References
- Abe, T., and H. Sasahara. 2016. “Dissimilar Metal Deposition with a Stainless Steel and Nickel-Based Alloy Using Wire and arc-Based Additive Manufacturing.” Precision Engineering 45: 387–395. doi:https://doi.org/10.1016/j.precisioneng.2016.03.016.
- Ahsan, M. R. U., X. Fan, G. J. Seo, C. Ji, M. Noakes, A. Nycz, P. K. Liaw, and D. B. Kim. 2021. “Microstructures and Mechanical Behavior of the Bimetallic Additively-Manufactured Structure (BAMS) of Austenitic Stainless Steel and Inconel 625.” Journal of Materials Science & Technology 74: 176–188. doi:https://doi.org/10.1016/j.jmst.2020.10.001.
- Ahsan, M. R. U., A. N. M. Tanvir, G. J. Seo, B. Bates, W. Hawkins, C. Lee, P. K. Liaw, M. Noakes, A. Nycz, and D. B. Kim. 2020. “Heat-treatment Effects on a Bimetallic Additively-Manufactured Structure (BAMS) of the low-Carbon Steel and Austenitic-Stainless Steel.” Addit. Manuf 32: 101036. doi:https://doi.org/10.1016/j.addma.2020.101036.
- Ahuja, B., M. Karg, and M. Schmidt. 2015. “SPIE Proceedings.” Laser 3D Manuf II 9353: 935304. doi:https://doi.org/10.1117/12.2082521.
- Akula, S., and K. P. Karunakaran. 2006. “Hybrid Adaptive Layer Manufacturing: An Intelligent art of Direct Metal Rapid Tooling Process.” Robotics and Computer-Integrated Manufacturing 22: 113–123. doi:https://doi.org/10.1016/j.rcim.2005.02.006.
- Ansari, M., E. Jabari, and E. Toyserkani. 2021. “Opportunities and Challenges in Additive Manufacturing of Functionally Graded Metallic Materials via Powder-fed Laser Directed Energy Deposition: A Review.” Journal of Materials Processing Technology 294: 117117. doi:https://doi.org/10.1016/j.jmatprotec.2021.117117.
- Balasubramanian, M. 2016. “Characterization of Diffusion-Bonded Titanium Alloy and 304 Stainless Steel with Ag as an Interlayer.” The International Journal of Advanced Manufacturing Technology 82: 153–162. doi:https://doi.org/10.1007/s00170-015-7376-8.
- Balla, V. K., S. Banerjee, S. Bose, and A. Bandyopadhyay. 2010. “Direct Laser Processing of a Tantalum Coating on Titanium for Bone Replacement Structures.” Acta Biomaterialia 6: 2329–2334. doi:https://doi.org/10.1016/j.actbio.2009.11.021.
- Bandyopadhyay, A., and S. Bose. 2016. Additive Manufacturing. Boca Raton: CRC Press, Boca Raton. doi:https://doi.org/10.1201/b18893.
- Bandyopadhyay, Amit, Susmita Bose, and Roger Narayan. 2022. “Translation of 3D-Printed Materials for Medical Applications.” MRS Bulletin 47 (1), doi:https://doi.org/10.1557/s43577-021-00258-2.
- Bandyopadhyay, A., and B. Heer. 2018. “Additive Manufacturing of Multi-Material Structures.” Materials Science and Engineering: R: Reports 129: 1–16. doi:https://doi.org/10.1016/j.mser.2018.04.001.
- Bandyopadhyay, Amit, Kellen D. Traxel, and Susmita Bose. 2021. “Nature-inspired Materials and Structures Using 3D Printing.” Materials Science and Engineering: R: Reports 145: 100609. doi:https://doi.org/10.1016/j.mser.2021.100609.
- Bandyopadhyay, Amit, Kellen D. Traxel, Melanie Lang, Michael Juhasz, Noam Eliaz, and Susmita Bose. 2022. “Alloy Design via Additive Manufacturing: Advantages, Challenges, Applications and Perspectives.” Materials Today, doi:https://doi.org/10.1016/j.mattod.2021.11.026.
- Bandyopadhyay, A., M. Upadhyayula, K. D. Traxel, and B. Onuike. 2019. “Influence of Deposition Orientation on Fatigue Response of LENS™ Processed Ti6Al4V.” Materials Letters 255: 126541. doi:https://doi.org/10.1016/j.matlet.2019.126541.
- Bandyopadhyay, A., Y. Zhang, and S. Bose. 2020. “Recent Developments in Metal Additive Manufacturing.” Current Opinion in Chemical Engineering 28: 96–104. doi:https://doi.org/10.1016/j.coche.2020.03.001.
- Bobbio, L. D., R. A. Otis, J. P. Borgonia, R. P. Dillon, A. A. Shapiro, Z. K. Liu, and A. M. Beese. 2017. “Additive Manufacturing of a Functionally Graded Material from Ti-6Al-4V to Invar: Experimental Characterization and Thermodynamic Calculations.” Acta Materialia 127: 133–142. doi:https://doi.org/10.1016/j.actamat.2016.12.070.
- Bodner, S. C., L. T. G. van de Vorst, J. Zalesak, J. Todt, J. F. Keckes, V. Maier-Kiener, B. Sartory, et al. 2020. “Inconel-steel Multilayers by Liquid Dispersed Metal Powder bed Fusion: Microstructure, Residual Stress and Property Gradients.” Addit. Manuf 32: 101027. doi:https://doi.org/10.1016/j.addma.2019.101027.
- Bonaiti, G., P. Parenti, M. Annoni, and S. Kapoor. 2017. “Micro-milling Machinability of DED Additive Titanium Ti-6Al-4V.” Procedia Manufacturing 10: 497–509. doi:https://doi.org/10.1016/j.promfg.2017.07.104.
- Buciumeanu, M., A. Bagheri, N. Shamsaei, S. M. Thompson, F. S. Silva, and B. Henriques. 2018. “Tribocorrosion Behavior of Additive Manufactured Ti-6Al-4V Biomedical Alloy.” Tribology International 119: 381–388. doi:https://doi.org/10.1016/j.triboint.2017.11.032.
- Campo, K. N., L. C. Campanelli, L. Bergmann, J. F. dos Santos, and C. Bolfarini. 2014. “Microstructure and Interface Characterization of Dissimilar Friction Stir Welded lap Joints Between Ti-6Al-4V and AISI 304.” Materials & Design (1980-2015) 56: 139–145. doi:https://doi.org/10.1016/j.matdes.2013.11.002.
- Carroll, B. E., R. A. Otis, J. P. Borgonia, J. O. Suh, R. P. Dillon, A. A. Shapiro, D. C. Hofmann, Z. K. Liu, and A. M. Beese. 2016. “Functionally Graded Material of 304L Stainless Steel and Inconel 625 Fabricated by Directed Energy Deposition: Characterization and Thermodynamic Modeling.” Acta Materialia 108: 46–54. doi:https://doi.org/10.1016/j.actamat.2016.02.019.
