References
- Adam, Guido A. O., and Detmar Zimmer. 2015. “On Design for Additive Manufacturing: Evaluating Geometrical Limitations.” Rapid Prototyping Journal 21 (6): 662–670. doi:https://doi.org/10.1108/RPJ-06-2013-0060.
- Ashby, M. F. 2006. “The Properties of Foams and Lattices.” Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 364 (1838): 15–30. doi:https://doi.org/10.1098/rsta.2005.1678.
- Bhat, Chinmai, Ajeet Kumar, and Jeng-Ywan Jeng. 2021. “Effect of Atomic Tessellations on Structural and Functional Properties of Additive Manufactured Lattice Structures.” Additive Manufacturing 47 (November): 102326. doi:https://doi.org/10.1016/j.addma.2021.102326.
- Calignano, Flaviana, Federico Giuffrida, and Manuela Galati. 2021. “Effect of the Build Orientation on the Mechanical Performance of Polymeric Parts Produced by Multi Jet Fusion and Selective Laser Sintering.” Journal of Manufacturing Processes 65 (January). Elsevier Ltd: 271–282. doi:https://doi.org/10.1016/j.jmapro.2021.03.018.
- Campana, Giampaolo, Eckart Uhlmann, Mattia Mele, Luca Raffaelli, André Bergmann, Jaroslaw Kochan, and Julian Polte. 2021. “Numerical Investigation Into Cleanability of Support Structures Produced by Powder Bed Fusion Technology.” Rapid Prototyping Journal ahead-of-p (ahead-of-print). doi:https://doi.org/10.1108/RPJ-02-2021-0039.
- Cheah, C. M., C. K. Chua, K. F. Leong, and S. W. Chua. 2003. “Development of a Tissue Engineering Scaffold Structure Library for Rapid Prototyping. Part 1: Investigation and Classification.” The International Journal of Advanced Manufacturing Technology 21 (4): 291–301. doi:https://doi.org/10.1007/s001700300034.
- Choat, Brendan, Alexander R. Cobb, and Steven Jansen. 2008. “Structure and Function of Bordered Pits: New Discoveries and Impacts on Whole-Plant Hydraulic Function.” New Phytologist 177 (3): 608–626. doi:https://doi.org/10.1111/j.1469-8137.2007.02317.x.
- Collini, Luca, Chiara Ursini, and Ajeet Kumar. 2021. “Design and Optimization of 3D Fast Printed Cellular Structures.” Material Design & Processing Communications 3 (4), doi:https://doi.org/10.1002/mdp2.227.
- Dadbakhsh, Sasan, Leander Verbelen, Olivier Verkinderen, Dieter Strobbe, Peter Van Puyvelde, and Jean-Pierre Kruth. 2017. “Effect of PA12 Powder Reuse on Coalescence Behaviour and Microstructure of SLS Parts.” European Polymer Journal 92 (May). Elsevier: 250–262. doi:https://doi.org/10.1016/j.eurpolymj.2017.05.014.
- Diegel, Olaf, Axel Nordin, and Damien Motte. 2019. “Post-Processing.” In A Practical Guide to Design for Additive Manufacturing, 181–207. Springer Series in Advanced Manufacturing. Singapore: Springer Singapore. doi:https://doi.org/10.1007/978-981-13-8281-9_12.
- du Plessis, Anton, Chris Broeckhoven, Ina Yadroitsava, Igor Yadroitsev, Clive H. Hands, Ravi Kunju, and Dhruv Bhate. 2019. “Beautiful and Functional: A Review of Biomimetic Design in Additive Manufacturing.” Additive Manufacturing 27 (March). Elsevier: 408–427. doi:https://doi.org/10.1016/j.addma.2019.03.033.
- Dudukovic, Nikola A., Erika J. Fong, Hawi B. Gemeda, Joshua R. DeOtte, Maira R. Cerón, Bryan D. Moran, Jonathan T. Davis, Sarah E. Baker, and Eric B. Duoss. 2021. “Cellular Fluidics.” Nature 595 (7865): 58–65. doi:https://doi.org/10.1038/s41586-021-03603-2.
- Gao, Wei, Yunbo Zhang, Devarajan Ramanujan, Karthik Ramani, Yong Chen, Christopher B. Williams, Charlie C.L. Wang, Yung C. Shin, Song Zhang, and Pablo D. Zavattieri. 2015. “The Status, Challenges, and Future of Additive Manufacturing in Engineering.” Computer-Aided Design 69 (December): 65–89. doi:https://doi.org/10.1016/j.cad.2015.04.001.
- Gibson, Ian, David Rosen, Brent Stucker, and Mahyar Khorasani. 2021. “Additive Manufacturing Technologies.” Cham: Springer International Publishing, doi:https://doi.org/10.1007/978-3-030-56127-7.
- Gibson, Lorna J., and M. F. Ashby. 2007. “Book- Cellular_Solid.Pdf.”.
