References
- Abueidda, D. W., R. K. Abu Al-Rub, A. S. Dalaq, D.-W. Lee, K. A. Khan, and I. Jasiuk. 2016. “Effective Conductivities and Elastic Moduli of Novel Foams with Triply Periodic Minimal Surfaces.” Mechanics of Materials 95: 102–115. doi:10.1016/j.mechmat.2016.01.004.
- Abueidda, D. W., M. Bakir, R. K. Abu Al-Rub, J. S. Bergström, N. A. Sobh, and I. Jasiuk. 2017. “Mechanical Properties of 3D Printed Polymeric Cellular Materials with Triply Periodic Minimal Surface Architectures.” Materials & Design 122: 255–267. doi:10.1016/j.matdes.2017.03.018.
- Afshar, M., A. P. Anaraki, H. Montazerian, and J. Kadkhodapour. 2016. “Additive Manufacturing and Mechanical Characterization of Graded Porosity Scaffolds Designed Based on Triply Periodic Minimal Surface Architectures.” Journal of the Mechanical Behavior of Biomedical Materials 62: 481–494. doi:10.1016/j.jmbbm.2016.05.027.
- Ahn, Sung-Hoon, Michael Montero, Dan Odell, Shad Roundy, and Paul K. Wright. 2002. “Anisotropic Material Properties of Fused Deposition Modeling ABS.” Rapid Prototyping Journal 8: 248–257. doi:10.1108/13552540210441166.
- Almeida, H. A., and P. J. Bártolo. 2014. “Design of Tissue Engineering Scaffolds based on Hyperbolic Surfaces: Structural Numerical Evaluation.” Medical Engineering & Physics 36: 1033–1040. doi:10.1016/j.medengphy.2014.05.006.
- Ashby, M. F. 2006. “The Properties of Foams and Lattices.” Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 364: 15–30. doi:10.1098/rsta.2005.1678.
- Barnett, E., and C. Gosselin. 2015. “Weak Support Material Techniques for Alternative Additive Manufacturing Materials.” Additive Manufacturing 8: 95–104. doi:10.1016/j.addma.2015.06.002.
- Bellehumeur, C., L. Li, Q. Sun, and P. Gu. 2004. “Modeling of Bond Formation between Polymer Filaments in the Fused Deposition Modeling Process.” Journal of Manufacturing Processes 6: 170–178. doi:10.1016/S1526-6125(04)70071-7.
- Bose, S., S. Vahabzadeh, and A. Bandyopadhyay. 2013. “Bone Tissue Engineering Using 3D Printing.” Materials Today 16: 496–504. doi:10.1016/j.mattod.2013.11.017.
- Brunello, G., S. Sivolella, R. Meneghello, L. Ferroni, C. Gardin, A. Piattelli, B. Zavan, and E. Bressan. 2016. “Powder-based 3D Printing for Bone Tissue Engineering.” Biotechnology Advances 34: 740–753. doi:10.1016/j.biotechadv.2016.03.009.
- Casavola, C., A. Cazzato, V. Moramarco, and C. Pappalettere. 2016. “Orthotropic Mechanical Properties of Fused Deposition Modelling Parts Described by Classical Laminate Theory.” Materials & Design 90: 453–458. doi:10.1016/j.matdes.2015.11.009.
- Gibson, L. J., and M. F. Ashby. 1999. Cellular Solids: Structure and Properties. Cambridge: Cambridge University Press.
- Jin, Y., Y. He, and J. Fu. 2015. “Support Generation for Additive Manufacturing Based on Sliced Data.” The International Journal of Advanced Manufacturing Technology 80: 2041–2052. doi:10.1007/s00170-015-7190-3.
- Kadkhodapour, J., H. Montazerian, and S. Raeisi. 2014. “Investigating Internal Architecture Effect in Plastic Deformation and Failure for TPMS-based Scaffolds Using Simulation Methods and Experimental Procedure.” Materials Science and Engineering: C 43: 587–597. doi:10.1016/j.msec.2014.07.047.
- Kapfer, S. C., S. T. Hyde, K. Mecke, C. H. Arns, and G. E. Schröder-Turk. 2011. “Minimal Surface Scaffold Designs for Tissue Engineering.” Biomaterials 32: 6875–6882. doi:10.1016/j.biomaterials.2011.06.012.
- Kotlinski, Jaroslaw. 2014. “Mechanical Properties of Commercial Rapid Prototyping Materials.” Rapid Prototyping Journal 20: 499–510. doi:10.1108/RPJ-06-2012-0052.
- Lee, C. S., S. G. Kim, H. J. Kim, and S. H. Ahn. 2007. “Measurement of Anisotropic Compressive Strength of Rapid Prototyping Parts.” Journal of Materials Processing Technology 187–188: 627–630. doi:10.1016/j.jmatprotec.2006.11.095.
- Liu, F., D. Z. Zhang, P. Zhang, M. Zhao, and S. Jafar. 2018. “Mechanical properties of Optimized Diamond Lattice Structure for Bone Scaffolds Fabricated via Selective Laser Melting.” Materials (Basel). 11. doi:10.3390/ma11030374 doi: 10.1007/978-981-10-4804-3
- Maskery, I., N. T. Aboulkhair, A. O. Aremu, C. J. Tuck, and I. A. Ashcroft. 2017. “Compressive Failure Modes and Energy Absorption in Additively Manufactured Double Gyroid Lattices.” Additive Manufacturing 16: 24–29. doi:10.1016/j.addma.2017.04.003.
