Frequency and dynamic stability analysis of the sandwich structure with honeycomb core and GOP reinforcement using deep neural network

References

• Lv Z, Guo J, Lv H. Safety Poka Yoke in Zero-Defect Manufacturing Based on Digital Twins. IEEE Trans Ind Inform. 2023;19(2):1176–1184. DOI:10.1109/TII.2021.3139897.
   Google Scholar
• Li A, Spano D, Krivochiza J, et al. A Tutorial on Interference Exploitation via Symbol-Level Precoding: Overview, State-of-the-Art and Future Directions. IEEE Commun Surv Tutor. 2020;22(2):796–839. DOI:10.1109/COMST.9739.
   Google Scholar
• Hu Y, Qing J, Liu ZH, et al. Hovering efficiency optimization of the ducted propeller with weight penalty taken into account. Aerosp Sci Technol. 2021;117:106937. DOI:10.1016/j.ast.2021.106937.
   Google Scholar
• Wang Y, Zou R, Liu F, et al. A review of wind speed and wind power forecasting with deep neural networks. Appl Energy. 2021;304:117766. DOI:10.1016/j.apenergy.2021.117766.
   Google Scholar
• Chen J, Du L, Guo Y. Label constrained convolutional factor analysis for classification with limited training samples. Inf Sci. 2021;544:372–394. DOI:10.1016/j.ins.2020.08.048.
   Google Scholar
• Meng Q, Lai X, Yan Z, et al. Motion Planning and Adaptive Neural Tracking Control of an Uncertain Two-Link Rigid–Flexible Manipulator With Vibration Amplitude Constraint. IEEE Trans Neural Netw Learn Syst. 2022;33(8):3814–3828. DOI:10.1109/TNNLS.2021.3054611.
   Google Scholar
• Ebrahimi F, Habibi M, Safarpour H. On modeling of wave propagation in a thermally affected GNP-reinforced imperfect nanocomposite shell. Eng Comput. 2019;35:1375–1389.
   Google Scholar
• Adamian A, Hosseini Safari K, Sheikholeslami M, et al. Critical temperature and frequency characteristics of GPLs-reinforced composite doubly curved panel. Appl Sci. 2020;10:3251.
   Google Scholar
• Alijani F, Amabili M, Ferrari G, et al. Nonlinear vibrations of laminated and sandwich rectangular plates with free edges. Part 2: experiments & comparisons. Compos Struct. 2013;105:437–445.
   Google Scholar
• Safa M, Shariati M, Ibrahim Z, et al. Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steel-concrete composite beam’s shear strength. Steel Compos Struct. 2016;21:679–688.
   Google Scholar
• Shariati A, RamliSulong N, Shariati M. Various types of shear connectors in composite structures: a review. Int J Phys Sci. 2012;7:2876–2890.
   Google Scholar
• Shariati M, Sulong NR, Shariati A, et al. Comparative performance of channel and angle shear connectors in high strength concrete composites: an experimental study. Constr Build Mater. 2016;120:382–392.
   Google Scholar
• Khorramian K, Maleki S, Shariati M, et al. Numerical analysis of tilted angle shear connectors in steel-concrete composite systems. Steel Compos Struct. 2017;23:67–85.
   Google Scholar
• Paknahad M, Shariati M, Sedghi Y, et al. Shear capacity equation for channel shear connectors in steel-concrete composite beams. Steel Compos Struct. 2018;28:483–494.
   Google Scholar
• Shariati M, Mafipour MS, Mehrabi P, et al. Application of extreme learning machine (ELM) and genetic programming (GP) to design steel-concrete composite floor systems at elevated temperatures. Steel Compos Struct. 2019;33:319–332.
   Google Scholar
• Moayedi H, Habibi M, Safarpour H, et al. Buckling and frequency responses of a graphene nanoplatelet reinforced composite microdisk. Int J Appl Mech. 2019;11:1950102.
   Google Scholar
• Zhang H, Li L, Ma W, et al. Effects of welding residual stresses on fatigue reliability assessment of a PC beam bridge with corrugated steel webs under dynamic vehicle loading. Structures. 2022;45:1561–1572. DOI:10.1016/j.istruc.2022.09.094.
