Advanced search
Publication Cover
Virtual and Physical Prototyping Volume 18, 2023 - Issue 1
Submit an article Journal homepage
1,568
Views
6
CrossRef citations to date
0
Altmetric
Research Article

Preparation of iron oxide–coated aramid fibres for improving the mechanical performance and flame retardancy of multi jet fusion–printed polyamide 12 composites

Yanbei Houa HP-NTU Digital Manufacturing Corporate Lab, School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore, Singapore;b Singapore Centre for 3D Printing, School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore, SingaporeView further author information
,
Ming Gaoa HP-NTU Digital Manufacturing Corporate Lab, School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore, Singapore;b Singapore Centre for 3D Printing, School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore, SingaporeView further author information
,
Jiayao Chena HP-NTU Digital Manufacturing Corporate Lab, School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore, Singapore;b Singapore Centre for 3D Printing, School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore, SingaporeView further author information
,
Wei Shian Teya HP-NTU Digital Manufacturing Corporate Lab, School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore, Singapore;b Singapore Centre for 3D Printing, School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore, SingaporeView further author information
,
Mei Chena HP-NTU Digital Manufacturing Corporate Lab, School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore, Singapore;b Singapore Centre for 3D Printing, School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore, SingaporeView further author information
,
Han Zhengb Singapore Centre for 3D Printing, School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore, SingaporeView further author information
,
Boyuan Lib Singapore Centre for 3D Printing, School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore, SingaporeORCID Iconhttps://orcid.org/0000-0002-2840-3501View further author information
ORCID Icon,
Lihua Zhaoa HP-NTU Digital Manufacturing Corporate Lab, School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore, Singapore;c 3D Lab, HP Labs, HP Inc., Palo Alto, CA, USAView further author information
&
Kun Zhoua HP-NTU Digital Manufacturing Corporate Lab, School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore, Singapore;b Singapore Centre for 3D Printing, School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore, SingaporeCorrespondence[email protected]
ORCID Iconhttps://orcid.org/0000-0001-7660-2911View further author information
ORCID Icon show all
Article: e2171892 | Received 30 Nov 2022, Accepted 19 Jan 2023, Published online: 09 Feb 2023

References

  • Amado, A., Manfred Schmid, Gideon Levy, and Konrad Wegener. 2011. “Advances in SLS Powder Characterization.” Paper Presented at the 2011 International Solid Freeform Fabrication Symposium.
  • Awad, Atheer, Fabrizio Fina, Alvaro Goyanes, Simon Gaisford, and Abdul W. Basit. 2021. “Advances in Powder Bed Fusion 3D Printing in Drug Delivery and Healthcare.” Advanced Drug Delivery Reviews 174: 406–424. doi:10.1016/j.addr.2021.04.025.
  • Cai, Chao, Wei Shian Tey, Jiayao Chen, Wei Zhu, Xingjian Liu, Tong Liu, Lihua Zhao, and Kun Zhou. 2021. “Comparative Study on 3D Printing of Polyamide 12 by Selective Laser Sintering and Multi jet Fusion.” Journal of Materials Processing Technology 288: 116882. doi:10.1016/j.jmatprotec.2020.116882.
  • Can, Musa Mutlu, Sadan Ozcan, Abdullah Ceylan, and Tezer Firat. 2010. “Effect of Milling Time on the Synthesis of Magnetite Nanoparticles by Wet Milling.” Materials Science and Engineering: B 172 (1): 72–75. doi:10.1016/j.mseb.2010.04.019.
  • Chatham, Camden A, Timothy E Long, and Christopher B Williams. 2019. “A Review of the Process Physics and Material Screening Methods for Polymer Powder bed Fusion Additive Manufacturing.” Progress in Polymer Science 93: 68–95. doi:10.1016/j.progpolymsci.2019.03.003.
  • Chen, Jiayao, Pengfei Tan, Xiaojiang Liu, Wei Shian Tey, Adrian Ong, Lihua Zhao, and Kun Zhou. 2022a. “High-strength Light-Weight Aramid Fibre/Polyamide 12 Composites Printed by Multi Jet Fusion.” Virtual and Physical Prototyping 17 (2): 295–307. doi:10.1080/17452759.2022.2036931.
  • Chen, Jiayao, Lihua Zhao, and Kun Zhou. 2022b. “Improvement in the Mechanical Performance of Multi Jet Fusion–Printed Aramid Fiber/Polyamide 12 Composites by Fiber Surface Modification.” Additive Manufacturing 51: 102576. doi:10.1016/j.addma.2021.102576.