- Carvalho, G. H. S. F. L., I. Galvão, R. Mendes, R. M. Leal, and A. Loureiro. 2020. “Explosive Welding of Aluminium to Stainless Steel Using Carbon Steel and Niobium Interlayers.” Journal of Materials Processing Technology 283: 116707. doi:https://doi.org/10.1016/j.jmatprotec.2020.116707.
- Casalino, G., S. D’Ostuni, P. Guglielmi, P. Leo, M. Mortello, G. Palumbo, and A. Piccininni. 2017. “Mechanical and Microstructure Analysis of AA6061 and Ti6Al4V Fiber Laser Butt Weld.” Optik 148: 151–156. doi:https://doi.org/10.1016/j.ijleo.2017.08.138.
- Chen, X., D. Inao, S. Tanaka, A. Mori, X. Li, and K. Hokamoto. 2020. “Explosive Welding of Al Alloys and High Strength Duplex Stainless Steel by Controlling Energetic Conditions.” Journal of Manufacturing Processes 58: 1318–1333. doi:https://doi.org/10.1016/j.jmapro.2020.09.037.
- Chen, H. C., A. J. Pinkerton, and L. Li. 2011. “Fibre Laser Welding of Dissimilar Alloys of Ti-6Al-4V and Inconel 718 for Aerospace Applications.” The International Journal of Advanced Manufacturing Technology 52: 977–987. doi:https://doi.org/10.1007/s00170-010-2791-3.
- Chen, L., C. Wang, X. Zhang, and G. Mi. 2021. “Effect of Parameters on Microstructure and Mechanical Property of Dissimilar Joints Between 316L Stainless Steel and GH909 Alloy by Laser Welding.” Journal of Manufacturing Processes 65: 60–69. doi:https://doi.org/10.1016/j.jmapro.2021.03.015.
- Chen, J., Y. Yang, C. Song, D. Wang, S. Wu, and M. Zhang. 2020. “Influence Mechanism of Process Parameters on the Interfacial Characterization of Selective Laser Melting 316L/CuSn10.” Materials Science and Engineering: A 792: 139316. doi:https://doi.org/10.1016/j.msea.2020.139316.
- Chen, J., Y. Yang, C. Song, M. Zhang, S. Wu, and D. Wang. 2019. “Interfacial Microstructure and Mechanical Properties of 316L /CuSn10 Multi-Material Bimetallic Structure Fabricated by Selective Laser Melting.” Materials Science and Engineering: A 752: 75–85. doi:https://doi.org/10.1016/j.msea.2019.02.097.
- Chen, S., M. Zhang, J. Huang, C. Cui, H. Zhang, and X. Zhao. 2014. “Microstructures and Mechanical Property of Laser Butt Welding of Titanium Alloy to Stainless Steel.” Materials & Design 53: 504–511. doi:https://doi.org/10.1016/j.matdes.2013.07.044.
- Collins, P. C., R. Banerjee, S. Banerjee, and H. L. Fraser. 2003. “Laser Deposition of Compositionally Graded Titanium-Vanadium and Titanium-Molybdenum Alloys.” Materials Science and Engineering: A 352: 118–128. doi:https://doi.org/10.1016/S0921-5093(02)00909-7.
- Das, M., K. Bhattacharya, S. A. Dittrick, C. Mandal, V. K. Balla, T. S. Sampath Kumar, A. Bandyopadhyay, and I. Manna. 2014. “In situ Synthesized TiB-TiN Reinforced Ti6Al4V Alloy Composite Coatings: Microstructure, Tribological and in-Vitro Biocompatibility.” Journal of the Mechanical Behavior of Biomedical Materials 29: 259–271. doi:https://doi.org/10.1016/j.jmbbm.2013.09.006.
- Demir, A. G., and B. Previtali. 2017. “Multi-material Selective Laser Melting of Fe/Al-12Si Components.” Manufacturing Letters 11: 8–11. doi:https://doi.org/10.1016/j.mfglet.2017.01.002.
- Denti, L., E. Bassoli, A. Gatto, E. Santecchia, and P. Mengucci. 2019. “Fatigue Life and Microstructure of Additive Manufactured Ti6Al4V After Different Finishing Processes.” Materials Science and Engineering: A 755: 1–9. doi:https://doi.org/10.1016/j.msea.2019.03.119.
- Dharmendra, C., S. Shakerin, G. D. J. Ram, and M. Mohammadi. 2020. “Wire-arc Additive Manufacturing of Nickel Aluminum Bronze/Stainless Steel Hybrid Parts – Interfacial Characterization, Prospects, and Problems.” Materialia 13: 100834. doi:https://doi.org/10.1016/j.mtla.2020.100834.
- Dhinakaran, V., J. Ajith, A. Fathima, Yasin Fahmidha, T. Jagadeesha, T. Sathish, and B. Stalin. 2020. “Wire Arc Additive Manufacturing (WAAM) Process of Nickel Based Superalloys – A Review.” Materials Today: Proceedings 21: 920–925.
- Ding, D., Z. Pan, D. Cuiuri, and H. Li. 2015. “Wire-feed Additive Manufacturing of Metal Components: Technologies, Developments and Future Interests.” The International Journal of Advanced Manufacturing Technology 81: 465–481.
- Domack, M. S., and J. M. Baughman. 2005. “Development of Nickel-Titanium Graded Composition Components.” Rapid Prototyping Journal 11: 41–51. doi:https://doi.org/10.1108/13552540510573383.
- Du, W., Q. Bai, and B. Zhang. 2016. “A Novel Method for Additive/Subtractive Hybrid Manufacturing of Metallic Parts.” Procedia Manufacturing 5: 1018–1030. doi:https://doi.org/10.1016/j.promfg.2016.08.067.
- Elrefaey, A., and W. Tillmann. 2009. “Solid State Diffusion Bonding of Titanium to Steel Using a Copper Base Alloy as Interlayer.” Journal of Materials Processing Technology 209: 2746–2752. doi:https://doi.org/10.1016/j.jmatprotec.2008.06.014.
- España, F. A., V. K. Balla, S. Bose, and A. Bandyopadhyay. 2010. “Design and Fabrication of CoCrMo Alloy Based Novel Structures for Load Bearing Implants Using Laser Engineered net Shaping.” Materials Science and Engineering: C 30: 50–57. doi:https://doi.org/10.1016/j.msec.2009.08.006.
- Fallahi, A. A., A. Shokuhfar, A. Ostovari Moghaddam, and A. Abdolahzadeh. 2017. “Analysis of SiC Nano-Powder Effects on Friction Stir Welding of Dissimilar Al-Mg Alloy to A316L Stainless Steel.” Journal of Manufacturing Processes 30: 418–430. doi:https://doi.org/10.1016/j.jmapro.2017.09.027.
