Additive manufacturing of bimetallic structures

References

• Abe, T., and H. Sasahara. 2016. “Dissimilar Metal Deposition with a Stainless Steel and Nickel-Based Alloy Using Wire and arc-Based Additive Manufacturing.” Precision Engineering 45: 387–395. doi:https://doi.org/10.1016/j.precisioneng.2016.03.016.
   Web of Science ®Google Scholar
• Ahsan, M. R. U., X. Fan, G. J. Seo, C. Ji, M. Noakes, A. Nycz, P. K. Liaw, and D. B. Kim. 2021. “Microstructures and Mechanical Behavior of the Bimetallic Additively-Manufactured Structure (BAMS) of Austenitic Stainless Steel and Inconel 625.” Journal of Materials Science & Technology 74: 176–188. doi:https://doi.org/10.1016/j.jmst.2020.10.001.
   Web of Science ®Google Scholar
• Ahsan, M. R. U., A. N. M. Tanvir, G. J. Seo, B. Bates, W. Hawkins, C. Lee, P. K. Liaw, M. Noakes, A. Nycz, and D. B. Kim. 2020. “Heat-treatment Effects on a Bimetallic Additively-Manufactured Structure (BAMS) of the low-Carbon Steel and Austenitic-Stainless Steel.” Addit. Manuf 32: 101036. doi:https://doi.org/10.1016/j.addma.2020.101036.
   Web of Science ®Google Scholar
• Ahuja, B., M. Karg, and M. Schmidt. 2015. “SPIE Proceedings.” Laser 3D Manuf II 9353: 935304. doi:https://doi.org/10.1117/12.2082521.
   Google Scholar
• Akula, S., and K. P. Karunakaran. 2006. “Hybrid Adaptive Layer Manufacturing: An Intelligent art of Direct Metal Rapid Tooling Process.” Robotics and Computer-Integrated Manufacturing 22: 113–123. doi:https://doi.org/10.1016/j.rcim.2005.02.006.
   Web of Science ®Google Scholar
• Ansari, M., E. Jabari, and E. Toyserkani. 2021. “Opportunities and Challenges in Additive Manufacturing of Functionally Graded Metallic Materials via Powder-fed Laser Directed Energy Deposition: A Review.” Journal of Materials Processing Technology 294: 117117. doi:https://doi.org/10.1016/j.jmatprotec.2021.117117.
   Web of Science ®Google Scholar
• Balasubramanian, M. 2016. “Characterization of Diffusion-Bonded Titanium Alloy and 304 Stainless Steel with Ag as an Interlayer.” The International Journal of Advanced Manufacturing Technology 82: 153–162. doi:https://doi.org/10.1007/s00170-015-7376-8.
   Web of Science ®Google Scholar
• Balla, V. K., S. Banerjee, S. Bose, and A. Bandyopadhyay. 2010. “Direct Laser Processing of a Tantalum Coating on Titanium for Bone Replacement Structures.” Acta Biomaterialia 6: 2329–2334. doi:https://doi.org/10.1016/j.actbio.2009.11.021.
   PubMed Web of Science ®Google Scholar
• Bandyopadhyay, A., and S. Bose. 2016. Additive Manufacturing. Boca Raton: CRC Press, Boca Raton. doi:https://doi.org/10.1201/b18893.
   Google Scholar
• Bandyopadhyay, Amit, Susmita Bose, and Roger Narayan. 2022. “Translation of 3D-Printed Materials for Medical Applications.” MRS Bulletin 47 (1), doi:https://doi.org/10.1557/s43577-021-00258-2.
   Google Scholar
• Bandyopadhyay, A., and B. Heer. 2018. “Additive Manufacturing of Multi-Material Structures.” Materials Science and Engineering: R: Reports 129: 1–16. doi:https://doi.org/10.1016/j.mser.2018.04.001.
   Web of Science ®Google Scholar
• Bandyopadhyay, Amit, Kellen D. Traxel, and Susmita Bose. 2021. “Nature-inspired Materials and Structures Using 3D Printing.” Materials Science and Engineering: R: Reports 145: 100609. doi:https://doi.org/10.1016/j.mser.2021.100609.
   PubMed Web of Science ®Google Scholar
• Bandyopadhyay, Amit, Kellen D. Traxel, Melanie Lang, Michael Juhasz, Noam Eliaz, and Susmita Bose. 2022. “Alloy Design via Additive Manufacturing: Advantages, Challenges, Applications and Perspectives.” Materials Today, doi:https://doi.org/10.1016/j.mattod.2021.11.026.
   Google Scholar
• Bandyopadhyay, A., M. Upadhyayula, K. D. Traxel, and B. Onuike. 2019. “Influence of Deposition Orientation on Fatigue Response of LENS™ Processed Ti6Al4V.” Materials Letters 255: 126541. doi:https://doi.org/10.1016/j.matlet.2019.126541.
   PubMed Web of Science ®Google Scholar
• Bandyopadhyay, A., Y. Zhang, and S. Bose. 2020. “Recent Developments in Metal Additive Manufacturing.” Current Opinion in Chemical Engineering 28: 96–104. doi:https://doi.org/10.1016/j.coche.2020.03.001.
   PubMed Web of Science ®Google Scholar
• Bobbio, L. D., R. A. Otis, J. P. Borgonia, R. P. Dillon, A. A. Shapiro, Z. K. Liu, and A. M. Beese. 2017. “Additive Manufacturing of a Functionally Graded Material from Ti-6Al-4V to Invar: Experimental Characterization and Thermodynamic Calculations.” Acta Materialia 127: 133–142. doi:https://doi.org/10.1016/j.actamat.2016.12.070.
   Web of Science ®Google Scholar
• Bodner, S. C., L. T. G. van de Vorst, J. Zalesak, J. Todt, J. F. Keckes, V. Maier-Kiener, B. Sartory, et al. 2020. “Inconel-steel Multilayers by Liquid Dispersed Metal Powder bed Fusion: Microstructure, Residual Stress and Property Gradients.” Addit. Manuf 32: 101027. doi:https://doi.org/10.1016/j.addma.2019.101027.
   Web of Science ®Google Scholar
• Bonaiti, G., P. Parenti, M. Annoni, and S. Kapoor. 2017. “Micro-milling Machinability of DED Additive Titanium Ti-6Al-4V.” Procedia Manufacturing 10: 497–509. doi:https://doi.org/10.1016/j.promfg.2017.07.104.
   Google Scholar
• Buciumeanu, M., A. Bagheri, N. Shamsaei, S. M. Thompson, F. S. Silva, and B. Henriques. 2018. “Tribocorrosion Behavior of Additive Manufactured Ti-6Al-4V Biomedical Alloy.” Tribology International 119: 381–388. doi:https://doi.org/10.1016/j.triboint.2017.11.032.
   Web of Science ®Google Scholar
• Campo, K. N., L. C. Campanelli, L. Bergmann, J. F. dos Santos, and C. Bolfarini. 2014. “Microstructure and Interface Characterization of Dissimilar Friction Stir Welded lap Joints Between Ti-6Al-4V and AISI 304.” Materials & Design (1980-2015) 56: 139–145. doi:https://doi.org/10.1016/j.matdes.2013.11.002.
   Web of Science ®Google Scholar
• Carroll, B. E., R. A. Otis, J. P. Borgonia, J. O. Suh, R. P. Dillon, A. A. Shapiro, D. C. Hofmann, Z. K. Liu, and A. M. Beese. 2016. “Functionally Graded Material of 304L Stainless Steel and Inconel 625 Fabricated by Directed Energy Deposition: Characterization and Thermodynamic Modeling.” Acta Materialia 108: 46–54. doi:https://doi.org/10.1016/j.actamat.2016.02.019.
