Effects of physical parameters on the temperature and vapor-pressure behavior of bamboo scrimber during hot-pressing

References

• Anderson, J. P. and Altan, M. C. (2015) Formation of voids in composite laminates: Coupled effect of moisture content and processing pressure. Polymer Composites, 36(2), 376–384.
   Web of Science ®Google Scholar
• Bolton, A. J., Humphrey, P. E. and Kavvouras, P. K. (1989) The hot pressing of dry-formed wood-based composites: part III. Predicted vapour pressure and temperature variation with time, compared with experimental data for laboratory boards. Holzforschung, 43, 265–274.
   Web of Science ®Google Scholar
• Chen, J. P., Mario, G., Shi, M. H., Jiang, X. S. and Zhou, H. P. (2021) A comprehensive overview of bamboo scrimber and its new development in China. European Journal of Wood and Wood Products, 79(2), 363–379.
   Web of Science ®Google Scholar
• Cheng, Z., Smith, G. D. and Dai, C. P. (2009) Characterizing hydro-thermal compression behavior of aspen wood strands. Holzforschung, 63(5), 609–617.
   Web of Science ®Google Scholar
• Dai, C. P., Yu, C. M., Xu, C. Y. and He, G. B. (2007) Heat and mass transfer in wood composite panels during hot pressing: Part 4. Experimental investigation and model validation. Holzforschung, 36(1), 195–188.
   Google Scholar
• Dai, C. P., Yu, C. M. and Zhou, X. Y. (2005) Heat and mass transfer in wood composite panels during hot pressing. Part II. Modeling void formation and mat permeability. Wood and Fiber Science: Journal of the Society of Wood Science and Technology, 37(2), 242–257.
   Web of Science ®Google Scholar
• Dixon, P. G., Semple, K. E., Kutnar, A., Kamke, F. A., Smith, G. D. and Gibson1, L. J. (2016) Comparison of the flexural behavior of natural and thermo-hydro-mechanically densified Moso bamboo. European Journal of Wood and Wood Products, 74(5), 1–10.
   Web of Science ®Google Scholar
• Garcia, P. J., Avramidis, S. and Lam, F. (2001) Internal temperature and pressure responses to flake alignment during hot-pressing. Holz als Roh- und Werkstoff, 59(4), 272–275.
   Google Scholar
• Garcia, P. J., Avramidis, S. and Lam, F. (2003) Horizontal gas pressure and temperature distribution responses to OSB flake alignment during hot-pressing. Holz als Roh- und Werkstoff, 61(6), 425–431.
   Google Scholar
• Gu, L., Zhou, Y. F., Mei, T. T., Zhou, G. M. and Xu, L. (2019) Carbon footprint analysis of bamboo scrimber flooring—implications for carbon sequestration of bamboo forests and Its products. Forests, 10(1), 51.
   Web of Science ®Google Scholar
• He, G. B. and Riedl, B. (2004) Curing kinetics of phenol formaldehyde resin and wood-resin interactions in the presence of wood substrates. Wood Science and Technology, 38(1), 69–81.
   Web of Science ®Google Scholar
• He, G. B., Riedl, B. and Abdellatif, A. (2003) Curing process of powdered phenol-formaldehyde resol resins and the role of water in the curing systems. Journal of Applied Polymer Science, 89(5), 1371–1378.
   Web of Science ®Google Scholar
• Hu, Y., He, M., Kate, S. and Chen, M. (2021) Characterizing mat formation of bamboo fiber composites: horizontal density distribution. Materials, 14(5), 1198.
   PubMed Web of Science ®Google Scholar
• Huang, P. X., Chang, W. S., Ansell, M. P., Bowen, C. R., Chew, J. and Adamaki, V. (2018) Thermal and hygroscopic expansion characteristics of bamboo. Proceedings of the Institution of Civil Engineers, 171(6), 463–471.
   Google Scholar
• Huang, Y. X., Ji, Y. H. and Yu, W. J. (2019a) Development of bamboo scrimber: a literature review. Journal of Wood Science, 46(1), 68–74.
   Google Scholar
• Huang, Y. X., Lin, Q. Q., Yang, C., Bian, G. M. and Yu, W. J. (2019b) Multi-scale characterization of bamboo bonding interfaces with phenol-formaldehyde resin of different molecular weight to study the bonding mechanism. Journal of The Royal Society, 17(162), 20199755.
   Web of Science ®Google Scholar
• Huang, Z. J. and Sun, Y. M. (2020) Hygrothermal performance comparison study on bamboo and timber construction in Asia-Pacific bamboo areas. Construction and Building Materials, 271(9), 121602.
   Google Scholar
• Jin, F., Song, G. Q. and Shao, Z. P. (2020) Rheological parameters and characteristics of bamboo in compression perpendicular to grain under hot-pressing process. Mechanics of Time-Dependent Materials, 25, 313–325.
   Web of Science ®Google Scholar
• Kadivar, M., Gauss, C., Mármol, G., Sá, A. and Savastano, H. (2019) The influence of the initial moisture content on densification process of D. asper bamboo: Physical-chemical and bending characterization. Construction and Building Materials, 229, 116896.
   Web of Science ®Google Scholar
• Kumar, A., Vlach, T., Laiblova, L., Hrouda, M., Kasal, B., Tywoniak, J. and Hajek, P. (2016) Engineered bamboo scrimber: influence of density on the mechanical and water absorption properties. Construction and Building Materials, 127(30), 815–827.
   Google Scholar
• Lei, Y. F. (2005) Study on the Heat-Transfer Properties of Flakeboard during hot-Pressing (Beijing, China: Beijing Forestry University).
