Metal droplet printing of tube with high-quality inner surface via helical printing trajectory and soluble support

References

• Amirzadeh, A., and S. Chandra. 2010. “Small Droplet Formation in a Pneumatic Drop-on-Demand Generator: Experiments and Analysis.” Experimental Thermal and Fluid Science 34 (8): 1488–1497.
   Web of Science ®Google Scholar
• Amirzadeh, A., M. Raessi, and S. Chandra. 2013. “Producing Molten Metal Droplets Smaller Than the Nozzle Diameter Using a Pneumatic Drop-on-Demand Generator.” Experimental Thermal and Fluid Science 47: 26–33.
   Web of Science ®Google Scholar
• Amirzadeh Goghari, A., and S. Chandra. 2007. “Producing Droplets Smaller Than the Nozzle Diameter by Using a Pneumatic Drop-on-Demand Droplet Generator.” Experiments in Fluids 44 (1): 105–114.
   Web of Science ®Google Scholar
• Cao, W., and Y. Miyamoto. 2006. “Freeform Fabrication of Aluminum Parts by Direct Deposition of Molten Aluminum.” Journal of Materials Processing Technology 173 (2): 209–212.
   Web of Science ®Google Scholar
• Chakraborty, D., B. Aneesh Reddy, and A. Roy Choudhury. 2008. “Extruder Path Generation for Curved Layer Fused Deposition Modeling.” Computer-Aided Design 40 (2): 235–243.
   Web of Science ®Google Scholar
• Chao, Y. P., L. H. Qi, Y. Xiao, J. Luo, and J. M. Zhou. 2012. “Manufacturing of Micro Thin-Walled Metal Parts by Micro-Droplet Deposition.” Journal of Materials Processing Technology 212 (2): 484–491.
   Web of Science ®Google Scholar
• Church, K. H., N. B. Crane, P. I. Deffenbaugh, T. P. Ketterl, C. G. Neff, P. B. Nesbitt, J. T. Nussbaum, et al. 2017. “Multimaterial and Multilayer Direct Digital Manufacturing of 3-d Structural Microwave Electronics.” Proceedings of the Ieee 105 (4): 688–701.
   Web of Science ®Google Scholar
• Dou, Y. B., J. Luo, L. H. Qi, H. C. Lian, and X. H. Hou. 2021. “Generation Mechanism and Suppression Method of Landing Error of two Successively Deposited Metal Droplets Caused by Coalescence and Solidification.” International Journal of Heat and Mass Transfer 172: 12.
   Web of Science ®Google Scholar
• Fang, M., S. Chandra, and C. B. Park. 2007. “Experiments on Remelting and Solidification of Molten Metal Droplets Deposited in Vertical Columns.” Journal of Manufacturing Science and Engineering 129 (2): 311–318.
   Web of Science ®Google Scholar
• Fang, M., S. Chandra, and C. B. Park. 2008. “Building Three-Dimensional Objects by Deposition of Molten Metal Droplets.” Rapid Prototyping Journal 14 (1): 44–52.
   Web of Science ®Google Scholar
• Fang, M., S. Chandra, and C. B. Park. 2009. “Heat Transfer During Deposition of Molten Aluminum Alloy Droplets to Build Vertical Columns.” Journal of Heat Transfer 131 (11): 7.
   Web of Science ®Google Scholar
• Goh, G. L., J. Ma, K. L. F. Chua, A. Shweta, W. Y. Yeong, and Y. P. Zhang. 2016. “Inkjet-printed Patch Antenna Emitter for Wireless Communication Application.” Virtual and Physical Prototyping 11 (4): 289–294.
   Web of Science ®Google Scholar
• Goh, G. L., H. Zhang, T. H. Chong, and W. Y. Yeong. 2021. “3d Printing of Multilayered and Multimaterial Electronics: A Review.” Advanced Electronic Materials 7: 10.
   Web of Science ®Google Scholar
• Grant, R. P., and S. Middleman. 1966. “Newtonian Jet Stability.” AIChE Journal 12 (4): 669–678.
