A novel method and validation for obtaining the optimal interference fit of round-end mortise-and-tenon joint

References

• ASTM D 2395-17 (2022) Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials (West Conshohocken, PA, USA: ASTM International).
   Google Scholar
• ASTM D 4442-20 (2020) Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials (West Conshohocken, PA, USA: ASTM International).
   Google Scholar
• Derikvand, M., Smardzewski, J., Ebrahimi, G., Dalvand, M. and Maleki, S. (2013) Withdrawal force capacity of mortise and loose tenon T-type furniture joints. Turkish Journal of Agriculture and Forestry, 37(3), 377–384.
   Web of Science ®Google Scholar
• Diler, H., Acar, M., Balikci, E., Demirci, S. and Erdil, Y. Z. (2017) Withdrawal force capacity of T-type furniture joints constructed from various heat-treated wood species. Bioresources, 12(4), 7466–7478.
   Web of Science ®Google Scholar
• Džinčić, I. and Skakić, D. (2012) Influence of type of fit on strength and deformation of oval tenon-mortise joint. Wood Research, 57, 10.
   Web of Science ®Google Scholar
• Džinčić, I. and Živanić, D. (2014) The influence of fit on the distribution of glue in oval tenon/mortise joint. Wood Research, 59, 6.
   Web of Science ®Google Scholar
• Eckelman, C. A. (2003) Textbook of Product and Strength Design of Furniture (West Lafayette, IN: Purdue University).
   Google Scholar
• Eckelman, C. A., Erdil, Y. Z. and Haviarova, E. (2003) School chairs for developing countries: designing for strength and durability, simplicity, and ease of construction. Forest Products Journal, 53(2), 63–70.
   Web of Science ®Google Scholar
• Eckelman, C. A. and Haviarova, E. (2006) Performance tests of school chairs constructed with round mortise and tenon joints. Forest Products Journal, 56(3), 51–57.
   Web of Science ®Google Scholar
• Eckelman, C. A., Haviarova, E., Tankut, A., Denizli, N., Akcay, H. and Erdil, Y. (2004) Withdrawal capacity of pinned and unpinned round mortise and tenon furniture joints. Forest Products Journal, 54(12), 185–191.
   Web of Science ®Google Scholar
• Elek, L., Kovács, Z., Csóka, L. and Agarwal, C. (2020) Evaluation of the effect of optimal fit criteria on the compressive strength of open mortise and tenon corner joints. European Journal of Wood and Wood Products, 78(2), 351–363.
   Web of Science ®Google Scholar
• Erdil, Y., Eckelman, C. and Haviarova, E. (2009) Design and construction of school work tables for developing countries. Forest Products Journal, 59(1–2), 50–56.
   Web of Science ®Google Scholar
• Fu, W.-L. and Guan, H.-Y. (2022) Numerical and theoretical analysis of the contact force of oval mortise and tenon joints concerning outdoor wooden furniture structure. Wood Science and Technology, 56(05), 1–33.
   Google Scholar
• Fu, W.-L., Guan, H.-Y., Li, W., Sawata, K. and Zhao, Y. (2022) Elastoplastic performance of wood under compression load considering cross-grain orientation and moisture content. European Journal of Wood and Wood Products. https://doi.org/10.1007/s00107-022-01880-w.
   Google Scholar
• Hajdarevic, S., Obućina, M., Mesic, E. and Martinovic, S. (2020) Strength and stiffness analyses of standard and double mortise and tenon joints. Bioresources, 15(4), 8249–8267.
   Web of Science ®Google Scholar
• Hu, W. and Guan, H. (2019) A finite element model of semi-rigid mortise-and-tenon joint considering glue line and friction coefficient. Journal of Wood Science, 65(1), 14.
   Web of Science ®Google Scholar
• Hu, W. and Liu, N. (2020a) Comparisons of finite element models used to predict bending strength of mortise-and-tenon joints. Bioresources, 15, 5801–5811.
   Web of Science ®Google Scholar
• Hu, W. and Liu, N. (2020b) Numerical and optimal study on bending moment capacity and stiffness of mortise-and-tenon joint for wood products. Forests, 11(5), 501.
   Web of Science ®Google Scholar
• Hu, W., Liu, N. and Guan, H. (2019) Experimental study of the contact forces and deformations of mortise-and-tenon joints considering the fits and grain orientations of the tenon. Bioresources, 14, 8728–8737.
   Web of Science ®Google Scholar
• Hu, W. and Zhang, J. (2022) Effect of growth rings on acoustic emission characteristic signals of southern yellow pine wood cracked in mode I. Construction and Building Materials, 329, 12709.