   Web of Science ®Google Scholar
• Carvalho, G. H. S. F. L., I. Galvão, R. Mendes, R. M. Leal, and A. Loureiro. 2020. “Explosive Welding of Aluminium to Stainless Steel Using Carbon Steel and Niobium Interlayers.” Journal of Materials Processing Technology 283: 116707. doi:https://doi.org/10.1016/j.jmatprotec.2020.116707.
   Web of Science ®Google Scholar
• Casalino, G., S. D’Ostuni, P. Guglielmi, P. Leo, M. Mortello, G. Palumbo, and A. Piccininni. 2017. “Mechanical and Microstructure Analysis of AA6061 and Ti6Al4V Fiber Laser Butt Weld.” Optik 148: 151–156. doi:https://doi.org/10.1016/j.ijleo.2017.08.138.
   Web of Science ®Google Scholar
• Chen, X., D. Inao, S. Tanaka, A. Mori, X. Li, and K. Hokamoto. 2020. “Explosive Welding of Al Alloys and High Strength Duplex Stainless Steel by Controlling Energetic Conditions.” Journal of Manufacturing Processes 58: 1318–1333. doi:https://doi.org/10.1016/j.jmapro.2020.09.037.
   Web of Science ®Google Scholar
• Chen, H. C., A. J. Pinkerton, and L. Li. 2011. “Fibre Laser Welding of Dissimilar Alloys of Ti-6Al-4V and Inconel 718 for Aerospace Applications.” The International Journal of Advanced Manufacturing Technology 52: 977–987. doi:https://doi.org/10.1007/s00170-010-2791-3.
   Web of Science ®Google Scholar
• Chen, L., C. Wang, X. Zhang, and G. Mi. 2021. “Effect of Parameters on Microstructure and Mechanical Property of Dissimilar Joints Between 316L Stainless Steel and GH909 Alloy by Laser Welding.” Journal of Manufacturing Processes 65: 60–69. doi:https://doi.org/10.1016/j.jmapro.2021.03.015.
   Web of Science ®Google Scholar
• Chen, J., Y. Yang, C. Song, D. Wang, S. Wu, and M. Zhang. 2020. “Influence Mechanism of Process Parameters on the Interfacial Characterization of Selective Laser Melting 316L/CuSn10.” Materials Science and Engineering: A 792: 139316. doi:https://doi.org/10.1016/j.msea.2020.139316.
   Web of Science ®Google Scholar
• Chen, J., Y. Yang, C. Song, M. Zhang, S. Wu, and D. Wang. 2019. “Interfacial Microstructure and Mechanical Properties of 316L /CuSn10 Multi-Material Bimetallic Structure Fabricated by Selective Laser Melting.” Materials Science and Engineering: A 752: 75–85. doi:https://doi.org/10.1016/j.msea.2019.02.097.
   Web of Science ®Google Scholar
• Chen, S., M. Zhang, J. Huang, C. Cui, H. Zhang, and X. Zhao. 2014. “Microstructures and Mechanical Property of Laser Butt Welding of Titanium Alloy to Stainless Steel.” Materials & Design 53: 504–511. doi:https://doi.org/10.1016/j.matdes.2013.07.044.
   Web of Science ®Google Scholar
• Collins, P. C., R. Banerjee, S. Banerjee, and H. L. Fraser. 2003. “Laser Deposition of Compositionally Graded Titanium-Vanadium and Titanium-Molybdenum Alloys.” Materials Science and Engineering: A 352: 118–128. doi:https://doi.org/10.1016/S0921-5093(02)00909-7.
   Web of Science ®Google Scholar
• Das, M., K. Bhattacharya, S. A. Dittrick, C. Mandal, V. K. Balla, T. S. Sampath Kumar, A. Bandyopadhyay, and I. Manna. 2014. “In situ Synthesized TiB-TiN Reinforced Ti6Al4V Alloy Composite Coatings: Microstructure, Tribological and in-Vitro Biocompatibility.” Journal of the Mechanical Behavior of Biomedical Materials 29: 259–271. doi:https://doi.org/10.1016/j.jmbbm.2013.09.006.
   PubMed Web of Science ®Google Scholar
• Demir, A. G., and B. Previtali. 2017. “Multi-material Selective Laser Melting of Fe/Al-12Si Components.” Manufacturing Letters 11: 8–11. doi:https://doi.org/10.1016/j.mfglet.2017.01.002.
   Google Scholar
• Denti, L., E. Bassoli, A. Gatto, E. Santecchia, and P. Mengucci. 2019. “Fatigue Life and Microstructure of Additive Manufactured Ti6Al4V After Different Finishing Processes.” Materials Science and Engineering: A 755: 1–9. doi:https://doi.org/10.1016/j.msea.2019.03.119.
   Web of Science ®Google Scholar
• Dharmendra, C., S. Shakerin, G. D. J. Ram, and M. Mohammadi. 2020. “Wire-arc Additive Manufacturing of Nickel Aluminum Bronze/Stainless Steel Hybrid Parts – Interfacial Characterization, Prospects, and Problems.” Materialia 13: 100834. doi:https://doi.org/10.1016/j.mtla.2020.100834.
   Google Scholar
• Dhinakaran, V., J. Ajith, A. Fathima, Yasin Fahmidha, T. Jagadeesha, T. Sathish, and B. Stalin. 2020. “Wire Arc Additive Manufacturing (WAAM) Process of Nickel Based Superalloys – A Review.” Materials Today: Proceedings 21: 920–925.
   Google Scholar
• Ding, D., Z. Pan, D. Cuiuri, and H. Li. 2015. “Wire-feed Additive Manufacturing of Metal Components: Technologies, Developments and Future Interests.” The International Journal of Advanced Manufacturing Technology 81: 465–481.
   Web of Science ®Google Scholar
• Domack, M. S., and J. M. Baughman. 2005. “Development of Nickel-Titanium Graded Composition Components.” Rapid Prototyping Journal 11: 41–51. doi:https://doi.org/10.1108/13552540510573383.
   Web of Science ®Google Scholar
• Du, W., Q. Bai, and B. Zhang. 2016. “A Novel Method for Additive/Subtractive Hybrid Manufacturing of Metallic Parts.” Procedia Manufacturing 5: 1018–1030. doi:https://doi.org/10.1016/j.promfg.2016.08.067.
   Google Scholar
• Elrefaey, A., and W. Tillmann. 2009. “Solid State Diffusion Bonding of Titanium to Steel Using a Copper Base Alloy as Interlayer.” Journal of Materials Processing Technology 209: 2746–2752. doi:https://doi.org/10.1016/j.jmatprotec.2008.06.014.
   Web of Science ®Google Scholar
• España, F. A., V. K. Balla, S. Bose, and A. Bandyopadhyay. 2010. “Design and Fabrication of CoCrMo Alloy Based Novel Structures for Load Bearing Implants Using Laser Engineered net Shaping.” Materials Science and Engineering: C 30: 50–57. doi:https://doi.org/10.1016/j.msec.2009.08.006.
   Web of Science ®Google Scholar
• Fallahi, A. A., A. Shokuhfar, A. Ostovari Moghaddam, and A. Abdolahzadeh. 2017. “Analysis of SiC Nano-Powder Effects on Friction Stir Welding of Dissimilar Al-Mg Alloy to A316L Stainless Steel.” Journal of Manufacturing Processes 30: 418–430. doi:https://doi.org/10.1016/j.jmapro.2017.09.027.
