An approach for computing the thermal balance and energy consumption of concrete pits during boiling of frozed logs for veneer production

References

• Chudinov, B.S., 1968. Teoria teplovoy obrabotki drevesiny [Theory of thermal treatment of wood]. Moscow: Nauka. 255 p. in Russian.
   Google Scholar
• Deliiski, N., 2003. Modelirane i tehnologii za proparvane na darveni materiali v avtoklavi [Modeling and technologies for steaming of wood materials in autoclaves]. Dissertation for DSc, Sofia: University of Forestry, 358 p. in Bulgarian.
   Google Scholar
• Deliiski, N., 2004. Modeling and automatic control of heat energy consumption required for thermal treatment of logs. Drvna Industrija, 55 (4), 181–199.
   Google Scholar
• Deliiski, N., 2009. Computation of the 2-dimensional transient temperature distribution and heat energy consumption of frozen and non-frozen logs. Wood Research, 54 (3), 67–78.
   Web of Science ®Google Scholar
• Deliiski, N., 2011. Transient heat conduction in capillary porous bodies. In: A. Ahsan, ed. Convection and conduction heat transfer. Rieka: InTech Publishing House, 149–176. doi:10.5772/21424.
   Google Scholar
• Deliiski, N., 2013a. Computation of the wood thermal conductivity during defrosting of the wood. Wood Research, 58 (4), 637–650.
   Web of Science ®Google Scholar
• Deliiski, N., 2013b. Modelling of the energy needed for heating of capillary porous bodies in frozen and non-frozen states. Saarbrücken: Lambert Academic Publishing, Scholars’ Press. 116 p. Available from: http://www.scholars-press.com//system/covergenerator/build/1060.
   Google Scholar
• Deliiski, N., et al., 2015. Computation of the temperature conductivity of frozen wood during its defrosting. Drvna Industrija, 66 (2), 87–96. doi:10.5552/drind.2015.1351.
   Web of Science ®Google Scholar
• Deliiski, N., et al., 2019. Computing the energy for warming up of prisms for veneer production during autoclave steaming with a limited power of the heat generator. Acta Facultatis Xilologiae Zvolen, 61 (1), 63–74. doi:10.17423/afx.2019.61.1.06.
   Web of Science ®Google Scholar
• Deliiski, N., et al., 2021a. A methodology for computing the relative icing degrees in logs stored in an open warehouse at ambient air temperature in winter. Wood Material Science & Engineering, 16 (6), 421–428. doi:10.1080/17480272.2021.1961312.
   Web of Science ®Google Scholar
• Deliiski, N., et al., 2021b. Influence of selected factors on the duration and energy efficiency of autoclave steaming regimes of non-frozen prisms for veneer production. Energies, 14 (21), article number 7433, 16 p. doi:10.3390/en14217433.
   Web of Science ®Google Scholar
• Deliiski, N., et al., 2022a. An approach for computing the specific heat capacities of logs stored for a long time in an open warehouse. Wood Material Science & Engineering, 17 (5), 376–385. doi:10.1080/17480272.2022.2043434.
   Web of Science ®Google Scholar
• Deliiski, N., et al., 2022b. Computing the duration of regimes for autoclave steaming of frozen wooden prisms under variable operating conditions in veneer production. Wood Material Science & Engineering, 17 (6), 451–458. doi:10.1080/17480272.2022.2123281.
   Web of Science ®Google Scholar
• Deliiski, N., et al., 2023. Mathematical description of the operating temperature in regimes for autoclave steaming and subsequent air conditioning of wood. Wood Material Science & Engineering, 11. doi:10.1080/17480272.2023.2240746.
   Web of Science ®Google Scholar
• Deliiski, N., and Dzurenda, L., 2010. Modelirovanie teplovyh processov v tehnologiyah obrabotki drevesiny [Modelling of the thermal processes in the technologies for wood processing]. Zvolen: Technical University in Zvolen. 224 p. in Russian.
   Google Scholar
• Deliiski, N., and Tumbarkova, N., 2019. Numerical solution to two-dimensional freezing and subsequent defrosting of logs. In: A. Iranzo, ed. Heat and mass transfer – advances in science and technology applications. London: IntechOpen. 20 p. doi:10.5772/intechopen.84706.
   Google Scholar
• Dzurenda, L., and Deliiski, N., 2010. Thermal processes in the woodworking technologies. Zvolen: Technical University in Zvolen. 268p. in Slovak.
   Google Scholar
• Dzurenda, L., and Deliiski, N., 2011. Mathematical model for calculation standard values for heat energy consumption during the plasticization process of wooden prisms by hot water in pits. Acta Facultatis Xilologie, 53 (2), 25–36. In Slovak.
   Google Scholar
• Hadjiski, M., Deliiski, N., and Angelski, D., 2021. Computing the processing medium temperature and heat fluxes in the beginning of regimes for autoclave steaming of frozen wood materials. In: International Conference Automatics and Informatics (ICAI), 30th September–3rd October 2021, Varna, Bulgaria, 6 p. doi:10.1109/icai52893.2021.9639467.
   Google Scholar
• Hnětkovský, V., 1983. Papírenská příručka [Papermaking handbook]. Prague: SNTL. 860 p. in Slovak.
