Wood veneer strips as reinforcement for cement-bonded particleboards

References

• Barnes, D. (2001) A model of the effect of strand length and strand thickness on the strength properties of oriented wood composites. Forest Products Journal, 51(2), 36–46.
   Web of Science ®Google Scholar
• Beck, K., Cloutier, A., Salenikovich, A. and Beauregard, R. (2009) Effect of strand geometry and wood species on strandboard mechanical properties. Wood and Fiber Science, 267–278.
   Web of Science ®Google Scholar
• Brahmia, F. Z., Horvath, P. G. and Alpár, T. (2020) Effect of pre-treatments and additives on the improvement of cement wood composite: A review. BioResources, 15(3), 7288–7308.
   Web of Science ®Google Scholar
• Buchelt, B. and Pfriem, A. (2011) Influence of wood specimen thickness on its mechanical properties by tensile testing: Solid wood versus veneer. Holzforschung, 65(2), 249–252.
   Web of Science ®Google Scholar
• Buddenberg, J. (1988) Form strip or bar of wood-based material (EP0267315A1).
   Google Scholar
• Dube, H. and Scherfke, R. (2008) Investigation on the influence of selected parameters on the production of cement bonded particleboards with the hot-press process Part 3: Influence of pressing time, chip length and cement content. Holztechnologie, 49(5), 11–15.
   Google Scholar
• Eberhardsteiner, J. (2002) Mechanisches Verhalten von Fichtenholz, experimentelle Bestimmung der biaxialen Festigkeitseigenschaften (Vienna: Springer). 174 pages, http://dx.doi.org/10.1007/978-3-7091-6111-1 (in German).
   Google Scholar
• EN 1520 (2011) Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement.
   Google Scholar
• EN 206-1 (2021) Concrete – Specification, performance, production and conformity.
   Google Scholar
• EN 310 (1993) Wood-based panels; determination of modulus of elasticity in bending and of bending strength.
   Google Scholar
• EN 322 (1993) Wood-based panels; determination of moisture content.
   Google Scholar
• EN 323 (1993) Wood-based panels; determination of density.
   Google Scholar
• EN 634-2 (2007) Cement-bonded particleboards – Specifications – Part 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions.
   Google Scholar
• Fan, M. Z., Dinwoodie, J. M., Bonfield, P. W. and Breese, M. C. (1999) Dimensional instability of cement bonded particleboard: Behaviour of wood chips from various stages of manufacture of CBPB. Journal of Materials Science, 34, 1729–1740.
   Web of Science ®Google Scholar
• Frybort, S., Bliem, P., Möseler, B., Krenke, T., Mauritz, R. and Müller, U. (2020) Influence of disintegration technologies on particle structure and its mechanical properties. Wood Material Science & Engineering, 16(3), 1–7.
   Web of Science ®Google Scholar
• Frybort, S., Mauritz, R., Teischinger, A. and Müller, U. (2008) Cement bonded composites – A mechanical review. BioResources, 3(2), 602–626.
   Web of Science ®Google Scholar
• Frybort, S., Mauritz, R., Teischinger, A. and Müller, U. (2012) Investigation of the mechanical interactions at the interface of wood-cement composites by means of electronic speckle pattern interferometry. BioResources, 7(2), 2483–2495.
   Web of Science ®Google Scholar
• Govin, A., Peschard, A., Fredon, E. and Guyonnet, R. (2005) New insights into wood and cement interaction. Holzforschung, 59(3), 330–335.
   Web of Science ®Google Scholar
• Hankinson, R. L. (1921) Investigation of crushing strength of spruce at varying angles of grain. Air Service Information Circular, 3(259), 130, 16 pages.
   Google Scholar
• Heller, W. (1995) Spanplatten-Fibel. C.W. Niemeyer-Druck, 1st edition, Hameln/Germany, 366 pages (in German).
   Google Scholar
• Ishikura, Y., Abe, K. and Yano, H. (2010) Bending properties and cell wall structure of alkali-treated wood. Cellulose, 17(1), 47–55.
   Web of Science ®Google Scholar
• Jorge, F. C., Pereira, C. and Ferreira, J. M. F. (2004) Wood-cement composites: A review. Holz als Roh- und Werkstoff, 62(5), 370–377.
   Google Scholar
• Karade, S. R., Irle, M. and Maher, K. (2003) Assessment of wood-cement compatibility. A new approach. Holzforschung, 57(6), 672–680.
   Web of Science ®Google Scholar
• Keylwerth, R. (1951) Die anisotrope Elastizitat des Holzes und der Lagenholzer (Deutscher Ingenieur-Verlag), 40 pages (in German).
   Google Scholar
• Kobetičová, K. and Nábělková, J. (2021) Effect of wood hemicellulose composition on binding interactions with caffeine. Buildings, 11(11), 515.
   Web of Science ®Google Scholar
• Kühne, G. and Meier, W. (1990) Reasons and possibilities for the influence of chemical interactions in wood-fibre-cement and wood-fiber-plaster mixtures. Holz als Roh- und Werkstoff, 48(4), 153–158.
   Google Scholar
• Kühne, G. and Thiele, K. (1986) Behavior of various lignocellulosic fibers in cement-analogous damaging solution. Holztechnologie, 29(1), 5–7.
   Google Scholar
• Lee, A. W., Hong, Z., Phillips, D. R. and Hse, C. Y. (1987) Effect of cement/wood ratios and wood storage conditions on hydration temperature, hydration time, and compressive strength of wood-cement mixtures. Wood and Fiber Science, 19(3), 262–268.
