Effect of melting modes on microstructure and tribological properties of selective laser melted AlSi10Mg alloy

References

• Aboulkhair, Nesma T., Ian Maskery, Chris Tuck, Ian Ashcroft, and Nicola M. Everitt. 2016. “On the Formation of AlSi10Mg Single Tracks and Layers in Selective Laser Melting: Microstructure and Nano-Mechanical Properties.” Journal of Materials Processing Technology 230: 88–98. doi: https://doi.org/10.1016/j.jmatprotec.2015.11.016
   Google Scholar
• Aboulkhair, Nesma T., Marco Simonelli, Luke Parry, Ian Ashcroft, Christopher Tuck, and Richard Hague. 2019. “3D Printing of Aluminium Alloys: Additive Manufacturing of Aluminium Alloys Using Selective Laser Melting.” Progress in Materials Science 106: 100578. doi: https://doi.org/10.1016/j.pmatsci.2019.100578
   Web of Science ®Google Scholar
• Basavakumar, K. G., P. G. Mukunda, and M. Chakraborty. 2009. “Dry Sliding Wear Behaviour of Al–12Si and Al–12Si–3Cu Cast Alloys.” Materials & Design 30 (4): 1258–1267. doi: https://doi.org/10.1016/j.matdes.2008.07.003
   Google Scholar
• Bi, Jiang, Zhenglong Lei, Yanbin Chen, Xi Chen, Ze Tian, Jingwei Liang, Xikun Qin, and Xinrui Zhang. 2020. “Densification, Microstructure and Mechanical Properties of an Al-14.1Mg-0.47Si-0.31Sc-0.17Zr Alloy Printed by Selective Laser Melting.” Materials Science and Engineering: A 774: 138931. doi: https://doi.org/10.1016/j.msea.2020.138931
   Web of Science ®Google Scholar
• Cunningham, Ross, Cang Zhao, Niranjan Parab, Christopher Kantzos, Joseph Pauza, Kamel Fezzaa, Tao Sun, and Anthony D. Rollett. 2019. “Keyhole Threshold and Morphology in Laser Melting Revealed by Ultrahigh-Speed x-ray Imaging.” Science 363 (6429): 849–852. doi: https://doi.org/10.1126/science.aav4687
   PubMed Web of Science ®Google Scholar
• Demir, Ali Gökhan, and Carlo Alberto Biffi. 2019. “Micro Laser Metal Wire Deposition of Thin-Walled Al Alloy Components: Process and Material Characterization.” Journal of Manufacturing Processes 37: 362–369. doi: https://doi.org/10.1016/j.jmapro.2018.11.017
   Google Scholar
• Deuis, R. L., C. Subramanian, and J. M. Yellup. 1997. “Dry Sliding Wear of Aluminium Composites: A Review.” Composites Science and Technology 57 (4): 415–435. doi: https://doi.org/10.1016/S0266-3538(96)00167-4
   Web of Science ®Google Scholar
• Dowden, John. 2009. The Theory of Laser Materials Processing.