   Google Scholar
• Kavalov, A., and Angelski, D., 2014. Tehnologia na mebelnoto proizvodstvo [Technology of furniture]. Sofia: University of Forestry. 390 p. in Bulgarian.
   Google Scholar
• Khattabi, A., and Steinhagen, H.P., 1992. Numerical solution to two-dimensional heating of logs. Holz als Roh- und Werkstoff, 50 (7–8), 308–312. doi:10.1007/BF02615359.
   Google Scholar
• Khattabi, A., and Steinhagen, H.P., 1993. Analysis of transient non-linear heat conduction in wood using finite-difference solutions. Holz als Roh- und Werkstoff, 51 (4), 272–278. doi:10.1007/BF02629373.
   Google Scholar
• Klement, I., and Detvaj, J., 2007. Technology of primary wood management. Zvolen: Technical University in Zvolen. 325 p. in Slovak.
   Google Scholar
• Kollmann, F.F., and Côté, W.A., Jr., 1984. Principles of wood science and technology. I. Solid wood. New York: Springer-Verlag. 592 p.
   Google Scholar
• Lawniczak, M., 1995. Hydrothermal and plasticizing treatment of wood. Part I. Boiling and steaming of wood. Poznan: Agricultural Academy. 149 p. in Polish.
   Google Scholar
• Mahút, J., Réh, R., and Víglaský, J., 1998. Composite wood materials, part I. Veneers and laminated products. Zvolen: Technical University in Zvolen. 266 p. in Slovak.
   Google Scholar
• Mörath, E., 1949. Das Dämpfen und Kochen in der Furnier– und Sperrholzindustrie. Holztechnik, 29 (7), 129.
   Google Scholar
• Niemz, P., and Sonderegger, W., 2017. Holzphysik: Physik des Holzes und der Holzwerkstoffe. Munich: Carl Hanser Verlag GmbH & Company KG. 580 p.
   Google Scholar
• Niemz, P., Teischinger, A., and Sandberg, D., eds., 2023. Springer handbook for wood science and technology. Cham: Springer Nature Switzerland AG. 2069 p.
   Google Scholar
• Pervan, S., 2009. Technology for treatment of wood with water steam. Zagreb: University in Zagreb. in Croatian.
   Google Scholar
• Požgaj, A., et al., 1997. Štruktúra a vlastnosti dreva [Structure and properties of wood] (2nd ed.). Bratislava: Priroda a.s. 485 p. in Slovak.
   Google Scholar
• Regináč, L., et al., 1990. Náuka o dreve II [Wood science II]. Zvolen: Technical University in Zvolen. 424 p. in Slovak.
   Google Scholar
• Setnička, F., 1970. Designing of thermal and technical equipment of woodworking plants. Zvolen: Technical University in Zvolen. 313 p. in Slovak.
   Google Scholar
• Shubin, G.S., 1990. Sushka i teplovaya obrabotka drevesiny [Drying and thermal treatment of wood]. Moscow: Lesnaya Promyshlennost. 337 p. in Russian.
   Google Scholar
• Sohor, M., and Kadlec, P., 1990. Hydrothermal treatment of wood for production of veneer. Drevo, № 2.
   Google Scholar
• Stamm, A.J., 1964. Wood and cellulose science. New York: Ronald Press Company.
   Google Scholar
• Steinhagen, H.P., 1986. Computerized finite-difference method to calculate transient heat conduction with thawing. Wood Fiber Science, 18 (3), 460–467.
   Web of Science ®Google Scholar
• Steinhagen, H.P., 1991. Heat transfer computation for a long, frozen log heated in agitated aater or steam – a practical recipe. Holz als Roh- und Werkstoff, 49 (7–8), 287–290. doi:10.1007/BF02663790.
   Google Scholar
• Steinhagen, H.P., 2005. Veneer block conditioning manual for veneer and plywood production. Maderas. Ciencia y Tecnología, 7 (1), 49–56.
   Google Scholar
• Steinhagen, H.P., and Lee, H.W., 1988. Enthalpy method to compute radial heating and thawing of logs. Wood Fiber Science, 20 (4), 415–421.
   Web of Science ®Google Scholar
• Telegin, A.S., Shvidkiy, V.S., and Yaroshenko, Y.G., 2002. Teplomassoperenos [Heat and mass transfer]. Moskow: Akademkniga. 455 p. in Russian.
   Google Scholar
• Trebula, P., and Klement, I., 2002. Drying and hydrothermal treatment of wood. Zvolen: Technical University in Zvolen. 449 p. in Slovak.
   Google Scholar
• Tumbarkova, N., 2019. Modelirane na procesite na zamrazvane i razmrazyavane na obli darveni materiali i na energokonsumaciata im [Modelling of the freezing and defrosting processes of logs and their energy consumption]. Thesis (PhD). Sofia: University of Forestry, 198 p. in Bulgarian.
   Google Scholar
• Videlov, C., 2003. Sushene i toplinno obrabotvane na darvesinata [Drying and thermal treatment of wood]. Sofia: University of Forestry. 335 p. in Bulgarian.
   Google Scholar
• Vorreiter, L., 1958. Holztechnologisches Handbuch, Band II. Wien–München: Verlag Georg Fromme & Co. 656 p.
   Google Scholar