References
- Ahadi, A., and Q. Sun. 2014. “Effects of Grain Size on the Rate-Dependent Thermomechanical Responses of Nanostructured Superelastic NiTi.” Acta Materialia 76: 186–197. https://doi.org/https://doi.org/10.1016/j.actamat.2014.05.007.
- Ahadi, A., and Q. Sun. 2015. “Stress-induced Nanoscale Phase Transition in Superelastic NiTi by in Situ X-ray Diffraction.” Acta Materialia 90: 272–281. https://doi.org/https://doi.org/10.1016/j.actamat.2015.02.024.
- Alagha, A. N., S. Hussain, and W. Zaki. 2021. “Additive Manufacturing of Shape Memory Alloys: A Review with Emphasis on Powder Bed Systems.” Materials & Design 204: 109654. https://doi.org/https://doi.org/10.1016/j.matdes.2021.109654.
- Brandes, E. A., and G. B. Brook. 1983. “Smithells Metals Reference Book, Sixth Edition”.
- Cao, Y., X. Zhou, D. Cong, H. Zheng, Y. Cao, Z. Nie, Z. Chen, et al. 2020. “Large Tunable Elastocaloric Effect in Additively Manufactured Ni–Ti Shape Memory Alloys.” Acta Materialia 194: 178–189. https://doi.org/https://doi.org/10.1016/j.actamat.2020.04.007.
- Chen, H., F. Xiao, X. Liang, Z. Li, Zhu Li, X. Jin, N. Min, and T. Fukuda. 2019. “Improvement of the Stability of Superelasticity and Elastocaloric Effect of a Ni-Rich Ti-Ni Alloy by Precipitation and Grain Refinement.” Scripta Materialia 162: 230–234. https://doi.org/https://doi.org/10.1016/j.scriptamat.2018.11.024.
- Cho, J. H., D. F. Farson, J. O. Milewski, and K. J. Hollis. 2009. “Weld Pool Flows During Initial Stages of Keyhole Formation in Laser Welding.” Journal of Physics D: Applied Physics 42 (17): 175502. https://doi.org/https://doi.org/10.1088/0022-3727/42/17/175502.
- Chu, K., and Q. Sun. 2021. “Reducing Functional Fatigue, Transition Stress and Hysteresis of NiTi Micropillars by one-Step Overstressed Plastic Deformation.” Scripta Materialia 201: 113958. https://doi.org/https://doi.org/10.1016/j.scriptamat.2021.113958.
- Committe, A. 1990. ASM Handbook, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials. vol. 2. ASM International.
- Elahinia, Mohammad H., Mahdi Hashemi, Majid Tabesh, and Sarit B. Bhaduri. 2012. “Manufacturing and Processing of NiTi Implants: A Review.” Progress in Materials Science 57 (5): 911–946. https://doi.org/https://doi.org/10.1016/j.pmatsci.2011.11.001.
- Elahinia, M., N. S. Moghaddam, M. T. Andani, A. Amerinatanzi, B. A. Bimber, and R. F. Hamilton. 2016. “Fabrication of NiTi Through Additive Manufacturing: A Review.” Progress in Materials Science 83: 630–663. https://doi.org/https://doi.org/10.1016/j.pmatsci.2016.08.001.
- Fereiduni, E., A. Ghasemi, and M. Elbestawi. 2019. “Selective Laser Melting of Hybrid ex-Situ/in-Situ Reinforced Titanium Matrix Composites: Laser/Powder Interaction, Reinforcement Formation Mechanism, and non-Equilibrium Microstructural Evolutions.” Materials & Design 108185. https://doi.org/https://doi.org/10.1016/j.matdes.2019.108185.
- Franco, B. E., J. Ma, B. Loveall, G. A. Tapia, K. Karayagiz, J. Liu, A. Elwany, R. Arroyave, and I. Karaman. 2017. “A Sensory Material Approach for Reducing Variability in Additively Manufactured Metal Parts.” Scientific Reports 7 (1): 3604. https://doi.org/https://doi.org/10.1038/s41598-017-03499-x.
- Frenzel, J., E. P. George, A. Dlouhy, Ch Somsen, M. F. X. Wagner, and G. Eggeler. 2010. “Influence of Ni on Martensitic Phase Transformations in NiTi Shape Memory Alloys.” Acta Materialia 58 (9): 3444–3458. https://doi.org/https://doi.org/10.1016/j.actamat.2010.02.019.