   Google Scholar
• Xiao X, Zhang H, Li Z, et al. Effect of temperature on the fatigue life assessment of suspension bridge steel deck welds under dynamic vehicle loading. Math Probl Eng. 2022;2022:1–14. DOI:10.1155/2022/7034588.
   Google Scholar
• Ebrahimi F, Supeni EEB, Habibi M, et al. Frequency characteristics of a GPL-reinforced composite microdisk coupled with a piezoelectric layer. Eur Phys J Plus. 2020;135:1–32.
   Google Scholar
• Liao L, Du L, Guo Y. Semi-Supervised SAR Target Detection Based on an Improved Faster R-CNN. Remote Sens. 2022;14(1):143. DOI:10.3390/rs14010143.
   Google Scholar
• Xiong S, Li B, Zhu S. DCGNN: a single-stage 3D object detection network based on density clustering and graph neural network. Complex Intel Syst. 2022;12:1729. DOI:10.1007/s40747-022-00926-z.
   Google Scholar
• Ebrahimi F, Mohammadi K, Barouti MM, et al. Wave propagation analysis of a spinning porous graphene nanoplatelet-reinforced nanoshell. Waves Random Complex Media. 2021;31:1655–1681.
   Google Scholar
• Jermsittiparsert K, Ghabussi A, Forooghi A, et al. Critical voltage, thermal buckling and frequency characteristics of a thermally affected GPL reinforced composite microdisk covered with piezoelectric actuator. Mech Based Des Struct Mach. 2020:1–23. DOI:10.1080/15397734.2020.1748052.
   Google Scholar
• Shamsaddini Lori E, Ebrahimi F, Elianddy Bin Supeni E, et al. The critical voltage of a GPL-reinforced composite microdisk covered with piezoelectric layer. Eng Comput. 2021;37:3489–3508.
   Google Scholar
• Al-Furjan M, Habibi M, Safarpour H. Vibration control of a smart shell reinforced by graphene nanoplatelets. Int J Appl Mech. 2020;12:2050066.
   Google Scholar
• Yin M, Zhu Y, Yin G, et al. Deep feature interaction network for point cloud registration, with applications to optical measurement of blade profiles. IEEE Trans Ind Inform. 2022:1–10. DOI:10.1109/TII.2022.3220889.
   Google Scholar
• Hashemi HR, Alizadeh AA, Oyarhossein MA, et al. Influence of imperfection on amplitude and resonance frequency of a reinforcement compositionally graded nanostructure. Waves Random Complex Media. 2021;31:1340–1366.
   Google Scholar
• Moayedi H, Aliakbarlou H, Jebeli M, et al. Thermal buckling responses of a graphene reinforced composite micropanel structure. Int J Appl Mech. 2020;12:2050010.
   Google Scholar
• Al-Furjan M, Moghadam SA, Dehini R, et al. Vibration control of a smart shell reinforced by graphene nanoplatelets under external load: semi-numerical and finite element modeling. Thin-Walled Struct. 2021;159:107242.
   Google Scholar
• Al-Furjan M, Habibi M, won Jung D, et al. Chaotic responses and nonlinear dynamics of the graphene nanoplatelets reinforced doubly-curved panel. Eur J Mechanics-A/Solids. 2021;85:104091.
   Google Scholar
• Al-Furjan M, Oyarhossein MA, Habibi M, et al. Wave propagation simulation in an electrically open shell reinforced with multi-phase nanocomposites. Eng Comput. 2020:1–17. DOI:10.1007/s00366-020-01167-9.
   Google Scholar
• Al-Furjan M, Fereidouni M, Sedghiyan D, et al. Three-dimensional frequency response of the CNT-Carbon-Fiber reinforced laminated circular/annular plates under initially stresses. Compos Struct. 2021;257:113146.
   Google Scholar
• Al-Furjan M, Dehini R, Paknahad M, et al. On the nonlinear dynamics of the multi-scale hybrid nanocomposite-reinforced annular plate under hygro-thermal environment. Arch Civil Mech Eng. 2021;21:1–25.
