Shape stability of laminated veneer products – An experimental study of the influence on distortion of some material and process parameters

References

• Blomqvist , L. , Johansson , J. and Sandberg , D. 2011 Improving the performance of bended laminated veneer products . In P. Navi and A. Roth COST Action FP0904 Workshop Mechano-chemical Transformation of Wood During THM Processing ( Biel : Bern University of Applied Sciences ), pp. 147 – 148 . ISBN: 978-3-9523787-0-0
   Google Scholar
• Boulton , B. C. 1920 The Manufacture and Use of Plywood & Glue ( London : Sir Isaac Pitman & Sons Ltd ).
   Google Scholar
• Buchelt , B. and Wagenführ , A. 2008 The mechanical behaviour of veneer subjected to bending and tensile loads . Holz als Roh- und Werkstoff , 66 ( 4 ), 289 – 294 . doi: 10.1007/s00107-008-0235-7
   Google Scholar
• Cassens , D. , Leng , Y. and McCabe , G. 2003 Face check development in veneered furniture panels . Forest Products Journal , 53 , 79 – 86 .
   Web of Science ®Google Scholar
• Hvattum , O. , Lind , P. and Osvik , H. 1978 Springback of Laminated Bends , Technical Report 16 ( Norway : Norsk Treteknisk Institut NTI ).
   Google Scholar
• Lind , P. 1981 Corner Joints and Laminated Bends – Movements Causes by Moisture Changes , Technical Report 26 ( Norway : Norsk Treteknisk Institut NTI ).
   Google Scholar
• Marra , A. A. 1992 Technology of Wood Bonding: Principles and Practice ( New York : Van Nostrand Reinhold ), pp. 76 – 77 .
   Google Scholar
• Montgomery , D. C. 1991 Design and Analysis of Experiments , 3rd edn. , ( New York : Wiley ).
   Google Scholar
• Navi , P. and Sandberg , D. 2012 Thermo-hydro-mechanical Processing of Wood ( Lausanne : EPFL Press ).
   Google Scholar
• Ohya , S. , Kitayama , S. and Kawaguchi , M. 1989 The effect of veneer quality on the bending strength of laminated wood . Journal of the Japan Wood Research Society , 35 , 905 – 911 .
   Google Scholar
• Ormarsson , S. and Sandberg , D. 2007 Numerical simulation of hot-pressed veneer products: Moulding, spring-back and distortion . Wood Material Science and Engineering , 2 ( 3–4 ), 130 – 137 . doi: 10.1080/17480270801945355
   Google Scholar
• Srinivasan , N. , Bhattacharyya , D. and Jayaraman , K. 2007 Thermoforming of wood veneer composite sheets . Holzforschung , 61 ( 5 ), 558 – 562 . doi: 10.1515/HF.2007.105
   Web of Science ®Google Scholar
• Srinivasan , N. , Jayaraman , K. and Bhattacharyya , D. 2008 Profile production in multi-veneer sheets by continuous roll forming . Holzforschung , 62 ( 4 ), 453 – 460 . doi: 10.1515/HF.2008.064
   Web of Science ®Google Scholar
• Stevens , W. C. and Turner , N. 1948 Solid and Laminated Wood Bending ( Great Britain : Department of Scientific and Industrial Research, Forest Products Research Laboratory ).
   Google Scholar
• Stevens , W. C. and Turner , N. 1970 Wood Bending Handbook ( Woburn , MA : Woodcraft Supply Corp ), ISBN 0-918036-06-2 .
   Google Scholar
• Suchsland , O. 2004 The Swelling and Shrinkage of Wood. A Practical Technology Primer ( Madison , WI : Forest Products Society ), ISBN1-892529-38-6 .
   Google Scholar
• Suchsland , O. and McNatt , J. D. 1986 Computer simulation of laminated wood panel warping . Forest Products Journal , 36 , 16 – 23 .
   Web of Science ®Google Scholar
• Wagenführ , A. , Buchelt , B. and Pfriem , A. 2006 Material behaviour of veneer during multidimensional moulding . Holz als Roh- und Werkstoff , 64 ( 2 ), 83 – 89 . doi: 10.1007/s00107-005-0008-5
   Google Scholar
• Wu , Z.-H. , Furuno , T. and Yoshihara , H. 1999 Calculation models of pressure and position of curved laminated veneer lumber in molds during pressing . Journal of Wood Science , 45 ( 3 ), 213 – 220 . doi: 10.1007/BF01177728
   Web of Science ®Google Scholar
• Zemiar , J. and Choma , P. 2002 The shape stability of formed laminated wood . Wood Research (DrevarskyVyskum) , 47 , 35 – 43 .
   Google Scholar