   Web of Science ®Google Scholar
• Huang, J. D., L. J. Segura, T. J. Wang, G. L. Zhao, H. Y. Sun, and C. Zhou. 2020. “Unsupervised Learning for the Droplet Evolution Prediction and Process Dynamics Understanding in Inkjet Printing.” Additive Manufacturing 35: 11.
   Web of Science ®Google Scholar
• Kalkal, A., S. Kumar, P. Kumar, R. Pradhan, M. Willander, G. Packirisamy, S. Kumar, and B. D. Malhotra. 2021. “Recent Advances in 3d Printing Technologies for Wearable (bio)Sensors.” Additive Manufacturing 46: 102088.
   Web of Science ®Google Scholar
• Ko, Y. J., J. Yoon, J. Lee, and J. H. Han. 2013. “Effects of Cu Interlayer on the Wettability of Aluminum on Carbon.” Journal of Alloys and Compounds 574: 526–531.
   Web of Science ®Google Scholar
• Lee, T.-M., T. G. Kang, J.-S. Yang, J. Jo, K.-Y. Kim, B.-O. Choi, and D.-S. Kim. 2008. “Drop-on-demand Solder Droplet Jetting System for Fabricating Microstructure.” Ieee Transactions on Electronics Packaging Manufacturing 31 (3): 202–210.
   Google Scholar
• Lewis, J. A., and B. Y. Ahn. 2015. “Three-dimensional Printed Electronics.” Nature 518 (7537): 42–43.
   PubMed Web of Science ®Google Scholar
• Liu, M., H. Yi, H. Cao, R. Huang, and L. Jia. 2021. “Heat Accumulation Effect in Metal Droplet-Based 3d Printing: Evolution Mechanism and Elimination Strategy.” Additive Manufacturing 48: 102413.
   Web of Science ®Google Scholar
• Loulou, T., E. A. Artyukhin, and J. P. Bardon. 1999. “Estimation of Thermal Contact Resistance During the First Stages of Metal Solidification Process: I—Experiment Principle and Modelisation.” International Journal of Heat and Mass Transfer 42 (12): 2119–2127.
   Web of Science ®Google Scholar
• Luo, J., L. Qi, Y. Tao, Q. Ma, and C. W. Visser. 2016. “Impact-Driven Ejection of Micro Metal Droplets on-Demand.” International Journal of Machine Tools and Manufacture 106: 67–74.
   Web of Science ®Google Scholar
• Luo, Z., X. Wang, L. Wang, D. Sun, and Z. Li. 2017a. “Drop-on-Demand Electromagnetic Printing of Metallic Droplets.” Materials Letters 188: 184–187.
   Web of Science ®Google Scholar
• Luo, J., W. Wang, W. Xiong, H. Shen, and L. Qi. 2017b. “Formation of Uniform Metal Traces Using Alternate Droplet Printing.” International Journal of Machine Tools and Manufacture 122: 47–54.
   Web of Science ®Google Scholar
• Merrow, H., J. D. Beroz, K. H. Zhang, U. P. Muecke, and A. J. Hart. 2021. “Digital Metal Printing by Electrohydrodynamic Ejection and in-Flight Melting of Microparticles.” Additive Manufacturing 37: 101703.
   Web of Science ®Google Scholar
• Michel, F., H. Lockett, J. Ding, F. Martina, G. Marinelli, and S. Williams. 2019. “A Modular Path Planning Solution for Wire + Arc Additive Manufacturing.” Robotics and Computer-Integrated Manufacturing 60: 1–11.
   Web of Science ®Google Scholar
• Murr, L. E. 2016. “Frontiers of 3d Printing/Additive Manufacturing: From Human Organs to Aircraft Fabrication†.” Journal of Materials Science & Technology 32 (10): 987–995.
   Web of Science ®Google Scholar
• Murr, L. E., and W. L. Johnson. 2017. “3d Metal Droplet Printing Development and Advanced Materials Additive Manufacturing.” Journal of Materials Research and Technology 6 (1): 77–89.
   Google Scholar
• Plog, J., Y. Jiang, Y. Pan, and A. L. Yarin. 2020. “Electrostatic Charging and Deflection of Droplets for Drop-on-Demand 3d Printing Within Confinements.” Additive Manufacturing 36: 101400.
