190
Views
8
CrossRef citations to date
0
Altmetric
Original Articles

Inverse identification of early- and latewood hydric properties using full-field measurements

, ORCID Icon, &
Pages 50-63 | Received 10 May 2016, Accepted 20 Nov 2016, Published online: 13 Feb 2017

References

  • Agoua, E., Zohoun, S. and Perré, P. (2001) A double climatic chamber used to measure the diffusion coefficient of water in wood in unsteady-state conditions: Determination of the best fitting method by numerical simulation. International Journal of Heat and Mass Transfer, 44(19), 3731–3744.
  • Almeida, G., Assor, C. and Perré, P. (2008) The dynamic of shrinkage/moisture content behavior determined during drying of microsamples for different kinds of wood. Drying Technology, 26(9), 1118–1124.
  • Babiak, M. (1995) Letter to the editors. Is Fick’s law valid for the adsorption of water by wood? Wood Science and Technology, 29(3), 227–229.
  • Badulescu, C., Grédiac, M. and Mathias, J. D. (2009) Investigation of the grid method for accurate in-plane strain measurement. Measurement Science and Technology, 20(9), 095102.
  • Baronas, R. and Ivanauskas, F. (2004) Reducing spatial dimensionality in a model of moisture diffusion in a solid material. International Journal of Heat and Mass Transfer, 47(4), 699–705.
  • Bigorgne, L., Brunet, M., Maigre, H., Simon, P. and Chaudet, P. (2011) Investigation of softwood fracture criteria at the mesoscopic scale. International Journal of Fracture, 172(1), 65–76.
  • Brabec, M., Lagaňa, R., Milch, J., Tippner, J. and Sebera, V. (2017) Utilization of digital image correlation in determining of both longitudinal shear moduli of wood at single torsion test. Wood Science and Technology, 51(1), 29–45.
  • Chauhan, S. S. and Aggarwal, P. (2004) Effect of moisture sorption state on transverse dimensional changes in wood. Holz als Roh- und Werkstoff, 62(1), 50–55.
  • Cramer, S., Kretschmann, D., Lakes, R. and Schmidt, T. (2005) Earlywood and latewood elastic properties in loblolly pine. Holzforschung, 59(5), 531–538.
  • Crank, J. (1975) The Mathematics of Diffusion (Oxford: Oxford University Press).
  • Dang, D., Moutou Pitti, R., Toussaint, E. and Grédiac, M. (2014) Experimental evidence of water diffusion gradient in wood using the grid method. Final Cost Action FP0904 Conference.
  • Dang, D., Toussaint, E., Moutou Pitti, R. and Grédiac, M. (2016) Investigation of the hydric transfer phenomenon in wood at the ring scale with the grid method. In Experimental and Applied Mechanics, Volume 4 (Berlin: Springer), pp. 77–81. doi:10.1007/978-3-319-22449-7_9
  • Gauvin, C., Jullien, D., Doumalin, P., Dupré, J. C. and Gril, J. (2014) Image correlation to evaluate the influence of hygrothermal loading on wood. Strain, 50(5), 428–435.
  • Grédiac, M. (2004) The use of full-field measurement methods in composite material characterization: Interest and limitations. Composites Part A: Applied Science and Manufacturing, 35(7), 751–761.
  • Grédiac, M., Hild, F. and Pineau, A. (eds.) (2013) Index. In Full-Field Measurements and Identification in Solid Mechanics (Hoboken, NJ: John Wiley & Sons, Inc.). doi:10.1002/9781118578469.index
  • Grédiac, M., Sur, F. and Blaysat, B. (2016) The grid method for in-plane displacement and strain measurement: A review and analysis. Strain, 52(3), 205–243.
  • Grédiac, M. and Toussaint, E. (2013). Studying the mechanical behaviour of asphalt mixture with the grid method. Strain, 49(1), 1–15.
  • Hu, M., Johansson, M., Olsson, A., Oscarsson, J. and Enquist, B. (2015) Local variation of modulus of elasticity in timber determined on the basis of non-contact deformation measurement and scanned fibre orientation. European Journal of Wood and Wood Products, 73(1), 17–27.
  • Ishimaru, Y. and Iida, I. (2001) Transverse swelling behavior of Hinoki (chamaecyparis obtusa) revealed by the replica method. Journal of Wood Science, 47(3), 178–184.
  • Lawrence, F. S. and Jacek, K. (2011) Parabolic-elliptic partial differential equations in 1-d. Copyright 1984-2011 The MathWorks, Inc.
  • Liu, J. Y., Simpson, W. T. and Verrill, S. P. (2001) An inverse moisture diffusion algorithm for the determination of diffusion coefficient. Drying Technology, 19(8), 1555–1568.
  • Mazzanti, P., Colmars, J., Gril, J., Hunt, D. and Uzielli, L. (2014) A hygro-mechanical analysis of poplar wood along the tangential direction by restrained swelling test. Wood Science and Technology, 48(4), 673–687.