  • Chen, Jianrui, Yaofeng Zhu, Qingqing Ni, Yaqin Fu, and Xiang Fu. 2014. “Surface Modification and Characterization of Aramid Fibers with Hybrid Coating.” Applied Surface Science 321: 103–108. doi:10.1016/j.apsusc.2014.09.196.
  • Chen, Hui, Wei Zhu, Haibin Tang, and Wentao Yan. 2021. “Oriented Structure of Short Fiber Reinforced Polymer Composites Processed by Selective Laser Sintering: The Role of Powder-Spreading Process.” International Journal of Machine Tools and Manufacture 163: 103703. doi:10.1016/j.ijmachtools.2021.103703.
  • Dickson, Andrew N., Hisham M. Abourayana, and Denis P. Dowling. 2020. “3D Printing of Fibre-Reinforced Thermoplastic Composites Using Fused Filament Fabrication—A Review.” Polymers 12 (10): 2188. doi:10.3390/polym12102188.
  • Ehlert, Gregory J., and Henry A. Sodano. 2009. “Zinc Oxide Nanowire Interphase for Enhanced Interfacial Strength in Lightweight Polymer Fiber Composites.” ACS Applied Materials & Interfaces 1 (8): 1827–1833. doi:10.1021/am900376t.
  • Ghanbari, Davood, and Masoud Salavati-Niasari. 2015. “Synthesis of Urchin-Like CdS-Fe3O4 Nanocomposite and its Application in Flame Retardancy of Magnetic Cellulose Acetate.” Journal of Industrial and Engineering Chemistry 24: 284–292. doi:10.1016/j.jiec.2014.09.043.
  • He, Jinbo, Pongsakorn Kanjanaboos, N Laszlo Frazer, Adam Weis, Xiao-Min Lin, and Heinrich M Jaeger. 2010. “Fabrication and Mechanical Properties of Large-Scale Freestanding Nanoparticle Membranes.” Small 6 (13): 1449–1456. doi:10.1002/smll.201000114.
  • Jeziorny, Andrzej. 1978. “Parameters Characterizing the Kinetics of the non-Isothermal Crystallization of Poly(Ethylene Terephthalate) Determined by DSC.” Polymer 19 (10): 1142–1144. doi:10.1016/0032-3861(78)90060-5.
  • Kalali, Ehsan Naderi, Xin Wang, and De-Yi Wang. 2016. “Synthesis of a Fe3O4 Nanosphere@ Mg–Al Layered-Double-Hydroxide Hybrid and Application in the Fabrication of Multifunctional Epoxy Nanocomposites.” Industrial & Engineering Chemistry Research 55 (23): 6634–6642. doi:10.1021/acs.iecr.5b04873.
  • Khudiakova, A., M. Berer, S. Niedermair, B. Plank, E. Truszkiewicz, G. Meier, H. Stepanovsky, M. Wolfahrt, G. Pinter, and J. Lackner. 2020. “Systematic Analysis of the Mechanical Anisotropy of Fibre-Reinforced Polymer Specimens Produced by Laser Sintering.” Additive Manufacturing 36: 101671. doi:10.1016/j.addma.2020.101671.
  • Li, Shuang, Keqing Han, Huaiping Rong, Xuanzhe Li, and Muhuo Yu. 2014. “Surface Modification of Aramid Fibers via Ammonia-Plasma Treatment.” Journal of Applied Polymer Science 131 (10), doi:10.1002/app.40250.
  • Lin, Xue-Bao, Li Chen, Jia-Wei Long, Du Shuang-Lan, and Yu-Zhong Wang. 2018. “A Hybrid Flame Retardant for Semi-Aromatic Polyamide: Unique Structure Towards Self-Compatibilization and Flame Retardation.” Chemical Engineering Journal 334: 1046–1054. doi:10.1016/j.cej.2017.10.101.
  • Liu, L., Y. D. Huang, Z. Q. Zhang, Z. X. Jiang, and L. N. Wu. 2008. “Ultrasonic Treatment of Aramid Fiber Surface and its Effect on the Interface of Aramid/Epoxy Composites.” Applied Surface Science 254 (9): 2594–2599. doi:10.1016/j.apsusc.2007.09.091.
  • Liu, Xiaojiang, Wei Shian Tey, Jasper Yeng Chee Choo, Jiayao Chen, Pengfei Tan, Chao Cai, Adrian Ong, Lihua Zhao, and Kun Zhou. 2021. “Enhancing the Mechanical Strength of Multi Jet Fusion–Printed Polyamide 12 and its Glass Fiber-Reinforced Composite via High-Temperature Annealing.” Additive Manufacturing 46: 102205. doi:10.1016/j.addma.2021.102205.
