A critical review of additive manufacturing technology in rehabilitation medicine via the use of visual knowledge graph

References

• Andelic, N., J. Lu, C. Gutenbrunner, B. Nugraha, M. Gormley, H. L. Søberg, U. Sveen, A. Anke, M. Kirkevold, and C. Røe. 2020. “Description of Health-Related Rehabilitation Service Provision and Delivery in Randomized Controlled Trials: A Topic Review.” Journal of Rehabilitation Medicine 52 (8): jrm00093.
   PubMed Web of Science ®Google Scholar
• Awad, A., F. Fina, S. J. Trenfield, P. Patel, A. Goyanes, S. Gaisford, and A. W. Basit. 2019. “3D Printed Pellets (Miniprintlets): A Novel,: Multi-Drug, Controlled Release Platform Technology.” Pharmaceutics 11 (4): 148. doi: 10.3390/pharmaceutics11040148
   PubMed Web of Science ®Google Scholar
• Azmir, J., I. S. M. Zaidul, M. M. Rahman, K. M. Sharif, A. Mohamed, F. Sahena, M. H. A. Jahurul, K. Ghafoor, N. A. N. Norulaini, and A. K. M. Omar. 2013. “Techniques for Extraction of Bioactive Compounds from Plant Materials: A Review.” Journal of Food Engineering 117 (4): 426–436. doi: 10.1016/j.jfoodeng.2013.01.014
   Web of Science ®Google Scholar
• Bose, S., S. Vahabzadeh, and A. Bandyopadhyay. 2013. “Bone Tissue Engineering Using 3D Printing.” Materials Today 16 (12): 496–504. doi: 10.1016/j.mattod.2013.11.017
   Web of Science ®Google Scholar
• Broutier, L., G. Mastrogiovanni, M. M. Verstegen, H. E. Francies, L. M. Gavarró, C. R. Bradshaw, G. E. Allen, et al. 2017. “Human Primary Liver Cancer–Derived Organoid Cultures for Disease Modeling and Drug Screening.” Nature Medicine 23 (12): 1424–1435. doi: 10.1038/nm.4438
   PubMed Web of Science ®Google Scholar
• Bud, E. S., V. I. Bocanet, M. H. Muntean, A. Vlasa, S. M. Bucur, M. Păcurar, B. R. Dragomir, C. D. Olteanu, and A. Bud. 2021. “Accuracy of Three-Dimensional (3D) Printed Dental Digital Models Generated with Three Types of Resin Polymers by Extra-Oral Optical Scanning.” Journal of Clinical Medicine 10 (9): 1908. doi: 10.3390/jcm10091908
   PubMed Web of Science ®Google Scholar
• Chaparro-Cárdenas, S. L., A. A. Lozano-Guzmán, J. A. Ramirez-Bautista, and A. Hernández-Zavala. 2018. “A Review in Gait Rehabilitation Devices and Applied Control Techniques.” Disability and Rehabilitation: Assistive Technology 13 (8): 819–834.
   PubMed Web of Science ®Google Scholar
• Chen, C. 2006. “CiteSpace II: Detecting and Visualizing Emerging Trends and Transient Patterns in Scientific Literature.” Journal of the American Society for Information Science and Technology 57 (3): 359–377. doi: 10.1002/asi.20317
   Web of Science ®Google Scholar
• Chen, C. 2012. “Predictive Effects of Structural Variation on Citation Counts.” Journal of the American Society for Information Science and Technology 63 (3): 431–449. doi: 10.1002/asi.21694
   Web of Science ®Google Scholar
• Chen, C. 2017. “Science Mapping: A Systematic Review of the Literature.” Journal of Data and Information Science 2: 1–40. doi: 10.1515/jdis-2017-0006
   Web of Science ®Google Scholar
• Chen, C., and L. Leydesdorff. 2014. “Patterns of Connections and Movements in Dual-map Overlays: A new Method of Publication Portfolio Analysis.” Journal of the Association for Information Science and Technology 65 (2): 334–351. doi: 10.1002/asi.22968
   Web of Science ®Google Scholar
• Chen, C., and M. Song. 2019. “Visualizing a Field of Research: A Methodology of Systematic Scientometric Reviews.” PLOS ONE 14 (10): e0223994.
