References
- Quirino RL, Ma Y, Larock RC. Oat hull composites from conjugated natural oils. Green Chem. 2012;14:1398–1404.
- Boquillon N, Fringant C. Polymer networks derived from curing of epoxidised linseed oil: influence of different catalysts and anhydride hardeners. Polymer. 2000;41:8603–8613.
- Keles E, Hazer B. Synthesis of segmented polyurethane based on polymeric soybean oil polyol and poly (ethylene glycol). J Polym Environ. 2009;17:153–158.
- Petrovic ZS, Xu YJ, Milic J, et al. Biodegradation of thermoplastic polyurethanes from vegetable oils. J Polym Environ. 2010;18:94–97.
- Cakmakli B, Hazer B, Acikgoz S, et al. PMMA-multigraft copolymers derived from linseed oil, soybean oil, and linoleic acid: protein adsorption and bacterial adherence. J Appl Polym Sci. 2007;105:3448–3457.
- Xia Y, Henna PH, Larock RC. Novel thermosets from the cationic copolymerization of modified linseed oils and dicyclopentadiene. Macromol Mater Eng. 2009;294:590–598.
- Liu ZS, Erhan SZ. Ring-opening polymerization of epoxidized soybean oil. J Am Oil Chem Soc. 2010;87:437–444.
- Zhang J, Hu S, Zhan GZ, et al. Biobased nanocomposites from clay modified blend of epoxidized soybean oil and cyanate ester resin. Prog Org Coat. 2013;76:1683–1690.
- de Espinosa LM, Ronda JC, Galia M, et al. A new enone-containing triglyceride derivative as precursor of thermosets from renewable resources. J Polym Sci Pol Chem. 2008;46:6843–6850.
- Miyagawa H, Mohanty AK, Burgueno R, et al. Development of biobased unsaturated polyester containing functionalized linseed oil. Ind Eng Chem Res. 2006;45:1014–1018.
- Dogan E, Kuesefoglu S. Synthesis and in situ foaming of biodegradable malonic acid ESO polymers. J Appl Polym Sci. 2008;110:1129–1135.
- Miyagawa H, Mohanty AK, Burgueno R, et al. Novel biobased resins from blends of functionalized soybean oil and unsaturated polyester resin. J Polym Sci Pol Phys. 2007;45:698–704.
- Kim JR, Sharma S. The development and comparison of bio-thermoset plastics from epoxidized plant oils. Ind Crops Prod. 2012;36:485–499.
- Supanchaiyamat N, Shuttleworth PS, Hunt AJ, et al. Thermosetting resin based on epoxidised linseed oil and bio-derived crosslinker. Green Chem. 2012;14:1759–1765.
- Tan SG, Ahmad Z, Chow WS. Interpenetrating polymer network structured thermosets prepared from epoxidized soybean oil/diglycidyl ether of bisphenol A. Polym Int. 2014;63:273–279.
- Cateto CA, Barreiro MF, Rodrigues AE, et al. Optimization study of lignin oxypropylation in view of the preparation of polyurethane rigid foams. Ind Eng Chem Res. 2009;48:2583–2589.
- Ma XF, Chang PR, Yu JG. Properties of biodegradable thermoplastic pea starch/carboxymethyl cellulose and pea starch/microcrystalline cellulose composites. Carbohydr Polym. 2008;72:369–375.
- Haafiz MKM, Hassan A, Zakaria Z, et al. Properties of polylactic acid composites reinforced with oil palm biomass microcrystalline cellulose. Carbohydr Polym. 2013;98:139–145.
- Luo XG, Mohanty A, Misra M. Green composites from soy-based biopolyurethane with microcrystalline cellulose. Macromol Mater Eng. 2013;298:412–418.
- Sun XW, Lu CH, Liu Y, et al. Melt-processed poly(vinyl alcohol) composites filled with microcrystalline cellulose from waste cotton fabrics. Carbohydr Polym. 2014;101:642–649.
- Bai W, Li KC. Partial replacement of silica with microcrystalline cellulose in rubber composites. Compos Part A-Appl S. 2009;40:1597–1605.
- He M, Zhou J, Zhang H, et al. Microcrystalline cellulose as reactive reinforcing fillers for epoxidized soybean oil polymer composites. J Appl Polym Sci. 2015;132:42488–42495.
- Siqueira G, Bras J, Dufresne A. New process of chemical grafting of cellulose nanoparticles with a long chain isocyanate. Langmuir. 2010;26:402–411.
- Missoum K, Bras J, Belgacem MN. Organization of aliphatic chains grafted on nanofibrillated cellulose and influence on final properties. Cellulose. 2012;19:1957–1973.
- Watanabe A, Morita S, Kokot S, et al. Drying process of microcrystalline cellulose studied by attenuated total reflection IR spectroscopy with two-dimensional correlation spectroscopy and principal component analysis. J Mol Struct. 2006;799:102–110.
- Liu H, Liu D, Yao F, et al. Fabrication and properties of transparent polymethylmethacrylate/cellulose nanocrystals composites. Bioresour Technol. 2010;101:5685–5692.
- Lin N, Huang J, Chang PR, et al. Surface acetylation of cellulose nanocrystal and its reinforcing function in poly(lactic acid). Carbohydr Polym. 2011;83:1834–1842.
- Wik VM, Aranguren MI, Mosiewicki MA. Castor Oil-based polyurethanes containing cellulose nanocrystals. Polym Eng Sci. 2011;51:1389–1396.
- Xu X, Liu F, Jiang L, et al. Cellulose nanocrystals vs. cellulose nanofibrils: a comparative study on their microstructures and effects as polymer reinforcing agents. ACS Appl Mat Interfaces. 2013;5:2999–3009.
- Dwan'isa JPL, Mohanty AK, Misra M, et al. Biobased polyurethane and its composite with glass fiber. J Mater Sci. 2004;39:2081–2087.
- Qiu WL, Endo T, Hirotsu T. Interfacial interactions of a novel mechanochemical composite of cellulose with maleated polypropylene. J Appl Polym Sci. 2004;94:1326–1335.
- Shogren RL, Petrovic Z, Liu ZS, et al. Biodegradation behavior of some vegetable oil-based polymers. J Polym Environ. 2004;12:173–178.
- Yew GH, Yusof AMM, Ishak ZAM, et al. Water absorption and enzymatic degradation of poly(lactic acid)/rice starch composites. Polym Degrad Stab. 2005;90:488–500.
- Zhang Z, Wu Q, Song K, et al. Using cellulose nanocrystals as a sustainable additive to enhance hydrophilicity, mechanical and thermal properties of poly(vinylidene fluoride)/poly(methyl methacrylate) blend. ACS Sustainable Chem Eng. 2015;3:574–582.