References
- AlMangour, Bandar, Dariusz Grzesiak, and Jenn-Ming Yang. 2017. “Selective Laser Melting of TiB2/316L Stainless Steel Composites: The Roles of Powder Preparation and hot Isostatic Pressing Post-Treatment.” Powder Technology 309: 37–48. doi:https://doi.org/10.1016/j.powtec.2016.12.073.
- Bermingham, M. J., D. Kent, H. Zhan, D. H. StJohn, and M. S. Dargusch. 2015. “Controlling the Microstructure and Properties of Wire arc Additive Manufactured Ti–6Al–4 V with Trace Boron Additions.” Acta Materialia 91: 289–303. doi:https://doi.org/10.1016/j.actamat.2015.03.035.
- Bermingham, M. J., D. H. StJohn, J. Krynen, S. Tedman-Jones, and M. S. Dargusch. 2019. “Promoting the Columnar to Equiaxed Transition and Grain Refinement of Titanium Alloys During Additive Manufacturing.” Acta Materialia 168: 261–274. doi:https://doi.org/10.1016/j.actamat.2019.02.020.
- Bhattacharjee, A., V. K. Varma, S. V. Kamat, A. K. Gogia, and S. Bhargava. 2006. “Influence of β Grain Size on Tensile Behavior and Ductile Fracture Toughness of Titanium Alloy Ti-10V-2Fe-3Al.” Metallurgical and Materials Transactions A 37 (5): 1423–1433. AAS Photo Bulletin10.1007/s11661-006-0087-x.
- Cheng, Dongji, Jinchao Zhang, Tuo Shi, Gang Li, Jianjun Shi, Lin Lu, and Geyan Fu. 2021. “Microstructure and Mechanical Properties of Additive Manufactured Ti-6Al-4V Components by Annular Laser Metal Deposition in a Semi-Open Environment.” Optics & Laser Technology 135: 106640. doi:https://doi.org/10.1016/j.optlastec.2020.106640.
- Chong, Yan, Guanyu Deng, Si Gao, Jangho Yi, Akinobu Shibata, and Nobuhiro Tsuji. 2019. “Yielding Nature and Hall-Petch Relationships in Ti-6Al-4V Alloy with Fully Equiaxed and Bimodal Microstructures.” Scripta Materialia 172: 77–82. doi:https://doi.org/10.1016/j.scriptamat.2019.07.015.
- Collins, P. C., R. Banerjee, S. Banerjee, and H. L. Fraser. 2003. “Laser Deposition of Compositionally Graded Titanium–Vanadium and Titanium–Molybdenum Alloys.” Materials Science and Engineering: A 352 (1): 118–128. doi:https://doi.org/10.1016/S0921-5093(02)00909-7.
- Hou, Y., B. Liu, Y. Liu, Y. Zhou, T. Song, Q. Zhou, G. Sha, and M. Yan. 2019. “Ultra-low Cost Ti Powder for Selective Laser Melting Additive Manufacturing and Superior Mechanical Properties Associated.” Opto-Electronic Advances 2 (005): 10–17. doi:https://doi.org/10.29026/oea.2019.180028.
- Jiang, Bi, Lei Zhenglong, Chen Xi, Li Peng, Lu Nannan, and Chen Yanbin. 2019. “Microstructure and Mechanical Properties of TiB2-Reinforced 7075 Aluminum Matrix Composites Fabricated by Laser Melting Deposition.” Ceramics International 45 (5): 5680–5692. doi:https://doi.org/10.1016/j.ceramint.2018.12.033.
- Lewandowski, John J., and Mohsen Seifi. 2016. “Metal Additive Manufacturing: A Review of Mechanical Properties.” Annual Review of Materials Research 46 (1): 151–186. doi:https://doi.org/10.1146/annurev-matsci-070115-032024.
- Li, Cheng-Lin, Jae-Keun Hong, P. L. Narayana, Seong-Woo Choi, Sang Won Lee, Chan Hee Park, Jong-Taek Yeom, and Qingsong Mei. 2021. “Realizing Superior Ductility of Selective Laser Melted Ti-6Al-4V Through a Multi-Step Heat Treatment.” Materials Science and Engineering: A 799: 140367. doi:https://doi.org/10.1016/j.msea.2020.140367.