   Web of Science ®Google Scholar
• Flynn, J. M., A. Shokrani, S. T. Newman, and V. Dhokia. 2016. “Hybrid Additive and Subtractive Machine Tools – Research and Industrial Developments.” International Journal of Machine Tools and Manufacture 101: 79–101. doi:https://doi.org/10.1016/j.ijmachtools.2015.11.007.
   Web of Science ®Google Scholar
• Frazier, W. E. 2014. “Metal Additive Manufacturing: A Review.” Journal of Materials Engineering and Performance 23: 1917–1928. doi:https://doi.org/10.1007/s11665-014-0958-z.
   Web of Science ®Google Scholar
• Gradl, P. R., and C. S. Protz. 2020. “Technology Advancements for Channel Wall Nozzle Manufacturing in Liquid Rocket Engines.” Acta Astronautica 174: 148–158. doi:https://doi.org/10.1016/j.actaastro.2020.04.067.
   Web of Science ®Google Scholar
• Groden, C., K. D. Traxel, A. Afrouzian, E. Nyberg, and A. Bandyopadhyay. 2022. “Inconel 718-W7Ni3Fe Bimetallic Structures Using Directed Energy Deposition-Based Additive Manufacturing.” Virtual and Physical Prototyping, doi:https://doi.org/10.1080/17452759.2022.2025673.
   Google Scholar
• Guo, Z., M. Liu, X. Bian, M. Liu, and J. Li. 2019. “An Al-7Si Alloy/Cast Iron Bimetallic Composite with Super-High Shear Strength.” Journal of Materials Research and Technology 8: 3126–3136. doi:https://doi.org/10.1016/j.jmrt.2017.06.014.
   Google Scholar
• Guo, X., W. Wei, Y. Xu, A. Abd El-Aty, H. Liu, H. Wang, X. Luo, and J. Tao. 2019. “Wall Thickness Distribution of Cu–Al Bimetallic Tube Based on Free Bending Process.” International Journal of Mechanical Sciences 150: 12–19. doi:https://doi.org/10.1016/j.ijmecsci.2018.10.013.
   Web of Science ®Google Scholar
• Hadadzadeh, A., B. S. Amirkhiz, S. Shakerin, J. Kelly, J. Li, and M. Mohammadi. 2020. “Microstructural Investigation and Mechanical Behavior of a two-Material Component Fabricated Through Selective Laser Melting of AlSi10Mg on an Al-Cu-Ni-Fe-Mg Cast Alloy Substrate.” Addit. Manuf 31: 100937. doi:https://doi.org/10.1016/j.addma.2019.100937.
   Web of Science ®Google Scholar
• Hasanov, S., S. Alkunte, M. Rajeshirke, A. Gupta, O. Huseynov, I. Fidan, F. Alifui-Segbaya, and A. Rennie. 2022. “Review on Additive Manufacturing of Multi-Material Parts: Progress and Challenges.” J. Manuf. Mater. Process 6: 4. doi:https://doi.org/10.3390/jmmp6010004.
   Google Scholar
• Heer, B., and A. Bandyopadhyay. 2018. “Compositionally Graded Magnetic-Nonmagnetic Bimetallic Structure Using Laser Engineered net Shaping.” Materials Letters 216: 16–19. doi:https://doi.org/10.1016/j.matlet.2017.12.129.
   Web of Science ®Google Scholar
• Hofmann, D. C., J. Kolodziejska, S. Roberts, R. Otis, R. P. Dillon, J. O. Suh, Z. K. Liu, and J. P. Borgonia. 2014. “Compositionally Graded Metals: A New Frontier of Additive Manufacturing.” Journal of Materials Research 29: 1899–1910. doi:https://doi.org/10.1557/jmr.2014.208.
   Web of Science ®Google Scholar
• Hofmann, D. C., S. Roberts, R. Otis, J. Kolodziejska, R. P. Dillon, J. Suh, A. A. Shapiro, Z.-K. Liu, and J.-P. Borgonia. 2015. “Developing Gradient Metal Alloys Through Radial Deposition Additive Manufacturing.” Scientific Reports 4: 5357. doi:https://doi.org/10.1038/srep05357.
   Web of Science ®Google Scholar
• Huang, Y., M. C. Leu, J. Mazumder, and A. Donmez. 2015. “Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations.” Journal of Manufacturing Science and Engineering 137: 1–11. doi:https://doi.org/10.1115/1.4028725.
   Web of Science ®Google Scholar
• Hume-Rothery, W. 1966. “Atomic Diameters, Atomic Volumes and Solid Solubility Relations in Alloys.” Acta Metallurgica 14: 17–20. doi:https://doi.org/10.1016/0001-6160(66)90267-7.
   Google Scholar
• Imran, M. K., S. H. Masood, M. Brandt, S. Bhattacharya, and J. Mazumder. 2011. “Direct Metal Deposition (DMD) of H13 Tool Steel on Copper Alloy Substrate: Evaluation of Mechanical Properties.” Materials Science and Engineering: A 528: 3342–3349. doi:https://doi.org/10.1016/j.msea.2010.12.099.
   Google Scholar
• Ji, S., Z. Sun, W. Zhang, X. Chen, G. Xie, and H. Chang. 2020. “Microstructural Evolution and High Temperature Resistance of Functionally Graded Material Ti-6Al-4V/Inconel 718 Coated by Directed Energy Deposition-Laser.” Journal of Alloys and Compounds 848: 156255. doi:https://doi.org/10.1016/j.jallcom.2020.156255.
   Web of Science ®Google Scholar
• Jiménez, A., P. Bidare, H. Hassanin, F. Tarlochan, S. Dimov, and K. Essa. 2021. “Powder-based Laser Hybrid Additive Manufacturing of Metals: A Review.” The International Journal of Advanced Manufacturing Technology 114: 63–96.
   Web of Science ®Google Scholar
• Jiménez Mena, N., T. Sapanathan, P. J. Jacques, and A. Simar. 2021. “Combined Numerical and Experimental Estimation of the Fracture Toughness and Failure Analysis of Single lap Shear Test for Dissimilar Welds.” Engineering Fracture Mechanics 249: 107756. doi:https://doi.org/10.1016/j.engfracmech.2021.107756.
   Web of Science ®Google Scholar
• Ju, J., Y. Zhou, K. Wang, Y. Liu, J. Li, M. Kang, and J. Wang. 2020. “Tribological Investigation of Additive Manufacturing Medical Ti6Al4V Alloys Against Al2O3 Ceramic Balls in Artificial Saliva.” Journal of the Mechanical Behavior of Biomedical Materials 104: 103602. doi:https://doi.org/10.1016/j.jmbbm.2019.103602.
   PubMed Web of Science ®Google Scholar
• Karunakaran, K. P., S. Suryakumar, V. Pushpa, and S. Akula. 2010. “Low Cost Integration of Additive and Subtractive Processes for Hybrid Layered Manufacturing.” Robotics and Computer-Integrated Manufacturing 26: 490–499. doi:https://doi.org/10.1016/j.rcim.2010.03.008.
   Web of Science ®Google Scholar
• Kasperovich, G., and J. Hausmann. 2015. “Improvement of Fatigue Resistance and Ductility of TiAl6V4 Processed by Selective Laser Melting.” Journal of Materials Processing Technology 220: 202–214. doi:https://doi.org/10.1016/j.jmatprotec.2015.01.025.
   Web of Science ®Google Scholar
• Kelly, J. P., J. W. Elmer, F. J. Ryerson, J. R. I. Lee, and J. J. Haslam. 2021. “Directed Energy Deposition Additive Manufacturing of Functionally Graded Al-W Composites.” Addit. Manuf 39: 101845. doi:https://doi.org/10.1016/j.addma.2021.101845.