   Google Scholar
• Ehtemam-Haghighi, Shima, Guanghui Cao, and Lai-Chang Zhang. 2017. “Nanoindentation Study of Mechanical Properties of Ti Based Alloys with Fe and Ta Additions.” Journal of Alloys and Compounds 692: 892–897. doi: https://doi.org/10.1016/j.jallcom.2016.09.123
   Web of Science ®Google Scholar
• Ghayoor, Milad, Kijoon Lee, Yujuan He, Chih-hung Chang, Brian K Paul, and Somayeh Pasebani. 2019. “Selective Laser Melting of 304 L Stainless Steel: Role of Volumetric Energy Density on the Microstructure, Texture and Mechanical Properties.” Additive Manufacturing 32: 101011. doi: https://doi.org/10.1016/j.addma.2019.101011
   Google Scholar
• Girelli, L., M. Tocci, L. Montesano, M. Gelfi, and A. Pola. 2017. “Optimization of Heat Treatment Parameters for Additive Manufacturing and Gravity Casting AlSi10Mg Alloy.” IOP Conference Series: Materials Science and Engineering 264: 012016. doi: https://doi.org/10.1088/1757-899X/264/1/012016
   Google Scholar
• Greer, A. L., K. L. Rutherford, and I. M. Hutchings. 2002. “Wear Resistance of Amorphous Alloys and Related Materials.” International Materials Reviews 47 (2): 87–112. doi: https://doi.org/10.1179/095066001225001067
   Web of Science ®Google Scholar
• Guo, Meng, Dongdong Gu, Lixia Xi, Lei Du, Hongmei Zhang, and Jiayao Zhang. 2019. “Formation of Scanning Tracks During Selective Laser Melting (SLM) of Pure Tungsten Powder: Morphology, Geometric Features and Forming Mechanisms.” International Journal of Refractory Metals and Hard Materials 79: 37–46. doi: https://doi.org/10.1016/j.ijrmhm.2018.11.003
   Web of Science ®Google Scholar
• Guraya, T., S. Singamneni, and Z. W. Chen. 2019. “Microstructure Formed During Selective Laser Melting of IN738LC in Keyhole Mode.” Journal of Alloys and Compounds 792: 151–160. doi: https://doi.org/10.1016/j.jallcom.2019.03.419
   Web of Science ®Google Scholar
• Hadadzadeh, Amir, Babak Shalchi Amirkhiz, and Mohsen Mohammadi. 2019. “Contribution of Mg2Si Precipitates to the Strength of Direct Metal Laser Sintered AlSi10Mg.” Materials Science and Engineering: A 739: 295–300. doi: https://doi.org/10.1016/j.msea.2018.10.055
   Web of Science ®Google Scholar
• Herrera-Jimenez, E. J., A. Raveh, T. Schmitt, E. Bousser, J. E. Klemberg-Sapieha, and L. Martinu. 2019. “Solid Solution Hardening in Nanolaminate ZrN-TiN Coatings with Enhanced Wear Resistance.” Thin Solid Films 688: 137431. doi: https://doi.org/10.1016/j.tsf.2019.137431
   Google Scholar
• Joshi, Sumit, Ramesh Chandra Singh, and Rajiv Chaudhary. 2019. “Microstructural and Wear Characterisation of as-Cast AS21A Magnesium Alloy.” Journal of Physics: Conference Series 1240: 012127.
   Google Scholar
• Kang, Nan, Pierre Coddet, Hanlin Liao, Tiphaine Baur, and Christian Coddet. 2016. “Wear Behavior and Microstructure of Hypereutectic Al-Si Alloys Prepared by Selective Laser Melting.” Applied Surface Science 378: 142–149. doi: https://doi.org/10.1016/j.apsusc.2016.03.221
   Web of Science ®Google Scholar
• Leary, Martin, Tobias Maconachie, Avik Sarker, Omar Faruque, and Milan Brandt. 2019. “Mechanical and Thermal Characterisation of AlSi10Mg SLM Block Support Structures.” Materials & Design 183: 108138. doi: https://doi.org/10.1016/j.matdes.2019.108138