- Flynn, J. M., A. Shokrani, S. T. Newman, and V. Dhokia. 2016. “Hybrid Additive and Subtractive Machine Tools – Research and Industrial Developments.” International Journal of Machine Tools and Manufacture 101: 79–101. doi:https://doi.org/10.1016/j.ijmachtools.2015.11.007.
- Frazier, W. E. 2014. “Metal Additive Manufacturing: A Review.” Journal of Materials Engineering and Performance 23: 1917–1928. doi:https://doi.org/10.1007/s11665-014-0958-z.
- Gradl, P. R., and C. S. Protz. 2020. “Technology Advancements for Channel Wall Nozzle Manufacturing in Liquid Rocket Engines.” Acta Astronautica 174: 148–158. doi:https://doi.org/10.1016/j.actaastro.2020.04.067.
- Groden, C., K. D. Traxel, A. Afrouzian, E. Nyberg, and A. Bandyopadhyay. 2022. “Inconel 718-W7Ni3Fe Bimetallic Structures Using Directed Energy Deposition-Based Additive Manufacturing.” Virtual and Physical Prototyping, doi:https://doi.org/10.1080/17452759.2022.2025673.
- Guo, Z., M. Liu, X. Bian, M. Liu, and J. Li. 2019. “An Al-7Si Alloy/Cast Iron Bimetallic Composite with Super-High Shear Strength.” Journal of Materials Research and Technology 8: 3126–3136. doi:https://doi.org/10.1016/j.jmrt.2017.06.014.
- Guo, X., W. Wei, Y. Xu, A. Abd El-Aty, H. Liu, H. Wang, X. Luo, and J. Tao. 2019. “Wall Thickness Distribution of Cu–Al Bimetallic Tube Based on Free Bending Process.” International Journal of Mechanical Sciences 150: 12–19. doi:https://doi.org/10.1016/j.ijmecsci.2018.10.013.
- Hadadzadeh, A., B. S. Amirkhiz, S. Shakerin, J. Kelly, J. Li, and M. Mohammadi. 2020. “Microstructural Investigation and Mechanical Behavior of a two-Material Component Fabricated Through Selective Laser Melting of AlSi10Mg on an Al-Cu-Ni-Fe-Mg Cast Alloy Substrate.” Addit. Manuf 31: 100937. doi:https://doi.org/10.1016/j.addma.2019.100937.
- Hasanov, S., S. Alkunte, M. Rajeshirke, A. Gupta, O. Huseynov, I. Fidan, F. Alifui-Segbaya, and A. Rennie. 2022. “Review on Additive Manufacturing of Multi-Material Parts: Progress and Challenges.” J. Manuf. Mater. Process 6: 4. doi:https://doi.org/10.3390/jmmp6010004.
- Heer, B., and A. Bandyopadhyay. 2018. “Compositionally Graded Magnetic-Nonmagnetic Bimetallic Structure Using Laser Engineered net Shaping.” Materials Letters 216: 16–19. doi:https://doi.org/10.1016/j.matlet.2017.12.129.
- Hofmann, D. C., J. Kolodziejska, S. Roberts, R. Otis, R. P. Dillon, J. O. Suh, Z. K. Liu, and J. P. Borgonia. 2014. “Compositionally Graded Metals: A New Frontier of Additive Manufacturing.” Journal of Materials Research 29: 1899–1910. doi:https://doi.org/10.1557/jmr.2014.208.
- Hofmann, D. C., S. Roberts, R. Otis, J. Kolodziejska, R. P. Dillon, J. Suh, A. A. Shapiro, Z.-K. Liu, and J.-P. Borgonia. 2015. “Developing Gradient Metal Alloys Through Radial Deposition Additive Manufacturing.” Scientific Reports 4: 5357. doi:https://doi.org/10.1038/srep05357.
- Huang, Y., M. C. Leu, J. Mazumder, and A. Donmez. 2015. “Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations.” Journal of Manufacturing Science and Engineering 137: 1–11. doi:https://doi.org/10.1115/1.4028725.
- Hume-Rothery, W. 1966. “Atomic Diameters, Atomic Volumes and Solid Solubility Relations in Alloys.” Acta Metallurgica 14: 17–20. doi:https://doi.org/10.1016/0001-6160(66)90267-7.
- Imran, M. K., S. H. Masood, M. Brandt, S. Bhattacharya, and J. Mazumder. 2011. “Direct Metal Deposition (DMD) of H13 Tool Steel on Copper Alloy Substrate: Evaluation of Mechanical Properties.” Materials Science and Engineering: A 528: 3342–3349. doi:https://doi.org/10.1016/j.msea.2010.12.099.
- Ji, S., Z. Sun, W. Zhang, X. Chen, G. Xie, and H. Chang. 2020. “Microstructural Evolution and High Temperature Resistance of Functionally Graded Material Ti-6Al-4V/Inconel 718 Coated by Directed Energy Deposition-Laser.” Journal of Alloys and Compounds 848: 156255. doi:https://doi.org/10.1016/j.jallcom.2020.156255.
- Jiménez, A., P. Bidare, H. Hassanin, F. Tarlochan, S. Dimov, and K. Essa. 2021. “Powder-based Laser Hybrid Additive Manufacturing of Metals: A Review.” The International Journal of Advanced Manufacturing Technology 114: 63–96.
- Jiménez Mena, N., T. Sapanathan, P. J. Jacques, and A. Simar. 2021. “Combined Numerical and Experimental Estimation of the Fracture Toughness and Failure Analysis of Single lap Shear Test for Dissimilar Welds.” Engineering Fracture Mechanics 249: 107756. doi:https://doi.org/10.1016/j.engfracmech.2021.107756.
- Ju, J., Y. Zhou, K. Wang, Y. Liu, J. Li, M. Kang, and J. Wang. 2020. “Tribological Investigation of Additive Manufacturing Medical Ti6Al4V Alloys Against Al2O3 Ceramic Balls in Artificial Saliva.” Journal of the Mechanical Behavior of Biomedical Materials 104: 103602. doi:https://doi.org/10.1016/j.jmbbm.2019.103602.
- Karunakaran, K. P., S. Suryakumar, V. Pushpa, and S. Akula. 2010. “Low Cost Integration of Additive and Subtractive Processes for Hybrid Layered Manufacturing.” Robotics and Computer-Integrated Manufacturing 26: 490–499. doi:https://doi.org/10.1016/j.rcim.2010.03.008.
- Kasperovich, G., and J. Hausmann. 2015. “Improvement of Fatigue Resistance and Ductility of TiAl6V4 Processed by Selective Laser Melting.” Journal of Materials Processing Technology 220: 202–214. doi:https://doi.org/10.1016/j.jmatprotec.2015.01.025.
- Kelly, J. P., J. W. Elmer, F. J. Ryerson, J. R. I. Lee, and J. J. Haslam. 2021. “Directed Energy Deposition Additive Manufacturing of Functionally Graded Al-W Composites.” Addit. Manuf 39: 101845. doi:https://doi.org/10.1016/j.addma.2021.101845.