   Web of Science ®Google Scholar
• Correia, S. I., H. Pereira, J. Silva-Correia, C. N. Van Dijk, J. Espregueira-Mendes, J. M. Oliveira, and R. L. Reis. 2014. “Current Concepts: Tissue Engineering and Regenerative Medicine Applications in the Ankle Joint.” Journal of The Royal Society Interface 11 (92): 20130784. doi: 10.1098/rsif.2013.0784
   PubMed Web of Science ®Google Scholar
• de Carvalho Filho, I. F. P., F. O. Medola, F. E. Sandnes, and L. C. Paschoarelli. 2020. “Manufacturing Technology in Rehabilitation Practice: Implications for Its Implementation in Assistive Technology Production.” In Advances in Additive Manufacturing, Modeling Systems and 3D Prototyping, edited by M. Di Nicolantonio, E. Rossi, and T. Alexander, 328–336. Cham: Springer International Publishing.
   Google Scholar
• Dohan Ehrenfest, D. M., N. R. Pinto, A. Pereda, P. Jiménez, M. D. Corso, B.-S. Kang, M. Nally, N. Lanata, H.-L. Wang, and M. Quirynen. 2018. “The Impact of the Centrifuge Characteristics and Centrifugation Protocols on the Cells,: Growth Factors, and Fibrin Architecture of a Leukocyte- and Platelet-Rich Fibrin (L-PRF) Clot and Membrane.” Platelets 29 (2): 171–184. doi: 10.1080/09537104.2017.1293812
   PubMed Web of Science ®Google Scholar
• Dumitrescu, I.-B., D. Lupuleasa, C. M. Dragoi, A. Nicolae, A. Pop, G. Șaramet, and D. Draganescu. 2018. “The Age of Pharmaceutical 3D Printing. Technological and Therapeutical Implications of Additive Manufacturing.” Farmacia 66 (3): 365–389.
   Google Scholar
• Giacino, J. T., D. I. Katz, N. D. Schiff, J. Whyte, E. J. Ashman, S. Ashwal, R. Barbano, et al. 2018. “Practice Guideline Update Recommendations Summary: Disorders of Consciousness: Report of the Guideline Development,: Dissemination, and Implementation Subcommittee of the American Academy of Neurology; the American Congress of Rehabilitation Medicine; and the National Institute on Disability, Independent Living, and Rehabilitation Research.” Neurology 91 (10): 450–460. doi: 10.1212/WNL.0000000000005926
   PubMed Web of Science ®Google Scholar
• Grayson, W. L., B. A. Bunnell, E. Martin, T. Frazier, B. P. Hung, and J. M. Gimble. 2015. “Stromal Cells and Stem Cells in Clinical Bone Regeneration.” Nature Reviews Endocrinology 11 (3): 140–150. doi: 10.1038/nrendo.2014.234
   PubMed Web of Science ®Google Scholar
• Han, Q., C. Wang, H. Chen, X. Zhao, and J. Wang. 2019. “Porous Tantalum and Titanium in Orthopedics: A Review.” ACS Biomaterials Science & Engineering 5 (11): 5798–5824. doi: 10.1021/acsbiomaterials.9b00493
   PubMed Web of Science ®Google Scholar
• Hou, J., X. Yang, and C. Chen. 2018. “Emerging Trends and New Developments in Information Science: A Document co-Citation Analysis (2009–2016).” Scientometrics 115 (2): 869–892. doi: 10.1007/s11192-018-2695-9
   Web of Science ®Google Scholar
• Kim, M. C., and C. Chen. 2015. “A Scientometric Review of Emerging Trends and new Developments in Recommendation Systems.” Scientometrics 104 (1): 239–263. doi: 10.1007/s11192-015-1595-5
   Web of Science ®Google Scholar
• Li, Y., C. Yang, H. Zhao, S. Qu, X. Li, and Y. Li. 2014. “New Developments of Ti-Based Alloys for Biomedical Applications.” Materials 7 (3): 1709–1800. doi: 10.3390/ma7031709
   PubMed Web of Science ®Google Scholar
• Mauritz, K. H. 1996. “Rehabilitation - Concepts and Definitions.” Nervenheilkunde 15 (4): 184–189.