- Maskery, I., L. Sturm, A. O. Aremu, A. Panesar, C. B. Williams, C. J. Tuck, R. D. Wildman, I. A. Ashcroft, and R. J. M. Hague. 2018. “Insights into the Mechanical Properties of Several Triply Periodic Minimal Surface Lattice Structures Made by Polymer Additive Manufacturing.” Polymer 152: 62–71. doi:10.1016/j.polymer.2017.11.049.
- Masood, S. H. 2014. “10.04 - Advances in Fused Deposition Modeling A2 - Hashmi, Saleem.” In Comprehensive Materials Processing, edited by G. F. Batalha, C. J. V. Tyne, and B. Yilbas, 69–91. Oxford: Elsevier. Accessed July 18, 2016. http://www.sciencedirect.com/science/article/pii/B9780080965321010025.
- McKown, S., Y. Shen, W. K. Brookes, C. J. Sutcliffe, W. J. Cantwell, G. S. Langdon, G. N. Nurick, and M. D. Theobald. 2008. “The Quasi-static and Blast Loading Response of Lattice Structures.” International Journal of Impact Engineering 35: 795–810. doi:10.1016/j.ijimpeng.2007.10.005.
- Melchels, F. P. W., K. Bertoldi, R. Gabbrielli, A. H. Velders, J. Feijen, and D. W. Grijpma. 2010. “Mathematically Defined Tissue Engineering Scaffold Architectures Prepared by Stereolithography.” Biomaterials 31: 6909–6916. doi:10.1016/j.biomaterials.2010.05.068.
- Nouri, H., S. Guessasma, and S. Belhabib. 2016. “Structural Imperfections in Additive Manufacturing Perceived from the X-ray Micro-tomography Perspective.” Journal of Materials Processing Technology 234: 113–124. doi:10.1016/j.jmatprotec.2016.03.019.
- Panesar, A., M. Abdi, D. Hickman, and I. Ashcroft. 2018. “Strategies for Functionally Graded Lattice Structures Derived Using Topology Optimisation for Additive Manufacturing.” Additive Manufacturing 19: 81–94. doi:10.1016/j.addma.2017.11.008.
- Riddick, J. C., M. A. Haile, R. V. Wahlde, D. P. Cole, O. Bamiduro, and T. E. Johnson. 2016. “Fractographic Analysis of Tensile Failure of Acrylonitrile-Butadiene-Styrene Fabricated by Fused Deposition Modeling.” Additive Manufacturing 11: 49–59. doi:10.1016/j.addma.2016.03.007.
- Sood, A. K., R. K. Ohdar, and S. S. Mahapatra. 2009. “Improving Dimensional Accuracy of Fused Deposition Modelling Processed Part Using Grey Taguchi Method.” Materials & Design 30: 4243–4252. doi:10.1016/j.matdes.2009.04.030.
- Sood, A. K., R. K. Ohdar, and S. S. Mahapatra. 2010. “Parametric Appraisal of Mechanical Property of Fused Deposition Modelling Processed Parts.” Materials & Design 31: 287–295. doi:10.1016/j.matdes.2009.06.016.
- Sychov, M. M., L. A. Lebedev, S. V. Dyachenko, and L. A. Nefedova. 2018. “Mechanical Properties of Energy-absorbing Structures with Triply Periodic Minimal Surface Topology.” Acta Astronautica 150: 81–84. doi:10.1016/j.actaastro.2017.12.034.
- Vesenjak, M., L. Krstulović-Opara, Z. Ren, and Ž. Domazet. 2010. “Cell Shape Effect Evaluation of Polyamide Cellular Structures.” Polymer Testing 29: 991–994. doi:10.1016/j.polymertesting.2010.09.001.
- Wang, J., H. Xie, Z. Weng, T. Senthil, and L. Wu. 2016. “A Novel Approach to Improve Mechanical Properties of Parts Fabricated by Fused Deposition Modeling.” Materials & Design 105: 152–159. doi:10.1016/j.matdes.2016.05.078.
- Xu, Z., Q. Wang, and J. Li. 2017. “Modeling Porous Structures with Fractal Rough Topography Based on Triply Periodic Minimal Surface for Additive Manufacturing.” Rapid Prototyping Journal 23: 257–272. doi:10.1108/RPJ-09-2015-0121.
- Yan, C., L. Hao, A. Hussein, P. Young, J. Huang, and W. Zhu. 2015. “Microstructure and Mechanical Properties of Aluminium Alloy Cellular Lattice Structures Manufactured by Direct Metal Laser Sintering.” Materials Science and Engineering: A 628: 238–246. doi:10.1016/j.msea.2015.01.063.
- Yang, N., C. Du, S. Wang, Y. Yang, and C. Zhang. 2016. “Mathematically Defined Gradient Porous Materials.” Materials Letters 173: 136–140. doi:10.1016/j.matlet.2016.03.021.
- Yang, S., K. F. Leong, Z. Du, and C. K. Chua. 2001. “The Design of Scaffolds for Use in Tissue Engineering. Part I. Traditional Factors.” Tissue Engineering 7: 679–689. doi:10.1089/107632701753337645.