- Gu, D., C. Ma, D. Dai, J. Yang, K. Lin, H. Zhang, and H. Zhang. 2021a. “Additively Manufacturing-Enabled Hierarchical NiTi-Based Shape Memory Alloys with High Strength and Toughness.” Virtual and Physical Prototyping, 1–20. https://doi.org/https://doi.org/10.1080/17452759.2021.1892389.
- Gu, D., X. Shi, R. Poprawe, D. L. Bourell, R. Setchi, and J. Zhu. 2021b. “Material-Structure-Performance Integrated Laser-Metal Additive Manufacturing.” Science 372 (6545). https://doi.org/https://doi.org/10.1126/science.abg1487.
- Guo, Y., Y. Zhao, S. Wang, C. Jiang, and J. Zhang. 2018. “Relationship Between the Zeta Potential and the Chemical Agglomeration Efficiency of Fine Particles in Flue gas During Coal Combustion.” Fuel 215: 756–765. https://doi.org/https://doi.org/10.1016/j.fuel.2017.11.005.
- Herzog, D., V. Seyda, E. Wycisk, and C. Emmelmann. 2016. “Additive Manufacturing of Metals.” Acta Materialia 117: 371–392. https://doi.org/https://doi.org/10.1016/j.actamat.2016.07.019.
- Hossain, A. A., M. Yang, A. Checco, G. Doerk, and C. E. Colosqui. 2020. “Large-area Nanostructured Surfaces with Tunable Zeta Potentials.” Applied Materials Today 19: 100553. https://doi.org/https://doi.org/10.1016/j.apmt.2019.100553.
- Hou, H., E. Simsek, T. Ma, N. S. Johnson, S. Qian, C. Cissé, D. Stasak, et al. 2019. “Fatigue-resistant High-Performance Elastocaloric Materials Made by Additive Manufacturing.” Science 366 (6469): 1116–1121. https://doi.org/https://doi.org/10.1126/science.aax7616.
- Ishida, A., M. Sato, A. Takei, and Miyazaki, S. 1995. “Effect of Heat Treatment on Shape Memory Behavior of Ti-Rich Ti–Ni Thin Films.” Materials Transactions, JIM 36 (11): 1349–1355.
- Jani, J. M., M. Leary, A. Subic, and M. A. Gibson. 2014. “A Review of Shape Memory Alloy Research, Applications and Opportunities.” Materials & Design (1980-2015) 56: 1078–1113. https://doi.org/https://doi.org/10.1016/j.matdes.2013.11.084.
- Johnson, D. C., B. Kuhr, D. Farkas, and G. S. Was. 2019. “Quantitative Linkage Between the Stress at Dislocation Channel – Grain Boundary Interaction Sites and Irradiation Assisted Stress Corrosion Crack Initiation.” Acta Materialia 170: 166–175. https://doi.org/https://doi.org/10.1016/j.actamat.2019.02.032.
- Kang, L. M., Y. J. Cai, X. C. Luo, Z. J. Li, X. B. Liu, Z. Wang, Y. Y. Li, and C. Yang. 2021. “Bimorphic Microstructure in Ti-6Al-4V Alloy Manipulated by Spark Plasma Sintering and in-Situ Press Forging.” Scripta Materialia 193: 43–48. https://doi.org/https://doi.org/10.1016/j.scriptamat.2020.10.035.
- Khalil-Allafi, J., A. Dlouhy, and G. Eggeler. 2002. “Ni4Ti3-precipitation During Aging of NiTi Shape Memory Alloys and its Influence on Martensitic Phase Transformations.” Acta Materialia 50 (17): 4255–4274.
- Kim, J., and S. Miyazaki. 2005. “Effect of Nano-Scaled Precipitates on Shape Memory Behavior of Ti-50.9at.%Ni Alloy.” Acta Materialia 53 (17): 4545–4554. https://doi.org/https://doi.org/10.1016/j.actamat.2005.06.009.
- Kou, S. 2002. “Welding Metallurgy, Second Edition”.
