 (12). Taylor & Francis: 1–15. doi:10.1080/0951192X.2017.1307526.
   Web of Science ®Google Scholar
• Jin, Yuan, Yong He, Guoqiang Fu, Aibing Zhang, and Jianke Du. 2017. “A Non-Retraction Path Planning Approach for Extrusion-Based Additive Manufacturing.” Robotics and Computer-Integrated Manufacturing 48 (December 2016). Elsevier Ltd: 132–144. doi:10.1016/j.rcim.2017.03.008.
   Google Scholar
• Johnson, Gabriel A, and Jesse J French. 2018. “Evaluation of Infill Effect on Mechanical Properties of Consumer 3D Printing Materials.” Advances in Technology Innovation 3 (4): 179–184.
   Google Scholar
• Kakac, Sadık. 2018. Heat Conduction. Fifth edition. Boca Raton: Taylor & Francis, CRC Press, [2018]: CRC Press. doi:10.1201/b22157.
   Google Scholar
• Lee, Jusung, and Kunwoo Lee. 2017. “Block-Based Inner Support Structure Generation Algorithm for 3D Printing Using Fused Deposition Modeling.” The International Journal of Advanced Manufacturing Technology 89 (5–8). Springer London: 2151–2163. doi:10.1007/s00170-016-9239-3.
   Web of Science ®Google Scholar
• Li, Kaikai, Linlin Liu, Jimei Wu, Meng Li, and Shenghui Yong. 2018. “Study on the Mechanical Performance Optimization of FDM Built Parts.” In, 563–569. Springer, Singapore. doi:10.1007/978-981-10-7629-9_69.
   Google Scholar
• Liu, Jikai, and Albert C. To. 2017. “Deposition Path Planning-Integrated Structural Topology Optimization for 3D Additive Manufacturing Subject to Self-Support Constraint.” Computer-Aided Design 91 (October). Elsevier: 27–45. doi:10.1016/J.CAD.2017.05.003.
   Google Scholar
• Lyons, Brett. 2014. Additive Manufacturing in Aerospace: Examples and Research Outlook. The Bridge. Vol. 44. National Academy of Engineering. https://trid.trb.org/view.aspx?id=1328197.
   Google Scholar
• Nascimento, E. M., D. Eiras, L. A. Pessan. 2016. “Effect of Thermal Treatment on Impact Resistance and Mechanical Properties of Polypropylene/Calcium Carbonate Nanocomposites.” Composites Part B: Engineering 91: 228–234. doi:10.1016/j.compositesb.2015.12.040.
   Google Scholar
• Popescu, Diana, Aurelian Zapciu, Catalin Amza, Florin Baciu, and Rodica Marinescu. 2018. “FDM Process Parameters Influence over the Mechanical Properties of Polymer Specimens: A Review.” Polymer Testing 69 (August). Elsevier: 157–166. doi:10.1016/J.POLYMERTESTING.2018.05.020.
   Google Scholar
• Quan, Zhenzhen, Jonghwan Suhr, Jianyong Yu, Xiaohong Qin, Chase Cotton, Mark Mirotznik, and Tsu-Wei Chou. 2018. “Printing Direction Dependence of Mechanical Behavior of Additively Manufactured 3D Preforms and Composites.” Composite Structures 184 (January). Elsevier: 917–923. doi:10.1016/J.COMPSTRUCT.2017.10.055.
   Google Scholar
• Staiano, Gabriele, Antonio Gloria, Giovanni Ausanio, Antonio Lanzotti, Claudio Pensa, and Massimo Martorelli. 2018. “Experimental Study on Hydrodynamic Performances of Naval Propellers to Adopt New Additive Manufacturing Processes.” International Journal on Interactive Design and Manufacturing 12 (1). doi:10.1007/s12008-016-0344-1.