   Google Scholar
• Li, Q., Yang, M. G., Chen, B. L. and Zhang, H. M. (2011) Effect of technological parameter on performance of recombined bamboo materials. Journal of Fujian College of Forestry, 31(2), 189–192.
   Google Scholar
• Meng, F. D., Liu, R., Zhang, Y. H., Huang, Y. X., Yu, Y. and Yu, W. (2017) Improvement of the water repellency, dimensional stability, and biological resistance of bamboo-based fiber reinforced composites. Polymer Composites, 40(2), 506–513.
   Web of Science ®Google Scholar
• Minhas, A. H., Ullah, N., Riaz, A. A., Abualnaja, K. M., Althubeiti, K. and Muhammad, R. (2021) Experimental investigation of vertical density profile of medium density fiberboard in hot press. Applied Sciences, 11(22), 10769.
   Google Scholar
• Nguyen, D. V., Nguyen, T. T. H., Kubota, S. and Suzuki, S. (2021) Effects of size and type of raw material on temperature and vapour pressure behaviour of wood-based panels during hot-pressing. Wood Material Science and Engineering, 17(6), 702–711.
   Web of Science ®Google Scholar
• Nkeuwa, W. N., Zhang, J. L., Semple, K. E., Chen, M. L., Xia, Y. L. and Dai, C. P. (2022) Bamboo-based composites: A review on fundamentals and processes of bamboo bonding. Composites Part B Engineering, 235, 109776.
   Web of Science ®Google Scholar
• Qiu, H. Y., Xu, J. F., He, Z. B., Long, L. and Yue, X. P. (2019) Bamboo as an emerging source of raw material for household and building products. Bioresources, 14(2), 2465–2467.
   Web of Science ®Google Scholar
• Rao, F., Ji, Y. H., Huang, Y. X., Li, N. and Yu, W. (2021) Influence of resin molecular weight on bonding interface, water resistance, and mechanical properties of bamboo scrimber composite. Construction and Building Materials, 292, 123458.
   Web of Science ®Google Scholar
• Rofii, M. N., Kubota, S., Kobori, H., Kojima, Y. and Suzuki, S. (2016) Furnish type and mat density effects on temperature and vapor pressure of wood-based panels during hot pressing. Journal of Wood Science, 62, 168–173.
   Web of Science ®Google Scholar
• Rofii, M. N., Yamamoto, N., Ueda, S., Kojima, Y. and Suzuki, S. (2014) The temperature behaviour inside the mat of wood-based panel during hot pressing under various manufacturing conditions. Journal of Wood Science, 60(6), 414–420.
   Web of Science ®Google Scholar
• Steffen, A., Haas, G. V., Rapp, A. and Thömen, P. (1999) Temperature and gas pressure in MDF-mats during industrial continuous hot pressing. European Journal of Wood and Wood Products, 57(2), 154–155.
   Google Scholar
• Sun, Y. H., Zhang, Y. H., Huang, Y. X., Wei, X. X. and Yu, W. J. (2020) Influence of board density on the physical and mechanical properties of bamboo oriented strand lumber. Forests, 11(5), 567.
   Web of Science ®Google Scholar
• Thoemen, H. and Humphrey, P. (2006) Modeling the physical processes relevant during hot pressing of wood-based composites. Part I. Heat and mass transfer. Holz als Roh- und Werkstoff, 64(2), 1–10.
   Google Scholar
• Xin, C. B., Li, M., Gu, Y. Z., Li, Y. X. and Zhang, Z. G. (2011) Measurement and analysis on in-plane and through-thickness air permeation of fiber/resin prepreg. Journal of Reinforced Plastics and Composites, 30(17), 1467–1479.
   Web of Science ®Google Scholar
• Yan, Y., Fei, B. H. and Liu, S. Q. (2020) The relationship between moisture content and shrinkage strain in the process of bamboo air seasoning and cracking. Drying Technology, 40(3), 1–10.
   Web of Science ®Google Scholar
• Yu, C. M., Dai, C. P. and Wang, B. J. (2007) Heat and mass transfer in wood composite panels during hot pressing: part 3. predicted variations and interactions of the pressing variables. Holzforschung, 35(1), 74–82.
   Google Scholar
• Yu, Y. L., Huang, X. A. and Yu, W. J. (2014) High performance of bamboo-based fiber composites from long bamboo fiber bundles and phenolic resins. Journal of Applied Polymer Science, 131(12), 40371.
   Web of Science ®Google Scholar
• Yu, Y. L., Liu, R., Huang, Y. X., Meng, F. D. and Yu, W. J. (2017) Preparation, physical, mechanical, and interfacial morphological properties of engineered bamboo scrimber. Construction and Building Materials, 157, 1032–1039.
   Web of Science ®Google Scholar
• Zhan, T. Y., Jiang, J. L. and Lu, J. X. (2015) The viscoelastic properties of Chinese Fir during water-loss process under hydrothermal conditions. Drying Technology, 33(14), 1739–1745.
   Web of Science ®Google Scholar
• Zhang, Y. H., Huang, Y. X., Ma, H. X., Yu, W. J. and Qi, Y. (2018) Effect of different pressing processes and density on dimensional stability and mechanical properties of bamboo fiber-based composites. Journal of the Korean Wood Science and Technology, 46(4), 355–361.
   Google Scholar
• Zhou, H. Y., Wei, X., Smith, L. M., Wang, G. and Chen, F. M. (2019) Evaluation of uniformity of bamboo bundle veneer and bamboo bundle laminated veneer lumber (BLVL). Forests, 10(10), 921.
   Web of Science ®Google Scholar
• Zou, L. H., Jin, H., Lu, W. Y. and Li, X. D. (2009) Nanoscale structural and mechanical characterization of the cell wall of bamboo fibers. Materials Science and Engineering, 29, 1375–1379.
   Google Scholar