On the stretchability prediction of sheet metals using an artificial neural network based on experimental data

References

• Moradi H, Atashi P, Amelirad O, et al. Machine learning modeling and DOE-assisted optimization in synthesis of nanosilica particles via Stöber method. Adv Nano Res. 2022;12(4):387–403.
   Google Scholar
• Xie Y, Wu Y, Jalali A, et al. Effects of thickness reduction in cold rolling process on the formability of sheet metals using ANFIS. Sci Rep. 2022;12(1):10434.
   Google Scholar
• Zhu Lei, Ren Hao, Habibi Mostafa, etal. Predicting the environmental economic dispatch problem for reducing waste nonrenewable materials via an innovative constraint multi-objective Chimp Optimization Algorithm. Journal of Cleaner Production. 2022;365:132697. http://dx.doi.org/10.1016/j.jclepro.2022.132697.
   Google Scholar
• Wu Jinhui, Habibi Mostafa. Dynamic simulation of the ultra-fast-rotating sandwich cantilever disk via finite element and semi-numerical methods. Engineering with Computers. 2022;38(S5):4127–4143. http://dx.doi.org/10.1007/s00366-021-01396-6.
   Google Scholar
• Najaafi Neda, Jamali Mansoureh, Habibi Mostafa, etal. Dynamic instability responses of the substructure living biological cells in the cytoplasm environment using stress-strain size-dependent theory. Journal of Biomolecular Structure and Dynamics. 2021;39(7):2543–2554. http://dx.doi.org/10.1080/07391102.2020.1751297.
   Google Scholar
• Vatanpour V, Jouyandeh M, Mousavi Khadem SS, et al. Highly antifouling polymer-nanoparticle-nanoparticle/polymer hybrid membranes. Sci Total Environ. 2022;810:152228.
   Google Scholar
• Asgharnejad Lamraski MB, Naikoo GA, Zamani Pedram M, et al. Thermodynamic modeling of several alcohol-hydrocarbon binary mixtures at low to moderate conditions. J Mol Liq. 2022;346:Article 117924.
   Google Scholar
• Vatanpour V, Jouyandeh M, Akhi H, et al. Hyperbranched polyethylenimine functionalized silica/polysulfone nanocomposite membranes for water purification. Chemosphere. 2022;290:Article 133363.
   Google Scholar
• Moradi H, Kim D-S, Kim S-H, et al. Experimental and numerical study on diazinon removal using plasma bubble column reactor: modeling, kinetics, mechanisms, and degradation products. J Environ Chem Eng. 2022;10(5):Article 108291.
   Google Scholar
• Huang Hua, Yao Yifan, Liang Cunjun, etal. Experimental study on cyclic performance of steel-hollow core partially encased composite spliced frame beam. Soil Dynamics and Earthquake Engineering. 2022;163:107499. http://dx.doi.org/10.1016/j.soildyn.2022.107499.
   Google Scholar
• Lu Ze-Qi, Gu Dong-Hao, Ding Hu, etal. Nonlinear vibration isolation via a circular ring. Mechanical Systems and Signal Processing. 2020;136:106490. http://dx.doi.org/10.1016/j.ymssp.2019.106490.
   Google Scholar
• Tian Li-min, Li Mu-han, Li Lei, etal. Novel joint for improving the collapse resistance of steel frame structures in column-loss scenarios. Thin-Walled Structures. 2023;182:110219. http://dx.doi.org/10.1016/j.tws.2022.110219.
   Google Scholar
• Liu Zhaofeng, Wu Xinyin, Yu Man, etal. Large-amplitude dynamical behavior of multilayer graphene platelets reinforced nanocomposite annular plate under thermo-mechanical loadings. Mechanics Based Design of Structures and Machines. 2022;50(11):3722–3746. http://dx.doi.org/10.1080/15397734.2020.1815544.
   Google Scholar
• Liu Zhe, Su Sili, Xi Dunru, etal. Vibrational responses of a MHC viscoelastic thick annular plate in thermal environment using GDQ method. Mechanics Based Design of Structures and Machines. 2022;50(8):2688–2713. http://dx.doi.org/10.1080/15397734.2020.1784201.