   Google Scholar
• Zare R, Najaafi N, Habibi M, et al. Influence of imperfection on the smart control frequency characteristics of a cylindrical sensor-actuator GPLRC cylindrical shell using a proportional-derivative smart controller. Smart Struct Syst Int J. 2020;26:469–480.
   Google Scholar
• Safarpour H, Pourghader J, Habibi M. Influence of spring-mass systems on frequency behavior and critical voltage of a high-speed rotating cantilever cylindrical three-dimensional shell coupled with piezoelectric actuator. J Vib Control. 2019;25:1543–1557.
   Google Scholar
• Pourjabari A, Hajilak ZE, Mohammadi A, et al. Effect of porosity on free and forced vibration characteristics of the GPL reinforcement composite nanostructures. Comput Math Appl. 2019;77:2608–2626.
   Google Scholar
• Safarpour H, Ghanizadeh SA, Habibi M. Wave propagation characteristics of a cylindrical laminated composite nanoshell in thermal environment based on the nonlocal strain gradient theory. Eur Phys J Plus. 2018;133:532.
   Google Scholar
• Safarpour H, Mohammadi K, Ghadiri M, et al. Effect of porosity on flexural vibration of CNT-reinforced cylindrical shells in thermal environment using GDQM. Int J Struct Stab Dyn. 2018;18:1850123.
   Google Scholar
• Al-Furjan M, Habibi M, Won Jung D, et al. On the buckling of the polymer-CNT-fiber nanocomposite annular system under thermo-mechanical loads. Mech Based Des Struct Mach. 2020:1–21. DOI:10.1080/15397734.2020.1830106.
   Google Scholar
• Wang Z, Yu S, Xiao Z, et al. Frequency and buckling responses of a high-speed rotating fiber metal laminated cantilevered microdisk. Mech Adv Mater Struct. 2020:1–14. DOI:10.1080/15376494.2020.1824284.
   Google Scholar
• Zhu Z. Y, Liu Y. L, Gou G. Q, etal. Effect of heat input on interfacial characterization of the butter joint of hot-rolling CP-Ti/Q235 bimetallic sheets by Laser + CMT. Sci Rep. 2021;11(1):181. DOI:10.1038/s41598-021-89343-9.
   Google Scholar
• Zhou C, Zhao Y, Zhang J, et al. Vibrational characteristics of multi-phase nanocomposite reinforced circular/annular system. Adv Nano Res. 2020;9:295–307.
   Google Scholar
• Al-Furjan M, Oyarhossein MA, Habibi M, et al. Frequency and critical angular velocity characteristics of rotary laminated cantilever microdisk via two-dimensional analysis. Thin-Walled Struct. 2020;157:107111.
   Google Scholar
• Cheshmeh E, Karbon M, Eyvazian A, et al. Buckling and vibration analysis of FG-CNTRC plate subjected to thermo-mechanical load based on higher order shear deformation theory. Mech Based Des Struct Mach. 2020:1–24. DOI:10.1080/15397734.2020.1744005.
   Google Scholar
• Al-Furjan M, Habibi M, Ghabussi A, et al. Non-polynomial framework for stress and strain response of the FG-GPLRC disk using three-dimensional refined higher-order theory. Eng Struct. 2021;228:111496.
   Google Scholar
• Al-Furjan M, Habibi M, Chen G, et al. Chaotic oscillation of a multi-scale hybrid nano-composites reinforced disk under harmonic excitation via GDQM. Compos Struct. 2020;252:112737.
   Google Scholar
• Al-Furjan M, Habibi M, Ebrahimi F, et al. A coupled thermomechanics approach for frequency information of electrically composite microshell using heat-transfer continuum problem. Eur Phys J Plus. 2020;135:1–45.
   Google Scholar
• Al-Furjan M, Fereidouni M, Habibi M, et al. Influence of in-plane loading on the vibrations of the fully symmetric mechanical systems via dynamic simulation and generalized differential quadrature framework. Eng Comput. 2020:1–23. DOI:10.1007/s00366-020-01177-7.
   Google Scholar
• Habibi M, Safarpour M, Safarpour H. Vibrational characteristics of a FG-GPLRC viscoelastic thick annular plate using fourth-order Runge-Kutta and GDQ methods. Mech Based Des Struct Mach. 2020: 1–22. DOI:10.1080/15397734.2020.1779086.