- Kotecki, D. J., and J. C. Lippold. 2005. Welding Metallurgy and Weldability of Stainless Steels. Hoboken, NJ: John Wiley.
- Kundu, S., and S. Chatterjee. 2006. “Interfacial Microstructure and Mechanical Properties of Diffusion-Bonded Titanium-Stainless Steel Joints Using a Nickel Interlayer.” Materials Science and Engineering: A 425: 107–113. doi:https://doi.org/10.1016/j.msea.2006.03.034.
- Kundu, S., and S. Chatterjee. 2010. “Evolution of Interface Microstructure and Mechanical Properties of Titanium/304 Stainless Steel Diffusion Bonded Joint Using Nb Interlayer.” ISIJ International 50: 1460–1465. doi:https://doi.org/10.2355/isijinternational.50.1460.
- Kundu, S., S. Chatterjee, D. Olson, and B. Mishra. 2007. “Effects of Intermetallic Phases on the Bond Strength of Diffusion-Bonded Joints Between Titanium and 304 Stainless Steel Using Nickel Interlayer.” Metallurgical and Materials Transactions A 38: 2053–2060. doi:https://doi.org/10.1007/s11661-007-9273-8.
- Kundu, S., M. Ghosh, A. Laik, K. Bhanumurthy, G. B. Kale, and S. Chatterjee. 2005. “Diffusion Bonding of Commercially Pure Titanium to 304 Stainless Steel Using Copper Interlayer.” Materials Science and Engineering: A 407: 154–160. doi:https://doi.org/10.1016/j.msea.2005.07.010.
- Kundu, S., S. Sam, and S. Chatterjee. 2011. “Interface Microstructure and Strength Properties of Ti-6Al-4V and Microduplex Stainless Steel Diffusion Bonded Joints.” Materials & Design 32: 2997–3003. doi:https://doi.org/10.1016/j.matdes.2010.12.052.
- Lee, J. G., S. J. Hong, M. K. Lee, and C. K. Rhee. 2009. “High Strength Bonding of Titanium to Stainless Steel Using an Ag Interlayer.” Journal of Nuclear Materials 395: 145–149. doi:https://doi.org/10.1016/j.jnucmat.2009.10.045.
- Li, P., Y. Gong, Y. Xu, Y. Qi, Y. Sun, and H. Zhang. 2019. “Inconel-steel Functionally Bimetal Materials by Hybrid Directed Energy Deposition and Thermal Milling: Microstructure and Mechanical Properties.” Archives of Civil and Mechanical Engineering 19: 820–831. doi:https://doi.org/10.1016/j.acme.2019.03.002.
- Li, S., L. Hu, P. Dai, T. Bi, and D. Deng. 2021. “Influence of the Groove Shape on Welding Residual Stresses in P92/SUS304 Dissimilar Metal Butt-Welded Joints.” Journal of Manufacturing Processes 66: 376–386. doi:https://doi.org/10.1016/j.jmapro.2021.04.030.
- Li, P., J. Li, J. Xiong, F. Zhang, and S. H. Raza. 2012. “Diffusion Bonding Titanium to Stainless Steel Using Nb/Cu/Ni Multi-Interlayer.” Materials Characterization 68: 82–87. doi:https://doi.org/10.1016/j.matchar.2012.03.016.
- Lin, T. C., C. Cao, M. Sokoluk, L. Jiang, X. Wang, J. M. Schoenung, E. J. Lavernia, and X. Li. 2019. “Aluminum with Dispersed Nanoparticles by Laser Additive Manufacturing.” Nature Communications 10: 4124. doi:https://doi.org/10.1038/s41467-019-12047-2.
- Linse, V. D., and H. E. Pattee. 1976. “Development of Explosive Welding Procedures to Fabricate Channeled Nozzle Structures.
- Liou, F., K. Slattery, M. Kinsella, J. Newkirk, H. N. Chou, and R. Landers. 2007. “Applications of a Hybrid Manufacturing Process for Fabrication of Metallic Structures.” Rapid Prototyping Journal 13: 236–244. doi:https://doi.org/10.1108/13552540710776188.
- Liu, S., K. M. Hong, C. Katinas, and Y. C. Shin. 2019. “Multiphysics Modeling of Phase Transformation and Microhardness Evolution in Laser Direct Deposited Ti6Al4V.” Journal of Manufacturing Processes 45: 579–587. doi:https://doi.org/10.1016/j.jmapro.2019.07.027.
- Liu, L., Y. F. Jia, and F. Z. Xuan. 2017. “Gradient Effect in the Waved Interfacial Layer of 304L/533B Bimetallic Plates Induced by Explosive Welding.” Materials Science and Engineering: A 704: 493–502. doi:https://doi.org/10.1016/j.msea.2017.08.012.
- Liu, Z., R. Ma, G. Xu, W. Wang, and J. Liu. 2020. “Laser Additive Manufacturing of Bimetallic Structure from Ti-6Al-4V to Ti-48Al-2Cr-2Nb via Vanadium Interlayer.” Materials Letters 263: 127210. doi:https://doi.org/10.1016/j.matlet.2019.127210.
- Liu, Z. H., D. Q. Zhang, S. L. Sing, C. K. Chua, and L. E. Loh. 2014. “Interfacial Characterization of SLM Parts in Multi-Material Processing: Metallurgical Diffusion Between 316L Stainless Steel and C18400 Copper Alloy.” Materials Characterization 94: 116–125. doi:https://doi.org/10.1016/j.matchar.2014.05.001.
- Loh, G. H., E. Pei, D. Harrison, and M. D. Monzón. 2018. “An Overview of Functionally Graded Additive Manufacturing.” Addit. Manuf 23: 34–44. doi:https://doi.org/10.1016/j.addma.2018.06.023.
- Mahmood, Y., P. wan Chen, I. A. Bataev, and X. Gao. 2020. “Experimental and Numerical Investigations of Interface Properties of Ti6Al4V/CP-Ti/Copper Composite Plate Prepared by Explosive Welding.” Def. Technol, doi:https://doi.org/10.1016/j.dt.2020.09.003.
- Martinez, R., I. Todd, and K. Mumtaz. 2019. “In situ alloying of Elemental Al-Cu12 Feedstock Using Selective Laser Melting.” Virtual and Physical Prototyping 14 (3): 242–252.
- Mastanaiah, P., G. Madhusudhan Reddy, K. Satya Prasad, and C. V. S. Murthy. 2014. “An Investigation on Microstructures and Mechanical Properties of Explosive Cladded C103 Niobium Alloy Over C263 Nimonic Alloy.” Journal of Materials Processing Technology 214: 2316–2324. doi:https://doi.org/10.1016/j.jmatprotec.2014.04.025.