- Hasib, Hazman, Ola L.A. Harrysson, and Harvey A. West. 2015. “Powder Removal from Ti-6Al-4V Cellular Structures Fabricated via Electron Beam Melting.” JOM Journal of the Minerals Metals and Materials Society 67 (3): 639–646. doi:https://doi.org/10.1007/s11837-015-1307-x.
- Henk Kaarle Versteeg, Weeratunge Malalasekera. 2007. An Introduction to Computational Fluid Dynamics: The Finite Volume Method. Pearson Education Limited. https://books.google.com.tw/books?id = RvBZ-UMpGzIC.
- Hunter, Luke W., David Brackett, Nick Brierley, Jian Yang, and Moataz M. Attallah. 2020. “Assessment of Trapped Powder Removal and Inspection Strategies for Powder Bed Fusion Techniques.” The International Journal of Advanced Manufacturing Technology 106 (9–10). The International Journal of Advanced Manufacturing Technology: 4521–4532. doi:https://doi.org/10.1007/s00170-020-04930-w.
- Jiang, Shengqiang, Chunyan Duan, Yixuan Ye, Chao Tang, and Xiaodong Chen. 2019. “Discrete Element Simulation of Factors Affecting the Fluidity of Nylon Powder.” Mathematical Problems in Engineering 2019 (August): 1–10. doi:https://doi.org/10.1155/2019/1082504.
- Kumar, Ajeet, Luca Collini, Alix Daurel, and Jeng Ywan Jeng. 2020a. “Design and Additive Manufacturing of Closed Cells from Supportless Lattice Structure.” Additive Manufacturing, doi:https://doi.org/10.1016/j.addma.2020.101168.
- Kumar, Ajeet, Saurav Verma, and Jeng-ywan Jeng. 2020b. “Supportless Lattice Structures for Energy Absorption Fabricated by Fused Deposition Modeling.” 3D Printing and Additive Manufacturing 7 (2): 85–96. doi:https://doi.org/10.1089/3dp.2019.0089.
- Launder, B. E., and D. B. Spalding. 1974. “The Numerical Computation of Turbulent Flows.” Computer Methods in Applied Mechanics and Engineering 3 (2): 269–289. doi:https://doi.org/10.1016/0045-7825(74)90029-2.
- Mawatari, Yoshihide, Yasumasa Hamada, Masato Yamamura, and Hiroyuki Kage. 2015. “Flow Pattern Transition of Fine Cohesive Powders in a Gas-Solid Fluidized Bed Under Mechanical Vibrating Conditions.” Procedia Engineering 102: 945–951. doi:https://doi.org/10.1016/j.proeng.2015.01.216.
- Mostafaei, Amir, Amy M. Elliott, John E. Barnes, Fangzhou Li, Wenda Tan, Corson L. Cramer, Peeyush Nandwana, and Markus Chmielus. 2021. “Binder Jet 3D Printing—Process Parameters, Materials, Properties, Modeling, and Challenges.” Progress in Materials Science 119 (May 2020). Elsevier Ltd: 100707. doi:https://doi.org/10.1016/j.pmatsci.2020.100707.
- O’Connor, Heather J., Andrew N. Dickson, and Denis P. Dowling. 2018a. “Evaluation of the Mechanical Performance of Polymer Parts Fabricated Using a Production Scale Multi Jet Fusion Printing Process.” Additive Manufacturing 22 (April). Elsevier: 381–387. doi:https://doi.org/10.1016/j.addma.2018.05.035.
- O’Connor, Heather J., Andrew N. Dickson, and Denis P. Dowling. 2018b. “Evaluation of the Mechanical Performance of Polymer Parts Fabricated Using a Production Scale Multi Jet Fusion Printing Process.” Additive Manufacturing 22 (August): 381–387. doi:https://doi.org/10.1016/j.addma.2018.05.035.
- Pandelidi, Chrysoula, Kok Peng Marcian Lee, and Mladenko Kajtaz. 2021. “Effects of Polyamide-11 Powder Refresh Ratios in Multi-Jet Fusion: A Comparison of New and Used Powder.” Additive Manufacturing 40 (February). Elsevier B.V.: 101933. doi:https://doi.org/10.1016/j.addma.2021.101933.
- Pharmacognosy. 2019. “Complex Tissues (Xylem Tissues and Phloem Tissues).” The Pharmacognosy. https://thepharmacognosy.com/complex-tissues-xylem-tissues-and-phloem-tissues/.
- Postprocess. 2020. Annual Additive Post-Printing Survey : Trends Report 2020 ANNUAL EDITION 2020 INTRODUCTION. www.postprocess.com.
- Schiochet Nasato, Daniel, Heiko Briesen, and Thorsten Pöschel. 2021. “Influence of Vibrating Recoating Mechanism for the Deposition of Powders in Additive Manufacturing: Discrete Element Simulations of Polyamide 12.” Additive Manufacturing 48 (July): 102248. doi:https://doi.org/10.1016/j.addma.2021.102248.