   Google Scholar
• Bai Y, Alzahrani B, Baharom S, et al. Semi-numerical simulation for vibrational responses of the viscoelastic imperfect annular system with honeycomb core under residual pressure. Eng Comput. 2020:1–26. DOI:10.1007/s00366-020-01191-9.
   Google Scholar
• Liu Z, Wu X, Yu M, et al. Large-amplitude dynamical behavior of multilayer graphene platelets reinforced nanocomposite annular plate under thermo-mechanical loadings. Mech Based Des Struct Mach. 2020:1–25. DOI:10.1080/15397734.2020.1815544.
   Google Scholar
• Huo J, Zhang G, Ghabussi A, et al. Bending analysis of FG-GPLRC axisymmetric circular/annular sector plates by considering elastic foundation and horizontal friction force using 3D-poroelasticity theory. Compos Struct. 2021;276:114438.
   Google Scholar
• Liu Z, Su S, Xi D, et al. Vibrational responses of a MHC viscoelastic thick annular plate in thermal environment using GDQ method. Mech Based Des Struct Mach. 2020:1–26. DOI:10.1080/15397734.2020.1784201.
   Google Scholar
• He X, Ding J, Habibi M, et al. Non-polynomial framework for bending responses of the multi-scale hybrid laminated nanocomposite reinforced circular/annular plate. Thin-Walled Struct. 2021;166:108019.
   Google Scholar
• Al-Furjan M, Alzahrani B, Shan L, et al. Nonlinear forced vibrations of nanocomposite-reinforced viscoelastic thick annular system under hygrothermal environment. Mech Based Des Struct Mach. 2020:1–27. DOI:10.1080/15397734.2020.1824795.
   Google Scholar
• Li Y, Li S, Guo K, et al. On the modeling of bending responses of graphene-reinforced higher order annular plate via two-dimensional continuum mechanics approach. Eng Comput. 2020:1–22. DOI:10.1007/s00366-020-01166-w.
   Google Scholar
• Guo H, Zhuang X, Chen P, et al. Analysis of three-dimensional potential problems in non-homogeneous media with physics-informed deep collocation method using material transfer learning and sensitivity analysis. Eng Comput. 2022:1–22. DOI:10.1007/s00366-022-01633-6.
   Google Scholar
• López J, Anitescu C, Rabczuk T. Isogeometric structural shape optimization using automatic sensitivity analysis. Appl Math Model. 2021;89:1004–1024.
   Google Scholar
• Hamdia KM, Marino M, Zhuang X, et al. Sensitivity analysis for the mechanics of tendons and ligaments: investigation on the effects of collagen structural properties via a multiscale modeling approach. Int J Numer Method Biomed Eng. 2019;35:e3209.
   Google Scholar
• Zhang Z, Li Y, Wu H, et al. Mechanical analysis of functionally graded graphene oxide-reinforced composite beams based on the first-order shear deformation theory. Mech Adv Mater Struct. 2020;27:3–11.
   Google Scholar
• Wu J, Habibi M. Dynamic simulation of the ultra-fast-rotating sandwich cantilever disk via finite element and semi-numerical methods. Eng Comput. 2022;38(S5):4127–4143. DOI:10.1007/s00366-021-01396-6.
   Google Scholar
• Huang X, Hao H, Oslub K, et al. Dynamic stability/instability simulation of the rotary size-dependent functionally graded microsystem. Eng Comput. 2022;38(S5):4163–4179. DOI:10.1007/s00366-021-01399-3.
   Google Scholar
• Guo J, Baharvand A, Tazeddinova D, et al. An intelligent computer method for vibration responses of the spinning multi-layer symmetric nanosystem using multi-physics modeling. Eng Comput. 2022;38(S5):4217–4238. DOI:10.1007/s00366-021-01433-4.
   Google Scholar
• Liu H, Zhao Y, Pishbin M, et al. A comprehensive mathematical simulation of the composite size-dependent rotary 3D microsystem via two-dimensional generalized differential quadrature method. Eng Comput. 2022;38(S5):4181–4196. DOI:10.1007/s00366-021-01419-2.
