Characterisation of in-situ alloyed titanium-tantalum lattice structures by laser powder bed fusion using finite element analysis

References

• Al-Maharma, A. Y., S. P. Patil, and B. Markert. 2020. “Effects of Porosity on the Mechanical Properties of Additively Manufactured Components: A Critical Review.” Materials Research Express 7 (12): 122001. doi: 10.1088/2053-1591/abcc5d
   Web of Science ®Google Scholar
• Attarilar, S., M. Ebrahimi, F. Djavanroodi, Y. Fu, L. Wang, and J. Yang. 2020. “3D Printing Technologies in Metallic Implants: A Thematic Review on the Techniques and Procedures.” International Journal of Bioprinting 7 (1): 306.
   PubMed Web of Science ®Google Scholar
• Choy, S. Y., C.-N. Sun, W. J. Sin, K. F. Leong, P.-C. Su, J. Wei, and P. Wang. 2021. “Superior Energy Absorption of Continuously Graded Microlattices by Electron Beam Additive Manufacturing.” Virtual and Physical Prototyping 16 (1): 14–28. doi: 10.1080/17452759.2020.1868656
   Web of Science ®Google Scholar
• Daskalakis, E., F. Liu, B. Huang, A. A. Acar, G. Cooper, A. Weightman, G. Blunn, B. Koç, and P. Bartolo. 2021. “Investigating the Influence of Architecture and Material Composition of 3D Printed Anatomical Design Scaffolds for Large Bone Defects.” International Journal of Bioprinting 7 (2): 268. doi: 10.18063/ijb.v7i2.268
   PubMed Web of Science ®Google Scholar
• Echeta, I., B. Dutton, R. K. Leach, and S. Piano. 2021. “Finite Element Modelling of Defects in Additively Manufactured Strut-Based Lattice Structures.” Additive Manufacturing 47: 102301. doi: 10.1016/j.addma.2021.102301
   Web of Science ®Google Scholar
• Echeta, I., X. Feng, B. Dutton, R. Leach, and S. Piano. 2020. “Review of Defects in Lattice Structures Manufactured by Powder bed Fusion.” The International Journal of Advanced Manufacturing Technology 106 (5): 2649–2668. doi: 10.1007/s00170-019-04753-4
   Web of Science ®Google Scholar
• Egan, P. F., V. C. Gonella, M. Engensperger, S. J. Ferguson, and K. Shea. 2017. “Computationally Designed Lattices with Tuned Properties for Tissue Engineering Using 3D Printing.” PloS one 12 (8): e0182902. doi: 10.1371/journal.pone.0182902
   PubMed Web of Science ®Google Scholar
• Galy, C., E. Le Guen, E. Lacoste, and C. Arvieu. 2018. “Main Defects Observed in Aluminum Alloy Parts Produced by SLM: From Causes to Consequences.” Additive Manufacturing 22: 165–175. doi: 10.1016/j.addma.2018.05.005
   Web of Science ®Google Scholar
• Gibbson, L., and M. Ashby. 1997. Cellular Solid: Structure and Properties. New York: Cambridge Univ. Press.
   Google Scholar
• Gong, H., K. Rafi, H. Gu, T. Starr, and B. Stucker. 2014. “Analysis of Defect Generation in Ti–6Al–4V Parts Made Using Powder bed Fusion Additive Manufacturing Processes.” Additive Manufacturing 1-4: 87–98. doi: 10.1016/j.addma.2014.08.002
   Google Scholar
• Han, Y., and W. F. Lu. 2018. “A Novel Design Method for Nonuniform Lattice Structures Based on Topology Optimization.” Journal of Mechanical Design 140 (9): 091403. doi: 10.1115/1.4040546
   Web of Science ®Google Scholar
• He, G., M. Zhang, and Z. Song. 2015. “Error Evaluation of Free-Form Surface Based on Distance Function of Measured Point to Surface.” Computer-Aided Design 65: 11–17. doi: 10.1016/j.cad.2015.02.004
   Web of Science ®Google Scholar
• Helou, M., and S. Kara. 2018. “Design, Analysis and Manufacturing of Lattice Structures: An Overview.” International Journal of Computer Integrated Manufacturing 31 (3): 243–261. doi: 10.1080/0951192X.2017.1407456
   Web of Science ®Google Scholar
• Hu, E., I. P. Seetoh, and C. Q. Lai. 2022. “Machine Learning Assisted Investigation of Defect Influence on the Mechanical Properties of Additively Manufactured Architected Materials.” International Journal of Mechanical Sciences 221: 107190. doi: 10.1016/j.ijmecsci.2022.107190
   Web of Science ®Google Scholar
• Hughes, T. J. The Finite Element Method: Linear Static and Dynamic Finite Element Analysis: Courier Corporation; 2012.