   Web of Science ®Google Scholar
• Kotecki, D. J., and J. C. Lippold. 2005. Welding Metallurgy and Weldability of Stainless Steels. Hoboken, NJ: John Wiley.
   Google Scholar
• Kundu, S., and S. Chatterjee. 2006. “Interfacial Microstructure and Mechanical Properties of Diffusion-Bonded Titanium-Stainless Steel Joints Using a Nickel Interlayer.” Materials Science and Engineering: A 425: 107–113. doi:https://doi.org/10.1016/j.msea.2006.03.034.
   Web of Science ®Google Scholar
• Kundu, S., and S. Chatterjee. 2010. “Evolution of Interface Microstructure and Mechanical Properties of Titanium/304 Stainless Steel Diffusion Bonded Joint Using Nb Interlayer.” ISIJ International 50: 1460–1465. doi:https://doi.org/10.2355/isijinternational.50.1460.
   Web of Science ®Google Scholar
• Kundu, S., S. Chatterjee, D. Olson, and B. Mishra. 2007. “Effects of Intermetallic Phases on the Bond Strength of Diffusion-Bonded Joints Between Titanium and 304 Stainless Steel Using Nickel Interlayer.” Metallurgical and Materials Transactions A 38: 2053–2060. doi:https://doi.org/10.1007/s11661-007-9273-8.
   Google Scholar
• Kundu, S., M. Ghosh, A. Laik, K. Bhanumurthy, G. B. Kale, and S. Chatterjee. 2005. “Diffusion Bonding of Commercially Pure Titanium to 304 Stainless Steel Using Copper Interlayer.” Materials Science and Engineering: A 407: 154–160. doi:https://doi.org/10.1016/j.msea.2005.07.010.
   Web of Science ®Google Scholar
• Kundu, S., S. Sam, and S. Chatterjee. 2011. “Interface Microstructure and Strength Properties of Ti-6Al-4V and Microduplex Stainless Steel Diffusion Bonded Joints.” Materials & Design 32: 2997–3003. doi:https://doi.org/10.1016/j.matdes.2010.12.052.
   Web of Science ®Google Scholar
• Lee, J. G., S. J. Hong, M. K. Lee, and C. K. Rhee. 2009. “High Strength Bonding of Titanium to Stainless Steel Using an Ag Interlayer.” Journal of Nuclear Materials 395: 145–149. doi:https://doi.org/10.1016/j.jnucmat.2009.10.045.
   Web of Science ®Google Scholar
• Li, P., Y. Gong, Y. Xu, Y. Qi, Y. Sun, and H. Zhang. 2019. “Inconel-steel Functionally Bimetal Materials by Hybrid Directed Energy Deposition and Thermal Milling: Microstructure and Mechanical Properties.” Archives of Civil and Mechanical Engineering 19: 820–831. doi:https://doi.org/10.1016/j.acme.2019.03.002.
   Web of Science ®Google Scholar
• Li, S., L. Hu, P. Dai, T. Bi, and D. Deng. 2021. “Influence of the Groove Shape on Welding Residual Stresses in P92/SUS304 Dissimilar Metal Butt-Welded Joints.” Journal of Manufacturing Processes 66: 376–386. doi:https://doi.org/10.1016/j.jmapro.2021.04.030.
   Web of Science ®Google Scholar
• Li, P., J. Li, J. Xiong, F. Zhang, and S. H. Raza. 2012. “Diffusion Bonding Titanium to Stainless Steel Using Nb/Cu/Ni Multi-Interlayer.” Materials Characterization 68: 82–87. doi:https://doi.org/10.1016/j.matchar.2012.03.016.
   Web of Science ®Google Scholar
• Lin, T. C., C. Cao, M. Sokoluk, L. Jiang, X. Wang, J. M. Schoenung, E. J. Lavernia, and X. Li. 2019. “Aluminum with Dispersed Nanoparticles by Laser Additive Manufacturing.” Nature Communications 10: 4124. doi:https://doi.org/10.1038/s41467-019-12047-2.
   PubMed Web of Science ®Google Scholar
• Linse, V. D., and H. E. Pattee. 1976. “Development of Explosive Welding Procedures to Fabricate Channeled Nozzle Structures.
   Google Scholar
• Liou, F., K. Slattery, M. Kinsella, J. Newkirk, H. N. Chou, and R. Landers. 2007. “Applications of a Hybrid Manufacturing Process for Fabrication of Metallic Structures.” Rapid Prototyping Journal 13: 236–244. doi:https://doi.org/10.1108/13552540710776188.
   Web of Science ®Google Scholar
• Liu, S., K. M. Hong, C. Katinas, and Y. C. Shin. 2019. “Multiphysics Modeling of Phase Transformation and Microhardness Evolution in Laser Direct Deposited Ti6Al4V.” Journal of Manufacturing Processes 45: 579–587. doi:https://doi.org/10.1016/j.jmapro.2019.07.027.
   Web of Science ®Google Scholar
• Liu, L., Y. F. Jia, and F. Z. Xuan. 2017. “Gradient Effect in the Waved Interfacial Layer of 304L/533B Bimetallic Plates Induced by Explosive Welding.” Materials Science and Engineering: A 704: 493–502. doi:https://doi.org/10.1016/j.msea.2017.08.012.
   Web of Science ®Google Scholar
• Liu, Z., R. Ma, G. Xu, W. Wang, and J. Liu. 2020. “Laser Additive Manufacturing of Bimetallic Structure from Ti-6Al-4V to Ti-48Al-2Cr-2Nb via Vanadium Interlayer.” Materials Letters 263: 127210. doi:https://doi.org/10.1016/j.matlet.2019.127210.
   Web of Science ®Google Scholar
• Liu, Z. H., D. Q. Zhang, S. L. Sing, C. K. Chua, and L. E. Loh. 2014. “Interfacial Characterization of SLM Parts in Multi-Material Processing: Metallurgical Diffusion Between 316L Stainless Steel and C18400 Copper Alloy.” Materials Characterization 94: 116–125. doi:https://doi.org/10.1016/j.matchar.2014.05.001.
   Web of Science ®Google Scholar
• Loh, G. H., E. Pei, D. Harrison, and M. D. Monzón. 2018. “An Overview of Functionally Graded Additive Manufacturing.” Addit. Manuf 23: 34–44. doi:https://doi.org/10.1016/j.addma.2018.06.023.
   Web of Science ®Google Scholar
• Mahmood, Y., P. wan Chen, I. A. Bataev, and X. Gao. 2020. “Experimental and Numerical Investigations of Interface Properties of Ti6Al4V/CP-Ti/Copper Composite Plate Prepared by Explosive Welding.” Def. Technol, doi:https://doi.org/10.1016/j.dt.2020.09.003.
   Google Scholar
• Martinez, R., I. Todd, and K. Mumtaz. 2019. “In situ alloying of Elemental Al-Cu12 Feedstock Using Selective Laser Melting.” Virtual and Physical Prototyping 14 (3): 242–252.
   Web of Science ®Google Scholar
• Mastanaiah, P., G. Madhusudhan Reddy, K. Satya Prasad, and C. V. S. Murthy. 2014. “An Investigation on Microstructures and Mechanical Properties of Explosive Cladded C103 Niobium Alloy Over C263 Nimonic Alloy.” Journal of Materials Processing Technology 214: 2316–2324. doi:https://doi.org/10.1016/j.jmatprotec.2014.04.025.
   Web of Science ®Google Scholar
• Mei, X., X. Wang, Y. Peng, H. Gu, G. Zhong, and S. Yang. 2019. “Interfacial Characterization and Mechanical Properties of 316L Stainless Steel/Inconel 718 Manufactured by Selective Laser Melting.” Materials Science and Engineering: A 758: 185–191. doi:https://doi.org/10.1016/j.msea.2019.05.011.