  • Liu, Xiaojiang, Wei Shian Tey, Pengfei Tan, Kah Kit Leong, Jiayao Chen, Yujia Tian, Adrian Ong, Lihua Zhao, and Kun Zhou. 2022. “Effect of the Fibre Length on the Mechanical Anisotropy of Glass Fibre–Reinforced Polymer Composites Printed by Multi Jet Fusion.” Virtual and Physical Prototyping 17 (3): 734–748. doi:10.1080/17452759.2022.2059638.
  • Nascimento, Rodrigo Fernandes, Anderson Oliveira da Silva, Ricardo Ponde Weber, and Sergio Neves Monteiro. 2020. “Influence of UV Radiation and Moisten Associated with Natural Weathering on the Ballistic Performance of Aramid Fabric Armor.” Journal of Materials Research and Technology 9 (5): 10334–10345. doi:10.1016/j.jmrt.2020.07.046.
  • Nasser, Jalal, Jiajun Lin, Kelsey Steinke, and Henry A. Sodano. 2019. “Enhanced Interfacial Strength of Aramid Fiber Reinforced Composites Through Adsorbed Aramid Nanofiber Coatings.” Composites Science and Technology 174: 125–133. doi:10.1016/j.compscitech.2019.02.025.
  • Pötschke, Petra, Mahmoud Abdel-Goad, Ingo Alig, Sergej Dudkin, and Dirk Lellinger. 2004. “Rheological and Dielectrical Characterization of Melt Mixed Polycarbonate-Multiwalled Carbon Nanotube Composites.” Polymer 45 (26): 8863–8870. doi:10.1016/j.polymer.2004.10.040.
  • Sa, Rina, Yan Yan, Zhenhai Wei, Liqun Zhang, Wencai Wang, and Ming Tian. 2014. “Surface Modification of Aramid Fibers by Bio-Inspired Poly(Dopamine) and Epoxy Functionalized Silane Grafting.” ACS Applied Materials & Interfaces 6 (23): 21730–8. doi:10.1021/am507087p.
  • Singh, Riya, Akash Gupta, Ojestez Tripathi, Sashank Srivastava, Bharat Singh, Ankita Awasthi, S. K. Rajput, Pankaj Sonia, Piyush Singhal, and Kuldeep K Saxena. 2020. “Powder Bed Fusion Process in Additive Manufacturing: An Overview.” Materials Today: Proceedings 26: 3058–3070. doi:10.1016/j.matpr.2020.02.635.
  • Tan, Lisa Jiaying, Wei Zhu, and Kun Zhou. 2020. “Recent progress on polymer materials for additive manufacturing.”
  • Xu, Zhiyao, Yue Wang, Dingdi Wu, K. Prem Ananth, and Jiaming Bai. 2019. “The Process and Performance Comparison of Polyamide 12 Manufactured by Multi Jet Fusion and Selective Laser Sintering.” Journal of Manufacturing Processes 47:419-426. doi:10.1016/j.jmapro.2019.07.014.
  • Yan, Chunze, Liang Hao, Lin Xu, and Yusheng Shi. 2011. “Preparation, Characterisation and Processing of Carbon Fibre/Polyamide-12 Composites for Selective Laser Sintering.” Composites Science and Technology 71 (16): 1834–1841. doi:10.1016/j.compscitech.2011.08.013.
  • Zeng, Lei, Xuqing Liu, Xiaogang Chen, and Constantinos Soutis. 2018. “Surface Modification of Aramid Fibres with Graphene Oxide for Interface Improvement in Composites.” Applied Composite Materials 25 (4): 843–852. doi:10.1007/s10443-018-9718-9.
  • Zhang, Bo, Lihua Jia, Ming Tian, Nanying Ning, Liqun Zhang, and Wencai Wang. 2021. “Surface and Interface Modification of Aramid Fiber and its Reinforcement for Polymer Composites: A Review.” European Polymer Journal 147: 110352. doi:10.1016/j.eurpolymj.2021.110352.
  • Zhuang, Lin, Wei Zhang, Yongxin Zhao, Hui Shen, Han Lin, and Jinhua Liang. 2015. “Frugivorous Bird Guild Seasonal Patterns in Semiarid Chaco Forests are Linked to Habitat Seasonality but Reveal Phylogenetic Signature.” Journal of Scientific Research and Reports 5 (1): 1–5. doi:10.9734/JSRR/2015/14076.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.