   Web of Science ®Google Scholar
• Kasal, A., Haviarova, E., Efe, H., Eckelman, C. A. and Erdil, Y. Z. (2013) Effect of adhesive type and tenon size on bending moment capacity and rigidity of T-shaped furniture joints constructed of Turkish beech and scots pine. Wood and Fiber Science, 45(3), 287–293.
   Web of Science ®Google Scholar
• Kasal, A., Smardzewski, J., Kuşkun, T. and Erdil, Y. Z. (2016) Numerical analyses of various sizes of mortise and tenon furniture joints. BioResources, 11(3), 6836–6853.
   Web of Science ®Google Scholar
• Krzyżaniak, Ł., Kuşkun, T., Kasal, A. and Smardzewski, J. (2021) Analysis of the internal mounting forces and strength of newly designed fastener to joints wood and wood-based panels. Materials, 14, 23.
   Web of Science ®Google Scholar
• Krzyżaniak, Ł. and Smardzewski, J. (2021) Impact damage response of L-type corner joints connected with new innovative furniture fasteners in wood-based composites panels. Composite Structures, 255, 113008.
   Web of Science ®Google Scholar
• Li, S. and Hu, W. (2023) Study on mechanical strength of cantilever handrail joints for chair. Bioresources, 18, 209–219.
   Web of Science ®Google Scholar
• Li, M., Zhang, S., Wang, Y. and Ren, H. (2021) Effect of microstructures on the shear strength of Larix kaempferi. Forests, 12(7), Article 7.
   Web of Science ®Google Scholar
• Mougel, E., Segovia, C., Pizzi, A. and Thomas, A. (2011) Shrink-fitting and dowel welding in mortise and tenon structural wood joints. Journal of Adhesion Science and Technology, 25(1-3), 213–221.
   Web of Science ®Google Scholar
• Ratnasingam, J. and Ioras, F. (2013) Effect of adhesive type and glue-line thickness on the fatigue strength of mortise and tenon furniture joints. European Journal of Wood and Wood Products, 71(6), 819–821.
   Web of Science ®Google Scholar
• Ratnasingam, J. and Ioras, F. (2015) The fatigue characteristics of two-pin moment-resisting dowel furniture joints with different assembly time and glueline thickness. European Journal of Wood and Wood Products, 73(2), 279–281.
   Web of Science ®Google Scholar
• Reilly, D. T. and Burstein, A. H. (1975) The elastic and ultimate properties of compact bone tissue. Journal of Biomechanics, 8(6), 393–405.
   PubMed Web of Science ®Google Scholar
• Renbutsu, T. and Koizumi, A. (2018) Withdrawal properties of glued, round, mortise and tenon joints using greenwood shrinkage as a clamping pressure. Mokuzai Gakkaishi, 64(5), 187–194.
   Web of Science ®Google Scholar
• Smardzewski, J. (2008) Effect of wood species and glue type on contact stresses in a mortise and tenon joint. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 222(12), 2293–2299.
   Web of Science ®Google Scholar
• Tabarsa, T. and Chui, Y. H. (2001) Characterizing microscopic behavior of wood under transverse compression. Part II. Effect of species and loading direction. Wood and Fiber Science, 33(2), 223–232.
   Web of Science ®Google Scholar
• Tankut, A. and Denizli Tankut, N. (2005) The effects of joint forms (shape) and dimensions on the strengths of mortise and tenon joints. Turkish Journal of Agriculture and Forestry, 29, 493–498.
   Google Scholar
• Uysal, M., Haviarova, E. and Eckelman, C. (2015) A comparison of the cyclic durability, ease of disassembly, repair, and reuse of parts of wooden chair frames. Materials & Design, 87, 75–81.
   Web of Science ®Google Scholar
• Wu, Z. H. (2019) Wooden Furniture Manufacturing Technology (3rd ed). (Beijing: China Forestry Publishing House).
   Google Scholar
• Záborský, V., Borůvka, V., Kašičková, V. and Ruman, D. (2017) Effect of wood species, adhesive type, and annual ring directions on the stiffness of rail to leg mortise and tenon furniture joints. BioResources, 12(4), 7016–7031.
   Web of Science ®Google Scholar
• Zhang, T. and Hu, W. (2021) Numerical study on effects of tenon sizes on withdraw load capacity of mortise and tenon joint. Wood Research, 66(2), 321–330.
   Web of Science ®Google Scholar
• Zhong, S. and Guan, H. (2007) Relationship between optimal value of interference fit and wood density in oval-tenon joint. China Forestry Science and Technology, 2007(2), 57–59.
   Google Scholar