   Google Scholar
• Zhu X, Zhang J, Zhang W, et al. Vibration frequencies and energies of an auxetic honeycomb sandwich plate. Mech Adv Mater Struct. 2019;26:1951–1957.
   Google Scholar
• Moradi Z, Ebrahimi F, Davoudi M. Coupled Newmark beta technique and GDQ method for energy harvesting and vibration control of the piezoelectric MEMS/NEMS subjected to a blast load. Eng Anal Bound Elem. 2022;144:492–506. DOI:10.1016/j.enganabound.2022.08.021.
   Google Scholar
• Al-Furjan MSH, Bolandi SY, Habibi M, et al. Enhancing vibration performance of a spinning smart nanocomposite reinforced microstructure conveying fluid flow. Eng Comput. 2022;38(S5):4097–4112. DOI:10.1007/s00366-020-01255-w.
   Google Scholar
• Liu H, Shen S, Oslub K, et al. Amplitude motion and frequency simulation of a composite viscoelastic microsystem within modified couple stress elasticity. Eng Comput. 2022;38(S5):3977–3991. DOI:10.1007/s00366-021-01316-8.
   Google Scholar
• Kong F, Dong F, Duan M, et al. On the vibrations of the Electrorheological sandwich disk with composite face sheets considering pre and post-yield regions. Thin-Walled Struct. 2022;179:109631. DOI:10.1016/j.tws.2022.109631.
   Google Scholar
• Moradi Z, Davoudi M, Ebrahimi F, et al. Intelligent wave dispersion control of an inhomogeneous micro-shell using a proportional-derivative smart controller. Waves Random Complex Media. 2021;14:1–24. DOI:10.1080/17455030.2021.1926572.
   Google Scholar
• Al-Furjan M, Habibi M, Chen G, et al. Chaotic simulation of the multi-phase reinforced thermo-elastic disk using GDQM. Eng Comput. 2020:1–24. DOI:10.1007/s00366-020-01144-2.
   Google Scholar
• Jalali MR, Shavalipour A, Safarpour M, et al. Frequency analysis of a graphene platelet-reinforced imperfect cylindrical panel covered with piezoelectric sensor and actuator. The J Strain Anal Eng Des. 2020;55:181–196.
   Google Scholar
• Al-Furjan M, Safarpour H, Habibi M, et al. A comprehensive computational approach for nonlinear thermal instability of the electrically FG-GPLRC disk based on GDQ method. Eng Comput. 2020:1–18. DOI:10.1007/s00366-020-01088-7.
   Google Scholar
• Shariati A, Habibi M, Tounsi A, et al. Application of exact continuum size-dependent theory for stability and frequency analysis of a curved cantilevered microtubule by considering viscoelastic properties. Eng Comput. 2021;37:3629–3648.
   Google Scholar
• Ebrahimi F, Hajilak ZE, Habibi M, et al. Buckling and vibration characteristics of a carbon nanotube-reinforced spinning cantilever cylindrical 3D shell conveying viscous fluid flow and carrying spring-mass systems under various temperature distributions. Proc Inst Mech Eng, Part C: J Mech Eng Sci. 2019;233:4590–4605.
   Google Scholar
• Oyarhossein MA, Alizadeh AA, Habibi M, et al. Dynamic response of the nonlocal strain-stress gradient in laminated polymer composites microtubes. Sci Rep. 2020;10:1–19.
   Google Scholar
• Zhao H, Li C, Fu Y, et al. Quasi-static indentation, low-velocity impact, and resonance responses of the laminated double-curved panel considering various boundary conditions. Thin-Walled Struct. 2023;183:110360.
   Google Scholar
• Zheng W, Liu J, Oyarhossein MA, et al. Prediction of nth-order derivatives for vibration responses of a sandwich shell composed of a magnetorheological core and composite face layers. Eng Anal Boundary Elem. 2023;146:170–183.
   Google Scholar
• SafarPour H, Mohammadi K, Ghadiri M, et al. Influence of various temperature distributions on critical speed and vibrational characteristics of rotating cylindrical microshells with modified lengthscale parameter. Eur Phys J Plus. 2017;132:1–19.