- Mei, X., X. Wang, Y. Peng, H. Gu, G. Zhong, and S. Yang. 2019. “Interfacial Characterization and Mechanical Properties of 316L Stainless Steel/Inconel 718 Manufactured by Selective Laser Melting.” Materials Science and Engineering: A 758: 185–191. doi:https://doi.org/10.1016/j.msea.2019.05.011.
- Mertens, A., S. Reginster, H. Paydas, Q. Contrepois, T. Dormal, O. Lemaire, and J. Lecomte-Beckers. 2014. “Mechanical Properties of Alloy Ti-6Al-4V and of Stainless Steel 316L Processed by Selective Laser Melting: Influence of out-of-Equilibrium Microstructures.” Powder Metallurgy 57: 184–189. doi:https://doi.org/10.0.4.155/1743290114Y.0000000092.
- Mishra, S., T. J. Lienert, M. Q. Johnson, and T. DebRoy. 2008. “An Experimental and Theoretical Study of gas Tungsten arc Welding of Stainless Steel Plates with Different Sulfur Concentrations.” Acta Materialia 56: 2133–2146. doi:https://doi.org/10.1016/j.actamat.2008.01.028.
- Mitra, I., S. Bose, W. S. Dernell, N. Dasgupta, C. Eckstrand, J. Herrick, M. J. Yaszemski, S. B. Goodman, and A. Bandyopadhyay. 2021. “3D Printing in Alloy Design to Improve Biocompatibility in Metallic Implants.” Mater. Today, doi:https://doi.org/10.1016/j.mattod.2020.11.021.
- Naik, S. R., G. M. Gadad, and A. M. Hebbale. 2021. “Joining of Dissimilar Metals Using Microwave Hybrid Heating and Tungsten Inert Gas Welding - A Review.” Mater. Today Proc, doi:https://doi.org/10.1016/j.matpr.2021.02.322.
- Nandan, R., T. DebRoy, and H. K. D. H. Bhadeshia. 2008. “Recent Advances in Friction-Stir Welding - Process, Weldment Structure and Properties.” Progress in Materials Science 53: 980–1023. doi:https://doi.org/10.1016/j.pmatsci.2008.05.001.
- Ngo, T. D., A. Kashani, G. Imbalzano, K. T. Q. Nguyen, and D. Hui. 2018. “Additive Manufacturing (3D Printing): A Review of Materials, Methods, Applications and Challenges.” Composites Part B: Engineering 143: 172–196. doi:https://doi.org/10.1016/j.compositesb.2018.02.012.
- Ning, J., L. J. Zhang, G. chuan Jiang, M. xia Xie, X. qing Yin, and J. xun Zhang. 2017. “Narrow gap Multi-Pass Laser Butt Welding of Explosion Welded CP-Ti/Q235B Bimetallic Sheet by Using a Copper Interlayer.” Journal of Alloys and Compounds 701: 587–602. doi:https://doi.org/10.1016/j.jallcom.2017.01.129.
- Onuike, B., and A. Bandyopadhyay. 2018. “Additive Manufacturing of Inconel 718 – Ti6Al4V Bimetallic Structures.” Addit. Manuf 22: 844–851. doi:https://doi.org/10.1016/j.addma.2018.06.025.
- Onuike, B., and A. Bandyopadhyay. 2019. “Bond Strength Measurement for Additively Manufactured Inconel 718- GRCop84 Copper Alloy Bimetallic Joints.” Addit. Manuf 27: 576–585. doi:https://doi.org/10.1016/j.addma.2019.04.003.
- Onuike, B., and A. Bandyopadhyay. 2020. “Functional Bimetallic Joints of Ti6Al4V to SS410.” Addit. Manuf 31: 100931. doi:https://doi.org/10.1016/j.addma.2019.100931.
- Onuike, B., B. Heer, and A. Bandyopadhyay. 2018. “Additive Manufacturing of Inconel 718—Copper Alloy Bimetallic Structure Using Laser Engineered net Shaping (LENSTM).” Addit. Manuf 21: 133–140. doi:https://doi.org/10.1016/j.addma.2018.02.007.
- Orhan, N., T. I. Khan, and M. Eroǧlu. 2001. “Diffusion Bonding of a Microduplex Stainless Steel to Ti-6Al-4V.” Scripta Materialia 45: 441–446. doi:https://doi.org/10.1016/S1359-6462(01)01041-7.
- Otto, F., Y. Yang, H. Bei, and E. P. George. 2013. “Relative Effects of Enthalpy and Entropy on the Phase Stability of Equiatomic High-Entropy Alloys.” Acta Materialia 61: 2628–2638. doi:https://doi.org/10.1016/j.actamat.2013.01.042.
- Park, J. W., P. F. Mendez, and T. W. Eagar. 2002. “Strain Energy Distribution in Ceramic-to-Metal Joints.” Acta Materialia 50: 883–899. doi:https://doi.org/10.1016/S1359-6454(01)00352-4.
- Pouranvari, M., A. Ekrami, and A. H. Kokabi. 2013. “Effect of the Bonding Time on the Microstructure and Mechanical Properties of a Transient-Liquid-Phase Bonded in718 Using a Ni-Cr-B Filler Alloy.” Mater. Tehnol 47: 593–599.
- Prashanth, K. G., S. Scudino, T. Maity, J. Das, and J. Eckert. 2017. “Is the Energy Density a Reliable Parameter for Materials Synthesis by Selective Laser Melting?” Materials Research Letters 5: 386–390. doi:https://doi.org/10.1080/21663831.2017.1299808.
- Qin, S., T. C. Novak, M. K. Vailhe, Z. K. Liu, and A. M. Beese. 2021. “Plasticity and Fracture Behavior of Inconel 625 Manufactured by Laser Powder bed Fusion: Comparison Between as-Built and Stress Relieved Conditions.” Materials Science and Engineering: A 806: 140808. doi:https://doi.org/10.1016/j.msea.2021.140808.
- Rai, R., A. De, H. K. D. H. Bhadeshia, and T. DebRoy. 2011. “Review: Friction Stir Welding Tools.” Science and Technology of Welding and Joining 16: 325–342. doi:https://doi.org/10.0.4.155/1362171811Y.0000000023.
- Reichardt, A., R. P. Dillon, J. P. Borgonia, A. A. Shapiro, B. W. McEnerney, T. Momose, and P. Hosemann. 2016. “Development and Characterization of Ti-6Al-4V to 304L Stainless Steel Gradient Components Fabricated with Laser Deposition Additive Manufacturing.” Materials & Design 104: 404–413. doi:https://doi.org/10.1016/j.matdes.2016.05.016.
- Reichardt, A., A. A. Shapiro, R. Otis, R. P. Dillon, J. P. Borgonia, B. W. McEnerney, P. Hosemann, and A. M. Beese. 2021. “Advances in Additive Manufacturing of Metal-Based Functionally Graded Materials.” International Materials Reviews 66: 1–29. doi:https://doi.org/10.1080/09506608.2019.1709354.
