Enhancing high-temperature performance of Inconel 718 LDED samples through hybrid laser polishing post-treatment

References

• Liu F, Gao J, Liu F, et al. The anisotropic wear and friction property of Inconel 718 superalloy fabricated by laser directed energy deposition. Tribol Int. 2024;188:108835. doi: 10.1016/j.triboint.2023.108835
   Web of Science ®Google Scholar
• Du B, Hu Z, Sheng L, et al. Tensile, creep behavior and microstructure evolution of an as-cast Ni-based K417G polycrystalline superalloy. J Mater Sci Technol. 2018;34(10):1805–1816. doi: 10.1016/j.jmst.2018.02.007
   Web of Science ®Google Scholar
• Ajmal KM, Yi R, Zhan Z, et al. A novel finishing approach for 3D printed inconel 718 by utilizing isotropic electrochemical etching. J Mater Process Technol. 2022;299:117356. doi: 10.1016/j.jmatprotec.2021.117356
   Web of Science ®Google Scholar
• Zhang LN, Ojo OA. Corrosion behavior of wire arc additive manufactured Inconel 718 superalloy. J Alloys Compd. 2020;829:154455. doi: 10.1016/j.jallcom.2020.154455
   Web of Science ®Google Scholar
• Mondragon-Rodriguez G, Torres-Padilla N, Camacho N, et al. Surface modification and tribological behavior of plasma nitrided Inconel 718 manufactured via direct melting laser sintering method. Surf Coat Technol. 2020;387:125526. doi: 10.1016/j.surfcoat.2020.125526
   Web of Science ®Google Scholar
• Li H, Feng S, Li J, et al. Effect of heat treatment on the δ phase distribution and corrosion resistance of selective laser melting manufactured Inconel 718 superalloy. Mater Corros. 2018;69:1810159. doi: 10.1002/maco.201810159
   Web of Science ®Google Scholar
• Park S, Liu P, Yi K, et al. Mechanical properties estimation of additively manufactured metal components using femtosecond laser ultrasonics and laser polishing. Int J Mach Tools Manuf. 2021;166:103745. doi: 10.1016/j.ijmachtools.2021.103745
   Web of Science ®Google Scholar
• Yu Z, Zheng Y, Chen J, et al. Effect of laser remelting processing on microstructure and mechanical properties of 17-4 PH stainless steel during laser direct metal deposition. J Mater Process Technol. 2020;284:116738. doi: 10.1016/j.jmatprotec.2020.116738
   Web of Science ®Google Scholar
• Sun Y, Jin L, Gong Y, et al. Experimental evaluation of surface generation and force time-varying characteristics of curvilinear grooved micro end mills fabricated by EDM. J Manuf Process. 2022;73:799–814. doi: 10.1016/j.jmapro.2021.11.049
   Web of Science ®Google Scholar
• Kumar S, Satapathy B, Pradhan D, et al. Effect of surface modification on the hot corrosion resistance of Inconel 718 at 700°C. Mater Res Express. 2019;6:086549. doi: 10.1088/2053-1591/ab1dc7
   Google Scholar
• Yao C, Wu D, Ma L, et al. Surface integrity evolution and fatigue evaluation after milling mode, shot peening and polishing mode for TB6 titanium alloy. Appl Surf Sci. 2016;387:1257–1264. doi: 10.1016/j.apsusc.2016.06.162
   Web of Science ®Google Scholar
• Beaucamp AT, Namba Y, Charlton P, et al. Finishing of additively manufactured titanium alloy by shape adaptive grinding (SAG). Surf Topogr Metrol Prop. 2015;3:024001. doi: 10.1088/2051-672X/3/2/024001
   Web of Science ®Google Scholar
• Idaszek J, Buhagiar J, Szl K, et al. The influence of chemical polishing of titanium scaff olds on their mechanical strength and in-vitro cell response. Mat Sci Eng C. 2019;95:428–439. doi: 10.1016/j.msec.2018.04.019
   PubMed Web of Science ®Google Scholar
• Qin LY, Men JH, Zhang LS, et al. Microstructure homogenizations of Ti-6Al-4 V alloy manufactured by hybrid selective laser melting and laser deposition manufacturing. Mater Sci Eng A. 2019;759:404–414. doi: 10.1016/j.msea.2019.05.049
   Web of Science ®Google Scholar
• Dong G, Marleau-Finley J, Zhao YF. Investigation of electrochemical post-processing procedure for Ti-6Al-4 V lattice structure manufactured by direct metal laser sintering (DMLS). Int J Adv Manuf Technol. 2019;104(9-12):3401–3417. doi: 10.1007/s00170-019-03996-5
   Web of Science ®Google Scholar
• Nesli S, Yilmaz O. Surface characteristics of laser polished Ti-6Al-4 V parts produced by electron beam melting additive manufacturing process. Int J Adv Manuf Technol. 2021;114(1-2):271–289. doi: 10.1007/s00170-021-06861-6
   Web of Science ®Google Scholar
• Liu Z, Wang C, Mi G, et al. Surface morphological evolution and microhardness change of Cr12MoV steel by pulsed laser polishing. Opt Laser Technol. 2024;171:110419. doi: 10.1016/j.optlastec.2023.110419
   Web of Science ®Google Scholar
