References
- Abe, K., Iwamoto, S. and Yano, H. (2007) Obtaining cellulose nanofibers with a uniform width of 15 nm from wood. Biomacromolecules, 8(10), 3276–3278. doi: https://doi.org/10.1021/bm700624p
- Akrami, A. and Laleicke, P. F. (2018) Densification, screw holding strength, and Brinell hardness of European beech and poplar oriented strand boards. Wood Material Science & Engineering, 13(4), 236–240. doi: https://doi.org/10.1080/17480272.2017.1358764
- Amini, E., Tajvidi, M., Gardner, D. J. and Bousfield, D. W. (2017) Utilization of cellulose nanofibrils as a binder for particleboard manufacture. BioResources, 12(2), 4093–4110. doi: https://doi.org/10.15376/biores.12.2.4093-4110
- Asafu-Adjaye, O., Via, B. K. and Banerjee, S. (2020) Increasing cold Tack of pMDI resin with partial Soy flour substitution. Forest Products Journal, 70(1), 143–144.
- ASTM International. (2012) Standard Test Methods for Evaluating Properties of Wood-base Fiber and Particle Panel Materials. ASTM D1037 (West Conshohocken: ASTM International).
- Cai, Z., Muehl, J. H. and Winandy, J. E. (2006) Effects of panel density and mat moisture content on processing medium density fiberboard. Forest Products Journal, 56(10), 20–25.
- Candan, Z. and Akbulut, T. (2013) Developing environmentally friendly wood composite panels by nanotechnology. BioResources, 8(3), 3590–3598. doi: https://doi.org/10.15376/biores.8.3.3590-3598
- Candan, Z. and Akbulut, T. (2014) Nano-engineered plywood panels: performance properties. Composites Part B: Engineering, 64, 155–161. doi: https://doi.org/10.1016/j.compositesb.2014.04.021
- Candan, Z. and Akbulut, T. (2015) Physical and mechanical properties of nanoreinforced particleboard composites. Maderas. Ciencia y Tecnología, 17(2), 319–334.
- Candan, Z., Gardner, D. J. and Shaler, S. M. (2016) Dynamic mechanical thermal analysis (DMTA) of cellulose nanofibril/nanoclay/pMDI nanocomposites. Composites Part B: Engineering, 90, 126–132. doi: https://doi.org/10.1016/j.compositesb.2015.12.016
- Chen, H., Nair, S. S., Chauhan, P. and Yan, N. (2019) Lignin containing cellulose nanofibril application in pMDI wood adhesives for drastically improved gap-filling properties with robust bondline interfaces. Chemical Engineering Journal, 360, 393–401. doi: https://doi.org/10.1016/j.cej.2018.11.222
- Cui, H. and Li, Q. (2020) Nano–titanium dioxide Coating of Chinese Fir Treated by high-temperature steam to improve the Anticorrosion and surface Hydrophobicity. Forest Products Journal, 70(2), 158–164.
- Cui, J., Lu, X., Zhou, X., Chrusciel, L., Deng, Y., Zhou, H., Zhu, S. and Brosse, N. (2015) Enhancement of mechanical strength of particleboard using environmentally friendly pine (Pinus pinaster L.) tannin adhesives with cellulose nanofibers. Annals of Forest Science, 72(1), 27–32. doi: https://doi.org/10.1007/s13595-014-0392-2
- Diop, C. I. K., Tajvidi, M., Bilodeau, M. A., Bousfield, D. W. and Hunt, J. F. (2017) Evaluation of the incorporation of lignocellulose nanofibrils as sustainable adhesive replacement in medium density fiberboards. Industrial crops and products, 109, 27–36. doi: https://doi.org/10.1016/j.indcrop.2017.08.004
- Fakhri, H. R., Semple, K. E. and Smith, G. D. (2007a) Permeability of OSB. Part I. The effects of core fines content and mat density on transverse permeability. Wood and Fiber Science, 38(3), 450–462.
- Fakhri, H. R., Semple, K. E. and Smith, G. D. (2007b) Transverse permeability of OSB. Part II. Modeling the effects of density and core fines content. Wood and Fiber Science, 38(3), 463–473.
- Garcia, R. A. and Cloutier, A. (2007) Characterization of heat and mass transfer in the mat during the hot pressing of MDF panels. Wood and Fiber Science, 37(1), 23–41.