- Lee, Y. S., and W. Zhang. 2016. “Modeling of Heat Transfer, Fluid Flow and Solidification Microstructure of Nickel-Base Superalloy Fabricated by Laser Powder Bed Fusion.” Additive Manufacturing 12: 178–188. https://doi.org/https://doi.org/10.1016/j.addma.2016.05.003.
- Li, X. P., G. Ji, Z. Chen, A. Addad, Y. Wu, H. W. Wang, J. Vleugels, J. Van Humbeeck, and J. P. Kruth. 2017. “Selective Laser Melting of Nano-TiB2 Decorated AlSi10Mg Alloy with High Fracture Strength and Ductility.” Acta Materialia 129: 183–193. https://doi.org/https://doi.org/10.1016/j.actamat.2017.02.062.
- Li, B., B. Qian, Y. Xu, Z. Liu, J. Zhang, and F. Xuan. 2019. “Additive Manufacturing of Ultrafine-Grained Austenitic Stainless Steel Matrix Composite via Vanadium Carbide Reinforcement Addition and Selective Laser Melting: Formation Mechanism and Strengthening Effect.” Materials Science and Engineering: A 745: 495–508. https://doi.org/https://doi.org/10.1016/j.msea.2019.01.008.
- Lu, B., X. Cui, W. Ma, M. Dong, Y. Fang, X. Wen, G. Jin, and D. Zeng. 2020. “Promoting the Heterogeneous Nucleation and the Functional Properties of Directed Energy Deposited NiTi Alloy by Addition of La2O3.” Additive Manufacturing 33: 101150. https://doi.org/https://doi.org/10.1016/j.addma.2020.101150.
- Lu, H. Z., L. H. Liu, C. Yang, X. Luo, C. H. Song, Z. Wang, J. Wang, et al. 2022. “Simultaneous Enhancement of Mechanical and Shape Memory Properties by Heat-Treatment Homogenization of Ti2Ni Precipitates in TiNi Shape Memory Alloy Fabricated by Selective Laser Melting.” Journal of Materials Science & Technology 101: 205–216. https://doi.org/https://doi.org/10.1016/j.jmst.2021.06.019.
- Lu, H. Z., H. W. Ma, W. S. Cai, X. Luo, Z. Wang, C. H. Song, S. Yin, and C. Yang. 2021. “Stable Tensile Recovery Strain Induced by a Ni4Ti3 Nanoprecipitate in a Ni50.4Ti49.6 Shape Memory Alloy Fabricated via Selective Laser Melting.” Acta Materialia 219: 117261. https://doi.org/https://doi.org/10.1016/j.actamat.2021.117261.
- Lu, H. Z., C. Yang, X. Luo, H. W. Ma, B. Song, Y. Y. Li, and L. C. Zhang. 2019. “Ultrahigh-performance TiNi Shape Memory Alloy by 4D Printing.” Materials Science and Engineering: A 763: 138166. https://doi.org/https://doi.org/10.1016/j.msea.2019.138166.
- Luo, X., L. H. Liu, C. Yang, H. Z. Lu, H. W. Ma, Z. Wang, D. D. Li, L. C. Zhang, and Y. Y. Li. 2021. “Overcoming the Strength–Ductility Trade-off by Tailoring Grain-Boundary Metastable Si-Containing Phase in β-Type Titanium Alloy.” Journal of Materials Science & Technology 68: 112–123. https://doi.org/https://doi.org/10.1016/j.jmst.2020.06.053.
- Martin, J. H., B. D. Yahata, J. M. Hundley, J. A. Mayer, T. A. Schaedler, and T. M. Pollock. 2017. “3D Printing of High-Strength Aluminium Alloys.” Nature 549 (7672): 365–369. https://doi.org/https://doi.org/10.1038/nature23894.
- Moghaddam, S. N., S. Saedi, A. Amerinatanzi, A. Hinojos, A. Ramazani, J. Kundin, M. J. Mills, H. Karaca, and M. Elahinia. 2019. “Achieving Superelasticity in Additively Manufactured NiTi in Compression Without Post-Process Heat Treatment.” Scientific Reports 9 (1): 41. https://doi.org/https://doi.org/10.1038/s41598-018-36641-4.
- Nagarajan, R., and K. Chattopadhyay. 1994. “Intermetallic Ti2Ni/TiNi Nanocomposite by Rapid Solidification.” Acta Metallurgica et Materialia 42 (3): 947–958.
