Optimisation of multi-part production in additive manufacturing for reducing support waste

References

• Calignano, F. 2014. “Design Optimization of Supports for Overhanging Structures in Aluminum and Titanium Alloys by Selective Laser Melting.” Materials and Design 64: 203–213. doi:10.1016/j.matdes.2014.07.043.
   Web of Science ®Google Scholar
• Canellidis, V., J. Giannatsis, and V. Dedoussis. 2009. “Genetic-Algorithm-Based Multi-Objective Optimization of the Build Orientation in Stereolithography.” The International Journal of Advanced Manufacturing Technology 45 (7–8). Springer-Verlag: 714–730. doi:10.1007/s00170-009-2006-y.
   Web of Science ®Google Scholar
• Dai, Chengkai, Charlie C. L. Wang, Chenming Wu, Sylvain Lefebvre, Guoxin Fang, and Yong-Jin Liu. 2018. “Support-Free Volume Printing by Multi-Axis Motion.” ACM Transactions on Graphics 37 (4): 134. doi:10.1145/3197517.3201342.
   Web of Science ®Google Scholar
• Das, Paramita, Ramya Chandran, Rutuja Samant, and Sam Anand. 2015. “Optimum Part Build Orientation in Additive Manufacturing for Minimizing Part Errors and Support Structures.” Procedia Manufacturing 1: 343–354. doi:10.1016/j.promfg.2015.09.041.
   Google Scholar
• Flynn, Joseph M., Alborz Shokrani, Stephen T. Newman, and Vimal Dhokia. 2016. “Hybrid Additive and Subtractive Machine Tools – Research and Industrial Developments.” International Journal of Machine Tools and Manufacture 101: 79–101. doi:10.1016/j.ijmachtools.2015.11.007.
   Web of Science ®Google Scholar
• Griffiths, Valeriya, James P. Scanlan, Murat H. Eres, Antonio Martinez-Sykora, and Phani Chinchapatnam. 2019. “Cost-Driven Build Orientation and Bin Packing of Parts in Selective Laser Melting (SLM).” European Journal of Operational Research 273 (1). North-Holland: 334–352. doi:10.1016/J.EJOR.2018.07.053.
   Web of Science ®Google Scholar
• Hongyao, Shen, Ye Xiaoxiang, and Fu Jianzhong. 2018. “Research on the Flexible Support Platform for Fused Deposition Modeling.” The International Journal of Advanced Manufacturing Technology 97 (9–12). Springer London: 3205–3221. doi:10.1007/s00170-018-2046-2.
   Web of Science ®Google Scholar
• Järvinen, Jukka-Pekka, Ville Matilainen, Xiaoyun Li, Heidi Piili, Antti Salminen, Ismo Mäkelä, and Olli Nyrhilä. 2014. “Characterization of Effect of Support Structures in Laser Additive Manufacturing of Stainless Steel.” Physics Procedia 56 (January). Elsevier: 72–81. doi:10.1016/J.PHPRO.2014.08.099.
   Google Scholar
• Jiang, Jingchao, Jingjun Lou, and Guobiao Hu. 2019. “Effect of Support on Printed Properties in Fused Deposition Modelling Processes.” Virtual and Physical Prototyping, doi:10.1080/17452759.2019.1568835.
   Web of Science ®Google Scholar
• Jiang, Jngchao, Jonathan Stringer, and Xun Xu. 2018. “Support Optimization for Flat Features via Path Planning in Additive Manufacturing.” 3D Printing and Additive Manufacturing, doi:10.1089/3dp.2017.0124.
   PubMedGoogle Scholar
• Jiang, Jingchao, Jonathan Stringer, Xun Xu, and Pai Zheng. 2018. “A Benchmarking Part for Evaluating and Comparing Support Structures of Additive Manufacturing.” In 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018), 196–202. doi:10.25341/D42G6H.
   Google Scholar
• Jiang, Jingchao, Jonathan Stringer, Xun Xu, and Ray Y. Zhong. 2018. “Investigation of Printable Threshold Overhang Angle in Extrusion-Based Additive Manufacturing for Reducing Support Waste.” International Journal of Computer Integrated Manufacturing 31 (10). Taylor & Francis: 961–969. doi:10.1080/0951192X.2018.1466398.