   Google Scholar
• Melchels, F. P. W., M. A. N. Domingos, T. J. Klein, J. Malda, P. J. Bartolo, and D. W. Hutmacher. 2012. “Additive Manufacturing of Tissues and Organs.” Progress in Polymer Science 37 (8): 1079–1104. doi: 10.1016/j.progpolymsci.2011.11.007
   Web of Science ®Google Scholar
• Moon, H.-J., K.-N. Kim, K.-M. Kim, S.-H. Choi, C.-K. Kim, K.-D. Kim, R. Z. LeGeros, and Y.-K. Lee. 2005. “Bone Formation in Calvarial Defects of Sprague-Dawley Rats by Transplantation of Calcium Phosphate Glass.” Journal of Biomedical Materials Research Part A 74A (3): 497–502. doi: 10.1002/jbm.a.30408
   Web of Science ®Google Scholar
• Mukome, F. N. D., X. Zhang, L. C. R. Silva, J. Six, and S. J. Parikh. 2013. “Use of Chemical and Physical Characteristics To Investigate Trends in Biochar Feedstocks.” Journal of Agricultural and Food Chemistry 61 (9): 2196–2204. doi: 10.1021/jf3049142
   PubMed Web of Science ®Google Scholar
• Murphy, S. V., and A. Atala. 2014. “3D Bioprinting of Tissues and Organs.” Nature Biotechnology 32 (8): 773–785. doi: 10.1038/nbt.2958
   PubMed Web of Science ®Google Scholar
• Ngo, T. D., A. Kashani, G. Imbalzano, K. T. Q. Nguyen, and D. Hui. 2018. “Additive Manufacturing (3D Printing): A Review of Materials,: Methods, Applications and Challenges.” Composites Part B: Engineering 143: 172–196. doi: 10.1016/j.compositesb.2018.02.012
   Web of Science ®Google Scholar
• Oliveira, J. P., A. D. LaLonde, and J. Ma. 2020. “Processing Parameters in Laser Powder bed Fusion Metal Additive Manufacturing.” Materials & Design 193: 108762. doi: 10.1016/j.matdes.2020.108762
   Web of Science ®Google Scholar
• Palazzi, V., A. Cicioni, F. Alimenti, P. Mezzanotte, M. M. Tentzeris, and L. Roselli. 2021. “Compact 3-D-Printed 4 × 4 Butler Matrix Based on Low-Cost and Curing-Free Additive Manufacturing.” IEEE Microwave and Wireless Components Letters 31 (2): 125–128. doi: 10.1109/LMWC.2020.3041569
   Web of Science ®Google Scholar
• Silva, M., R. Felismina, A. Mateus, P. Parreira, and C. Malça. 2017. “Application of a Hybrid Additive Manufacturing Methodology to Produce a Metal/Polymer Customized Dental Implant.” Procedia Manufacturing 12: 150–155. doi: 10.1016/j.promfg.2017.08.019
   Google Scholar
• Steele, B. G., B. Belza, K. Cain, C. Warms, J. Coppersmith, and J. Howard. 2003. “Bodies in Motion: Monitoring Daily Activity and Exercise with Motion Sensors in People with Chronic Pulmonary Disease.” The Journal of Rehabilitation Research and Development 40 (5s): 45. doi: 10.1682/JRRD.2003.10.0045
   PubMedGoogle Scholar
• Stephens-Fripp, B., M. Jean Walker, E. Goddard, and G. Alici. 2020. “A Survey on What Australians with Upper Limb Difference Want in a Prosthesis: Justification for Using Soft Robotics and Additive Manufacturing for Customized Prosthetic Hands.” Disability and Rehabilitation: Assistive Technology 15 (3): 342–349.