- Iglesias, M. C., Gomez-Maldonado, D., Via, B. K., Jiang, Z. and Peresin, M. S. (2019) Comparison of kraft and sulfite pulping processes and Their effects on cellulose fibers and nanofibrillated cellulose properties: A Review. Forest Products Journal, 70(1), 10–21.
- Kojima, Y., Kato, N., Ota, K., Kobori, H., Suzuki, S., Aoki, K. and Ito, H. (2018) Cellulose nanofiber as complete natural binder for particleboard. Forest Products Journal, 68(3), 203–210.
- Kumar, A., Gupta, A., Sharma, K. V. and Nasir, M. (2013) Use of aluminum oxide nanoparticles in wood composites to enhance the heat transfer during hot-pressing. European Journal of Wood and Wood Products, 71(2), 193–198. doi: https://doi.org/10.1007/s00107-013-0664-9
- Mahrdt, E., Pinkl, S., Schmidberger, C., van Herwijnen, H. W., Veigel, S. and Gindl-Altmutter, W. (2016) Effect of addition of microfibrillated cellulose to urea-formaldehyde on selected adhesive characteristics and distribution in particle board. Cellulose, 23(1), 571–580. doi: https://doi.org/10.1007/s10570-015-0818-5
- Mantanis, G. I., Athanassiadou, E. T., Barbu, M. C. and Wijnendaele, K. (2018) Adhesive systems used in the European particleboard, MDF and OSB industries. Wood Material Science & Engineering, 13(2), 104–116. doi: https://doi.org/10.1080/17480272.2017.1396622
- Pant, H. and Tewari, A. (2020) Tree biomass and carbon sequestration capacity of Chir-pine (Pinus roxburghii Sarg.). Forest Products Journal, 70(1), 64–71.
- Pichelin, F., Pizzi, A., Fruhwald, A. and Triboulot, P. (2001) Exterior OSB preparation technology at high moisture content-Part 1: transfer mechanisms and pressing parameters. Holz als Roh-und Werkstoff, 59(4), 256–265. doi: https://doi.org/10.1007/s001070100219
- Ren, D. and Frazier, C. E. (2013) Structure–property behavior of moisture-cure polyurethane wood adhesives: Influence of hard segment content. International Journal of Adhesion and Adhesives, 45, 118–124. doi: https://doi.org/10.1016/j.ijadhadh.2013.04.007
- Rojo, E., Peresin, M. S., Sampson, W. W., Hoeger, I. C., Vartiainen, J., Laine, J. and Rojas, O. J. (2015) Comprehensive elucidation of the effect of residual lignin on the physical, barrier, mechanical and surface properties of nanocellulose films. Green Chemistry, 17(3), 1853–1866. doi: https://doi.org/10.1039/C4GC02398F
- Sumardi, I., Ono, K. and Suzuki, S. (2007) Effect of board density and layer structure on the mechanical properties of bamboo oriented strandboard. Journal of Wood Science, 53(6), 510–515. doi: https://doi.org/10.1007/s10086-007-0893-9
- Van,, P. T., Schöpper, C., Klüppel, A. and Mai, C. (2019) Effect of wood and panel density on the properties of lightweight strand boards. Wood Material Science & Engineering. doi: https://doi.org/10.1080/17480272.2019.1705906
- Veigel, S., Rathke, J., Weigl, M. and Gindl-Altmutter, W. (2012) Particle board and oriented strand board prepared with nanocellulose-reinforced adhesive. Journal of Nanomaterials, 2012, 15. doi: https://doi.org/10.1155/2012/158503
- Via, B. K., So, C. L., Shupe, T. F., Groom, L. H. and Wikaira, J. (2009) Mechanical response of longleaf pine to variation in microfibril angle, chemistry associated wavelengths, density, and radial position. Composites Part A: Applied Science and Manufacturing, 40(1), 60–66. doi: https://doi.org/10.1016/j.compositesa.2008.10.007
- Wei, P., Rao, X., Yang, J., Guo, Y., Chen, H., Zhang, Y., Chen, S., Demg, X. and Wang, Z. (2016) Hot pressing of wood-based composites: A review. Forest Products Journal, 66(7), 419–427. doi: https://doi.org/10.13073/FPJ-D-15-00047
- Zhang, M., Wong, E. D., Kawai, S. and Kwon, J. H. (1998) Manufacture and properties of high-performance oriented strand board composite using thin strands. Journal of wood science, 44(3), 191–197. doi: https://doi.org/10.1007/BF00521962