   Web of Science ®Google Scholar
• Li, Y., J. Zhou, P. Pavanram, M. A. Leeflang, L. I. Fockaert, B. Pouran, N. Tümer, K.-U. Schröder, J. M. C. Mol, and H. Weinans. 2018. “Additively Manufactured Biodegradable Porous Magnesium.” Acta Biomaterialia 67: 378–392. doi: https://doi.org/10.1016/j.actbio.2017.12.008
   PubMed Web of Science ®Google Scholar
• Long, Teng, Xiaohong Zhang, Qianli Huang, Ling Liu, Yong Liu, Junye Ren, Yong Yin, Dengke Wu, and Hong Wu. 2018. “Novel Mg-Based Alloys by Selective Laser Melting for Biomedical Applications: Microstructure Evolution, Microhardness and in Vitro Degradation Behaviour.” Virtual and Physical Prototyping 13 (2): 71–81. doi: https://doi.org/10.1080/17452759.2017.1411662
   Web of Science ®Google Scholar
• Mao, Cong, Chang Liang, Yuchen Zhang, Mingjun Zhang, Yongle Hu, and Zhuming Bi. 2017. “Grinding Characteristics of cBN-WC-10Co Composites.” Ceramics International 43 (18): 16539–16547. doi: https://doi.org/10.1016/j.ceramint.2017.09.040
   Google Scholar
• Medeiros, B. B., M. M. Medeiros, J. Fornell, J. Sort, M. D. Baró, and A. M. Jorge Junior. 2015. “Nanoindentation Response of Cu–Ti Based Metallic Glasses: Comparison Between as-Cast, Relaxed and Devitrified States.” Journal of Non-Crystalline Solids 425: 103–109. doi: https://doi.org/10.1016/j.jnoncrysol.2015.05.035
   Google Scholar
• Mizev, A. I., and D. Schwabe. 2009. “Convective Instabilities in Liquid Layers with Free Upper Surface Under the Action of an Inclined Temperature Gradient.” Physics of Fluids 21 (11): 112102. doi: https://doi.org/10.1063/1.3251755
   Web of Science ®Google Scholar
• Okoro, Avwerosuoghene Moses, Ronald Machaka, Senzeni Sipho Lephuthing, Samuel Ranti Oke, Mary Ajimegoh Awotunde, and Peter Apata Olubambi. 2019. “Nanoindentation Studies of the Mechanical Behaviours of Spark Plasma Sintered Multiwall Carbon Nanotubes Reinforced Ti6Al4 V Nanocomposites.” Materials Science and Engineering: A 765: 138320. doi: https://doi.org/10.1016/j.msea.2019.138320
   Google Scholar
• Oliver, Warren Carl, and George Mathews Pharr. 1992. “An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments.” Journal of Materials Research 7 (6): 1564–1583. doi: https://doi.org/10.1557/JMR.1992.1564
   Web of Science ®Google Scholar
• Pintaude, Giuseppe. 2013. “Introduction of the Ratio of the Hardness to the Reduced Elastic Modulus for Abrasion.” In Tribology-Fundamentals and Advancements. IntechOpen.
   Google Scholar
• Prashanth, K. G., B. Debalina, Z. Wang, P. F. Gostin, A. Gebert, M. Calin, U. Kühn, M. Kamaraj, S. Scudino, and J. Eckert. 2014. “Tribological and Corrosion Properties of Al–12Si Produced by Selective Laser Melting.” Journal of Materials Research 29 (17): 2044–2054. doi: https://doi.org/10.1557/jmr.2014.133
   Web of Science ®Google Scholar
• Qi, Ting, Haihong Zhu, Hu Zhang, Jie Yin, Linda Ke, and Xiaoyan Zeng. 2017. “Selective Laser Melting of Al7050 Powder: Melting Mode Transition and Comparison of the Characteristics Between the Keyhole and Conduction Mode.” Materials & Design 135: 257–266. doi: https://doi.org/10.1016/j.matdes.2017.09.014
