Anatomical and morphological characteristics of beech wood after CO₂-laser cutting

References

• Ashby, M. F. (2012) Materials Selection in Mechanical Design. Butterworth-Heinemann, In 4, Elsevier Ltd, 640. doi:10.1016/C2009-0-25539-5.
   Google Scholar
• Badoniya, P. (2018) CO2 laser cutting of different materials—a review. International Research Journal of Engineering and Technology (IRJET), 5, 1–12.
   Google Scholar
• Barcikowski, S., Koch, G. and Odermatt, J. (2006) Characterisation and modification of the heat affected zone during laser material processing of wood and wood composites. Holz als Roh- und Werkstoff, 64(2), 94–103. doi:10.1007/s00107-005-0028-1
   Google Scholar
• Barnekov, V. G., McMillin, C. W. and Huber, H. A. (1986) Factors influencing laser cutting of wood. Forest Products Journal, 36(1), 55–58.
   Web of Science ®Google Scholar
• Barnekov, V., Huber, H. A. and McMillin, C. W. (1989) Laser machining wood composites. Forest Products Journal, 39(10), 76–78.
   Web of Science ®Google Scholar
• Bekhta, P., Hiziroglu, S. and Shepelyuk, O. (2009) Properties of plywood manufactured from compressed veneer as building material. Materials & Design, 30(4), 947–953. doi:10.1016/j.matdes.2008.07.001
   Web of Science ®Google Scholar
• Brebu, M. and Vasile, C. (2010) Thermal degradation of lignin—a review. Cellulose Chemistry & Technology, 44(9), 353.
   Web of Science ®Google Scholar
• Brémaud, I., Gril, J. and Thibaut, B. (2011) Anisotropy of wood vibrational properties: Dependence on grain angle and review of literature data. Wood Science and Technology, 45(4), 735–754. doi:10.1007/s00226-010-0393-8
   Web of Science ®Google Scholar
• Commandré, J. M., Lahmidi, H., Salvador, S. and Dupassieux, N. (2011) Pyrolysis of wood at high temperature: The influence of experimental parameters on gaseous products. Fuel Processing Technology, 92(5), 837–844. doi:10.1016/j.fuproc.2010.07.009
   Web of Science ®Google Scholar
• Dolan, J. A. (2014) Characterization of laser modified surfaces for wood adhesion (Doctoral dissertation, Virginia Tech).
   Google Scholar
• Eltawahni, H. A., Olabi, A. G. and Benyounis, K. Y. (2011) Investigating the CO2 laser cutting parameters of MDF wood composite material. Optics & Laser Technology, 43(3), 648–659. doi:10.1016/j.optlastec.2010.09.006
   Web of Science ®Google Scholar
• Forest Products Laboratory (US) (1987) Wood Handbook: Wood as an Engineering Material (No. 72). The Laboratory.
   Google Scholar
• Funck, J. W., Forrer, J. B., Buttler, D. A., Brunner, C. C. and Maristany, A. G. (1992) Measuring surface roughness on wood: A comparison of laser-scatter and stylus-tracing approaches. The International Society for Optical Engineering (SPIE), 1821, 173–184.
   Google Scholar
• Ghany, K. A. and Newishy, M. (2005) Cutting of 1.2 mm thick austenitic stainless-steel sheet using pulsed and CW Nd: YAG laser. Journal of Materials Processing Technology, 168(3), 438–447. doi:10.1016/j.jmatprotec.2005.02.251
   Web of Science ®Google Scholar
• Gurau, L. and Petru, A. (2018) The influence of CO2 laser beam power output and scanning speed on surface quality of Norway maple (Acer platanoides). BioResources, 13(4), 8168–8183. doi:10.15376/biores.13.4.8168-8183
   Web of Science ®Google Scholar
• Gurau, L., Mansfield-Williams, H. and Irle, M. (2006) Filtering the roughness of a sanded wood surface. Holz als Roh- und Werkstoff, 64(5), 363–371. doi:10.1007/s00107-005-0089-1
   Google Scholar
• Haller, P., Beyer, E., Wiedemann, G., Panzner, M. and Wust, H. (2001, April) Experimental study of the effect of a laser beam on the morphology of wood surfaces. In First International Conference of the European Society for Wood Mechanics, 19Á21 April, Lausanne, Switzerland. Accessed 9 January 2002, available at: https://www.researchgate.net/publication/237543545
   Google Scholar
• Hazır, E. and Koç, K. H. (2016) Optimization of wood surface machining parameters in CNC routers: Response surface methodology (RSM) approach. International Journal of Scientific Research Engineering & Technology, 5(10), 494–501.
   Google Scholar
• Hernandez-Castaneda, J. C., Sezer, H. K. and Li, L. (2011) The effect of moisture content in fibre laser cutting of pine wood. Optics and Lasers in Engineering, 49(9-10), 1139–1152. doi:10.1016/j.optlaseng.2011.05.008
   Web of Science ®Google Scholar
• Hirata, S., Ohta, M. and Honma, Y. (2001) Hardness distribution on wood surface. Journal of Wood Science, 47(1), 1–7. doi:10.1007/BF00776637
   Web of Science ®Google Scholar
• Hiziroglu, S. (1996) Surface roughness analysis of wood composites: A stylus method. Forest Products Journal, 46(7, 8), 67.
   Web of Science ®Google Scholar
• Hiziroglu, S. and Graham, M. (1998) Effect of press closing time and target thickness on surface roughness of particleboard. Forest Products Journal, 48(3), 50.
   Web of Science ®Google Scholar
• ISO 13061-1. (2014) Physical and mechanical properties of wood - test methods for small clear wood specimens - Part 1: Determination of moisture content for physical and mechanical tests.