   Web of Science ®Google Scholar
• Jiang, Jingchao, Xun Xu, and Jonathan Stringer. 2018a. “A New Support Strategy for Reducing Waste in Additive Manufacturing.” In The 48th International Conference on Computers and Industrial Engineering (CIE 48), Auckland, 1–7.
   Google Scholar
• Jiang, Jingchao, Xun Xu, and Jonathan Stringer. 2018b. “Support Structures for Additive Manufacturing: A Review.” Journal of Manufacturing and Materials Processing 2. Multidisciplinary Digital Publishing Institute: 64. doi:10.3390/JMMP2040064.
   Google Scholar
• Jin, Yuan, Jianke Du, and Yong He. 2017. “Optimization of Process Planning for Reducing Material Consumption in Additive Manufacturing.” Journal of Manufacturing Systems 44 (July). Elsevier: 65–78. doi:10.1016/J.JMSY.2017.05.003.
   Google Scholar
• Jin, Yuan, Yong He, and Jianke Du. 2017. “A Novel Path Planning Methodology for Extrusion-Based Additive Manufacturing of Thin-Walled Parts.” International Journal of Computer Integrated Manufacturing 30 (12). Taylor & Francis: 1–15. doi:10.1080/0951192X.2017.1307526.
   Web of Science ®Google Scholar
• Jin, Yuan, Yong He, Guoqiang Fu, Aibing Zhang, and Jianke Du. 2017. “A Non-Retraction Path Planning Approach for Extrusion-Based Additive Manufacturing.” Robotics and Computer-Integrated Manufacturing 48 (December 2016). Elsevier Ltd: 132–144. doi:10.1016/j.rcim.2017.03.008.
   Google Scholar
• Liu, Jikai, Andrew T. Gaynor, Shikui Chen, Zhan Kang, Krishnan Suresh, Akihiro Takezawa, Lei Li, et al. 2018. “Current and Future Trends in Topology Optimization for Additive Manufacturing.” Structural and Multidisciplinary Optimization 57 (6). Springer Berlin Heidelberg: 2457–2483. doi:10.1007/s00158-018-1994-3.
   Web of Science ®Google Scholar
• Liu, Jikai, and Albert C. To. 2017. “Deposition Path Planning-Integrated Structural Topology Optimization for 3D Additive Manufacturing Subject to Self-Support Constraint.” Computer-Aided Design 91 (October). Elsevier: 27–45. doi:10.1016/J.CAD.2017.05.003.
   Google Scholar
• Lu, L., A. Sharf, H. S. Zhao, Y. Wei, Q. N. Fan, X. L. Chen, Y. Savoye, C. H. Tu, D. Cohen-Or, and B. Q. Chen. 2014. “Build-to-Last: Strength to Weight 3D Printed Objects.” Acm Transactions on Graphics 33 (4): 1–10. doi:Artn 97\r10.1145/2601097.2601168.
   Web of Science ®Google Scholar
• Luo, Z., F. Yang, G. Dong, Y. Tang, and Y. F. Zhao. 2016. “Orientation Optimization in Layer-Based Additive Manufacturing Process.” Proceedings of the ASME Design Engineering Technical Conference 1A–2016: 1–10. doi:10.1115/DETC2016-59969.
   Google Scholar
• Nie, Jing, Qing Gao, Jing-jiang Qiu, Miao Sun, An Liu, Lei Shao, Jian-zhong Fu, Peng Zhao, and Yong He. 2018. “3D Printed Lego® -like Modular Microfluidic Devices Based on Capillary Driving.” Biofabrication 10 (3). IOP Publishing: 035001. doi:10.1088/1758-5090/aaadd3.
   PubMed Web of Science ®Google Scholar
• Paul, Ratnadeep, and Sam Anand. 2015. “Optimization of Layered Manufacturing Process for Reducing Form Errors with Minimal Support Structures.” Journal of Manufacturing Systems 36: 231–243. doi:10.1016/j.jmsy.2014.06.014.
   Web of Science ®Google Scholar
• Pereira, S., A. I. F. Vaz, and L. N. Vicente. 2018. “On the Optimal Object Orientation in Additive Manufacturing.” The International Journal of Advanced Manufacturing Technology 98 (5–8). Springer London: 1685–1694. doi:10.1007/s00170-018-2218-0.