   PubMed Web of Science ®Google Scholar
• Tacconelli, E., E. Carrara, A. Savoldi, S. Harbarth, M. Mendelson, D. L. Monnet, C. Pulcini, et al. 2018. “Discovery, Research, and Development of new Antibiotics: The WHO Priority List of Antibiotic-Resistant Bacteria and Tuberculosis.” The Lancet Infectious Diseases 18 (3): 318–327. doi: 10.1016/S1473-3099(17)30753-3
   PubMed Web of Science ®Google Scholar
• Taniguchi, N., S. Fujibayashi, M. Takemoto, K. Sasaki, B. Otsuki, T. Nakamura, T. Matsushita, T. Kokubo, and S. Matsuda. 2016. “Effect of Pore Size on Bone Ingrowth Into Porous Titanium Implants Fabricated by Additive Manufacturing: An in Vivo Experiment.” Materials Science and Engineering: C 59: 690–701. doi: 10.1016/j.msec.2015.10.069
   PubMed Web of Science ®Google Scholar
• Taylor, C. S., P. Cherkas, H. Hampton, J. J. Frantzen, B. O. Shah, W. B. Tiffany, L. Nanis, P. Booker, A. Salahieh, and R. Hansen. 1995. ‘Spatial Forming’ - A Three Dimensional Printing Process. In: Proceedings IEEE Micro Electro Mechanical Systems. 1995. Presented at the Proceedings IEEE Micro Electro Mechanical Systems, 1995, 203.
   Google Scholar
• Thomas, D. J., M. A. B. M. Azmi, and Z. Tehrani. 2014. “3D Additive Manufacture of Oral and Maxillofacial Surgical Models for Preoperative Planning.” The International Journal of Advanced Manufacturing Technology 71 (9): 1643–1651. doi: 10.1007/s00170-013-5587-4
   Web of Science ®Google Scholar
• Tran, H. T. T., H. T. T. Le, H. T. P. Tran, D. T. K. Khu, H. Lagercrantz, D. M. Tran, B. Winbladh, L. Hellström-Westas, T. Alfvén, and L. Olson. 2021. “Hypothermic Treatment for Neonatal Asphyxia in low-Resource Settings Using Phase-Changing Material—An Easy to use and low-Cost Method.” Acta Paediatrica 110 (1): 85–93. doi: 10.1111/apa.15331
   PubMed Web of Science ®Google Scholar
• Valtonen, T., S. López-Pernas, M. Saqr, H. Vartiainen, E. Sointu, and M. Tedre. 2022. “The Nature and Building Blocks of Educational Technology Research.” Computers in Human Behavior 128: 107123. doi: 10.1016/j.chb.2021.107123
   Web of Science ®Google Scholar
• van Eck, N. J., and L. Waltman. 2017. “Citation-based Clustering of Publications Using CitNetExplorer and VOSviewer.” Scientometrics 111 (2): 1053–1070. doi: 10.1007/s11192-017-2300-7
   PubMed Web of Science ®Google Scholar
• Ventola, C. L. 2014. “Medical Applications for 3D Printing: Current and Projected Uses.” P & T: A Peer-Reviewed Journal for Formulary Management 39 (10): 704–711.
   PubMedGoogle Scholar
• Wei, D., Q. Meng, and D. Jia. 2007. “Microstructure of Hot-Pressed h-BN/Si3N4 Ceramic Composites with Y2O3–Al2O3 Sintering Additive.” Ceramics International 33 (2): 221–226. doi: 10.1016/j.ceramint.2005.09.004
   Web of Science ®Google Scholar
• Xia, D.-M., X.-R. Wang, P.-Y. Zhou, T.-L. Ou, L. Su, and S.-G. Xu. 2021. “Research Progress of Heat Stroke During 1989-2019: A Bibliometric Analysis.” Military Medical Research 8(5): 2–11. doi: 10.1186/s40779-021-00300-z
   Web of Science ®Google Scholar
• Zhang, X., S. Wang, L. Xu, L. Feng, Y. Ji, L. Tao, S. Li, and Y. Wei. 2012. “Biocompatible Polydopamine Fluorescent Organic Nanoparticles: Facile Preparation and Cell Imaging.” Nanoscale 4 (18): 5581–5584. doi: 10.1039/c2nr31281f
   PubMed Web of Science ®Google Scholar