   Web of Science ®Google Scholar
• Marzuki, A. R., Rahim, S., Hamidah, M. and Ruslan, R. A. (2011) Effects of wood: cement ratio on mechanical and physical properties of three-layered cement-bonded particleboards from Leucaena leucocephala. Journal of Tropical Forest Science, 23(1), 67–72.
   Web of Science ®Google Scholar
• Miller, D. P. and Moslemi, A. A. (1991) Wood-cement composites: Species and heartwood-sapwood effects on hydration and tensile strength. Forest Products Journal, 41(3), 9–14.
   Web of Science ®Google Scholar
• Moslemi, A. A. and Pfister, S. C. (1987) The influence of cement/wood ratio and cement type on bending strength and dimensional stability of wood-cement composite panels. Wood and Fiber Science, 19(2), 165–175.
   Web of Science ®Google Scholar
• Na, B., Wang, Z., Wang, H. and Lu, X. (2014) Wood-cement compatibility review. Wood Research, 59(5), 813–826.
   Web of Science ®Google Scholar
• Nazerian, M., Ghalehno, M. D. and Gozali, E. (2011) Effects of wood species, particle sizes and dimensions of residue obtained from trimming of wood–cement composites on physical and mechanical properties of cement-bonded particleboard. Wood Material Science & Engineering, 6(4), 196–206.
   Google Scholar
• Nazerian, M. and Sadeghiipanah, V. (2013) Cement-bonded particleboard with a mixture of wheat straw and poplar wood. Journal of Forestry Research, 24(2), 381–390.
   Web of Science ®Google Scholar
• Niemz, P. and Sonderegger, W. (2017) Wood Physics. Physics of Wood and Wood-Based Materials (Munich: Fachbuchverlag Leipzig im Carl Hanser Verlag).
   Google Scholar
• Pramreiter, M., Stadlmann, A., Huber, C., Konnerth, J., Halbauer, P., Baumann, G. and Müller, U. (2021) The influence of thickness on the tensile strength of Finnish Birch veneers under varying load angles. Forests, 12(1), 87.
   Web of Science ®Google Scholar
• Rackwitz, G. (1963) Der Einfluss der Spanabmessungen auf einige Eigenschaften von Holzspanplatten ("Influence of chip dimensions on some properties of wood particleboard"). Holz als Roh- und Werkstoff, 21, 200–209. http://dx.doi.org/10.1007/BF02609724 (in German).
   Google Scholar
• Rangavar, H. (2017) Wood-cement board reinforced with steel nets and woven hemp yarns. Physical and Mechanical Properties. Drvna ind, 68(2), 121–128.
   Web of Science ®Google Scholar
• Roffael, E. (1989) Abgabe von fluechtigen organischen Saeuren aus Holzspaenen und Holzspanplatten. Holz als Roh- und Werkstoff, 47, 447–452. http://dx.doi.org/10.1007/BF02640138
   Google Scholar
• Sandermann, W., Preusser, H.-J. and Schweers, W. (1960) Studies on mineral-bonded wood based panels. Holzforschung, 14(3), 70–77.
   Google Scholar
• Sauvat, N., Sell, R., Mougel, E. and Zoulalian, A. (1999) A study of ordinary Portland cement hydration with wood by isothermal calorimetry. Holzforschung, 53(1), 104–108.
   Web of Science ®Google Scholar
• Schubert, B., Wienhaus, O. and Bloßfeld, O. (1990) Investigations on the wood-cement composite influence of various wood species on the setting behaviour of wood-cement compounds and possibilities of modifying the composite. Holz als Roh- und Werkstoff, 48(11), 423–428.
   Google Scholar
• Schwarz, H.-G. and Simatupang, M. H. (1984) Suitability of beech wood for the production of cement-bonded wood panels. Holz als Roh- und Werkstoff, 42, 265–270.
   Google Scholar
• Simatupang, M. H. (1979) The water requirement in the production of cement-bonded particleboard. Holz als Roh- und Werkstoff, 37(10), 379–382.
   Google Scholar
• Simatupang, M. H. (1986) Degradation reactions of glucose, cellobiose and wood under the influence of Portland cement mortars. Holzforschung, 40(3), 149–155.
   Web of Science ®Google Scholar
• Thomas, J. J., Jennings, H. M. and Chen, J. J. (2009) Influence of nucleation seeding on the hydration mechanisms of tricalcium silicate and cement. Journal of Physical Chemistry C, 113(11), 4327–4334.
   Web of Science ®Google Scholar
• Wagenführ, R. and Wagenführ, A. (2021) Wood Atlas (Leipzig: Carl Hanser Verlag GmbH Co KG).
   Google Scholar
• Weatherwax, R. C. and Tarkow, H. (1964) Effect of wood on setting of Portland cement. Forest Products Journal, 14, 567–568.
   Google Scholar
• Wei, Y. M., Tomita, B., Hiramatsu, Y., Miyatake, A. and Fujii, T. (2002) Study of hydration behaviors of wood-cement mixtures: compatibility of cement mixed with wood fiber strand obtained by the water-vapor explosion process. Journal Wood Science, 48(5), 365–373.
   Web of Science ®Google Scholar
• Wolfe, R. and Gjinolli, A. (1997) Cement-bonded wood composites as an engineering material. In Use of Recycled Wood and Paper in Building Applications, edited by the USDA Forest Service, proceedings number 7286. pp. 84–91. ISBN 0-935018-88-3
   Google Scholar
• Xiong, G. (1996) Steel strip reinforced high-density wood shaving-cement board ribbed roof panel. Cement and Concrete Composites, 18(6), 429–436.
   Web of Science ®Google Scholar