- Oliveira, J. P., A. J. Cavaleiro, N. Schell, A. Stark, R. M. Miranda, J. L. Ocana, and F. M. Braz Fernandes. 2018. “Effects of Laser Processing on the Transformation Characteristics of NiTi: A Contribute to Additive Manufacturing.” Scripta Materialia 152: 122–126. https://doi.org/https://doi.org/10.1016/j.scriptamat.2018.04.024.
- Oliveira, J. P., R. M. Miranda, and F. M. Braz Fernandes. 2017. “Welding and Joining of NiTi Shape Memory Alloys: A Review.” Progress in Materials Science 88: 412–466. https://doi.org/https://doi.org/10.1016/j.pmatsci.2017.04.008.
- Otsuka, K., and X. Ren. 2005. “Physical Metallurgy of Ti–Ni-Based Shape Memory Alloys.” Progress in Materials Science 50 (5): 511–678. https://doi.org/https://doi.org/10.1016/j.pmatsci.2004.10.001.
- Sam, J., B. Franco, J. Ma, I. Karaman, A. Elwany, and J. H. Mabe. 2018. “Tensile Actuation Response of Additively Manufactured Nickel-Titanium Shape Memory Alloys.” Scripta Materialia 146: 164–168. https://doi.org/https://doi.org/10.1016/j.scriptamat.2017.11.013.
- Tomozawa, M., H. Y. Kim, and S. Miyazaki. 2009. “Shape Memory Behavior and Internal Structure of Ti–Ni–Cu Shape Memory Alloy Thin Films and Their Application for Microactuators.” Acta Materialia 57 (2): 441–452. https://doi.org/https://doi.org/10.1016/j.actamat.2008.09.026.
- Toprek, D., J. Belosevic-Cavor, and V. Koteski. 2015. “Ab Initio Studies of the Structural, Elastic, Electronic and Thermal Properties of NiTi2 Intermetallic.” Journal of Physics and Chemistry of Solids 85: 197–205. https://doi.org/https://doi.org/10.1016/j.jpcs.2015.05.019.
- Verhaeghe, F., T. Craeghs, J. Heulens, and L. Pandelaers. 2009. “A Pragmatic Model for Selective Laser Melting with Evaporation.” Acta Materialia 57 (20): 6006–6012. https://doi.org/https://doi.org/10.1016/j.actamat.2009.08.027.
- Wagner, Martin F. X., and W. Windl. 2009. “Elastic Anisotropy of Ni4Ti3 from First Principles.” Scripta Materialia 60 (4): 207–210. https://doi.org/https://doi.org/10.1016/j.scriptamat.2008.09.028.
- Wang, X., S. Kustov, K. Li, D. Schryvers, B. Verlinden, and J. V. Humbeeck. 2015. “Effect of Nanoprecipitates on the Transformation Behavior and Functional Properties of a Ti–50.8 at.% Ni Alloy with Micron-Sized Grains.” Acta Materialia 82: 224–233. https://doi.org/https://doi.org/10.1016/j.actamat.2014.09.018
- Yan, W., Y. Qian, W. Ma, B. Zhou, Y. Shen, and F. Lin. 2017. “Modeling and Experimental Validation of the Electron Beam Selective Melting Process.” Engineering 3 (5): 701–707. https://doi.org/https://doi.org/10.1016/j.eng.2017.05.021.
- Zhang, B., J. Chen, and C. Coddet. 2013. “Microstructure and Transformation Behavior of in-situ Shape Memory Alloys by Selective Laser Melting Ti–Ni Mixed Powder.” Journal of Materials Science & Technology 29 (9): 863–867. https://doi.org/https://doi.org/10.1016/j.jmst.2013.05.006.
- Zhang, T., and C. Liu. 2022. “Design of titanium alloys by additive manufacturing: A critical review.” Advanced Powder Materials 1: 100014. doi: https://doi.org/10.1016/j.apmate.2021.11.001.
- Zhou, Q., M. D. Hayat, G. Chen, S. Cai, X. Qu, H. Tang, and P. Cao. 2019. “Selective Electron Beam Melting of NiTi: Microstructure, Phase Transformation and Mechanical Properties.” Materials Science and Engineering: A 744: 290–298. https://doi.org/https://doi.org/10.1016/j.msea.2018.12.023.