   Web of Science ®Google Scholar
• Porter, J. H., T. M. Cain, S. L. Fox, and P. S. Harvey. 2019. “Influence of Infill Properties on Flexural Rigidity of 3D-Printed Structural Members.” Virtual and Physical Prototyping 14 (2): 148–159. doi:10.1080/17452759.2018.1537064.
   Web of Science ®Google Scholar
• Rathee, Sandeep, Manu Srivastava, Sachin Maheshwari, T. K. Kundra, and Arshad Noor Siddiquee. 2018. Friction Based Additive Manufacturing Technologies. Boca Raton, FL: CRC Press/Taylor & Francis Group, 2018: CRC Press. doi:10.1201/9781351190879.
   Google Scholar
• Schmidt, Ryan, and Nobuyuki Umetani. 2014. “Branching Support Structures for 3D Printing.” ACM SIGGRAPH 2014 Conference Proceedings, August 10–14 1. doi:10.1145/2619195.2656293.
   Google Scholar
• Schwerdt, Jörg, Michiel Smid, Ravi Janardan, and Eric Johnson. 2003. “Protecting Critical Facets in Layered Manufacturing: Implementation and Experimental Results.” Computer-Aided Design 35 (7). Elsevier: 647–657. doi:10.1016/S0010-4485(02)00090-8.
   Web of Science ®Google Scholar
• Srivastava, Manu, Sachin Maheshwari, T. K. Kundra, and Sandeep Rathee. 2017. “Multi-Response Optimization of Fused Deposition Modelling Process Parameters of ABS Using Response Surface Methodology (RSM)- Based Desirability Analysis.” Materials Today: Proceedings 4 (2): 1972–1977.
   Google Scholar
• Srivastava, Manu, Sachin Maheshwari, T. K. Kundra, Sandeep Rathee, Ramkrishna Yashaswi, and Satish Kumar Sharma. 2016. “Virtual Design, Modelling and Analysis of Functionally Graded Materials by Fused Deposition Modeling.” Materials Today: Proceedings 3 (10): 3660–3665. doi:10.1016/j.matpr.2016.11.010.
   Google Scholar
• Srivastava, Manu, and Sandeep Rathee. 2018. “Optimisation of FDM Process Parameters by Taguchi Method for Imparting Customised Properties to Components.” Virtual and Physical Prototyping 13 (3). Taylor & Francis: 203–210. doi:10.1080/17452759.2018.1440722.
   Web of Science ®Google Scholar
• Srivastava, Manu, Sandeep Rathee, Sachin Maheshwari, and T. K. Kundra. 2018a. “Multi-Objective Optimisation of Fused Deposition Modelling Process Parameters Using RSM and Fuzzy Logic for Build Time and Support Material.” International Journal of Rapid Manufacturing 7 (1): 25. doi:10.1504/IJRAPIDM.2018.089727.
   Google Scholar
• Srivastava, Manu, Sandeep Rathee, Sachin Maheshwari, Arshad Noor Siddiquee, and T. K. Kundra. 2018. “A Review on Recent Progress in Solid State Friction Based Metal Additive Manufacturing: Friction Stir Additive Techniques.” Critical Reviews in Solid State and Materials Sciences December. Taylor & Francis, 1–33. doi:10.1080/10408436.2018.1490250.
   Google Scholar
• Strano, G., L. Hao, R. M. Everson, and K. E. Evans. 2013. “A New Approach to the Design and Optimisation of Support Structures in Additive Manufacturing.” The International Journal of Advanced Manufacturing Technology 66 (9–12): 1247–1254. doi:10.1007/s00170-012-4403-x.
   Web of Science ®Google Scholar
• “Surftest SJ-210- Series 178-Portable Surface Roughness Tester.”. 2018. Accessed July 27. https://ecatalog.mitutoyo.com/Surftest-SJ-210-Series-178-Portable-Surface-Roughness-Tester-C1794.aspx.
   Google Scholar
• Thrimurthulu, K., Pulak M. Pandey, N. Venkata Reddy, and N. Venkata Reddy. 2004. “Optimum Part Deposition Orientation in Fused Deposition Modeling.” International Journal of Machine Tools and Manufacture, doi:10.1016/j.ijmachtools.2003.12.004.
   Web of Science ®Google Scholar
• Vaidya, Rohan, and Sam Anand. 2016. “Optimum Support Structure Generation for Additive Manufacturing Using Unit Cell Structures and Support Removal Constraint.” Procedia Manufacturing 5: 1043–1059. doi:10.1016/j.promfg.2016.08.072.