   Web of Science ®Google Scholar
• Mertens, A., S. Reginster, H. Paydas, Q. Contrepois, T. Dormal, O. Lemaire, and J. Lecomte-Beckers. 2014. “Mechanical Properties of Alloy Ti-6Al-4V and of Stainless Steel 316L Processed by Selective Laser Melting: Influence of out-of-Equilibrium Microstructures.” Powder Metallurgy 57: 184–189. doi:https://doi.org/10.0.4.155/1743290114Y.0000000092.
   Web of Science ®Google Scholar
• Mishra, S., T. J. Lienert, M. Q. Johnson, and T. DebRoy. 2008. “An Experimental and Theoretical Study of gas Tungsten arc Welding of Stainless Steel Plates with Different Sulfur Concentrations.” Acta Materialia 56: 2133–2146. doi:https://doi.org/10.1016/j.actamat.2008.01.028.
   Web of Science ®Google Scholar
• Mitra, I., S. Bose, W. S. Dernell, N. Dasgupta, C. Eckstrand, J. Herrick, M. J. Yaszemski, S. B. Goodman, and A. Bandyopadhyay. 2021. “3D Printing in Alloy Design to Improve Biocompatibility in Metallic Implants.” Mater. Today, doi:https://doi.org/10.1016/j.mattod.2020.11.021.
   Google Scholar
• Naik, S. R., G. M. Gadad, and A. M. Hebbale. 2021. “Joining of Dissimilar Metals Using Microwave Hybrid Heating and Tungsten Inert Gas Welding - A Review.” Mater. Today Proc, doi:https://doi.org/10.1016/j.matpr.2021.02.322.
   Google Scholar
• Nandan, R., T. DebRoy, and H. K. D. H. Bhadeshia. 2008. “Recent Advances in Friction-Stir Welding - Process, Weldment Structure and Properties.” Progress in Materials Science 53: 980–1023. doi:https://doi.org/10.1016/j.pmatsci.2008.05.001.
   Web of Science ®Google Scholar
• Ngo, T. D., A. Kashani, G. Imbalzano, K. T. Q. Nguyen, and D. Hui. 2018. “Additive Manufacturing (3D Printing): A Review of Materials, Methods, Applications and Challenges.” Composites Part B: Engineering 143: 172–196. doi:https://doi.org/10.1016/j.compositesb.2018.02.012.
   Web of Science ®Google Scholar
• Ning, J., L. J. Zhang, G. chuan Jiang, M. xia Xie, X. qing Yin, and J. xun Zhang. 2017. “Narrow gap Multi-Pass Laser Butt Welding of Explosion Welded CP-Ti/Q235B Bimetallic Sheet by Using a Copper Interlayer.” Journal of Alloys and Compounds 701: 587–602. doi:https://doi.org/10.1016/j.jallcom.2017.01.129.
   Web of Science ®Google Scholar
• Onuike, B., and A. Bandyopadhyay. 2018. “Additive Manufacturing of Inconel 718 – Ti6Al4V Bimetallic Structures.” Addit. Manuf 22: 844–851. doi:https://doi.org/10.1016/j.addma.2018.06.025.
   Web of Science ®Google Scholar
• Onuike, B., and A. Bandyopadhyay. 2019. “Bond Strength Measurement for Additively Manufactured Inconel 718- GRCop84 Copper Alloy Bimetallic Joints.” Addit. Manuf 27: 576–585. doi:https://doi.org/10.1016/j.addma.2019.04.003.
   PubMed Web of Science ®Google Scholar
• Onuike, B., and A. Bandyopadhyay. 2020. “Functional Bimetallic Joints of Ti6Al4V to SS410.” Addit. Manuf 31: 100931. doi:https://doi.org/10.1016/j.addma.2019.100931.
   PubMed Web of Science ®Google Scholar
• Onuike, B., B. Heer, and A. Bandyopadhyay. 2018. “Additive Manufacturing of Inconel 718—Copper Alloy Bimetallic Structure Using Laser Engineered net Shaping (LENSTM).” Addit. Manuf 21: 133–140. doi:https://doi.org/10.1016/j.addma.2018.02.007.
   Web of Science ®Google Scholar
• Orhan, N., T. I. Khan, and M. Eroǧlu. 2001. “Diffusion Bonding of a Microduplex Stainless Steel to Ti-6Al-4V.” Scripta Materialia 45: 441–446. doi:https://doi.org/10.1016/S1359-6462(01)01041-7.
   Web of Science ®Google Scholar
• Otto, F., Y. Yang, H. Bei, and E. P. George. 2013. “Relative Effects of Enthalpy and Entropy on the Phase Stability of Equiatomic High-Entropy Alloys.” Acta Materialia 61: 2628–2638. doi:https://doi.org/10.1016/j.actamat.2013.01.042.
   Web of Science ®Google Scholar
• Park, J. W., P. F. Mendez, and T. W. Eagar. 2002. “Strain Energy Distribution in Ceramic-to-Metal Joints.” Acta Materialia 50: 883–899. doi:https://doi.org/10.1016/S1359-6454(01)00352-4.
   Web of Science ®Google Scholar
• Pouranvari, M., A. Ekrami, and A. H. Kokabi. 2013. “Effect of the Bonding Time on the Microstructure and Mechanical Properties of a Transient-Liquid-Phase Bonded in718 Using a Ni-Cr-B Filler Alloy.” Mater. Tehnol 47: 593–599.
   Web of Science ®Google Scholar
• Prashanth, K. G., S. Scudino, T. Maity, J. Das, and J. Eckert. 2017. “Is the Energy Density a Reliable Parameter for Materials Synthesis by Selective Laser Melting?” Materials Research Letters 5: 386–390. doi:https://doi.org/10.1080/21663831.2017.1299808.
   Web of Science ®Google Scholar
• Qin, S., T. C. Novak, M. K. Vailhe, Z. K. Liu, and A. M. Beese. 2021. “Plasticity and Fracture Behavior of Inconel 625 Manufactured by Laser Powder bed Fusion: Comparison Between as-Built and Stress Relieved Conditions.” Materials Science and Engineering: A 806: 140808. doi:https://doi.org/10.1016/j.msea.2021.140808.
   Web of Science ®Google Scholar
• Rai, R., A. De, H. K. D. H. Bhadeshia, and T. DebRoy. 2011. “Review: Friction Stir Welding Tools.” Science and Technology of Welding and Joining 16: 325–342. doi:https://doi.org/10.0.4.155/1362171811Y.0000000023.
   Web of Science ®Google Scholar
• Reichardt, A., R. P. Dillon, J. P. Borgonia, A. A. Shapiro, B. W. McEnerney, T. Momose, and P. Hosemann. 2016. “Development and Characterization of Ti-6Al-4V to 304L Stainless Steel Gradient Components Fabricated with Laser Deposition Additive Manufacturing.” Materials & Design 104: 404–413. doi:https://doi.org/10.1016/j.matdes.2016.05.016.
   Web of Science ®Google Scholar
• Reichardt, A., A. A. Shapiro, R. Otis, R. P. Dillon, J. P. Borgonia, B. W. McEnerney, P. Hosemann, and A. M. Beese. 2021. “Advances in Additive Manufacturing of Metal-Based Functionally Graded Materials.” International Materials Reviews 66: 1–29. doi:https://doi.org/10.1080/09506608.2019.1709354.
