References
- ASTM International (2013) Standard test methods for mechanical properties of lumber and wood-base structural material. ASTM D4761-13. Annual Book of ASTM Standards.
- Buck, D., Wang, X. A., Hagman, O. and Gustafsson, A. (2016) Bending properties of cross laminated timber (CLT) with a 45° alternating layer configuration. BioResources, 11(2), 4633–4644. doi: https://doi.org/10.15376/biores.11.2.4633-4644
- Davids, W. G., Willey, N., Lopez-Anido, R., Shaler, S., Gardner, D., Edgar, R. and Tajvidi, M. (2017) Structural performance of hybrid SPFs-LSL cross-laminated timber panels. Construction and Building Materials, 149, 156–163. doi: https://doi.org/10.1016/j.conbuildmat.2017.05.131
- Derikvand, M., Jiao, H., Kotlarewski, N., Lee, M., Chan, A. and Nolan, G. (2019) Bending performance of nail-laminated timber constructed of fast-grown plantation eucalypt. European Journal of Wood and Wood Products, 77(3), 421–437. doi: https://doi.org/10.1007/s00107-019-01408-9
- EN, B. (2015) 16351: 2015: Timber Structures – Cross Laminated Timber – Requirements. London, UK: BSI Standards Publication, 1–103.
- Fazita, M. N., Khalil, H. A., Izzati, A. N. A. and Rizal, S. (2019) Effects of strain rate on failure mechanisms and energy absorption in polymer composites. In Failure Analysis in Biocomposites, Fibre-Reinforced Composites and Hybrid Composites, pp. 51–78.
- Flores, E. S., Saavedra, K., Hinojosa, J., Chandra, Y. and Das, R. (2016) Multi-scale modelling of rolling shear failure in cross-laminated timber structures by homogenisation and cohesive zone models. International Journal of Solids and Structures, 81, 219–232. doi: https://doi.org/10.1016/j.ijsolstr.2015.11.027
- Gagnon, S. and Pirvu, C. (2011) CLT Handbook: Cross-Laminated Timber.
- He, M., Sun, X. and Li, Z. (2018) Bending and compressive properties of cross-laminated timber (CLT) panels made from Canadian hemlock. Construction and Building Materials, 185, 175–183. doi: https://doi.org/10.1016/j.conbuildmat.2018.07.072
- Hong, K. E. M. (2017) Structural performance of nail-laminated timber-concrete composite floors. Thesis (PhD). University of British Columbia.
- Li, M. (2017) Evaluating rolling shear strength properties of cross-laminated timber by short-span bending tests and modified planar shear tests. Journal of Wood Science, 63(4), 331–337. doi: https://doi.org/10.1007/s10086-017-1631-6
- Liao, Y., Tu, D., Zhou, J., Zhou, H., Yun, H., Gu, J. and Hu, C. (2017) Feasibility of manufacturing cross-laminated timber using fast-grown small diameter eucalyptus lumbers. Construction and Building Materials, 132, 508–515. doi: https://doi.org/10.1016/j.conbuildmat.2016.12.027
- Lu, Z., Zhou, H., Liao, Y. and Hu, C. (2018) Effects of surface treatment and adhesives on bond performance and mechanical properties of cross-laminated timber (CLT) made from small diameter Eucalyptus timber. Construction and Building Materials, 161, 9–15. doi: https://doi.org/10.1016/j.conbuildmat.2017.11.027
- Pangh, H., Hosseinabadi, H. Z., Kotlarewski, N., Moradpour, P., Lee, M. and Nolan, G. (2019) Flexural performance of cross-laminated timber constructed from fibre-managed plantation eucalyptus. Construction and Building Materials, 208, 535–542. doi: https://doi.org/10.1016/j.conbuildmat.2019.03.010
- Sharifnia, H. and Hindman, D. P. (2017) Effect of manufacturing parameters on mechanical properties of southern yellow pine cross laminated timbers. Construction and Building Materials, 156, 314–320. doi: https://doi.org/10.1016/j.conbuildmat.2017.08.122
- Sikora, K. S., McPolin, D. O. and Harte, A. M. (2016) Effects of the thickness of cross-laminated timber (CLT) panels made from Irish Sitka spruce on mechanical performance in bending and shear. Construction and Building Materials, 116, 141–150. doi: https://doi.org/10.1016/j.conbuildmat.2016.04.145
- Song, Y. J. and Hong, S. I. (2018) Performance evaluation of the bending strength of larch cross-laminated timber. Wood Research, 63(1), 105–116.
- Wang, Z., Fu, H., Chui, Y. H. and Gong, M. (2014) Feasilibity of using poplar as cross layer to fabricate cross-laminated timber. In Proceedings of the World Conference on Timber Engineering.
- Wang, Z., Fu, H., Gong, M., Luo, J., Dong, W., Wang, T. and Chui, Y. H. (2017) Planar shear and bending properties of hybrid CLT fabricated with lumber and LVL. Construction and Building Materials, 151, 172–177. doi: https://doi.org/10.1016/j.conbuildmat.2017.04.205
- Wang, Z., Gong, M. and Chui, Y. H. (2015) Mechanical properties of laminated strand lumber and hybrid cross-laminated timber. Construction and Building Materials, 101, 622–627. doi: https://doi.org/10.1016/j.conbuildmat.2015.10.035