Performance of samama (Anthocephalus macrophyllus) LVL based on veneer thickness, juvenile proportion and lay-up

References

• Aydın, I., Çolak, S., Çolakoğlu, G. and Salih, E. (2004) A comparative study on some physical and mechanical properties of laminated veneer lumber (LVL) produced from beech (Fagus orientalis Lipsky) and eucalyptus (Eucalyptus camaldulensis Dehn.) veneers. Holz als Roh-und Werkstoff, 62(3), 218–220. doi: 10.1007/s00107-004-0464-3
   Google Scholar
• Barnett, J. and Jeronimidis, G. (2009) Wood Quality and Its Biological Basis (Carlton: John Wiley & Sons).
   Google Scholar
• Burdurlu, E., Kilic, M., Ilce, A. C. and Uzunkavak, O. (2007) The effects of ply organization and loading direction on bending strength and modulus of elasticity in laminated veneer lumber (LVL) obtained from beech (Fagus orientalis L.) and Lombardy poplar (Populus nigra L.). Construction and Building Materials, 21(8), 1720–1725. doi: 10.1016/j.conbuildmat.2005.05.002
   Web of Science ®Google Scholar
• Cahyono, T. D. (2015) Kualitas Kayu Samama (Anthocephalus macrophyllus) dan Peningkatan Kemanfaatannya melalui Teknik Laminasi. Dissertation (Doctoral). Bogor Agricultural University.
   Google Scholar
• Cahyono, T. D. and Masssijaya, M. Y. (2007) Laminated Veneer Lumber (LVL): Sejarah, Penggunaan dan Teknologi. (Bogor: Fakultas Kehutanan IPB).
   Google Scholar
• Cahyono, T. D., Ohorella, S. and Febrianto, F. (2012) Physical and mechanical properties of samama wood (Antocephalus macropylus Roxb.) grown in Mollucas Island. Jurnal Ilmu dan Teknologi Kayu Tropis, 10(1), 28–39.
   Google Scholar
• Cahyono, T. D., Ohorella, S., Febrianto, F., Priadi, T. and Wahyudi, I. (2014) Sifat Fisis dan Mekanis Glulam dari Kayu Samama (physical and mechanical properties of samama wood glulam). Jurnal Ilmu dan Teknologi Kayu Tropis, 12(2), 186–195.
   Google Scholar
• Cahyono, T. D., Wahyudi, I., Priadi, T. and Febrianto, F. (2017) Kualitas Kayu Lapis dari Finir Bagian Juvenil dan Dewasa Samama (Anthocephalus macrophyllus) (The quality of plywood made from juvenile and mature wood veneer of samama (Anthocephalus macrophyllus)). Ilmu dan Teknologi Kayu Tropis, 15(2), 155–166.
   Google Scholar
• Cahyono, T. D., Wahyudi, I., Priadi, T., Febrianto, F., Bahtiar, E. T. and Novriyanti, E. (2016) Analysis on wood quality, geometry factor, and their effects on lathe check of samama (Anthocephalus macrophyllus) veneer. Journal of the Korean Wood Science and Technology, 44(2), 828–841. doi: 10.5658/WOOD.2016.44.6.828
   Google Scholar
• Cahyono, T. D., Wahyudi, I., Priadi, T., Febrianto, F., Darmawan, W., Bahtiar, E. T., Ohorella, S. and Novriyanti, E. (2015) The quality of 8 and 10 years old samama wood (Anthocephalus macrophyllus). Journal of the Indian Academy of Wood Science, 12(1), 22–28. doi: 10.1007/s13196-015-0140-8
   Web of Science ®Google Scholar
• Cha, J.-K. (1990) Properties of 3-layered laminated veneer lumber with crack and grain angle from stress wave tested veneers. Journal of the Korean Wood Science and Technology, 18(3), 17–25.
   Google Scholar
• Cristescu, C. (2006). Bonding of laminated veneers with heat and pressure only. ed. International Conference on Environmentally-Compatible Forest Products: 20/09/2006-22/09/2006, 339–348.
   Google Scholar
• Daoui, A., Descamps, C., Marchal, R. and Zerizer, A. (2011) Influence of veneer quality on beech LVL mechanical properties. Maderas. Ciencia y Tecnología, 13(1), 69–83. doi: 10.4067/S0718-221X2011000100007
   Web of Science ®Google Scholar
• Darmawan, W., Nandika, D., Massijaya, Y., Kabe, A., Rahayu, I., Denaud, L. and Ozarska, B. (2015) Lathe check characteristics of fast growing sengon veneers and their effect on LVL glue-bond and bending strength. Journal of Materials Processing Technology, 215, 181–188. doi: 10.1016/j.jmatprotec.2014.08.015
   Web of Science ®Google Scholar
• de Melo, R. R. and Del Menezzi, C. H. S. (2014) Influence of veneer thickness on the properties of LVL from Paricá (Schizolobium amazonicum) plantation trees. European Journal of Wood and Wood Products, 72(2), 191–198. doi: 10.1007/s00107-013-0770-8
   Web of Science ®Google Scholar
• de Melo, R. R. and Del Menezzi, C. H. S. (2015) Effects of grading of veneers on properties of LVL made from Schizolobium amazonicum Huber ex. Ducke. European Journal of Wood and Wood Products, 73(5), 677–683. doi: 10.1007/s00107-015-0939-4
   Web of Science ®Google Scholar
• Erdil, Y. Z., Kasal, A., Zhang, J., Efe, H. and Dizel, T. (2009) Comparison of mechanical properties of solid wood and laminated veneer lumber fabricated from Turkish beech, Scotch pine, and Lombardy poplar. Forest Products Journal, 59(6), 55–60.
