Shear capacity of timber-to-timber connections using wooden nails

References

• Alvarez, M., Wagner, H. J., Groenewolt, A., Krieg, O. D., Kyjanek, O., Sonntag, D., Bechert, S., Aldinger, L., Menges, A. and Knippers, J. (2019) The Buga Wood Pavilion - integrative interdisciplinary advancements of digital timber architecture. In 39th ACADIA Conference 2019, Austin, USA.
   Google Scholar
• Bejtka, I. and Blass, H. J. (2002) Joints with inclined screws. In Proceedings of meeting 35 of the working commission W18 – timber structures, CIB. Kyoto, Japan.
   Google Scholar
• Blomberg, J. (2006) Mechanical and physical properties of semi-isostatically densified wood (Doctoral dissertation, Luleå tekniska universitet).
   Google Scholar
• Bouhala, L., Fiorelli, D., Makradi, A., Belouettar, S., Sotayo, A., Bradley, D. F. and Guan, Z. (2020) Advanced numerical investigation on adhesive free timber structures. Composite Structures, 246, 112389.
   Web of Science ®Google Scholar
• Chui, Y. H. and Li, Y. (2005) Modeling timber moment connection under reversed cyclic loading. Journal of Structural Engineering, 131, 1757–1763.
   Web of Science ®Google Scholar
• Conway, M., Mehra, S., Harte, A. M. and O’Ceallaigh, C.. (2021) Densified wood dowel reinforcement of timber perpendicular to the grain: A pilot study. Journal of Structural Integrity and Maintenance, 6(3), 177–186.
   Web of Science ®Google Scholar
• Curtis, W. H. (1918) The Elements of Wood Ship Construction (Philadelphia: Shipping Board, Emergency Fleet Corporation).
   Google Scholar
• El-Houjeyri, I., Thi, V-D., Oudjene, M., Khelifa, M., Rogaume, Y., Sotayo, A. and Guan, Z. (2019) Experimental investigations on adhesive free laminated oak timber beams and timber-to-timber joints assembled using thermo-mechanically compressed wood dowels. Construction and Building Materials, 222, 288–299.
   Web of Science ®Google Scholar
• EN 1995-1-1 (2014) Eurocode 5: Design of Timber Structures – Part 1-1: General – Common Rules and Rules for Buildings (Brussels: European committee for standardization).
   Google Scholar
• EN 26891 (1992) Timber Structures – Joints Made with Mechanical Fasteners. General Principles for the Determination of Strength and Deformation Characteristics (Brussels: European committee for standardization).
   Google Scholar
• EN 338 (2016) Structural Timber – Strength Classes (Brussels: European committee for standardization).
   Google Scholar
• European Commission (2014) Energy Efficient Buildings. Accessed 22 March 2021, available at: https://ec.europa.eu/energy/en/topics/energy-efficiency/buildings.
   Google Scholar
• Fink, G. and Kohler, J. (2011) Multiscale variability of stiffness properties of timber boards. In ICASP Applications of Statistics and Probability in Civil Engineering, Zurich, Switzerland.
   Google Scholar
• Fink, G., Ruan, G. and Filz, G. H. (2019) Sustainable design concepts for short span, timber-only structures. In Proceedings of IASS Annual Symposium 2019 – Structural Membranes 2019: Form and Force, Barcelona, Spain.
   Google Scholar
• Hasan, H., Reddy, A. and Tsayjacobs, A. (2019) Robotic fabrication of nail laminated timber. In Proceedings of the 36th ISARC, Banff, Canada.
   Google Scholar
• Hill, C. A. S. and Dibdiakova, J. (2016) The environmental impact of wood compared to other building materials. International Wood Products Journal, 7(4), 215–219.
   Web of Science ®Google Scholar
• Inoue, M., Adachi K., Kamachi, K. and Yokoi, M. (2010) Development of wooden-based nails for wooden pallet. In Proceedings of the International Convention of Society of Wood Science and Technology and United Nations Economic Commission for Europe - Timber Committee, Geneva, Switzerland.
   Google Scholar
• Jung, K., Kitamori, A. and Komatsu, K. (2008) Evaluation on structural performance of compressed wood as shear dowel. Holzforschung, 62, 461–467.
   Web of Science ®Google Scholar
• Lademann, O. (2018a) Report: Mechanical properties of LIGNOLOC® wooden nails – 4,7mm. Accessed 17 March 2021, available at: https://www.beck-lignoloc.com/fileadmin/user_upload/LignoLoc_VHT_Bericht_4_7mm_EN.PDF.
   Google Scholar
• Lademann, O. (2018b) Report: Mechanical properties of LIGNOLOC® wooden nails – 5,3mm. Accessed 17 March 2021, available at: https://www.beck-lignoloc.com/fileadmin/user_upload/LignoLoc_VHT_Bericht_5_3mm_EN.PDF.
   Google Scholar
• Nelson, L. H. (1996) Early wooden truss connections vs. wood shrinkage: From mortise-and-tenon joints to bolted connections. APT Bulletin: The Journal of Preservation Technology, 27(1/2), 11–23.
   Google Scholar
• Niu, Y., Rasi, K., Hughes, M., Halme, M. and Fink, G. (2021) Prolonging life cycles of construction materials and combating climate change by cascading: The case of reusing timber in Finland. Resources, Conservation & Recycling, 170, 105555.
   Web of Science ®Google Scholar
• Pizzi, A., Leban, J.-M., Kanazawa, F., Properzi, M. and Pichelin, F. (2004) Wood dowel bonding by high-speed rotation welding. Journal of Adhesion Science and Technology, 18(11), 1263–1278.
   Web of Science ®Google Scholar
• Riggio, M., Sandak, J. and Sandak, A. (2016) Densified wooden nails for new timber assemblies and restoration works: A pilot research. Construction and Building Materials, 102, 1084–1092.
   Web of Science ®Google Scholar
• Ruan, G., Filz, G. H. and Fink, G. (2021) An integrated architectural and structural design concept by using local, salvaged timber. In Proceedings of IASS Annual Symposium 2020/21 and the 7th International Conference on Spatial Structure: Inspiring the Next Generation, Guilford, UK. (Accepted for publication)
   Google Scholar
• Sotayo, A., Bradley, D., Bather, M., Sareh, P., Oudjene, M., El-Houjeyri, I., Harte, A. M., Mehra, S., O'Ceallaigh, C., Haller, P., Namari, S., Makradi, A., Belouettar, S., Bouhala, L., Deneufbourg, F. and Guan, Z. (2020) Review of state of the art of dowel laminated timber members and densified wood material as sustainable engineered wood products for construction and building applications. Developments in the Built Environment, 1, 100004.
   Google Scholar
• Thomson, A., Harris, R., Ansell, M. and Walker, P. (2010) Experimental performance of non-metallic mechanically fastened timber connections. The Structural Engineer, 88(17), 25–32.
   Google Scholar