   Google Scholar
• Strano, G., L. Hao, R. M. Everson, and K. E. Evans. 2013. “A New Approach to the Design and Optimisation of Support Structures in Additive Manufacturing.” International Journal of Advanced Manufacturing Technology 66 (9–12): 1247–1254. doi:10.1007/s00170-012-4403-x.
   Web of Science ®Google Scholar
• Suntornnond R, An J., and Chua C. K, 2017. “Roles of support materials in 3D bioprinting – present and future.” International Journal of Bioprinting, 3(1): 83–86. doi:10.18063/IJB.2017.01.006.
   Web of Science ®Google Scholar
• Surftest SJ-210- Series 178-Portable Surface Roughness Tester. 2018. Accessed July 27. https://ecatalog.mitutoyo.com/Surftest-SJ-210-Series-178-Portable-Surface-Roughness-Tester-C1794.aspx.
   Google Scholar
• Vaidya, Rohan, and Sam Anand. 2016. “Optimum Support Structure Generation for Additive Manufacturing Using Unit Cell Structures and Support Removal Constraint.” Procedia Manufacturing 5: 1043–1059. doi:10.1016/j.promfg.2016.08.072.
   Google Scholar
• Wang, Yuanbin, Robert Blache, Pai Zheng, and Xun Xu. 2018. “A Knowledge Management System to Support Design for Additive Manufacturing Using Bayesian Networks.” Journal of Mechanical Design 140 (May). doi:10.1115/1.4039201.
   PubMedGoogle Scholar
• Wang, Lu, J. Elliott Sanders, Douglas J. Gardner, and Yousoo Han. 2018. “Effect of Fused Deposition Modeling Process Parameters on the Mechanical Properties of a Filled Polypropylene.” Progress in Additive Manufacturing, May. Springer International Publishing, 1–10. doi:10.1007/s40964-018-0053-3.
   Google Scholar
• Weng, Yiwei, Mingyang Li, Zhixin Liu, Wenxin Lao, Bing Lu, Dong Zhang, and Ming Jen Tan. 2018. “Printability and Fire Performance of a Developed 3D Printable Fibre Reinforced Cementitious Composites under Elevated Temperatures.” Virtual and Physical Prototyping, December. Taylor & Francis, 1–9. doi:10.1080/17452759.2018.1555046.
   Google Scholar
• Weng, Yiwei, Mingyang Li, Ming Jen Tan, and Shunzhi Qian. 2018. “Design 3D Printing Cementitious Materials via Fuller Thompson Theory and Marson-Percy Model.” Construction and Building Materials 163: 600–610. doi:10.1016/j.conbuildmat.2017.12.112.
   Web of Science ®Google Scholar
• Yuan, Kangbo, Weiguo Guo, Penghui Li, Jianjun Wang, Yu Su, Xin Lin, and Yanping Li. 2018. “Influence of Process Parameters and Heat Treatments on the Microstructures and Dynamic Mechanical Behaviors of Inconel 718 Superalloy Manufactured by Laser Metal Deposition.” Materials Science and Engineering: A 721 (April). Elsevier: 215–225. doi:10.1016/J.MSEA.2018.02.014.
   Google Scholar
• Zhang, Dongyun, Wen Niu, Xuanyang Cao, and Zhen Liu. 2015. “Effect of Standard Heat Treatment on the Microstructure and Mechanical Properties of Selective Laser Melting Manufactured Inconel 718 Superalloy.” Materials Science and Engineering: A 644 (September). Elsevier: 32–40. doi:10.1016/J.MSEA.2015.06.021.
   Google Scholar
• Zheng, Pai, Yuanbin Wang, Xun Xu, and Sheng Quan Xie. 2017. “A Weighted Rough Set Based Fuzzy Axiomatic Design Approach for the Selection of AM Processes.” The International Journal of Advanced Manufacturing Technology 91 (5–8). Springer London: 1977–1990. doi:10.1007/s00170-016-9890-8.
   Web of Science ®Google Scholar