   Web of Science ®Google Scholar
• FAO. (2016) 2015 Global Forest Products Facts and Figures (Rome: Food And Agriculture Organization of The UN).
   Google Scholar
• FONM. (2011) Hutan Tanaman Industri Kayu Samama di Maluku Utara (Ternate (ID): FONM (Forestry Office of North Moluccas Province)).
   Google Scholar
• Harding, O. and Orange, R. (1998) The effect of juvenile wood and lay-up practices on various properties of radiata pine laminated veneer lumber. Forest Products Journal, 48(7–8), 63–70.
   Web of Science ®Google Scholar
• Inoue, M., Kawai, S., Wålinder, M. and Rowell, R. M. (2008) Dimensional stabilization of compressed laminated veneer lumber by hot pressing in an airtight frame. Wood Material Science and Engineering, 3(3–4), 119–125. doi: 10.1080/17480270902975269
   Google Scholar
• JAS. (2003). Japanese Agricultural Standard for Structural Laminated Veneer Lumber. JAS: SE-11 No. 237 (Tokyo: Japanese Agricultural Standar Association).
   Google Scholar
• Kabe, A., Darmawan, W. and Massijaya, M. Y. (2012) Karakteristik Finir Kupas Kayu Sengon (Paraserianthes falcataria) (characteristics of sengon rotary-cut veneer). Jurnal Ilmu dan Teknologi Kayu Tropis, 10(2), 139–149.
   Google Scholar
• Kabe, A., Darmawan, W. and Massijaya, M. Y. (2014) Ciri Finir Kupas Kayu Jabon (Anthocephalus cadamba). Jurnal Ilmu Pertanian Indonesia, 18(3), 133–139.
   Google Scholar
• Kamala, B., Kumar, P., Rao, R. and Sharma, S. (1999) Performance test of laminated veneer lumber (LVL) from rubber wood for different physical and mechanical properties. Holz als Roh-und Werkstoff, 57(2), 114–116. doi: 10.1007/s001070050025
   Google Scholar
• Kelly, M. W. (1977) Critical Literature Review of Relationships Between Processing Parameters and Physical Properties of Particleboard (Washington DC: US Department of Agriculture, Forest Service, Forest Products Laboratory).
   Google Scholar
• Kretschmann, D. E., Moody, R. C., Pellerin, R. F., Bendtsen, B. A., Cahill, J. M., McAlister, R. H. and Sharp, D. W. (1993) Effect of Various Proportions of Juvenile Wood on Laminated Veneer Lumber (Washington DC: US Department of Agriculture, Forest Service, Forest Products Laboratory).
   Google Scholar
• Mattjik, A. A. and Sumertajaya, I. M. (2006) Perancangan percobaan dengan aplikasi SAS dan Minitab (Bogor: IPB Press).
   Google Scholar
• Rahayu, I. (2016) Characteristics of lathe check and surface roughness of fast growing wood veneers and their performance on laminated veneer lumber. Dissertation. Ecole nationale supérieure d'arts et métiers-ENSAM.
   Google Scholar
• Rahayu, I., Darmawan, W., Nugroho, N. and Marchal, R. (2015) The effect of jabon veneer quality on laminated veneer lumber glue bond and bending strength. Jurnal Ilmu dan Teknologi Kayu Tropis, 13(2), 98–110.
   Google Scholar
• Rahayu, I., Denaud, L., Ruelle, J., Darmawan, W., Nugroho, N. and Marchal, R. (2016) The effect of juvenility and veneer thickness on bending strength of Douglas-fir laminated veneer lumber. Journal of the Indian Academy of Wood Science, 13(1), 64–72. doi: 10.1007/s13196-016-0167-5
   Web of Science ®Google Scholar
• Rohumaa, A., Hunt, C. G., Hughes, M., Frihart, C. R. and Logren, J. (2013) The influence of lathe check depth and orientation on the bond quality of phenol-formaldehyde–bonded birch plywood. Holzforschung, 67(7), 779–786. doi: 10.1515/hf-2012-0161
   Web of Science ®Google Scholar
• Tenorio, C., Moya, R. and Muñoz, F. (2011) Comparative study on physical and mechanical properties of laminated veneer lumber and plywood panels made of wood from fast-growing Gmelina arborea trees. Journal of Wood Science, 57(2), 134–139. doi: 10.1007/s10086-010-1149-7
   Web of Science ®Google Scholar
• Tsoumis, G. (1991) Science and Technology of Wood. Structure, Properties, Utilization (New York: Van Nostrand Reinhold).
   Google Scholar