   Google Scholar
• Kang, N., P. Coddet, L. Dembinski, H. Liao, and C. Coddet. 2017. “Microstructure and Strength Analysis of Eutectic Al-Si Alloy in-Situ Manufactured Using Selective Laser Melting from Elemental Powder Mixture.” Journal of Alloys and Compounds 691: 316–322. doi: 10.1016/j.jallcom.2016.08.249
   Web of Science ®Google Scholar
• Knieps, M. S., W. J. Reynolds, J. Dejaune, A. T. Clare, and A. Evirgen. 2021. “In-situ Alloying in Powder bed Fusion: The Role of Powder Morphology.” Materials Science and Engineering: A 807: 140849. doi: 10.1016/j.msea.2021.140849
   Web of Science ®Google Scholar
• Kuo, C., C. Chua, P. Peng, Y. Chen, S. Sing, S. Huang, and Y. L. Su. 2020. “Microstructure Evolution and Mechanical Property Response via 3D Printing Parameter Development of Al–Sc Alloy.” Virtual and Physical Prototyping 15 (1): 120–129. doi: 10.1080/17452759.2019.1698967
   Web of Science ®Google Scholar
• Lei, H., C. Li, J. Meng, H. Zhou, Y. Liu, X. Zhang, P. Wang, and D. Fang. 2019. “Evaluation of Compressive Properties of SLM-Fabricated Multi-Layer Lattice Structures by Experimental Test and μ-CT-Based Finite Element Analysis.” Materials & Design 169: 107685. doi: 10.1016/j.matdes.2019.107685
   Web of Science ®Google Scholar
• Li, C., H. Lei, Y. Liu, X. Zhang, J. Xiong, H. Zhou, and D. Fang. 2018a. “Crushing Behavior of Multi-Layer Metal Lattice Panel Fabricated by Selective Laser Melting.” International Journal of Mechanical Sciences 145: 389–399. doi: 10.1016/j.ijmecsci.2018.07.029
   Web of Science ®Google Scholar
• Li, D., W. Liao, N. Dai, G. Dong, Y. Tang, and Y. M. Xie. 2018b. “Optimal Design and Modeling of Gyroid-Based Functionally Graded Cellular Structures for Additive Manufacturing.” Computer-Aided Design 104: 87–99. doi: 10.1016/j.cad.2018.06.003
   Web of Science ®Google Scholar
• Lozanovski, B., D. Downing, P. Tran, D. Shidid, M. Qian, P. Choong, M. Brandt, and M. Leary. 2020. “A Monte Carlo Simulation-Based Approach to Realistic Modelling of Additively Manufactured Lattice Structures.” Additive Manufacturing 32: 101092. doi: 10.1016/j.addma.2020.101092
   Web of Science ®Google Scholar
• Maconachie, T., M. Leary, B. Lozanovski, X. Zhang, M. Qian, O. Faruque, and M. Brandt. 2019. “SLM Lattice Structures: Properties, Performance, Applications and Challenges.” Materials & Design 183: 108137. doi: 10.1016/j.matdes.2019.108137
   Web of Science ®Google Scholar
• Mancusi, G., F. Fabbrocino, L. Feo, and F. Fraternali. 2017. “Size Effect and Dynamic Properties of 2D Lattice Materials.” Composites Part B: Engineering 112: 235–242. doi: 10.1016/j.compositesb.2016.12.026
   Web of Science ®Google Scholar
• Mazza, E., and A. E. Ehret. 2015. “Mechanical Biocompatibility of Highly Deformable Biomedical Materials.” Journal of the Mechanical Behavior of Biomedical Materials 48: 100–124. doi: 10.1016/j.jmbbm.2015.03.023
   PubMed Web of Science ®Google Scholar
• Riva, L., P. S. Ginestra, and E. Ceretti. 2021. “Mechanical Characterization and Properties of Laser-Based Powder bed–Fused Lattice Structures: A Review.” The International Journal of Advanced Manufacturing Technology 113 (3): 649–671. doi: 10.1007/s00170-021-06631-4
   Web of Science ®Google Scholar
• Simonelli, M., N. T. Aboulkhair, P. Cohen, J. W. Murray, A. T. Clare, C. Tuck, and R. J. M. Hague. 2018. “A Comparison of Ti-6Al-4V in-Situ Alloying in Selective Laser Melting Using Simply-Mixed and Satellited Powder Blend Feedstocks.” Materials Characterization 143: 118–126. doi: 10.1016/j.matchar.2018.05.039
   Web of Science ®Google Scholar
• Sindinger, S.-L., D. Marschall, C. Kralovec, and M. Schagerl. 2021. “Material Modelling and Property Mapping for Structural FEA of Thin-Walled Additively Manufactured Components.” Virtual and Physical Prototyping 16 (1): 97–112. doi: 10.1080/17452759.2020.1824427
   Web of Science ®Google Scholar
• Sing, S. L. 2022. “Perspectives on Additive Manufacturing Enabled Beta-Titanium Alloys for Biomedical Applications.” International Journal of Bioprinting 8 (1): 478. doi: 10.18063/ijb.v8i1.478
   PubMed Web of Science ®Google Scholar