- Riccius, J. R., E. B. Zametaev, R. H. Stark, and R. Schwane. 2018. FSI analysis code validation motivated geometrical scaling of rocket engine nozzles and influence to natural frequency, in: 2018 Jt. Propuls. Conf., American Institute of Aeronautics and Astronautics. doi:https://doi.org/10.2514/6.2018-4860.
- Rosli, N. A., M. R. Alkahari, M. F. Abdollah, S. Maidin, and F. R. Ramli. 2021. “Review on Effect of Heat Input for Wire arc Additive Manufacturing Process.” Journal of Materials Research and Technology 11: 2127–2145. doi:https://doi.org/10.1016/j.jmrt.2021.02.002.
- Sahasrabudhe, H., R. Harrison, C. Carpenter, and A. Bandyopadhyay. 2015. “Stainless Steel to Titanium Bimetallic Structure Using LENSTM.” Addit. Manuf 5: 1–8. doi:https://doi.org/10.1016/j.addma.2014.10.002.
- Schmelzle, J., E. V. Kline, C. J. Dickman, E. W. Reutzel, G. Jones, and T. W. Simpson. 2015. “(Re)Designing for Part Consolidation: Understanding the Challenges of Metal Additive Manufacturing.” Journal of Mechanical Design 137: 1–12. doi:https://doi.org/10.1115/1.4031156.
- Schneider-Maunoury, C., L. Weiss, D. Boisselier, and P. Laheurte. 2018. “Crystallographic analysis of functionally graded titanium-molybdenum alloys with DED-CLAD® process.” Procedia CIRP, Elsevier B.V., 180–183. doi:https://doi.org/10.1016/j.procir.2018.08.089.
- Shah, K., I. U. Haq, S. A. Shah, F. U. Khan, M. T. Khan, and S. Khan. 2014. “Experimental Study of Direct Laser Deposition of ti-6al-4v and Inconel 718 by Using Pulsed Parameters.” Sci. World J 2014: 841546–841549. doi:https://doi.org/10.1155/2014/841549.
- Shakerin, S., M. Sanjari, B. S. Amirkhiz, and M. Mohammadi. 2020. “Interface Engineering of Additively Manufactured Maraging Steel-H13 Bimetallic Structures.” Materials Characterization 170: 110728. doi:https://doi.org/10.1016/j.matchar.2020.110728.
- Shang, C., C. Wang, C. Li, G. Yang, G. Xu, and J. You. 2020. “Eliminating the Crack of Laser 3D Printed Functionally Graded Material from TA15 to Inconel718 by Base Preheating.” Optics & Laser Technology 126: 106100. doi:https://doi.org/10.1016/j.optlastec.2020.106100.
- Shang, C., C. Wang, G. Xu, C. Li, and J. You. 2019. “Laser Additive Manufacturing of TA15 - Inconel 718 Bimetallic Structure via Nb/Cu Multi-Interlayer.” Vacuum 169: 108888. doi:https://doi.org/10.1016/j.vacuum.2019.108888.
- Shiue, R. K., S. K. Wu, and J. Y. Shiue. 2008. “Infrared Brazing of Ti-6Al-4V and 17-4 PH Stainless Steel with (Ni)/Cr Barrier Layer(s).” Materials Science and Engineering: A 488: 186–194. doi:https://doi.org/10.1016/j.msea.2007.10.075.
- Simchi, A. 2006. “Direct Laser Sintering of Metal Powders: Mechanism, Kinetics and Microstructural Features.” Materials Science and Engineering: A 428: 148–158. doi:https://doi.org/10.1016/j.msea.2006.04.117.
- Simonelli, M., Y. Y. Tse, and C. Tuck. 2014. “On the Texture Formation of Selective Laser Melted Ti-6Al-4V.” Metallurgical and Materials Transactions A 45: 2863–2872. doi:https://doi.org/10.1007/s11661-014-2218-0.
- Sing, S. L., S. Huang, G. D. Goh, G. L. Goh, C. F. Tey, J. H. L. Tan, and W. Y. Yeong. 2021. “Emerging Metallic Systems for Additive Manufacturing: In-situ Alloying and Multi-Metal Processing in Laser Powder bed Fusion.” Progress in Materials Science 119: 100795.
- Sing, S. L., L. P. Lam, D. Q. Zhang, Z. H. Liu, and C. K. Chua. 2015. “Interfacial Characterization of SLM Parts in Multi-Material Processing: Intermetallic Phase Formation Between AlSi10Mg and C18400 Copper Alloy.” Materials Characterization 107: 220–227. doi:https://doi.org/10.1016/j.matchar.2015.07.007.
- Singh, P., D. Deepak, and G. S. Brar. 2021. “Optical Micrograph and Micro-Hardness Behavior of Dissimilar Welded Joints of Aluminum (Al 6061-T6) and Stainless Steel (SS 304) with Friction Crush Welding.” Materials Today: Proceedings 44: 1000–1004. doi:https://doi.org/10.1016/j.matpr.2020.11.171.
- Sireesha, M., S. K. Albert, V. Shankar, and S. Sundaresan. 2000. “A Comparative Evaluation of Welding Consumables for Dissimilar Welds Between 316LN Austenitic Stainless Steel and Alloy 800.” Journal of Nuclear Materials 279: 65–76. doi:https://doi.org/10.1016/S0022-3115(99)00275-5.
- Song, B., S. Dong, P. Coddet, H. Liao, and C. Coddet. 2012. “Fabrication and Microstructure Characterization of Selective Laser-Melted FeAl Intermetallic Parts.” Surface and Coatings Technology 206: 4704–4709. doi:https://doi.org/10.1016/j.surfcoat.2012.05.072.
- Song, J., and B. Sun. 2017. “Thermal-structural Analysis of Regeneratively-Cooled Thrust Chamber Wall in Reusable LOX/Methane Ocket Engines.” Chinese Journal of Aeronautics 30: 1043–1053. doi:https://doi.org/10.1016/j.cja.2017.04.007.
- Sun, Z., Y.-H. Chueh, and L. Li. 2020. “Multiphase Mesoscopic Simulation of Multiple and Functionally Gradient Materials Laser Powder bed Fusion Additive Manufacturing Processes.” Addt Manuf 35: 101448.
- Tammas-Williams, S., I. Todd, R. M. Mahamood, E. T. Akinlabi, S. Tammas-Williams, and I. Todd. 2017. Functionally Graded Materials. Cham: Springer International Publishing AG, Cham. doi:https://doi.org/10.1201/9781315151441.
- Tan, X., Y. Kok, Y. J. Tan, M. Descoins, D. Mangelinck, S. B. Tor, K. F. Leong, and C. K. Chua. 2015. “Graded Microstructure and Mechanical Properties of Additive Manufactured Ti–6Al–4V via Electron Beam Melting.” Acta Materialia 97: 1–16. doi:https://doi.org/10.1016/j.actamat.2015.06.036.