   Google Scholar
• Shi Xiaofeng, Li Jianying, Habibi Mostafa. On the statics and dynamics of an electro-thermo-mechanically porous GPLRC nanoshell conveying fluid flow. Mechanics Based Design of Structures and Machines. 2022;50(6):2147–2183. http://dx.doi.org/10.1080/15397734.2020.1772088.
   Google Scholar
• Wang Zhiyong, Yu Shuiqin, Xiao Zhixiong, etal. Frequency and buckling responses of a high-speed rotating fiber metal laminated cantilevered microdisk. Mechanics of Advanced Materials and Structures. 2022;29(10):1475–1488. http://dx.doi.org/10.1080/15376494.2020.1824284.
   Google Scholar
• Dai Zuocai, Jiang Zhiyong, Zhang Liang, etal. Frequency characteristics and sensitivity analysis of a size-dependent laminated nanoshell. Advances in nano research. 2021;10:175–189.
   Google Scholar
• Mohamed M, Elatriby S, Shi Z, et al. Prediction of forming limit diagram for AA5754 using artificial neural network modelling. in Key engineering materials. 2016. Trans Tech Publ.
   Google Scholar
• Xiao Xinhui, Zhang Haiping, Li Zhaochao, etal. Effect of Temperature on the Fatigue Life Assessment of Suspension Bridge Steel Deck Welds under Dynamic Vehicle Loading. Mathematical Problems in Engineering. 2022;2022:1–14. http://dx.doi.org/10.1155/2022/7034588.
   Google Scholar
• Derogar A, Djavanroodi F. Artificial neural network modeling of forming limit diagram. Mater Manuf Processes. 2011;26(11):1415–1422.
   Google Scholar
• Zeng Qingbin, Bie Binglin, Guo Qianni, etal. Hyperpolarized Xe NMR signal advancement by metal-organic framework entrapment in aqueous solution. Proceedings of the National Academy of Sciences. 2020;117(30):17558–17563. http://dx.doi.org/10.1073/pnas.2004121117.
   Google Scholar
• Zhao Chenyang, Cheung Chi Fai, Xu Peng. High-efficiency sub-microscale uncertainty measurement method using pattern recognition. ISA Transactions. 2020;101:503–514. http://dx.doi.org/10.1016/j.isatra.2020.01.038.
   Google Scholar
• Kotkunde N, Deole AD, Gupta AK. Prediction of forming limit diagram for Ti-6Al-4 V alloy using artificial neural network. Procedia Mater Sci. 2014;6:341–346.
   Google Scholar
• Elangovan K, Sathiya Narayanan C, Narayanasamy R. Modelling of forming limit diagram of perforated commercial pure aluminium sheets using artificial neural network. Comput Mater Sci. 2010;47(4):1072–1078.
   Google Scholar
• Qi Bowen, Gao Shouwu, Xu Peilong. The Application of Recycled Epoxy Plastic Sheets Waste to Replace Concrete in Urban Construction and Building. Processes. 2023;11(1):201. http://dx.doi.org/10.3390/pr11010201.
   Google Scholar
• Zhang Haiping, Ouyang Zhiguo, Li Li, et al. Numerical Study on Welding Residual Stress Distribution of Corrugated Steel Webs. Metals. 2022;12(11):1831. http://dx.doi.org/10.3390/met12111831.
   Google Scholar
• Shamloofard M, Assempour A. Development of an inverse isogeometric methodology and its application in sheet metal forming process. Appl Math Model. 2019;73:266–284.
   Google Scholar
• Ghazanfari A, Assempuor A, Habibi M, et al. Investigation on the effective range of the through thickness shear stress on forming limit diagram using a modified Marciniak–Kuczynski model. Modares Mech Eng. 2016;16(1):137–143.
   Google Scholar
• Habibi M, Ghazanfari A, Assempour A, et al. Determination of forming limit diagram using two modified finite element models. Mech Eng. 2017;48(4):141–144.
   Google Scholar
• Amelirad O, Assempour A. Coupled continuum damage mechanics and crystal plasticity model and its application in damage evolution in polycrystalline aggregates. Eng Comput. 2021: 1–15.