  • Méité, M., Dubois, F., Pop, O. and Absi, J. (2013) Mixed mode fracture properties characterization for wood by digital images correlation and finite element method coupling. Engineering Fracture Mechanics, 105, 86–100.
  • Merakeb, S. (2006), Modeling of the timber structures in variable environment. PhD thesis, University of Limoge.
  • Moutee, M. (2006), Modeling of the mechanical behaviour of wood during drying. PhD thesis, University of Laval.
  • Moutou Pitti, R., Dubois, F., Sauvat, N. and Fournely, E. (2013) Strain analysis in dried green wood: Experimentation and modelling approaches. Engineering Fracture Mechanics, 105, 182–199.
  • Nakano, T. (1994a) Non-steady state water adsorption of wood: Part 1. A formulation for water adsorption. Wood Science and Technology, 28(5), 359–363.
  • Nakano, T. (1994b) Non-steady state water adsorption of wood: Part 2. Validity of the theoretical equation of water adsorption. Wood Science and Technology, 28(6), 450–456.
  • Nakato, K. (1958a) On the cause of the anisotropic shrinkage and swelling of wood. ix. On the relationship between the microscopic structure and the anisotropic shrinkage in the transverse section (2). Mokuzai Gakkaishi, 4(4), 134–141.
  • Nakato, K. (1958b) On the cause of the anisotropic shrinkage and swelling of wood. vii. On the anisotropic shrinkage in transverse section of the isolated springwood and summerwood. Mokuzai Gakkaishi, 4(94), 100.
  • Nakato, K. and Kajita, S. (1955) On the cause of the anisotropic shrinkage and swelling of wood. vi. On the relationships between the annual ring and the anisotropic shrinkage. Journal of the Japanese Forestry Society, 37(1), 22–25.
  • Nguyen, T. A. (2014), Experimental and numerical approaches to the study of hygroscopic transfers in wood. PhD thesis, Université de Limoges, available at: https://tel.archives-ouvertes.fr/tel-01130828
  • Peck, E. C. (1933) Specific Gravity and Related Properties of Softwood Lumber. Washington: US Dept. of Agriculture, available at: https://naldc.nal.usda.gov/naldc/download.xhtml?id=CAT86200337content=PDF
  • Pereira, J., Xavier, J., Morais, J. and Lousada, J. (2014) Assessing wood quality by spatial variation of elastic properties within the stem: Case study of Pinus pinaster in the transverse plane 1. Canadian Journal of Forest Research, 44(2), 107–117.
  • Perré, P., Houngan, A. and Jacquin, P. (2007) Mass diffusivity of beech determined in unsteady-state using a magnetic suspension balance. Drying Technology, 25(7–8), 1341–1347.
  • Piro, J. L. and Grédiac, M. (2004) Producing and transferring low-spatial-frequency grids for measuring displacement fields with moiré and grid methods. Experimental Techniques, 28(4), 23–26. Society for Experimental Mechanics.
  • Rémond, R., Passard, J. and Perré, P. (2007) The effect of temperature and moisture content on the mechanical behaviour of wood: A comprehensive model applied to drying and bending. European Journal of Mechanics – A/Solids, 26(3), 558–572.
  • Saifouni, O. (2014) Modeling of rheological effects in materials: Application to the mechano-sorptive behaviour of wood. PhD thesis, University of Blaise Pascal – Clermont-Ferrand II. URL: https://tel.archives-ouvertes.fr/tel-01069026
  • Sanabria, S. J., Lanvermann, C., Michel, F., Mannes, D. and Niemz, P. (2015) Adaptive neutron radiography correlation for simultaneous imaging of moisture transport and deformation in hygroscopic materials. Experimental Mechanics, 55(2), 403–415.
  • Söderström, O. (1996) Surface conditions and Fick’s law. Wood Science and Technology, 30(2), 149–151.
  • Tarmian, A., Remond, R., Dashti, H. and Perré, P. (2012) Moisture diffusion coefficient of reaction woods: Compression wood of Picea abies L. and tension wood of Fagus sylvatica l. Wood Science and Technology, 46(1–3), 405–417.
  • Wadsö, L. (1993) Measurements of water vapour sorption in wood: Part 2. Results. Wood Science and Technology, 28(1), 59–65, available at: http://dx.doi.org/10.1007/BF00193877
  • Watanabe, U., Norimoto, M., Fujita, M. and Gril, J. (1998) Transverse shrinkage anisotropy of coniferous wood investigated by the power spectrum analysis. Journal of Wood Science, 44(1), 9–14.
  • Watanabe, U., Norimoto, M., Ohgama, T. and Fujita, M. (1999) Tangential Young’s modulus of coniferous early wood investigated using cell models. Holzforschung, 53(2), 209–214.
  • Xavier, J., Monteiro, P., Morais, J. J. L., Dourado, N. and de Moura, M. F. S. F. (2014) Moisture content effect on the fracture characterisation of Pinus pinaster under mode I. Journal of Materials Science, 49(21), 7371–7381.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.