- Li, Jiaqiang, Xin Lin, Min Zheng, Jian Wang, Pengfei Guo, Tuo Qin, Minghui Zhu, Weidong Huang, and Haiou Yang. 2018. “Distinction in Anodic Dissolution Behavior on Different Planes of Laser Solid Formed Ti-6Al-4V Alloy.” Electrochimica Acta 283: 1482–1489. doi:https://doi.org/10.1016/j.electacta.2018.07.112.
- Luo, Peng, Qiaodan Hu, and Xiaolin Wu. 2016. “Quantitatively Analyzing Strength Contribution vs Grain Boundary Scale Relation in Pure Titanium Subjected to Severe Plastic Deformation.” Metallurgical and Materials Transactions A 47 (5): 1922–1928. doi:https://doi.org/10.1007/s11661-016-3391-0.
- Mantri, S. A., and R. Banerjee. 2018. “Microstructure and Micro-Texture Evolution of Additively Manufactured β-Ti Alloys.” Additive Manufacturing 23: 86–98. doi:https://doi.org/10.1016/j.addma.2018.07.013.
- Mereddy, S., M. J. Bermingham, D. H. StJohn, and M. S. Dargusch. 2017. “Grain Refinement of Wire arc Additively Manufactured Titanium by the Addition of Silicon.” Journal of Alloys and Compounds 695: 2097–2103. doi:https://doi.org/10.1016/j.jallcom.2016.11.049.
- Mosallanejad, Mohammad Hossein, Behzad Niroumand, Alberta Aversa, and Abdollah Saboori. 2021. “In-situ Alloying in Laser-Based Additive Manufacturing Processes: A Critical Review.” Journal of Alloys and Compounds 872: 159567. doi:https://doi.org/10.1016/j.jallcom.2021.159567.
- Ren, Y. M., X. Lin, X. Fu, H. Tan, J. Chen, and W. D. Huang. 2017. “Microstructure and Deformation Behavior of Ti-6Al-4V Alloy by High-Power Laser Solid Forming.” Acta Materialia 132: 82–95. doi:https://doi.org/10.1016/j.actamat.2017.04.026.
- Sasano, Hisaoki, and Hirozo Kimura. 1980. “Solid-solution Strengthening of Alpha Titanium Alloys.” 2-4: 1147–1154. https://cdn.ymaws.com/titanium.org/resource/resmgr/ZZ-WTCP1980-VOL2/1980_Vol_2.-4-Solid-Solution.pdf.
- Sing, S. L., S. Huang, G. D. Goh, G. L. Goh, C. F. Tey, J. H. K. Tan, and W. Y. Yeong. 2021. “Emerging Metallic Systems for Additive Manufacturing: In-Situ Alloying and Multi-Metal Processing in Laser Powder bed Fusion.” Progress in Materials Science 119: 100795. doi:https://doi.org/10.1016/j.pmatsci.2021.100795.
- Tan, C., S. F. Li, Y. F. Yang, Q. S. Zhu, C. Q. Hu, Y. Shi, and P. P. Lv. 2018. “Sintering Response and Equiaxed α-Ti Grain Formation in the Ti Alloys Sintered from Ti@Ni Core–Shell Powders.” Metallurgical and Materials Transactions A 49 (8): 3394–3401. doi:https://doi.org/10.1007/s11661-018-4698-9.
- Todaro, C. J., M. A. Easton, D. Qiu, D. Zhang, M. J. Bermingham, E. W. Lui, M. Brandt, D. H. StJohn, and M. Qian. 2020. “Grain Structure Control During Metal 3D Printing by High-Intensity Ultrasound.” Nature Communications 11 (1): 142. doi:https://doi.org/10.1038/s41467-019-13874-z.
- Xiong, Zhihui, Xiaotong Pang, Shilong Liu, Zhuguo Li, and R. D. K. Misra. 2021. “Hierarchical Refinement of Nickel-Microalloyed Titanium During Additive Manufacturing.” Scripta Materialia 195: 113727. doi:https://doi.org/10.1016/j.scriptamat.2021.113727.
- Xu, W., E. W. Lui, A. Pateras, M. Qian, and M. Brandt. 2017. “In Situ Tailoring Microstructure in Additively Manufactured Ti-6Al-4V for Superior Mechanical Performance.” Acta Materialia 125: 390–400. doi:https://doi.org/10.1016/j.actamat.2016.12.027.