   Google Scholar
• Amelirad O, Assempour A. Experimental and crystal plasticity evaluation of grain size effect on formability of austenitic stainless steel sheets. J Manuf Process. 2019;47:310–323.
   Google Scholar
• Massoumi F, Taheri M, Mohammadi A, et al. Evaluation of the effect of buccolingual and apicocoronal positions of dental implants on stress and strain in alveolar bone by finite element analysis. J Dent (Tehran, Iran). 2018;15(1):10. https://doi.org/10.1016/j.chemosphere.2021.133363.
   Google Scholar
• Li Lijun, Liu Wenyao, Wang Yubo, etal. Mechanical performance and damage monitoring of CFRP thermoplastic laminates with an open hole repaired by 3D printed patches. Composite Structures. 2023;303:116308. http://dx.doi.org/10.1016/j.compstruct.2022.116308.
   Google Scholar
• Xu S, Weinmann KJ. On predicting forming limits using hill’s yield criteria. J Mater Eng Perform. 2000;9(2):174–182.
   Google Scholar
• Hosseini S, Habibi M, Assempour A. Experimental and numerical determination of forming limit diagram of steel-copper two-layer sheet considering the interface between the layers. Modares Mech Eng. 2018;18(6):174–181.
   Google Scholar
• Basak S, Panda SK. Necking and fracture limit analyses of different pre-strained sheet materials in polar effective plastic strain locus using Yld2000-2d yield model. J Mater Process Technol. 2019;267:289–307.
   Google Scholar
• Jawale K, Duarte JF, Reis A, et al. Characterizing fracture forming limit and shear fracture forming limit for sheet metals. J Mater Process Technol. 2018;255:886–897.
   Google Scholar
• Yang Z, Zhao C, Dong G, et al. Forming limit prediction of AA7075-T6 sheet based on ductile fracture criterion and the error analysis of parameters calibration. Int J Mater Form. 2021;14(3):341–359.
   Google Scholar
• Naik BS, Ramulu PJ, Narayanan RG. Application of a few necking criteria in predicting the forming limit of unwelded and tailor-welded blanks. J Strain Anal Eng Des. 2010;45(2):79–96.
   Google Scholar
• Zhai Si-Yuan, Lyu Yi-Fan, Cao Ke, etal. Seismic behavior of an innovative bolted connection with dual-slot hole for modular steel buildings. Engineering Structures. 2023;279:115619. http://dx.doi.org/10.1016/j.engstruct.2023.115619.
   Google Scholar
• Xiong Shimin, Li Bin, Zhu Shiao. DCGNN: a single-stage 3D object detection network based on density clustering and graph neural network. Complex & Intelligent Systems. 2022;12:1729. http://dx.doi.org/10.1007/s40747-022-00926-z.
   Google Scholar
• Hashemi R, Ghazanfari A, Abrinia K, et al. Forming limit diagrams of ground St14 steel sheets with different thicknesses. SAE Int J Mat Manuf. 2012;5(1):60–64.
   Google Scholar
• Einolghozati M, Assempour A. A micro mechanical study on tensile behavior of steel sheets with spheroidal cementite using crystal plasticity finite element method. Proc Inst Mech Eng L J Mater Design Appl. 2022;14644207221078990.
   Google Scholar
• Einolghozati M, Assempour A. Mechanical behavior of spheroidized steel sheets: effects of microstructural features, loading, and boundary condition modeling. J Mater Eng Perform. 2022.
   Google Scholar
• Casari F, Tassan M, Messina A, et al. Effect of punch diameter, grid dimension, and lubrication on forming limit diagram. J Test Eval. 2006;34(1):24–30.
   Google Scholar
• Berge F, Krüger L, Ullrich C. Forming limit diagrams of twin-roll cast, rolled and heat-treated AZ31 as a function of temperature and loading rate. Mater Sci Eng A. 2014;614:27–35.
   Google Scholar
• Jie M, Cheng CH, Chan LC, et al. Forming limit diagrams of strain-rate-dependent sheet metals. Int J Mech Sci. 2009;51(4):269–275.