- Tan, X., Y. Kok, Y. J. Tan, G. Vastola, Q. X. Pei, G. Zhang, Y. W. Zhang, S. B. Tor, K. F. Leong, and C. K. Chua. 2015. “An Experimental and Simulation Study on Build Thickness Dependent Microstructure for Electron Beam Melted Ti-6Al-4V.” Journal of Alloys and Compounds 646: 303–309. doi:https://doi.org/10.1016/j.jallcom.2015.05.178.
- Tan, C., K. Zhou, and T. Kuang. 2019. “Selective Laser Melting of Tungsten-Copper Functionally Graded Material.” Materials Letters 237: 328–331.
- Tanvir, A. N. M., M. R. U. Ahsan, C. Ji, W. Hawkins, B. Bates, and D. B. Kim. 2019. “Heat Treatment Effects on Inconel 625 Components Fabricated by Wire + arc Additive Manufacturing (WAAM)—Part 1: Microstructural Characterization.” The International Journal of Advanced Manufacturing Technology 103: 3785–3798. doi:https://doi.org/10.1007/s00170-019-03828-6.
- Tey, C. F., X. Tan, S. L. Sing, and W. Y. Yeong. 2020. “Additive Manufacturing of Multiple Materials by Selective Laser Melting: Ti-Alloy to Stainless Steel via a Cu-Alloy Interlayer.” Additive Manufacturing 31: 100970.
- The Materials Information Society. 1992. ASM Handbook Volume 3 - Alloy Phase Diagrams, ASM International. doi:https://doi.org/10.1007/BF02869318.
- Thermal Diffusivity/Conductivity, Seebeck Coefficient/Electrical Conductivity and Time Domain Thermoreflectance. n.d. Accessed April 26, 2021. https://www.netzsch-thermal-analysis.com/en/products-solutions/thermal-diffusivity-conductivity/.
- Thompson, M. K., G. Moroni, T. Vaneker, G. Fadel, R. I. Campbell, I. Gibson, A. Bernard, et al. 2016. “Design for Additive Manufacturing: Trends, Opportunities, Considerations, and Constraints.” CIRP Annals 65: 737–760. doi:https://doi.org/10.1016/j.cirp.2016.05.004.
- Tomashchuk, I., P. Sallamand, N. Belyavina, and M. Pilloz. 2013. “Evolution of Microstructures and Mechanical Properties During Dissimilar Electron Beam Welding of Titanium Alloy to Stainless Steel via Copper Interlayer.” Materials Science and Engineering: A 585: 114–122. doi:https://doi.org/10.1016/j.msea.2013.07.050.
- Torkamany, M. J., F. Malek Ghaini, and R. Poursalehi. 2014. “Dissimilar Pulsed Nd:Yag laser Welding of Pure Niobium to Ti–6Al–4V.” Materials & Design 53: 915–920. doi:https://doi.org/10.1016/j.matdes.2013.07.094.
- Traxel, K. D., and A. Bandyopadhyay. 2020. “Influence of in situ Ceramic Reinforcement Towards Tailoring Titanium Matrix Composites Using Laser-Based Additive Manufacturing.” Addit. Manuf 31: 101004. doi:https://doi.org/10.1016/j.addma.2019.101004.
- Traxel, Kellen D., and Amit Bandyopadhyay. 2021. “Designing High-Temperature Oxidation-Resistant Titanium Matrix Composites via Directed Energy Deposition-Based Additive Manufacturing.” Materials & Design 212), doi:https://doi.org/10.1016/j.matdes.2021.110205.
- Uscinowicz, R. 2013. “Impact of Temperature on Shear Strength of Single lap Al-Cu Bimetallic Joint.” Composites Part B: Engineering 44: 344–356. doi:https://doi.org/10.1016/j.compositesb.2012.04.073.
- Utyaganova, V., A. Filippov, S. Tarasov, N. Shamarin, D. Gurianov, A. Vorontsov, A. Chumaevskii, et al. 2021. “Characterization of AA7075/AA5356 Gradient Transition Zone in an Electron Beam Wire-Feed Additive Manufactured Sample.” Materials Characterization 172: 110867. doi:https://doi.org/10.1016/j.matchar.2020.110867.
- Velu, M., and S. Bhat. 2015. “Experimental Investigations of Fracture and Fatigue Crack Growth of Copper-Steel Joints arc Welded Using Nickel-Base Filler.” Materials & Design 67: 244–260. doi:https://doi.org/10.1016/j.matdes.2014.11.026.
- Vigraman, T., D. Ravindran, and R. Narayanasamy. 2012. “Effect of Phase Transformation and Intermetallic Compounds on the Microstructure and Tensile Strength Properties of Diffusion-Bonded Joints Between Ti-6Al-4V and AISI 304L.” Materials & Design (1980-2015) 36: 714–727. doi:https://doi.org/10.1016/j.matdes.2011.12.024.
- Wang, Z., Y. Huang, Y. Yang, J. Wang, and C. T. Liu. 2015. “Atomic-size Effect and Solid Solubility of Multicomponent Alloys.” Scripta Materialia 94: 28–31. doi:https://doi.org/10.1016/j.scriptamat.2014.09.010.
- Wang, J., Z. Pan, L. Wang, L. Su, K. Carpenter, J. Wang, R. Wang, and H. Li. 2020. “In-situ Dual Wire arc Additive Manufacturing of NiTi-Coating on Ti6Al4V Alloys: Microstructure Characterization and Mechanical Properties.” Surface and Coatings Technology 386: 125439. doi:https://doi.org/10.1016/j.surfcoat.2020.125439.
- Wang, J., W. J. Wu, W. Jing, X. Tan, G. J. Bi, S. B. Tor, K. F. Leong, C. K. Chua, and E. Liu. 2019. “Improvement of Densification and Microstructure of ASTM A131 EH36 Steel Samples Additively Manufactured via Selective Laser Melting with Varying Laser Scanning Speed and Hatch Spacing.” Mater. Sci. Eng. A. Struct. Mater 746: 300–313. doi:https://doi.org/10.1016/j.msea.2019.01.019.
- Wei, C., and L. Li. 2021. “Recent Progress and Scientific Challenges in Multi-Material Additive Manufacturing via Laser-Based Powder Bed Fusion.” Virtual and Physical Prototyping, 1–25.
- Wilson-Heid, A. E., and A. M. Beese. 2021. “Combined Effects of Porosity and Stress State on the Failure Behavior of Laser Powder bed Fusion Stainless Steel 316L.” Addit. Manuf 39: 101862. doi:https://doi.org/10.1016/j.addma.2021.101862.
- Wu, B., Z. Qiu, Z. Pan, K. Carpenter, T. Wang, D. Ding, S. Van Duin, and H. Li. 2020. “Enhanced Interface Strength in Steel-Nickel Bimetallic Component Fabricated Using Wire arc Additive Manufacturing with Interweaving Deposition Strategy.” Journal of Materials Science & Technology 52: 226–234. doi:https://doi.org/10.1016/j.jmst.2020.04.019.