   Google Scholar
• ISO, E. 4287. (2009) Geometrical product specifications (GPS). Surface texture. Profile method. Terms. Definitions and surface texture parameters. International Organization for Standardization. 1997+ Amd1: 2009.
   Google Scholar
• Kačík, F. and Kubovský, I. (2011) Chemical changes of beech wood due to CO2 laser irradiation. Journal of Photochemistry and Photobiology A: Chemistry, 222(1), 105–110. doi:10.1016/j.jphotochem.2011.05.008
   Web of Science ®Google Scholar
• Kilic, M., Hiziroglu, S. and Burdurlu, E. (2006) Effect of machining on surface roughness of wood. Building and Environment, 41(8), 1074–1078. doi:10.1016/j.buildenv.2005.05.008
   Web of Science ®Google Scholar
• Korkut, I. and Donertas, M. A. (2007) The influence of feed rate and cutting speed on the cutting forces, surface roughness and tool–chip contact length during face milling. Materials & Design, 28(1), 308–312. doi:10.1016/j.matdes.2005.06.002
   Web of Science ®Google Scholar
• Kubovský, I. and Kačík, F. (2013) Changes of the wood surface colour induced by CO2 laser and its durability after the xenon lamp exposure. Wood Research, 58(4), 581–590. Available online: http://www.woodresearch.sk/wr/ 201304/07.pdf (accessed on 21 January 2014).
   Web of Science ®Google Scholar
• Kubovský, I., Krišťák, Ľ, Suja, J., Gajtanska, M., Igaz, R., Ružiak, I. and Réh, R. (2020) Optimization of parameters for the cutting of wood-based materials by a CO2 laser. Applied Sciences, 10(22), 8113. doi:10.3390/app10228113
   Google Scholar
• Lazić, B. D., Pejić, B. M., Kramar, A. D., Vukčević, M. M., Mihajlovski, K. R., Rusmirović, J. D. and Kostić, M. M. (2018) Influence of hemicelluloses and lignin content on structure and sorption properties of flax fibers (Linum usitatissimum L.). Cellulose, 25(1), 697–709. doi:10.1007/s10570-017-1575-4
   Web of Science ®Google Scholar
• Leban, J. M. and Triboulot, P. (1994) Défauts de forme et états de surface.
   Google Scholar
• Lum, K. C. P., Ng, S. L. and Black, I. (2000) CO2 laser cutting of MDF: 1. Determination of process parameter settings. Optics & Laser Technology, 32(1), 67–76. doi:10.1016/S0030-3992(00)00020-7
   Web of Science ®Google Scholar
• MacLean, J. D. (1941) Thermal conductivity of wood. In Heating, Piping & Air Conditioning, 13, 380–391.
   Google Scholar
• McMillin, C. W. and Harry, J. E. (1971) Laser machining of southern pine. Forest Products Journal, 21(10), 35–37.
   Google Scholar
• Merrild, H. and Christensen, T. H. (2009) Recycling of wood for particle board production: accounting of greenhouse gases and global warming contributions. Waste Management & Research: The Journal for a Sustainable Circular Economy, 27(8), 781–788.
   Google Scholar
• Peters, C. C. and Banas, C. M. (1977) Cutting wood and wood-base products with a multikilowatt CO2 laser. Forest Production, 27(11), 41–45.
   Web of Science ®Google Scholar
• Piili, H., Hirvimäki, M., Salminen, A. and Lindell, H. (2009) Repeatability of laser cutting of uncoated and coated boards. In Proceedings of the NOLAMP (conference paper, Copenhagen), pp. 24–26.
   Google Scholar
• Powell, J. (1993) CO2 Laser Cutting (Vol. 214) (London: Springer-Verlag).
   Google Scholar
• Powell, J. and Kaplan, A. (2004, April) Laser cutting: from first principles to the state of the art. In Pacific International Conference on Applications of Lasers and Optics (Vol. 2004, No. 1) (Laser Institute of America), p. 101. doi:10.1007/s00226-010-0393-8
   Google Scholar
• Quintero, F., Riveiro, A., Lusquiños, F., Comesaña, R. and Pou, J. (2011a) Feasibility study on laser cutting of phenolic resin boards. Physics Procedia, 12, 578–583. doi:10.1016/j.phpro.2011.03.073
   Google Scholar
• Quintero, F., Riveiro, A., Lusquiños, F., Comesaña, R. and Pou, J. (2011b) CO2 laser cutting of phenolic resin boards. Journal of Materials Processing Technology, 211(11), 1710–1718. doi:10.1016/j.jmatprotec.2011.05.014
   Web of Science ®Google Scholar
• Rowell, R. M. (2005) Handbook of Wood Chemistry and Wood Composites (Baco raton: CRC Press).
   Google Scholar
• Thibaut, B., Denaud, L., Collet, R., Marchal, R., Beauchêne, J., Mothe, F., Méausoone, P. J., Martin, P., Larricq, P. and Eyma, F. (2016) Wood machining with a focus on French research in the last 50 years. Annals of Forest Science, 73(1), 163–184.
   Web of Science ®Google Scholar
• Thoma, H., Peri, L. and Lato, E. (2015) Evaluation of wood surface roughness depending on species characteristics. Maderas. Ciencia y tecnología, 17(2), 285–292.
   Web of Science ®Google Scholar
• Vay, O., De Borst, K., Hansmann, C., Teischinger, A. and Müller, U. (2015) Thermal conductivity of wood at angles to the principal anatomical directions. Wood Science and Technology, 49(3), 577–589. doi:10.1007/s00226-015-0716-x
   Web of Science ®Google Scholar