   Google Scholar
• Mamusi H, Bakhshi-Jooybari M, Gorji H, et al. A novel experimental approach in determining forming limit diagrams by considering the effect of normal pressure. Int J Mater Form. 2022;15(1):1. https://doi.org/10.1007/s12289-021-01647-3.
   Google Scholar
• Yang Z, Zhao C, Dong G, et al. Experimental calibration of ductile fracture parameters and forming limit of AA7075-T6 sheet. J Mater Process Technol. 2021;291:Article 117044.
   Google Scholar
• Basak S, Panda SK. Failure strains of anisotropic thin sheet metals: experimental evaluation and theoretical prediction. Int J Mech Sci. 2019;151:356–374.
   Google Scholar
• Dai Zuocai, Zhang Liang, Bolandi Seyedeh Yasaman, etal. On the vibrations of the non-polynomial viscoelastic composite open-type shell under residual stresses. Composite Structures. 2021;263:113599. http://dx.doi.org/10.1016/j.compstruct.2021.113599.
   Google Scholar
• Guo WY, Li J, Jiang XF. Subcritical spheroidization of medium-carbon 50CrV4 steel. J Mater Eng Perform. 2012;21(6):1003–1007.
   Google Scholar
• Habibi Mostafa, Ghazanfari Ahmad, Asempour Ahmad, etal. Determination Of Forming Limit Diageram Using Two Modified Finit Element Models. Amirkabir Journal of Mechanical Engineering. 2016;48(4):379–388. http://dx.doi.org/10.22060/MEJ.2016.664.
   Google Scholar
• Liang Li, Xu Mingfang, Chen Yuhua, etal. Effect of welding thermal treatment on the microstructure and mechanical properties of nickel-based superalloy fabricated by selective laser melting. Materials Science and Engineering: A. 2021;819:14150. http://dx.doi.org/10.1016/j.msea.2021.141507.
   Google Scholar
• Peng Deping, Chen Shun, Darabi Roya, etal. Prediction of the bending and out-of-plane loading effects on formability response of the steel sheets. Archives of Civil and Mechanical Engineering. 2021;21(2):386. http://dx.doi.org/10.1007/s43452-021-00227-1.
   Google Scholar
• Habibi Mostafa, Hashemi Ramin, Ghazanfari Ahmad, etal. Forming limit diagrams by including the M–K model in finite element simulation considering the effect of bending. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2018;232(8):625–636. http://dx.doi.org/10.1177/1464420716642258.
   Google Scholar
• Habibi M, Hashemi R., Fallah Tafti M, etal. Experimental investigation of mechanical properties, formability and forming limit diagrams for tailor-welded blanks produced by friction stir welding. Journal of Manufacturing Processes. 2018;31:310–323. http://dx.doi.org/10.1016/j.jmapro.2017.11.009.
   Google Scholar
• O’Brien JM, Hosford WF. Spheroidization cycles for medium carbon steels. Metal Mater Trans A. 2002;33(4):1255–1261.
   Google Scholar
• Abràmoff MD, Magalhães PJ, Ram SJ. Image processing with ImageJ. Biophotonics Int. 2004;11:36–42.
   Google Scholar
• Habibi Mostafa, Darabi Roya, Sa Jose C de, etal. An innovation in finite element simulation via crystal plasticity assessment of grain morphology effect on sheet metal formability. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2021;235(8):1937–1951. http://dx.doi.org/10.1177/14644207211024686.
   Google Scholar
• Habibi M, Hashemi R., Sadeghi E, etal. Enhancing the Mechanical Properties and Formability of Low Carbon Steel with Dual-Phase Microstructures. Journal of Materials Engineering and Performance. 2016;25(2):382–389. http://dx.doi.org/10.1007/s11665-016-1882-1.
   Google Scholar
• Li Yuesong, Li Shunlei, Guo Kunyi, etal. On the modeling of bending responses of graphene-reinforced higher order annular plate via two-dimensional continuum mechanics approach. Engineering with Computers. 2022;38(S1):703–724. http://dx.doi.org/10.1007/s00366-020-01166-w.
