Modeling and optimizing the specific cutting energy of medium density fiberboard during the helical up-milling process

References

• Bhushan, R. K. (2013) Optimization of cutting parameters for minimizing power consumption and maximizing tool life during machining of Al alloy SiC particle composites. Journal of Cleaner Production, 39, 242–254.
   Web of Science ®Google Scholar
• Dong, W., Hu, J., Tian, G., Qiu, X. and Guo, X. (2021) Machine energy utilization rate during milling of PVC/calcium powder/wood fiber composites. Journal of Forestry Engineering, 6, 107–112.
   Google Scholar
• Guedes, T. O., Moreira da Silva, J. R., Gherardi Hein, P. R. and Ferreira, S. C. (2020) Cutting energy required during the mechanical processing of wood species at different drying stages. Maderas-Ciencia Y Tecnologia, 22, 477–482.
   Web of Science ®Google Scholar
• Guo, X., Wang, J., Buck, D., Zhu, Z. and Ekevad, M. (2021a) Cutting forces and cutting quality in the up-milling of solid wood using ceramic cutting tools. International Journal of Advanced Manufacturing Technology, 114, 1575–1584.
   Web of Science ®Google Scholar
• Guo, X., Wang, J., Buck, D., Zhu, Z. and Guo, Y. (2021b) Machinability of wood fiber/polyethylene composite during orthogonal cutting. Wood Science and Technology, 55, 521–534.
   Web of Science ®Google Scholar
• He, Y., Wang, L., Wang, Y., Li, Y., Wang, S., Wang, Y., Liu, C. and Hao, C. (2019) An analytical model for predicting specific cutting energy in whirling milling process. Journal of Cleaner Production, 240, 118181.
   Web of Science ®Google Scholar
• Kamboj, G., Gasparik, M., Gaff, M., Kacik, F., Sethy, A. K., Corleto, R., Razaei, F., Ditommaso, G., Sikora, A., Kaplan, L., Kubs, J., Das, S. and Macku, J. (2020) Surface quality and cutting power requirement after edge milling of thermally modified meranti (Shorea spp.) wood. Journal of Building Engineering, 29, 101213.
   Web of Science ®Google Scholar
• Koleda, P., Barcik, S., Nascak, L. U., Svoren, J. and Stefkova, J. (2019) Cutting power during lengthwise milling of thermally modified oak wood. Wood Research, 64, 545–556.
   Web of Science ®Google Scholar
• Krauss, A., Piernik, M. and Pinkowski, G. (2016) Cutting power during milling of thermally modified pine wood. Drvna Industrija, 67, 215–222.
   Web of Science ®Google Scholar
• Li, R., Yao, Q., Xu, W., Li, J. and Wang, X. (2022) Study of cutting power and power efficiency during straight-tooth cylindrical milling process of particle boards. Materials, 15, 879.
   PubMed Web of Science ®Google Scholar
• Li, W., Xu, Y., Mao, X. and Zhang, Z. (2020) Study on friction performance between wood radial section and cemented carbide surface with different micro-textures. Journal of Forestry Engineering, 5, 122833.
   Google Scholar
• Licow, R., Chuchala, D., Deja, M., Orlowski, K. A. and Taube, P. (2020) Effect of pine impregnation and feed speed on sound level and cutting power in wood sawing. Journal of Cleaner Production, 272, 122833.
   Web of Science ®Google Scholar
• Liu, Q., Gao, D. and Xu, W. (2020) Effect of sanding processes on the surface properties of modified poplar coated by primer compared with mahogany. Coatings, 10, 856.
   Web of Science ®Google Scholar
• Nasir, V. and Cool, J. (2019) Optimal power consumption and surface quality in the circular sawing process of douglas-fir wood. European Journal of Wood and Wood Products, 77, 609–617.
   Web of Science ®Google Scholar
• Nasir, V. and Cool, J. (2020) A review on wood machining: Characterization, optimization, and monitoring of the sawing process. Wood Material Science & Engineering, 15, 1–16.
   Web of Science ®Google Scholar
• Nasir, V. and Cool, J. (2021) Cutting power and surface quality in sawing kiln-dried, green, and frozen hem-fir wood. Wood Science and Technology, 55, 505–519.
   Web of Science ®Google Scholar
• Palubicki, B. (2021) Cutting forces in peripheral Up-milling of particleboard. Materials, 14, 2208.
   PubMed Web of Science ®Google Scholar
• Pinkowski, G., Szymanski, W., Piernik, M. and Krauss, A. (2020) Medium-density fibreboard milling using selected technological parameters. Bioresources, 16, 558–571.