- Sillani, Francesco, Rob G. Kleijnen, Marc Vetterli, Manfred Schmid, and Konrad Wegener. 2019. “Selective Laser Sintering and Multi Jet Fusion: Process-Induced Modification of the Raw Materials and Analyses of Parts Performance.” Additive Manufacturing 27 (January). Elsevier: 32–41. doi:https://doi.org/10.1016/j.addma.2019.02.004.
- Solukon. . 2019. “Siemens and Solukon Develop De-Powdering Solution for Complex Additively Manufactured Parts.” https://www.solukon.de/en/.
- Šoškić, Zlatan, Gian Luca Monti, Simona Montanari, Michele Monti, and Marco Cardu. 2021. “Production Cost Model of the Multi-Jet-Fusion Technology.” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 235 (10): 1917–1929. doi:https://doi.org/10.1177/0954406219837300.
- Uhlmann, E., Michael Rethmeier, B. Graf, Robert Kersting, and Andre Bergmann. 2015. “Flexible Manufacturing with an Additive Process Chain Design, Production and Surface Finish.” In ASPE 2015 Spring Topical Meeting: Achieving Precision Tolerances in Additive Manufacturing, 5–9. https://www.researchgate.net/publication/282742543_Flexible_manufacturing_with_an_additive_process_chain_design_production_and_surface_finish.
- Verhaagen, Bram, Thijs Zanderink, and David Fernandez Rivas. 2016. “Ultrasonic Cleaning of 3D Printed Objects and Cleaning Challenge Devices.” Applied Acoustics 103 (February). Elsevier Ltd: 172–181. doi:https://doi.org/10.1016/j.apacoust.2015.06.010.
- Verma, Saurav, Cheng-Kang Yang, Chao-Hsun Lin, and Jeng Ywam Jeng. 2021. “Additive Manufacturing of Lattice Structures for High Strength Mechanical Interlocking of Metal and Resin During Injection Molding.” Additive Manufacturing, November. Elsevier, 102463. doi:https://doi.org/10.1016/j.addma.2021.102463.
- Wang, Guilong, Yang Hui, Lei Zhang, and Guoqun Zhao. 2018. “Research on Temperature and Pressure Responses in the Rapid Mold Heating and Cooling Method Based on Annular Cooling Channels and Electric Heating.” International Journal of Heat and Mass Transfer 116 (January). Elsevier Ltd: 1192–1203. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2017.09.126.
- Wester, Ture. 2002. “Nature Teaching Structures.” International Journal of Space Structures 17 (2–3): 135–147. doi:https://doi.org/10.1260/026635102320321789.
- Wohlers Associates. 2020. Wohlers Report 2020: 3D Printing and Additive Manufacturing Global State of the Industry. https://wohlersassociates.com/2020report.htm.
- Wudy, Katrin, and Dietmar Drummer. 2019. “Aging Effects of Polyamide 12 in Selective Laser Sintering: Molecular Weight Distribution and Thermal Properties.” Additive Manufacturing 25 (November 2018). Elsevier: 1–9. doi:https://doi.org/10.1016/j.addma.2018.11.007.
- Xu, Xiaorong, Emanuel Sachs, and Samuel Allen. 2001. “The Design of Conformal Cooling Channels in Injection Molding Tooling.” Polymer Engineering & Science 41 (7): 1265–1279. doi:https://doi.org/10.1002/pen.10827.
- Yang, Yang, Xuan Song, Xiangjia Li, Zeyu Chen, Chi Zhou, Qifa Zhou, and Yong Chen. 2018. “Recent Progress in Biomimetic Additive Manufacturing Technology: From Materials to Functional Structures.” Advanced Materials 30 (36): 1706539. doi:https://doi.org/10.1002/adma.201706539.
- Yuan, Shangqin, Chee Kai Chua, and Kun Zhou. 2019. “3D-Printed Mechanical Metamaterials with High Energy Absorption.” Advanced Materials Technologies 4 (3): 1800419. doi:https://doi.org/10.1002/admt.201800419.
- Yuan, Shangqin, Jiang Li, Xiling Yao, Jihong Zhu, Xiaojun Gu, Tong Gao, Yingjie Xu, and Weihong Zhang. 2020. “Intelligent Optimization System for Powder Bed Fusion of Processable Thermoplastics.” Additive Manufacturing 34 (May). Elsevier, 101182. doi:https://doi.org/10.1016/j.addma.2020.101182.
- Yuan, Shangqin, Shaoying Li, Jihong Zhu, and Yunlong Tang. 2021. “Additive Manufacturing of Polymeric Composites from Material Processing to Structural Design.” Composites Part B: Engineering 219 (November 2020). Elsevier Ltd: 108903. doi:https://doi.org/10.1016/j.compositesb.2021.108903.