   Web of Science ®Google Scholar
• Riley, R. J., and G. P. Neitzel. 1998. “Instability of Thermocapillary–Buoyancy Convection in Shallow Layers. Part 1. Characterization of Steady and Oscillatory Instabilities.” Journal of Fluid Mechanics 359: 143–164. doi: https://doi.org/10.1017/S0022112097008343
   Web of Science ®Google Scholar
• Robinson, Joseph Henry, Ian Robert Thomas Ashton, Eric Jones, Peter Fox, and Chris Sutcliffe. 2019. “The Effect of Hatch Angle Rotation on Parts Manufactured Using Selective Laser Melting.” Rapid Prototyping Journal 25 (2): 289–298. doi: https://doi.org/10.1108/RPJ-06-2017-0111
   Google Scholar
• Shrestha, Subin, and Y. Kevin Chou. 2019. “A Numerical Study on the Keyhole Formation During Laser Powder Bed Fusion Process.” Journal of Manufacturing Science and Engineering 141 (10): 101002. doi: https://doi.org/10.1115/1.4044100
   Google Scholar
• Sol, T., S. Hayun, D. Noiman, E. Tiferet, O. Yeheskel, and O. Tevet. 2018. “Nondestructive Ultrasonic Evaluation of Additively Manufactured AlSi10Mg Samples.” Additive Manufacturing 22: 700–707. doi: https://doi.org/10.1016/j.addma.2018.06.016
   Web of Science ®Google Scholar
• Tang, Wei-chen, Zhong-yu Piao, Jian Zhang, Shi-ying Liu, and Li-jun Deng. 2020. “Effect of Trace Elements on the Pinhole Fatigue-Resistance of Gasoline Al-Si Piston Alloy.” Engineering Failure Analysis 108: 104340. doi: https://doi.org/10.1016/j.engfailanal.2019.104340
   Google Scholar
• Teng, Chong, Deepankar Pal, Haijun Gong, Kai Zeng, Kevin Briggs, Nachiket Patil, and Brent Stucker. 2017. “A Review of Defect Modeling in Laser Material Processing.” Additive Manufacturing 14: 137–147. doi: https://doi.org/10.1016/j.addma.2016.10.009
   Web of Science ®Google Scholar
• Thanki, Aditi, Louca Goossens, Raya Mertens, Gabriel Probst, Wim Dewulf, Ann Witvrouw, and Shofeng Yang. 2019. “Study of Keyhole-Porosities in Selective Laser Melting Using X-ray Computed Tomography.” Proceedings of iCT 2019: 1–7.
   Google Scholar
• Trevisan, Francesco, Flaviana Calignano, Massimo Lorusso, Jukka Pakkanen, Alberta Aversa, Elisa Ambrosio, Mariangela Lombardi, Paolo Fino, and Diego Manfredi. 2017. “On the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties.” Materials 10 (1): 76. doi: https://doi.org/10.3390/ma10010076
   PubMed Web of Science ®Google Scholar
• Tsotridis, G., H. Rother, and E. D. Hondros. 1989. “Marangoni Flow and the Shapes of Laser-Melted Pools.” The Science of Nature 76 (5): 216–218. doi: https://doi.org/10.1007/BF00627691
   Google Scholar
• Vierneusel, Bernd, Lisa Benker, Stephan Tremmel, Mathias Göken, and Benoit Merle. 2017. “Isolating the Effect of Residual Stresses on Coating Wear by a Mechanical Stress Relaxation Technique.” Thin Solid Films 638: 159–166. doi: https://doi.org/10.1016/j.tsf.2017.06.016
   Google Scholar
• Wahab, M. S., Aqeel Ahmed, A. A. Raus, K. Kamarudin, and E. Z. Radzi. 2019. “The DTA Curves for Melting of Hypereutectic AlSi Alloy.” International Journal of Engineering & Technology 8 (1.1): 31–35.