• Mushtaq R, Wang Y, Khan A, et al. A post-processing laser polishing method to improve process performance of 3D printed new Industrial Nylon-6 polymer. J Manuf Process. 2023;101:546–560. doi: 10.1016/j.jmapro.2023.06.019
   Web of Science ®Google Scholar
• Abdullah M, Evgueni V, Remus O. Experimental analysis of applicability of a picosecond laser for micro-polishing of micro-milled Inconel 718 superalloy. Int J Adv Manuf Technol. 2014;70(9-12):1963–1978. doi: 10.1007/s00170-013-5408-9
   Web of Science ®Google Scholar
• Fang Z, Lu L, Chen L, et al. Laser polishing of additive manufactured superalloy. Procedia CIRP. 2018;71:150–154. doi: 10.1016/j.procir.2018.05.005
   Google Scholar
• Hou JT, Xu H, Li H, et al. In-situ laser polishing additive manufactured AlSi10Mg effect of laser polishing strategy on surface morphology, roughness and microhardness. Materials (Basel). 2021;14(2):393. doi: 10.3390/ma14020393
   PubMed Web of Science ®Google Scholar
• Dadbakhsh S, Hao L, Kong CY. Surface finish improvement of LMD samples using laser polishing. Virtual Phys Prototyp. 2010;5(4):215–221. doi: 10.1080/17452759.2010.528180
   Google Scholar
• Marimuthu S, Triantaphyllou A, Antar M, et al. Laser polishing of selective laser melted components. Int J Mach Tools Manuf. 2015;95:97–104. doi: 10.1016/j.ijmachtools.2015.05.002
   Web of Science ®Google Scholar
• Li J, Wu H, Liu H, et al. Surface and property characterization of selective laser-melted Ti-6Al-4 V alloy after laser polishing. Int J Adv Manuf Technol. 2023;128(1-2):703–714. doi: 10.1007/s00170-023-11880-6
   Web of Science ®Google Scholar
• Wang Y, Li Y, Guan Y. Surface modification and mechanical properties of laser powder bed fusion Inconel 718 after magnetic-assisted laser polishing. Opt Laser Technol. 2023;162:109291. doi: 10.1016/j.optlastec.2023.109291
   Web of Science ®Google Scholar
• Kang D, Zou P, Wu H, et al. Research on ultrasonic vibration-assisted laser polishing of the 304 stainless steels. J Manuf Process. 2021;62:403–417. doi: 10.1016/j.jmapro.2020.12.009
   Web of Science ®Google Scholar
• Metelkova J, Vanmunster L, Haitjema H, et al. Hybrid dual laser processing for improved quality of inclined up-facing surfaces in laser powder bed fusion of metals. J Mater Process Technol. 2021;298:117263. doi: 10.1016/j.jmatprotec.2021.117263
   Web of Science ®Google Scholar
• Liu Y, Ouyang W, Wu H, et al. Improving surface quality and superficial microstructure of LDED Inconel 718 superalloy processed by hybrid laser polishing. J Mater Process Technol. 2021;300:117428. doi: 10.1016/j.jmatprotec.2021.117428
   Web of Science ®Google Scholar
• Liu Y, Sun S, Wang J, et al. Tribological behaviors of LDED Inconel 718 samples polished with a hybrid laser polishing technique. J Mat Res Technol. 2023;25:633–646. doi: 10.1016/j.jmrt.2023.05.230
   Google Scholar
• Zhang J, Zhang Q, Zhuang Y, et al. Microstructures and cyclic hot corrosion behavior of laser deposited Inconel 718 alloy under different heat treatment conditions. Opt Laser Technol. 2021;135:106659. doi: 10.1016/j.optlastec.2020.106659
   Web of Science ®Google Scholar
• Sano K, Oono N, Ukai S, et al. γ″-Ni3Nb precipitate in Fe-Ni base alloy. J Nucl Mater. 2013;442(1-3):389–393. doi: 10.1016/j.jnucmat.2013.07.037
   Web of Science ®Google Scholar
• Xu Z, Ouyang W, Liu Y, et al. Effects of laser polishing on surface morphology and mechanical properties of additive manufactured TiAl components. J Manuf Process. 2021;65:51–59. doi: 10.1016/j.jmapro.2021.03.014
   Web of Science ®Google Scholar
• Gong G, Wang Z, Du X, et al. Comparative study on mechanical properties and high temperature oxidation behaviour of Hastelloy X and Inconel 718 fabricated by laser directed energy deposition. J Mat Res Technol. 2024;28:2624–2635. doi: 10.1016/j.jmrt.2023.12.199
   Google Scholar
• Mannava V, Rao AS, Paulose N, et al. Hot corrosion studies on Ni-base superalloy at 650 ◦C under marine-like environment conditions using three salt mixture (Na2SO4 + NaCl + NaVO3). Corros Sci. 2016;105:109–119. doi: 10.1016/j.corsci.2016.01.008
   Web of Science ®Google Scholar
• Kang YJ, Yang S, Kim YK, et al. Effect of post-treatment on the microstructure and high-temperature oxidation behaviour of additively manufactured inconel 718 alloy. Corros Sci. 2019;158:108082. doi: 10.1016/j.corsci.2019.06.030
   Web of Science ®Google Scholar
• Liu FJ, Zhang M, Dong J, et al. High-temperature oxidation of FGH96 P/M superalloy. Acta Metall Sinica. 2007;20:102–110. doi: 10.1016/S1006-7191(07)60014-3
   Google Scholar