   Web of Science ®Google Scholar
• Riccius, J. R., E. B. Zametaev, R. H. Stark, and R. Schwane. 2018. FSI analysis code validation motivated geometrical scaling of rocket engine nozzles and influence to natural frequency, in: 2018 Jt. Propuls. Conf., American Institute of Aeronautics and Astronautics. doi:https://doi.org/10.2514/6.2018-4860.
   Google Scholar
• Rosli, N. A., M. R. Alkahari, M. F. Abdollah, S. Maidin, and F. R. Ramli. 2021. “Review on Effect of Heat Input for Wire arc Additive Manufacturing Process.” Journal of Materials Research and Technology 11: 2127–2145. doi:https://doi.org/10.1016/j.jmrt.2021.02.002.
   Google Scholar
• Sahasrabudhe, H., R. Harrison, C. Carpenter, and A. Bandyopadhyay. 2015. “Stainless Steel to Titanium Bimetallic Structure Using LENSTM.” Addit. Manuf 5: 1–8. doi:https://doi.org/10.1016/j.addma.2014.10.002.
   Web of Science ®Google Scholar
• Schmelzle, J., E. V. Kline, C. J. Dickman, E. W. Reutzel, G. Jones, and T. W. Simpson. 2015. “(Re)Designing for Part Consolidation: Understanding the Challenges of Metal Additive Manufacturing.” Journal of Mechanical Design 137: 1–12. doi:https://doi.org/10.1115/1.4031156.
   Web of Science ®Google Scholar
• Schneider-Maunoury, C., L. Weiss, D. Boisselier, and P. Laheurte. 2018. “Crystallographic analysis of functionally graded titanium-molybdenum alloys with DED-CLAD® process.” Procedia CIRP, Elsevier B.V., 180–183. doi:https://doi.org/10.1016/j.procir.2018.08.089.
   Google Scholar
• Shah, K., I. U. Haq, S. A. Shah, F. U. Khan, M. T. Khan, and S. Khan. 2014. “Experimental Study of Direct Laser Deposition of ti-6al-4v and Inconel 718 by Using Pulsed Parameters.” Sci. World J 2014: 841546–841549. doi:https://doi.org/10.1155/2014/841549.
   Google Scholar
• Shakerin, S., M. Sanjari, B. S. Amirkhiz, and M. Mohammadi. 2020. “Interface Engineering of Additively Manufactured Maraging Steel-H13 Bimetallic Structures.” Materials Characterization 170: 110728. doi:https://doi.org/10.1016/j.matchar.2020.110728.
   Web of Science ®Google Scholar
• Shang, C., C. Wang, C. Li, G. Yang, G. Xu, and J. You. 2020. “Eliminating the Crack of Laser 3D Printed Functionally Graded Material from TA15 to Inconel718 by Base Preheating.” Optics & Laser Technology 126: 106100. doi:https://doi.org/10.1016/j.optlastec.2020.106100.
   Web of Science ®Google Scholar
• Shang, C., C. Wang, G. Xu, C. Li, and J. You. 2019. “Laser Additive Manufacturing of TA15 - Inconel 718 Bimetallic Structure via Nb/Cu Multi-Interlayer.” Vacuum 169: 108888. doi:https://doi.org/10.1016/j.vacuum.2019.108888.
   Web of Science ®Google Scholar
• Shiue, R. K., S. K. Wu, and J. Y. Shiue. 2008. “Infrared Brazing of Ti-6Al-4V and 17-4 PH Stainless Steel with (Ni)/Cr Barrier Layer(s).” Materials Science and Engineering: A 488: 186–194. doi:https://doi.org/10.1016/j.msea.2007.10.075.
   Web of Science ®Google Scholar
• Simchi, A. 2006. “Direct Laser Sintering of Metal Powders: Mechanism, Kinetics and Microstructural Features.” Materials Science and Engineering: A 428: 148–158. doi:https://doi.org/10.1016/j.msea.2006.04.117.
   Web of Science ®Google Scholar
• Simonelli, M., Y. Y. Tse, and C. Tuck. 2014. “On the Texture Formation of Selective Laser Melted Ti-6Al-4V.” Metallurgical and Materials Transactions A 45: 2863–2872. doi:https://doi.org/10.1007/s11661-014-2218-0.
   Web of Science ®Google Scholar
• Sing, S. L., S. Huang, G. D. Goh, G. L. Goh, C. F. Tey, J. H. L. Tan, and W. Y. Yeong. 2021. “Emerging Metallic Systems for Additive Manufacturing: In-situ Alloying and Multi-Metal Processing in Laser Powder bed Fusion.” Progress in Materials Science 119: 100795.
   Web of Science ®Google Scholar
• Sing, S. L., L. P. Lam, D. Q. Zhang, Z. H. Liu, and C. K. Chua. 2015. “Interfacial Characterization of SLM Parts in Multi-Material Processing: Intermetallic Phase Formation Between AlSi10Mg and C18400 Copper Alloy.” Materials Characterization 107: 220–227. doi:https://doi.org/10.1016/j.matchar.2015.07.007.
   Web of Science ®Google Scholar
• Singh, P., D. Deepak, and G. S. Brar. 2021. “Optical Micrograph and Micro-Hardness Behavior of Dissimilar Welded Joints of Aluminum (Al 6061-T6) and Stainless Steel (SS 304) with Friction Crush Welding.” Materials Today: Proceedings 44: 1000–1004. doi:https://doi.org/10.1016/j.matpr.2020.11.171.
   Google Scholar
• Sireesha, M., S. K. Albert, V. Shankar, and S. Sundaresan. 2000. “A Comparative Evaluation of Welding Consumables for Dissimilar Welds Between 316LN Austenitic Stainless Steel and Alloy 800.” Journal of Nuclear Materials 279: 65–76. doi:https://doi.org/10.1016/S0022-3115(99)00275-5.
   Web of Science ®Google Scholar
• Song, B., S. Dong, P. Coddet, H. Liao, and C. Coddet. 2012. “Fabrication and Microstructure Characterization of Selective Laser-Melted FeAl Intermetallic Parts.” Surface and Coatings Technology 206: 4704–4709. doi:https://doi.org/10.1016/j.surfcoat.2012.05.072.
   Web of Science ®Google Scholar
• Song, J., and B. Sun. 2017. “Thermal-structural Analysis of Regeneratively-Cooled Thrust Chamber Wall in Reusable LOX/Methane Ocket Engines.” Chinese Journal of Aeronautics 30: 1043–1053. doi:https://doi.org/10.1016/j.cja.2017.04.007.
   Web of Science ®Google Scholar
• Sun, Z., Y.-H. Chueh, and L. Li. 2020. “Multiphase Mesoscopic Simulation of Multiple and Functionally Gradient Materials Laser Powder bed Fusion Additive Manufacturing Processes.” Addt Manuf 35: 101448.
   Web of Science ®Google Scholar
• Tammas-Williams, S., I. Todd, R. M. Mahamood, E. T. Akinlabi, S. Tammas-Williams, and I. Todd. 2017. Functionally Graded Materials. Cham: Springer International Publishing AG, Cham. doi:https://doi.org/10.1201/9781315151441.
   Google Scholar
• Tan, X., Y. Kok, Y. J. Tan, M. Descoins, D. Mangelinck, S. B. Tor, K. F. Leong, and C. K. Chua. 2015. “Graded Microstructure and Mechanical Properties of Additive Manufactured Ti–6Al–4V via Electron Beam Melting.” Acta Materialia 97: 1–16. doi:https://doi.org/10.1016/j.actamat.2015.06.036.