   Google Scholar
• Wang, Y. Morris, Thomas Voisin, Joseph T. Mckeown, Jianchao Ye, and Ting Zhu. 2017. “Additively Manufactured Hierarchical Stainless Steels with High Strength and Ductility.” Nature Materials 17 (1): 63–71. doi: https://doi.org/10.1038/nmat5021
   PubMedGoogle Scholar
• Wei, Pei, Zhengying Wei, Zhen Chen, Jun Du, Yuyang He, Junfeng Li, and Yatong Zhou. 2017. “The AlSi10Mg Samples Produced by Selective Laser Melting: Single Track, Densification, Microstructure and Mechanical Behavior.” Applied Surface Science 408: 38–50. doi: https://doi.org/10.1016/j.apsusc.2017.02.215
   Web of Science ®Google Scholar
• Wu, Hong, Ian Baker, Yong Liu, Xiaolan Wu, Paul R. Munroe, and Jiangang Zhang. 2013. “Tribological Studies of a Zr-Based Bulk Metallic Glass.” Intermetallics 35: 25–32. doi: https://doi.org/10.1016/j.intermet.2012.11.010
   Web of Science ®Google Scholar
• Wu, Hong, Junye Ren, Qianli Huang, Xiongfei Zai, Ling Liu, Chao Chen, Shifeng Liu, Xin Yang, and Ruidi Li. 2017. “Effect of Laser Parameters on Microstructure, Metallurgical Defects and Property of AlSi10Mg Printed by Selective Laser Melting.” Journal of Micromechanics and Molecular Physics 2(4): 1750017. doi: https://doi.org/10.1142/S2424913017500175
   Google Scholar
• Xi, Lixia, Shuang Guo, Dongdong Gu, Meng Guo, and Kaijie Lin. 2020. “Microstructure Development, Tribological Property and Underlying Mechanism of Laser Additive Manufactured Submicro-TiB2 Reinforced Al-Based Composites.” Journal of Alloys and Compounds 819: 152980. doi: https://doi.org/10.1016/j.jallcom.2019.152980
   Web of Science ®Google Scholar
• Xiong, Z. H., S. L. Liu, S. F. Li, Y. Shi, Y. F. Yang, and R. D. K. Misra. 2019. “Role of Melt Pool Boundary Condition in Determining the Mechanical Properties of Selective Laser Melting AlSi10Mg Alloy.” Materials Science and Engineering: A 740: 148–156. doi: https://doi.org/10.1016/j.msea.2018.10.083
   Web of Science ®Google Scholar
• Yang, Jingjing, Jie Han, Hanchen Yu, Jie Yin, Ming Gao, Zemin Wang, and Xiaoyan Zeng. 2016. “Role of Molten Pool Mode on Formability, Microstructure and Mechanical Properties of Selective Laser Melted Ti-6Al-4V Alloy.” Materials & Design 110: 558–570. doi: https://doi.org/10.1016/j.matdes.2016.08.036
   Web of Science ®Google Scholar
• Yin, Yong, Qianli Huang, Luxin Liang, Xiaobo Hu, Tang Liu, Yuanzhi Weng, Teng Long, Yong Liu, Qingxiang Li, and Shaoqiang Zhou. 2019. “In Vitro Degradation Behavior and Cytocompatibility of ZK30/Bioactive Glass Composites Fabricated by Selective Laser Melting for Biomedical Applications.” Journal of Alloys and Compounds 785: 38–45. doi: https://doi.org/10.1016/j.jallcom.2019.01.165
   Web of Science ®Google Scholar
• Yusoff, Zamri, and Shamsul Baharin Jamaludin. 2011. “Tribology and Development of Wear Theory: Review and Discussion.” International Journal of Current Research and Review 3 (2): 13–26.
   Google Scholar
• Zhang, Jinliang, Bo Song, Qingsong Wei, Dave Bourell, and Yusheng Shi. 2019. “A Review of Selective Laser Melting of Aluminum Alloys: Processing, Microstructure, Property and Developing Trends.” Journal of Materials Science & Technology 35 (2): 270–284. doi:https://doi.org/10.1016/j.jmst.2018.09.004.
   Web of Science ®Google Scholar
• Zhou, F. F., L. P. Xu, C. M. Deng, J. B. Song, C. G. Deng, Y. Wang, and M. Liu. 2019. “Nanomechanical Characterization of Nanostructured La2(Zr0.75Ce0.25)2O7 Thermal Barrier Coatings by Nanoindentation.” Applied Surface Science 505: 144585. doi: https://doi.org/10.1016/j.apsusc.2019.144585
   Google Scholar
• Zhou, Libo, Tiechui Yuan, Ruidi Li, and Lanbo Li. 2019. “Two Ways of Evaluating the Wear Property of Ti-13Nb-13Zr Fabricated by Selective Laser Melting.” Materials Letters 242: 9–12. doi: https://doi.org/10.1016/j.matlet.2019.01.015
   Google Scholar