- Xue, Aitang, Xin Lin, Lilin Wang, Jian Wang, and Weidong Huang. 2019. “Influence of Trace Boron Addition on Microstructure, Tensile Properties and Their Anisotropy of Ti6Al4 V Fabricated by Laser Directed Energy Deposition.” Materials & Design 181: 107943. doi:https://doi.org/10.1016/j.matdes.2019.107943.
- Zhang, Baicheng, Guijun Bi, Pei Wang, Jiaming Bai, Youxiang Chew, and Muiling Sharon Nai. 2016a. “Microstructure and Mechanical Properties of Inconel 625/Nano-TiB2 Composite Fabricated by LAAM.” Materials & Design 111: 70–79. doi:https://doi.org/10.1016/j.matdes.2016.08.078.
- Zhang, Q., J. Chen, X. Lin, H. Tan, and W. D. Huang. 2016b. “Grain Morphology Control and Texture Characterization of Laser Solid Formed Ti6Al2Sn2Zr3Mo1.5Cr2Nb Titanium Alloy.” Journal of Materials Processing Technology 238: 202–211. doi:https://doi.org/10.1016/j.jmatprotec.2016.07.011.
- Zhang, Qiang, Jing Chen, Zhongliang Qi, Xin Lin, Hua Tan, and Weidong Huang. 2018. “A Processing Route for Achieving Isotropic Tensile Properties in Laser Solid Formed α+β Titanium Alloy.” Metallurgical and Materials Transactions A 49 (8): 3651–3662. doi:https://doi.org/10.1007/s11661-018-4695-z.
- Zhang, Yinling, Zhuo Chen, Shoujiang Qu, Aihan Feng, Guangbao Mi, Jun Shen, Xu Huang, and Daolun Chen. 2021a. “Multiple α sub-Variants and Anisotropic Mechanical Properties of an Additively-Manufactured Ti-6Al-4V Alloy.” Journal of Materials Science & Technology 70: 113–124. doi:https://doi.org/10.1016/j.jmst.2020.06.039.
- Zhang, Qiang, Jing Chen, Zhuang Zhao, Hua Tan, Xin Lin, and Weidong Huang. 2016c. “Microstructure and Anisotropic Tensile Behavior of Laser Additive Manufactured TC21 Titanium Alloy.” Materials Science and Engineering: A 673: 204–212. doi:https://doi.org/10.1016/j.msea.2016.07.040.
- Zhang, Duyao, Dong Qiu, Mark A. Gibson, Yufeng Zheng, Hamish L. Fraser, David H. StJohn, and Mark A. Easton. 2019. “Additive Manufacturing of Ultrafine-Grained High-Strength Titanium Alloys.” Nature 576 (7785): 91–95. doi:https://doi.org/10.1038/s41586-019-1783-1.
- Zhang, Siyu, Qiang Zhang, Min Zheng, Yunlong Hu, Shang Sui, Jing Chen, and Xin Lin. 2021b. “Grain Refinement and Improved Tensile Properties of Ti5Al2Sn2Zr4Mo4Cr Titanium Alloy Fabricated by Laser Solid Forming.” Materials Science and Engineering: A 800: 140388. doi:https://doi.org/10.1016/j.msea.2020.140388.
- Zhao, Zhuang, Jing Chen, Shuai Guo, Hua Tan, Xin Lin, and Weidong Huang. 2017. “Influence of α/β Interface Phase on the Tensile Properties of Laser Cladding Deposited Ti–6Al–4 V Titanium Alloy.” Journal of Materials Science & Technology 33 (7): 675–681. doi:https://doi.org/10.1016/j.jmst.2016.09.026.
- Zhao, Zhuang, Jing Chen, Hua Tan, Guohao Zhang, Xin Lin, and Weidong Huang. 2018. “Achieving Superior Ductility for Laser Solid Formed Extra low Interstitial Ti-6Al-4V Titanium Alloy Through Equiaxial Alpha Microstructure.” Scripta Materialia 146: 187–191. doi:https://doi.org/10.1016/j.scriptamat.2017.11.021.
- Zhao, G. H., X. Z. Liang, B. Kim, and P. E. J. Rivera-Díaz-del-Castillo. 2019. “Modelling Strengthening Mechanisms in Beta-Type Ti Alloys.” Materials Science and Engineering: A 756: 156–160. doi:https://doi.org/10.1016/j.msea.2019.04.027.