   Web of Science ®Google Scholar
• Tan, X., Y. Kok, Y. J. Tan, G. Vastola, Q. X. Pei, G. Zhang, Y. W. Zhang, S. B. Tor, K. F. Leong, and C. K. Chua. 2015. “An Experimental and Simulation Study on Build Thickness Dependent Microstructure for Electron Beam Melted Ti-6Al-4V.” Journal of Alloys and Compounds 646: 303–309. doi:https://doi.org/10.1016/j.jallcom.2015.05.178.
   Web of Science ®Google Scholar
• Tan, C., K. Zhou, and T. Kuang. 2019. “Selective Laser Melting of Tungsten-Copper Functionally Graded Material.” Materials Letters 237: 328–331.
   Web of Science ®Google Scholar
• Tanvir, A. N. M., M. R. U. Ahsan, C. Ji, W. Hawkins, B. Bates, and D. B. Kim. 2019. “Heat Treatment Effects on Inconel 625 Components Fabricated by Wire + arc Additive Manufacturing (WAAM)—Part 1: Microstructural Characterization.” The International Journal of Advanced Manufacturing Technology 103: 3785–3798. doi:https://doi.org/10.1007/s00170-019-03828-6.
   Web of Science ®Google Scholar
• Tey, C. F., X. Tan, S. L. Sing, and W. Y. Yeong. 2020. “Additive Manufacturing of Multiple Materials by Selective Laser Melting: Ti-Alloy to Stainless Steel via a Cu-Alloy Interlayer.” Additive Manufacturing 31: 100970.
   Web of Science ®Google Scholar
• The Materials Information Society. 1992. ASM Handbook Volume 3 - Alloy Phase Diagrams, ASM International. doi:https://doi.org/10.1007/BF02869318.
   Google Scholar
• Thermal Diffusivity/Conductivity, Seebeck Coefficient/Electrical Conductivity and Time Domain Thermoreflectance. n.d. Accessed April 26, 2021. https://www.netzsch-thermal-analysis.com/en/products-solutions/thermal-diffusivity-conductivity/.
   Google Scholar
• Thompson, M. K., G. Moroni, T. Vaneker, G. Fadel, R. I. Campbell, I. Gibson, A. Bernard, et al. 2016. “Design for Additive Manufacturing: Trends, Opportunities, Considerations, and Constraints.” CIRP Annals 65: 737–760. doi:https://doi.org/10.1016/j.cirp.2016.05.004.
   Web of Science ®Google Scholar
• Tomashchuk, I., P. Sallamand, N. Belyavina, and M. Pilloz. 2013. “Evolution of Microstructures and Mechanical Properties During Dissimilar Electron Beam Welding of Titanium Alloy to Stainless Steel via Copper Interlayer.” Materials Science and Engineering: A 585: 114–122. doi:https://doi.org/10.1016/j.msea.2013.07.050.
   Web of Science ®Google Scholar
• Torkamany, M. J., F. Malek Ghaini, and R. Poursalehi. 2014. “Dissimilar Pulsed Nd:Yag laser Welding of Pure Niobium to Ti–6Al–4V.” Materials & Design 53: 915–920. doi:https://doi.org/10.1016/j.matdes.2013.07.094.
   Web of Science ®Google Scholar
• Traxel, K. D., and A. Bandyopadhyay. 2020. “Influence of in situ Ceramic Reinforcement Towards Tailoring Titanium Matrix Composites Using Laser-Based Additive Manufacturing.” Addit. Manuf 31: 101004. doi:https://doi.org/10.1016/j.addma.2019.101004.
   PubMed Web of Science ®Google Scholar
• Traxel, Kellen D., and Amit Bandyopadhyay. 2021. “Designing High-Temperature Oxidation-Resistant Titanium Matrix Composites via Directed Energy Deposition-Based Additive Manufacturing.” Materials & Design 212), doi:https://doi.org/10.1016/j.matdes.2021.110205.
   Google Scholar
• Uscinowicz, R. 2013. “Impact of Temperature on Shear Strength of Single lap Al-Cu Bimetallic Joint.” Composites Part B: Engineering 44: 344–356. doi:https://doi.org/10.1016/j.compositesb.2012.04.073.
   Web of Science ®Google Scholar
• Utyaganova, V., A. Filippov, S. Tarasov, N. Shamarin, D. Gurianov, A. Vorontsov, A. Chumaevskii, et al. 2021. “Characterization of AA7075/AA5356 Gradient Transition Zone in an Electron Beam Wire-Feed Additive Manufactured Sample.” Materials Characterization 172: 110867. doi:https://doi.org/10.1016/j.matchar.2020.110867.
   Web of Science ®Google Scholar
• Velu, M., and S. Bhat. 2015. “Experimental Investigations of Fracture and Fatigue Crack Growth of Copper-Steel Joints arc Welded Using Nickel-Base Filler.” Materials & Design 67: 244–260. doi:https://doi.org/10.1016/j.matdes.2014.11.026.
   Web of Science ®Google Scholar
• Vigraman, T., D. Ravindran, and R. Narayanasamy. 2012. “Effect of Phase Transformation and Intermetallic Compounds on the Microstructure and Tensile Strength Properties of Diffusion-Bonded Joints Between Ti-6Al-4V and AISI 304L.” Materials & Design (1980-2015) 36: 714–727. doi:https://doi.org/10.1016/j.matdes.2011.12.024.
   Web of Science ®Google Scholar
• Wang, Z., Y. Huang, Y. Yang, J. Wang, and C. T. Liu. 2015. “Atomic-size Effect and Solid Solubility of Multicomponent Alloys.” Scripta Materialia 94: 28–31. doi:https://doi.org/10.1016/j.scriptamat.2014.09.010.
   Web of Science ®Google Scholar
• Wang, J., Z. Pan, L. Wang, L. Su, K. Carpenter, J. Wang, R. Wang, and H. Li. 2020. “In-situ Dual Wire arc Additive Manufacturing of NiTi-Coating on Ti6Al4V Alloys: Microstructure Characterization and Mechanical Properties.” Surface and Coatings Technology 386: 125439. doi:https://doi.org/10.1016/j.surfcoat.2020.125439.
   Web of Science ®Google Scholar
• Wang, J., W. J. Wu, W. Jing, X. Tan, G. J. Bi, S. B. Tor, K. F. Leong, C. K. Chua, and E. Liu. 2019. “Improvement of Densification and Microstructure of ASTM A131 EH36 Steel Samples Additively Manufactured via Selective Laser Melting with Varying Laser Scanning Speed and Hatch Spacing.” Mater. Sci. Eng. A. Struct. Mater 746: 300–313. doi:https://doi.org/10.1016/j.msea.2019.01.019.
   Web of Science ®Google Scholar
• Wei, C., and L. Li. 2021. “Recent Progress and Scientific Challenges in Multi-Material Additive Manufacturing via Laser-Based Powder Bed Fusion.” Virtual and Physical Prototyping, 1–25.
   Web of Science ®Google Scholar
• Wilson-Heid, A. E., and A. M. Beese. 2021. “Combined Effects of Porosity and Stress State on the Failure Behavior of Laser Powder bed Fusion Stainless Steel 316L.” Addit. Manuf 39: 101862. doi:https://doi.org/10.1016/j.addma.2021.101862.
   Web of Science ®Google Scholar
• Wu, B., Z. Qiu, Z. Pan, K. Carpenter, T. Wang, D. Ding, S. Van Duin, and H. Li. 2020. “Enhanced Interface Strength in Steel-Nickel Bimetallic Component Fabricated Using Wire arc Additive Manufacturing with Interweaving Deposition Strategy.” Journal of Materials Science & Technology 52: 226–234. doi:https://doi.org/10.1016/j.jmst.2020.04.019.