   Web of Science ®Google Scholar
• Prakash, S., Palanikumar, K. and Manoharan, N. (2009) Optimization of delamination factor in drilling medium-density fiberboards (MDF) using desirability-based approach. International Journal of Advanced Manufacturing Technology, 45, 370–381.
   Web of Science ®Google Scholar
• Rajko, L., Koleda, P., Barcik, S. and Koleda, P. (2021) Technical and technological factors’ effects on quality of the machined surface and energetic efficiency when planar milling heat-treated meranti wood. Bioresources, 16, 7884–7900.
   Web of Science ®Google Scholar
• Sedlecky, M. and Gasparik, M. (2017) Power consumption during edge milling of medium-density fiberboard and edge-glued panel. Bioresources, 12, 7413–7426.
   Web of Science ®Google Scholar
• Sedlecký, M., Kvietkova, M. S., Kubš, J. and Kubová, P. (2019) The effect of milling parameters and thermal modification on power input during the milling of thermally modified spruce and oak wood. Bioresources, 14, 669–687.
   Web of Science ®Google Scholar
• Sihag, N. and Sangwan, K. S. (2020) A systematic literature review on machine tool energy consumption. Journal of Cleaner Production, 275, 123125.
   Web of Science ®Google Scholar
• Sun, Q., Zhou, X., Weng, J., Li, X. and Zhou, H. (2021) Numerical simulation and experiment validation for characteristics of gas-solid flow in chip discharging field with vertical milling on MDF. Journal of Forestry Engineering, 6, 25–32.
   Google Scholar
• Wang, Q., Zhang, D., Chen, B., Zhang, Y. and Wu, B. (2019) Energy consumption model for drilling processes based on cutting force. Applied Sciences-Basel, 9, 4801.
   Web of Science ®Google Scholar
• Wellenreiter, P., Hernandez, R. E., Caceres, C. B. and Blais, C. (2022) Effects of helix angle and feed per knife on cutting forces, noise, and power consumption produced during helical planing of sugar maple wood. Canadian Journal of Forest Research, 52, 109–116.
   Google Scholar
• Wu, Y., Wu, X., Yang, F. and Ye, J. (2020a) Preparation and characterization of waterborne UV Lacquer product modified by zinc oxide with flower shape. Polymers, 12, 668.
   PubMed Web of Science ®Google Scholar
• Wu, Y., Zhang, W., Yang, Z. and Wang, Y. (2020b) Influence factors of drilling power of wood structural component. Journal of Forestry Engineering, 5, 36–41.
   Google Scholar
• Wu, Z., Zhang, F., Hu, Y., Zhu, Z. and Guo, X. (2022) Study on helical milling performance of wood-plastic composites. CIRP Journal of Manufacturing Science and Technology, 37, 143–154.
   Web of Science ®Google Scholar
• Xiong, X., Ma, Q., Yuan, Y., Wu, Z. and Zhang, M. (2020) Current situation and key manufacturing considerations of green furniture in China: A review. Journal of Cleaner Production, 267, 121957.
   Web of Science ®Google Scholar
• Yan, X. and Wang, L. (2020) Preparation and performance of a waterborne UV/Al Low infrared emissivity coating. Applied Sciences, 10, 6423.
   Google Scholar
• Yang, Y., Wang, S., Zhang, Y., Zhang, J. and Luo, B. (2020) Wear mechanism and life of brown corundum abrasive belt in wood sanding process. Journal of Forestry Engineering, 5, 121–127.
   Google Scholar
• Yurdakul, M., Gopalakrishnan, K. and Akdas, H. (2014) Prediction of specific cutting energy in natural stone cutting processes using the neuro-fuzzy methodology. International Journal of Rock Mechanics and Mining Sciences, 67, 127–135.
   Web of Science ®Google Scholar
• Zhu, Z., Buck, D., Cao, P., Guo, X. and Wang, J. (2020a) Assessment of cutting forces and temperature in tapered milling of stone–plastic composite using response surface methodology. JOM Journal of the Minerals Metals and Materials Society, 72, 3917–3925.
   Web of Science ®Google Scholar
• Zhu, Z., Buck, D., Guo, X. and Cao, P. (2020b) High-quality and high-efficiency machining of stone-plastic composite with diamond helical cutters. Journal of Manufacturing Processes, 58, 914–922.
   Web of Science ®Google Scholar
• Zhu, Z., Buck, D., Guo, X., Cao, P. and Wang, J. (2020c) Cutting performance in the helical milling of stone-plastic composite with diamond tools. CIRP Journal of Manufacturing Science and Technology, 31, 119–129.
   Web of Science ®Google Scholar