   Google Scholar
• Li Jing, Tang Fei, Habibi Mostafa. Bi-directional thermal buckling and resonance frequency characteristics of a GNP-reinforced composite nanostructure. Engineering with Computers. 2022;38(2):1559–1580. http://dx.doi.org/10.1007/s00366-020-01110-y.
   Google Scholar
• Chen Fujiang, Chen Junying, Duan Rongqian, etal. Investigation on dynamic stability and aeroelastic characteristics of composite curved pipes with any yawed angle. Composite Structures. 2022;284:115195. http://dx.doi.org/10.1016/j.compstruct.2022.115195.
   Google Scholar
• Huo Jiaofei, Zhang Guangpeng, Ghabussi Aria, etal. Bending analysis of FG-GPLRC axisymmetric circular/annular sector plates by considering elastic foundation and horizontal friction force using 3D-poroelasticity theory. Composite Structures. 2021;276:114438. http://dx.doi.org/10.1016/j.compstruct.2021.114438.
   Google Scholar
• Hashemi Hamid Reza, Alizadeh As’ad, Oyarhossein Mohammad Amin, etal. Influence of imperfection on amplitude and resonance frequency of a reinforcement compositionally graded nanostructure. Waves in Random and Complex Media. 2021;31(6):1340–1366. http://dx.doi.org/10.1080/17455030.2019.1662968.
   Google Scholar
• Ebrahimi Farzad, Mohammadi Kianoosh, Barouti Mohammad Mostafa, etal. Wave propagation analysis of a spinning porous graphene nanoplatelet-reinforced nanoshell. Waves in Random and Complex Media. 2021;31(6):1655–1681. http://dx.doi.org/10.1080/17455030.2019.1694729.
   Google Scholar
• Shao Yunhong, Zhao Yang, Gao Jun, etal. Energy absorption of the strengthened viscoelastic multi-curved composite panel under friction force. Archives of Civil and Mechanical Engineering. 2021;21(4http://dx.doi.org/10.1007/s43452-021-00279-3.
   Google Scholar
• Zhang Liang, Chen Zhengxian, Habibi Mostafa, etal. Low-velocity impact, resonance, and frequency responses of FG-GPLRC viscoelastic doubly curved panel. Composite Structures. 2021;269:114000. http://dx.doi.org/10.1016/j.compstruct.2021.114000.
   Google Scholar
• Guo Yuan, Mi Honglin, Habibi Mostafa. Electromechanical energy absorption, resonance frequency, and low-velocity impact analysis of the piezoelectric doubly curved system. Mechanical Systems and Signal Processing. 2021;157:107723. http://dx.doi.org/10.1016/j.ymssp.2021.107723.
   Google Scholar
• Li Mianjie, Tian Zhihong, Du Xiaojiang, etal. Power normalized cepstral robust features of deep neural networks in a cloud computing data privacy protection scheme. Neurocomputing. 2023;518:165–173. http://dx.doi.org/10.1016/j.neucom.2022.11.001.
   Google Scholar
• Liu Hui, Zhao Yao, Pishbin Mohammad, etal. A comprehensive mathematical simulation of the composite size-dependent rotary 3D microsystem via two-dimensional generalized differential quadrature method. Engineering with Computers. 2022;38(S5):4181–4196. http://dx.doi.org/10.1007/s00366-021-01419-2.
   Google Scholar
• Lingamdinne LP, Amelirad O, Koduru JR, et al. Functionalized bentonite for removal of Pb(II) and As(V) from surface water: predicting capability and mechanism using artificial neural network. J Water Proc Eng. 2023;51:Article 103386.
   Google Scholar
• Bai Yu, Alzahrani Bandar, Baharom Shahrizan, etal. Semi-numerical simulation for vibrational responses of the viscoelastic imperfect annular system with honeycomb core under residual pressure. Engineering with Computers. 2022;38(S5):3699–3724. http://dx.doi.org/10.1007/s00366-020-01191-9.
   Google Scholar
• Zhou C, Zhao Y, Zhang J, etal. Vibrational characteristics of multi-phase nanocomposite reinforced circular/annular system. Advances in nano research. 2020;9:295–307.
   Google Scholar