   Web of Science ®Google Scholar
• Xu, N., J. Shen, S. Hu, Y. Tian, and J. Bi. 2021. “Bimetallic Structure of Ti6Al4V and Al6.21Cu Fabricated by Cold Metal Transfer Additive Manufacturing via Nb Interlayer Added by TIG.” Materials Letters 302: 130397. doi:https://doi.org/10.1016/J.MATLET.2021.130397.
   Web of Science ®Google Scholar
• Xu, J., M. Yang, H. Ma, Z. Shen, and Z. Chen. 2020. “Fabrication and Performance Studies on Explosively Welded CuCrZr/316L Bimetallic Plate Applied in Extreme Environments.” Journal of Materials Research and Technology 9: 8971–8984. doi:https://doi.org/10.1016/j.jmrt.2020.05.115.
   Google Scholar
• Xue, A., X. Lin, L. Wang, J. Wang, and W. Huang. 2019. “Influence of Trace Boron Addition on Microstructure, Tensile Properties and Their Anisotropy of Ti6Al4V Fabricated by Laser Directed Energy Deposition.” Materials & Design 181: 107943. doi:https://doi.org/10.1016/j.matdes.2019.107943.
   Web of Science ®Google Scholar
• Yadroitsev, I., P. Bertrand, and I. Smurov. 2007. “Parametric Analysis of the Selective Laser Melting Process.” Applied Surface Science 253: 8064–8069. doi:https://doi.org/10.1016/j.apsusc.2007.02.088.
   Web of Science ®Google Scholar
• Yan, L., Y. Chen, and F. Liou. 2020. “Additive Manufacturing of Functionally Graded Metallic Materials Using Laser Metal Deposition.” Addit. Manuf 31: 100901. doi:https://doi.org/10.1016/j.addma.2019.100901.
   Web of Science ®Google Scholar
• Yao, L., S. Huang, U. Ramamurty, and Z. M. Xiao. 2021. “On the Formation of “Fish-Scale” Morphology with Curved Grain Interfacial Microstructures During Selective Laser Melting of Dissimilar Alloys.” Acta Materialia 220: 117331.
   Web of Science ®Google Scholar
• Yap, C. Y., C. K. Chua, Z. L. Dong, Z. H. Liu, D. Q. Zhang, L. E. Loh, and S. L. Sing. 2015. “Review of Selective Laser Melting: Materials and Applications.” Applied Physics Reviews 2: 041101. doi:https://doi.org/10.1063/1.4935926.
   Web of Science ®Google Scholar
• Yasa, E., J. P. Kruth, and J. Deckers. 2011. “Manufacturing by Combining Selective Laser Melting and Selective Laser Erosion/Laser Re-Melting.” CIRP Annals 60: 263–266. doi:https://doi.org/10.1016/j.cirp.2011.03.063.
   Web of Science ®Google Scholar
• Yeh, J. W., S. K. Chen, S. J. Lin, J. Y. Gan, T. S. Chin, T. T. Shun, C. H. Tsau, and S. Y. Chang. 2004. “Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes.” Advanced Engineering Materials 6: 299–303. doi:https://doi.org/10.1002/adem.200300567.
   Web of Science ®Google Scholar
• Yin, S., X. Yan, C. Chen, R. Jenkins, M. Liu, and R. Lupoi. 2018. “Hybrid Additive Manufacturing of Al-Ti6Al4V Functionally Graded Materials with Selective Laser Melting and Cold Spraying.” Journal of Materials Processing Technology 255: 650–655. doi:https://doi.org/10.1016/j.jmatprotec.2018.01.015.
   Web of Science ®Google Scholar
• Zhang, Y., and A. Bandyopadhyay. 2018. “Direct Fabrication of Compositionally Graded Ti-Al 2 O 3 Multi-Material Structures Using Laser Engineered Net Shaping.” Addit. Manuf 21: 104–111. doi:https://doi.org/10.1016/j.addma.2018.03.001.
   Web of Science ®Google Scholar
• Zhang, Y., and A. Bandyopadhyay. 2019. “Direct Fabrication of Bimetallic Ti6Al4V+Al12Si Structures via Additive Manufacturing.” Addit. Manuf 29: 100783. doi:https://doi.org/10.1016/j.addma.2019.100783.
   PubMed Web of Science ®Google Scholar
• Zhang, Y., and A. Bandyopadhyay. 2021. “Influence of Compositionally Graded Interface on Microstructure and Compressive Deformation of 316L Stainless Steel to Al12Si Aluminum Alloy Bimetallic Structures.” ACS Applied Materials & Interfaces 13: 9174–9185. doi:https://doi.org/10.1021/acsami.0c21478.
   PubMed Web of Science ®Google Scholar
• Zhang, C., F. Chen, Z. Huang, M. Jia, G. Chen, Y. Ye, Y. Lin, et al. 2019. “Additive Manufacturing of Functionally Graded Materials: A Review.” Materials Science and Engineering: A 764: 138209. doi:https://doi.org/10.1016/j.msea.2019.138209.
   Web of Science ®Google Scholar
• Zhang, Q. Z., W. B. Gong, and W. Liu. 2015. “Microstructure and Mechanical Properties of Dissimilar Al-Cu Joints by Friction Stir Welding.” Transactions of Nonferrous Metals Society of China 25: 1779–1786. doi:https://doi.org/10.1016/S1003-6326(15)63783-9.
   Web of Science ®Google Scholar
• Zhang, X., L. Li, T. Pan, Y. Chen, Y. Zhang, W. Li, and F. Liou. 2020. “Additive Manufacturing of Copper-Tool Steel Dissimilar Joining: Experimental Characterization and Thermal Modeling.” Materials Characterization 170: 110692. doi:https://doi.org/10.1016/j.matchar.2020.110692.
   Web of Science ®Google Scholar
• Zhang, X., T. Pan, A. Flood, Y. Chen, Y. Zhang, and F. Liou. 2021. “Investigation of Copper/Stainless Steel Multi-Metallic Materials Fabricated by Laser Metal Deposition.” Materials Science and Engineering: A 811: 141071. doi:https://doi.org/10.1016/j.msea.2021.141071.
   Web of Science ®Google Scholar
• Zhang, X., C. Sun, T. Pan, A. Flood, Y. Zhang, L. Li, and F. Liou. 2020. “Additive Manufacturing of Copper – H13 Tool Steel bi-Metallic Structures via Ni-Based Multi-Interlayer.” Addit. Manuf 36: 101474. doi:https://doi.org/10.1016/j.addma.2020.101474.
   Web of Science ®Google Scholar
• Zhang, M., Y. Yang, D. Wang, C. Song, and J. Chen. 2019. “Microstructure and Mechanical Properties of CuSn/18Ni300 Bimetallic Porous Structures Manufactured by Selective Laser Melting.” Materials & Design 165: 107583. doi:https://doi.org/10.1016/j.matdes.2019.107583.
   Web of Science ®Google Scholar
• Zhang, Y., Y. J. Zhou, J. P. Lin, G. L. Chen, and P. K. Liaw. 2008. “Solid-solution Phase Formation Rules for Multi-Component Alloys.” Advanced Engineering Materials 10: 534–538. doi:https://doi.org/10.1002/adem.200700240.
   Web of Science ®Google Scholar
• Zu, G., X. Sun, and J. Zhang. 2017. “Interfacial Bonding Mechanism and Mechanical Performance of Ti/Steel Bimetallic Clad Sheet Produced by Explosive Welding and Annealing, Xiyou Jinshu Cailiao Yu Gongcheng/Rare Met.” Mater. Eng 46: 906–911. doi:https://doi.org/10.1016/s1875-5372(17)30120-0.
   Google Scholar