• Sing, S. L., S. Huang, G. D. Goh, G. L. Goh, C. F. Tey, J. H. K. Tan, and W. Y. Yeong. 2021. “Emerging Metallic Systems for Additive Manufacturing: In-Situ Alloying and Multi-Metal Processing in Laser Powder bed Fusion.” Progress in Materials Science 119: 100795. doi: 10.1016/j.pmatsci.2021.100795
   Web of Science ®Google Scholar
• Sing, S., C. Kuo, C. Shih, C. Ho, and C. Chua. 2021. “Perspectives of Using Machine Learning in Laser Powder bed Fusion for Metal Additive Manufacturing.” Virtual and Physical Prototyping 16 (3): 372–386. doi: 10.1080/17452759.2021.1944229
   Web of Science ®Google Scholar
• Sing, S. L., F. E. Wiria, and W. Y. Yeong. 2018. “Selective Laser Melting of Lattice Structures: A Statistical Approach to Manufacturability and Mechanical Behavior.” Robotics and Computer-Integrated Manufacturing 49: 170–180. doi: 10.1016/j.rcim.2017.06.006
   Web of Science ®Google Scholar
• Sun, J., M. Guo, K. Shi, and D. Gu. 2022. “Influence of Powder Morphology on Laser Absorption Behavior and Printability of Nanoparticle-Coated 90W-Ni-Fe Powder During Laser Powder bed Fusion.” Materials Science in Additive Manufacturing 1 (2): 11. doi: 10.18063/msam.v1i2.11
   Google Scholar
• Sun, Q., K. Guo, X. Wang, J. Liu, and J. Sun. 2020. “Effect of Scanning Strategies on the Microstructure and Mechanical Behavior of 316L Stainless Steel Fabricated by Selective Laser Melting.” Materials Science and Engineering: A 793: 139879. doi: 10.1016/j.msea.2020.139879
   Web of Science ®Google Scholar
• Uhlířová, T., and W. Pabst. 2019. “Conductivity and Young's Modulus of Porous Metamaterials Based on Gibson-Ashby Cells.” Scripta Materialia 159: 1–4. doi: 10.1016/j.scriptamat.2018.09.005
   Web of Science ®Google Scholar
• Yan, J., W.-B. Hu, Z.-H. Wang, and Z.-Y. Duan. 2014. “Size Effect of Lattice Material and Minimum Weight Design.” Acta Mechanica Sinica 30 (2): 191–197. doi: 10.1007/s10409-014-0001-5
   Web of Science ®Google Scholar
• Yin, J., W. Zhang, L. Ke, H. Wei, D. Wang, L. Yang, H. Zhu, P. Dong, G. Wang, and Z. Zeng. 2021. “Vaporization of Alloying Elements and Explosion Behavior During Laser Powder bed Fusion of Cu–10Zn Alloy.” International Journal of Machine Tools and Manufacture 161: 103686. doi: 10.1016/j.ijmachtools.2020.103686
   Web of Science ®Google Scholar
• Yoder, M., L. Thompson, and J. Summers. 2018. “Size Effects in Lattice Structures and a Comparison to Micropolar Elasticity.” International Journal of Solids and Structures 143: 245–261. doi: 10.1016/j.ijsolstr.2018.03.013
   Web of Science ®Google Scholar
• Yu, W., Z. Xiao, X. Zhang, Y. Sun, P. Xue, S. Tan, Y. Wu, and H. Zheng. 2022. “Processing and Characterization of Crack-Free 7075 Aluminum Alloys with Elemental Zr Modification by Laser Powder bed Fusion.” Materials Science in Additive Manufacturing 1 (1): 4. doi: 10.18063/msam.v1i1.4
   Google Scholar
• Zhang, Y., S. Attarilar, L. Wang, W. Lu, J. Yang, and Y. Fu. 2021. “A Review on Design and Mechanical Properties of Additively Manufactured NiTi Implants for Orthopedic Applications.” International Journal of Bioprinting 7 (2): 340. doi: 10.18063/ijb.v7i2.340
   PubMed Web of Science ®Google Scholar
• Zhang, J., H. Huang, G. Liu, H. Zong, and C. Zhang. 2021. “Stiffness and Energy Absorption of Additive Manufactured Hybrid Lattice Structures.” Virtual and Physical Prototyping 16 (4): 428–443. doi: 10.1080/17452759.2021.1954405
   Web of Science ®Google Scholar
• Zhang, B., Y. Li, and Q. Bai. 2017. “Defect Formation Mechanisms in Selective Laser Melting: A Review.” Chinese Journal of Mechanical Engineering 30 (3): 515–527. doi: 10.1007/s10033-017-0121-5
   Web of Science ®Google Scholar
• Zhang, J., Y. Shen, Y. Sun, J. Yang, Y. Gong, K. Wang, Z. Zhang, X. Chen, and L. Bai. 2022. “Design and Mechanical Testing of Porous Lattice Structure with Independent Adjustment of Pore Size and Porosity for Bone Implant.” Journal of Materials Research and Technology 18: 3240–3255. doi: 10.1016/j.jmrt.2022.04.002
   Google Scholar
• Ziaja, W. 2009. “Finite Element Modelling of the Fracture Behaviour of Surface Treated Ti-6Al-4V Alloy.” Computational Materials Science and Surface Engineering 16: 17.
   Google Scholar