   Google Scholar
• Vanek, J., J. A. G. Galicia, and B. Benes. 2014. “Clever Support: Efficient Support Structure Generation for Digital Fabrication.” Computer Graphics Forum 33 (5): 117–125. doi:10.1111/cgf.12437.
   Web of Science ®Google Scholar
• Wang, Yuanbin, Robert Blache, Pai Zheng, and Xun Xu. 2018. “A Knowledge Management System to Support Design for Additive Manufacturing Using Bayesian Networks.” Journal of Mechanical Design 140 (May), doi:10.1115/1.4039201.
   PubMedGoogle Scholar
• Wang, Chengcheng, Xipeng Tan, Erjia Liu, and Shu Beng Tor. 2018. “Process Parameter Optimization and Mechanical Properties for Additively Manufactured Stainless Steel 316L Parts by Selective Electron Beam Melting.” Materials & Design 147 (June). Elsevier: 157–166. doi:10.1016/J.MATDES.2018.03.035.
   Google Scholar
• Wei, X. R., G. H. Geng, and Y. H. Zhang. 2016. “Steady and Low Consuming Supporting for Fused Deposition Modeling.” Zidonghua Xuebao/Acta Automatica Sinica 42 (1): 98–106. doi:10.16383/j.aas.2016.c150231.
   Google Scholar
• Weng, Yiwei, Mingyang Li, Zhixin Liu, Wenxin Lao, Bing Lu, Dong Zhang, and Ming Jen Tan. 2018. “Printability and Fire Performance of a Developed 3D Printable Fibre Reinforced Cementitious Composites Under Elevated Temperatures.” Virtual and Physical Prototyping December. Taylor & Francis: 1–9. doi:10.1080/17452759.2018.1555046.
   Google Scholar
• Yang, Yong, Jerry Y.H. Fuh, Han Tong Loh, and Yoke San Wong. 2003. “Multi-Orientational Deposition to Minimize Support in the Layered Manufacturing Process.” Journal of Manufacturing Systems, doi:10.1016/S0278-6125(03)90009-4.
   Web of Science ®Google Scholar
• Zhang, Yicha, Alain Bernard, Ramy Harik, and K. P. Karunakaran. 2017. “Build Orientation Optimization for Multi-Part Production in Additive Manufacturing.” Journal of Intelligent Manufacturing 28 (6): 1393–1407. doi:10.1007/s10845-015-1057-1.
   Web of Science ®Google Scholar
• Zhang, Pu, Jikai Liu, and Albert C. To. 2017. “Role of Anisotropic Properties on Topology Optimization of Additive Manufactured Load Bearing Structures.” Scripta Materialia 135: 148–152. doi:10.1016/j.scriptamat.2016.10.021.
   Web of Science ®Google Scholar
• Zhao, Jibin. 2005. “Determination of Optimal Build Orientation Based on Satisfactory Degree Theory for RPT.” In Proceedings – Ninth International Conference on Computer Aided Design and Computer Graphics, CAD/CG 2005, 225–230. doi:10.1109/CAD-CG.2005.32.
   Google Scholar
• Zhao, Haiming, Yishan Chen, Lei Shao, Mingjun Xie, Jing Nie, Jingjiang Qiu, Peng Zhao, et al. 2018. “Airflow-Assisted 3D Bioprinting of Human Heterogeneous Microspheroidal Organoids with Microfluidic Nozzle.” Small 14 (39). John Wiley & Sons, Ltd: 1802630. doi:10.1002/smll.201802630.
   Web of Science ®Google Scholar
• Zhao, Hai ming, Yong He, Jian zhong Fu, and Jing jiang Qiu. 2018. “Inclined Layer Printing for Fused Deposition Modeling without Assisted Supporting Structure.” Robotics and Computer-Integrated Manufacturing 51: 1–13. doi: 10.1016/j.rcim.2017.11.011
   Web of Science ®Google Scholar
• Zheng, Pai, Yuanbin Wang, Xun Xu, and Sheng Quan Xie. 2017. “A Weighted Rough Set Based Fuzzy Axiomatic Design Approach for the Selection of AM Processes.” The International Journal of Advanced Manufacturing Technology 91 (5–8). Springer London: 1977–1990. doi:10.1007/s00170-016-9890-8.
   Web of Science ®Google Scholar