   Google Scholar
• Safarpour H, Mohammadi K, Ghadiri M. Temperature-dependent vibration analysis of a FG viscoelastic cylindrical microshell under various thermal distribution via modified length scale parameter: a numerical solution. J Mech Behav Mater. 2017;26:9–24.
   Google Scholar
• SafarPour H, Hosseini M, Ghadiri M. Influence of three-parameter viscoelastic medium on vibration behavior of a cylindrical nonhomogeneous microshell in thermal environment: an exact solution. J Therm Stresses. 2017;40:1353–1367.
   Google Scholar
• Sadd MH. Elasticity: theory, applications, and numerics. Oxford: Academic Press; 2009.
   Google Scholar
• Safarpour M, Forooghi A, Dimitri R, et al. Theoretical and numerical solution for the bending and frequency response of graphene reinforced nanocomposite rectangular plates. Appl Sci. 2021;11:6331.
   Google Scholar
• Huang X, Zhu Y, Vafaei P, et al. An iterative simulation algorithm for large oscillation of the applicable 2D-electrical system on a complex nonlinear substrate. Eng Comput. 2021:1–13. DOI:10.1007/s00366-021-01320-y.
   Google Scholar
• Jiao J, Ghoreishi S-M, Moradi Z, et al. Coupled particle swarm optimization method with genetic algorithm for the static–dynamic performance of the magneto-electro-elastic nanosystem. Eng Comput. 2021:1–15. DOI:10.1007/s00366-021-01391-x.
   Google Scholar
• Ma L, Liu X, Moradi Z. On the chaotic behavior of graphene-reinforced annular systems under harmonic excitation. Eng Comput. 2021:1–25. DOI:10.1007/s00366-020-01210-9.
   Google Scholar
• Liu Y, Wang W, He T, et al. On the modelling of the vibration behaviors via discrete singular convolution method for a high-order sector annular system. Eng Comput. 2021:1–23. DOI:10.1007/s00366-021-01454-z.
   Google Scholar
• Shu C. Differential quadrature and its application in engineering. Berlin: Springer Science & Business Media; 2012.
   Google Scholar
• Bagheri H, Kiani Y, Eslami M. Asymmetric thermo-inertial buckling of annular plates. Acta Mech. 2017;228:1493–1509.
   Google Scholar
• Chen F, Chen J, Duan R, et al. Investigation on dynamic stability and aeroelastic characteristics of composite curved pipes with any yawed angle. Compos Struct. 2022;284:115195. DOI:10.1016/j.compstruct.2022.115195.
   Google Scholar
• Tornabene F, Fantuzzi N, Ubertini F, et al. Strong formulation finite element method based on differential quadrature: a survey. Appl Mech Rev. 2015;67; DOI:10.1115/1.4028859.
   Google Scholar
• Shi X, Li J, Habibi M. On the statics and dynamics of an electro-thermo-mechanically porous GPLRC nanoshell conveying fluid flow. Mech Based Des Struct Mach. 2022;50(6):2147–2183. DOI:10.1080/15397734.2020.1772088.
   Google Scholar
• Zhu L, Ren H, Habibi M, et al. Predicting the environmental economic dispatch problem for reducing waste nonrenewable materials via an innovative constraint multi-objective Chimp Optimization Algorithm. J Clean Prod. 2022;365:132697. DOI:10.1016/j.jclepro.2022.132697.
   Google Scholar
• Yegnanarayana B. Artificial neural networks. New Delhi: PHI Learning; 2009.
   Google Scholar
• Zeiler MD. Adadelta: an adaptive learning rate method. arXiv preprint. arXiv:1212.5701. 2012.
   Google Scholar
• Yasmin A, Daniel IM. Mechanical and thermal properties of graphite platelet/epoxy composites. Polymer. 2004;45:8211–8219.
   Google Scholar
• Mizusawa T. Vibration of thick annular sector plates using semi-analytical methods. J Sound Vib. 1991;150:245–259.
   Google Scholar
• Liew K, Ng T, Wang B. Vibration of annular sector plates from three-dimensional analysis. J Acoust Soc Am. 2001;110:233–242.
   Google Scholar