   Web of Science ®Google Scholar
• Qi, L.-H., Y.-P. Chao, J. Luo, J.-M. Zhou, X.-H. Hou, and H.-J. Li. 2012. “A Novel Selection Method of Scanning Step for Fabricating Metal Components Based on Micro-Droplet Deposition Manufacture.” International Journal of Machine Tools and Manufacture 56: 50–58.
   Web of Science ®Google Scholar
• Qi, L. H., Y. Hao, J. Luo, D. C. Zhang, and H. Shen. 2020. “Embedded Printing Trace Planning for Aluminum Droplets Depositing on Dissolvable Supports with Varying Section.” Robotics and Computer-Integrated Manufacturing 63: 10.
   Web of Science ®Google Scholar
• Qi, L.-H., S.-Y. Zhong, J. Luo, D.-C. Zhang, and H.-S. Zuo. 2015. “Quantitative Characterization and Influence of Parameters on Surface Topography in Metal Micro-Droplet Deposition Manufacture.” International Journal of Machine Tools and Manufacture 88: 206–213.
   Web of Science ®Google Scholar
• Saengchairat, N., T. Tran, and C.-K. Chua. 2017. “A Review: Additive Manufacturing for Active Electronic Components.” Virtual and Physical Prototyping 12 (1): 31–46.
   Web of Science ®Google Scholar
• Sakurada, S., M. Sole-Gras, K. Christensen, D. B. Wallace, and Y. Huang. 2020. “Liquid-absorbing System-Assisted Intersecting Jets Printing of Soft Structures from Reactive Biomaterials.” Additive Manufacturing 31: 100934.
   Web of Science ®Google Scholar
• Tan, H. W., T. Tran, and C. K. Chua. 2016. “A Review of Printed Passive Electronic Components Through Fully Additive Manufacturing Methods.” Virtual and Physical Prototyping 11 (4): 271–288.
   Web of Science ®Google Scholar
• Visser, C. W., R. Pohl, C. Sun, G. W. Romer, B. Huis, T. Veld, and D. Lohse. 2015. “Toward 3d Printing of Pure Metals by Laser-Induced Forward Transfer.” Advanced Materials 27 (27): 4087–4092.
   PubMed Web of Science ®Google Scholar
• Xia, L., S. Lin, and G. Ma. 2020. “Stress-based Tool-Path Planning Methodology for Fused Filament Fabrication.” Additive Manufacturing 32: 101020.
   Web of Science ®Google Scholar
• Xie, F., L. Chen, Z. Li, and K. Tang. 2020. “Path Smoothing and Feed Rate Planning for Robotic Curved Layer Additive Manufacturing.” Robotics and Computer-Integrated Manufacturing 65: 101967.
   Web of Science ®Google Scholar
• Yanpu, C. 2016. “A Novel Selection Method of Slice Thickness in Metal Micro-Droplet Deposition Manufacture.” Journal of Manufacturing Processes 21: 153–159.
   Web of Science ®Google Scholar
• Yi, H., L. H. Qi, J. Luo, Y. A. Guo, S. L. Li, and N. Li. 2018. “Elimination of Droplet Rebound off Soluble Substrate in Metal Droplet Deposition.” Materials Letters 216: 232–235.
   Web of Science ®Google Scholar
• Yi, H., L. Qi, J. Luo, and N. Li. 2019a. “Hole-defects in Soluble Core Assisted Aluminum Droplet Printing: Metallurgical Mechanisms and Elimination Methods.” Applied Thermal Engineering 148: 1183–1193.
   Web of Science ®Google Scholar
• Yi, H., L. H. Qi, J. Luo, D. C. Zhang, and N. Li. 2019b. “Direct Fabrication of Metal Tubes with High-Quality Inner Surfaces via Droplet Deposition Over Soluble Cores.” Journal of Materials Processing Technology 264: 145–154.
   Web of Science ®Google Scholar
• Yingxue, Y., G. Shengdong, and C. Chengsong. 2004. “Rapid Prototyping Based on Uniform Droplet Spraying.” Journal of Materials Processing Technology 146 (3): 389–395.
   Web of Science ®Google Scholar