- Xu, N., J. Shen, S. Hu, Y. Tian, and J. Bi. 2021. “Bimetallic Structure of Ti6Al4V and Al6.21Cu Fabricated by Cold Metal Transfer Additive Manufacturing via Nb Interlayer Added by TIG.” Materials Letters 302: 130397. doi:https://doi.org/10.1016/J.MATLET.2021.130397.
- Xu, J., M. Yang, H. Ma, Z. Shen, and Z. Chen. 2020. “Fabrication and Performance Studies on Explosively Welded CuCrZr/316L Bimetallic Plate Applied in Extreme Environments.” Journal of Materials Research and Technology 9: 8971–8984. doi:https://doi.org/10.1016/j.jmrt.2020.05.115.
- Xue, A., X. Lin, L. Wang, J. Wang, and W. Huang. 2019. “Influence of Trace Boron Addition on Microstructure, Tensile Properties and Their Anisotropy of Ti6Al4V Fabricated by Laser Directed Energy Deposition.” Materials & Design 181: 107943. doi:https://doi.org/10.1016/j.matdes.2019.107943.
- Yadroitsev, I., P. Bertrand, and I. Smurov. 2007. “Parametric Analysis of the Selective Laser Melting Process.” Applied Surface Science 253: 8064–8069. doi:https://doi.org/10.1016/j.apsusc.2007.02.088.
- Yan, L., Y. Chen, and F. Liou. 2020. “Additive Manufacturing of Functionally Graded Metallic Materials Using Laser Metal Deposition.” Addit. Manuf 31: 100901. doi:https://doi.org/10.1016/j.addma.2019.100901.
- Yao, L., S. Huang, U. Ramamurty, and Z. M. Xiao. 2021. “On the Formation of “Fish-Scale” Morphology with Curved Grain Interfacial Microstructures During Selective Laser Melting of Dissimilar Alloys.” Acta Materialia 220: 117331.
- Yap, C. Y., C. K. Chua, Z. L. Dong, Z. H. Liu, D. Q. Zhang, L. E. Loh, and S. L. Sing. 2015. “Review of Selective Laser Melting: Materials and Applications.” Applied Physics Reviews 2: 041101. doi:https://doi.org/10.1063/1.4935926.
- Yasa, E., J. P. Kruth, and J. Deckers. 2011. “Manufacturing by Combining Selective Laser Melting and Selective Laser Erosion/Laser Re-Melting.” CIRP Annals 60: 263–266. doi:https://doi.org/10.1016/j.cirp.2011.03.063.
- Yeh, J. W., S. K. Chen, S. J. Lin, J. Y. Gan, T. S. Chin, T. T. Shun, C. H. Tsau, and S. Y. Chang. 2004. “Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes.” Advanced Engineering Materials 6: 299–303. doi:https://doi.org/10.1002/adem.200300567.
- Yin, S., X. Yan, C. Chen, R. Jenkins, M. Liu, and R. Lupoi. 2018. “Hybrid Additive Manufacturing of Al-Ti6Al4V Functionally Graded Materials with Selective Laser Melting and Cold Spraying.” Journal of Materials Processing Technology 255: 650–655. doi:https://doi.org/10.1016/j.jmatprotec.2018.01.015.
- Zhang, Y., and A. Bandyopadhyay. 2018. “Direct Fabrication of Compositionally Graded Ti-Al 2 O 3 Multi-Material Structures Using Laser Engineered Net Shaping.” Addit. Manuf 21: 104–111. doi:https://doi.org/10.1016/j.addma.2018.03.001.
- Zhang, Y., and A. Bandyopadhyay. 2019. “Direct Fabrication of Bimetallic Ti6Al4V+Al12Si Structures via Additive Manufacturing.” Addit. Manuf 29: 100783. doi:https://doi.org/10.1016/j.addma.2019.100783.
- Zhang, Y., and A. Bandyopadhyay. 2021. “Influence of Compositionally Graded Interface on Microstructure and Compressive Deformation of 316L Stainless Steel to Al12Si Aluminum Alloy Bimetallic Structures.” ACS Applied Materials & Interfaces 13: 9174–9185. doi:https://doi.org/10.1021/acsami.0c21478.
- Zhang, C., F. Chen, Z. Huang, M. Jia, G. Chen, Y. Ye, Y. Lin, et al. 2019. “Additive Manufacturing of Functionally Graded Materials: A Review.” Materials Science and Engineering: A 764: 138209. doi:https://doi.org/10.1016/j.msea.2019.138209.
- Zhang, Q. Z., W. B. Gong, and W. Liu. 2015. “Microstructure and Mechanical Properties of Dissimilar Al-Cu Joints by Friction Stir Welding.” Transactions of Nonferrous Metals Society of China 25: 1779–1786. doi:https://doi.org/10.1016/S1003-6326(15)63783-9.
- Zhang, X., L. Li, T. Pan, Y. Chen, Y. Zhang, W. Li, and F. Liou. 2020. “Additive Manufacturing of Copper-Tool Steel Dissimilar Joining: Experimental Characterization and Thermal Modeling.” Materials Characterization 170: 110692. doi:https://doi.org/10.1016/j.matchar.2020.110692.
- Zhang, X., T. Pan, A. Flood, Y. Chen, Y. Zhang, and F. Liou. 2021. “Investigation of Copper/Stainless Steel Multi-Metallic Materials Fabricated by Laser Metal Deposition.” Materials Science and Engineering: A 811: 141071. doi:https://doi.org/10.1016/j.msea.2021.141071.
- Zhang, X., C. Sun, T. Pan, A. Flood, Y. Zhang, L. Li, and F. Liou. 2020. “Additive Manufacturing of Copper – H13 Tool Steel bi-Metallic Structures via Ni-Based Multi-Interlayer.” Addit. Manuf 36: 101474. doi:https://doi.org/10.1016/j.addma.2020.101474.
- Zhang, M., Y. Yang, D. Wang, C. Song, and J. Chen. 2019. “Microstructure and Mechanical Properties of CuSn/18Ni300 Bimetallic Porous Structures Manufactured by Selective Laser Melting.” Materials & Design 165: 107583. doi:https://doi.org/10.1016/j.matdes.2019.107583.
- Zhang, Y., Y. J. Zhou, J. P. Lin, G. L. Chen, and P. K. Liaw. 2008. “Solid-solution Phase Formation Rules for Multi-Component Alloys.” Advanced Engineering Materials 10: 534–538. doi:https://doi.org/10.1002/adem.200700240.
- Zu, G., X. Sun, and J. Zhang. 2017. “Interfacial Bonding Mechanism and Mechanical Performance of Ti/Steel Bimetallic Clad Sheet Produced by Explosive Welding and Annealing, Xiyou Jinshu Cailiao Yu Gongcheng/Rare Met.” Mater. Eng 46: 906–911. doi:https://doi.org/10.1016/s1875-5372(17)30120-0.