Effect of the drag-finishing of cutting blades made of sintered carbides on tool life in particleboard machining

References

• Czarniak, P., et al., 2022. Initial study of the effect of some PVD coatings (“TiN/AlTiN” and “TiAlN/a-C:N”) on the wear resistance of wood drilling tools. Forests, 13, 286. https://doi.org/10.3390/f13020286.
   Web of Science ®Google Scholar
• Czarniak, P., et al., 2023a. Micro geometry analysis of WC-Co carbide blades modified with PVD coating subjected to blunting during milling in chipboard. Wood Material Science & Engineering. doi:10.1080/17480272.2023.2251026.
   Web of Science ®Google Scholar
• Czarniak, P., et al., 2023b. Influence of WC-Co knifes pre-treatment with drag finishing method subjected to tool coatings deposition on blunting process. Wood Material Science & Engineering, doi:10.1080/17480272.2023.2248471.
   Web of Science ®Google Scholar
• Darmawan, W., et al., 2010. Wear characteristics of multilayer coated cutting tools in milling particleboard. Forest Products Journal, 60, 615–621.
   Web of Science ®Google Scholar
• Denkena, B., Krödel, A., and Hein, M., 2019. Innovative method for cutting edge preparation with flexible diamond tools. Procedia CIRP, 86, 121–125, the 7th CIRP Global Web Conference. doi:10.1016/j.procir.2020.01.010.
   Google Scholar
• EN 312:2010 Particleboards – Specifications. European Committee for Standardization, Brussels, Belgium.
   Google Scholar
• Górski, J., Podziewski, P., and Borysiuk, P., 2022. The machinability of flat-pressed, single-layer wood-plastic particleboards while drilling—experimental study of the impact of the type of plastic used. Forests, 13, 584. https://doi.org/10.3390/f13040584.
   Web of Science ®Google Scholar
• ISO 3685:1993 Tool-life testing with single-point turning tools. International Organization for Standardization, Vernier, Geneva, Switzerland.
   Google Scholar
• Jegorowa, A., et al., 2022. The Use of multilayer perceptron (MLP) to reduce delamination during drilling into melamine faced chipboard. Forests, 13, 933. https://doi.org/10.3390/f13060933.
   Web of Science ®Google Scholar
• Kowaluk, G., et al., 2007. Some aspects of machining of particleboards produced from alternative lignocellulose raw materials. In: Proceedings of the 2nd international scientific conference woodworking technique, 11–15 September, Zalesina, Croatia, 277–282.
   Google Scholar
• Lemaster, R.L., Lu, L., and Jackson, S., 2000. The use of process monitoring techniques on a CNC wood router. Part 2. Use of vibration accelerometer to monitor tool wear and workpiece quality. Forest Products Journal, 50, 59–64.
   Web of Science ®Google Scholar
• Peterka, J., et al., 2022. Analysis of form error and roughness of hardened steel workpieces internally turned with different tools in long overhangs. Research Papers Faculty of Materials Science and Technology Slovak University of Technology in Bratislava, 30(50). https://doi.org/10.2478/rput-2022-0003
   Google Scholar
• Podziewski, P., et al., 2017. Relative machinability of wood-based boards in the case of drilling – experimental study. Bioresources, 13, 1761–1772. https://doi.org/10.15376/biores.13.1.1761-1772.
   Web of Science ®Google Scholar
• Podziewski, P., Śmietańska, K., and Górski, J., 2021. Experimental verification of a highly simplified, preliminary machinability test for wood-based boards in the case of drilling. Forests, 12, 1334. https://doi.org/10.3390/f12101334
   Web of Science ®Google Scholar
• Rech, J., 2006. Influence of cutting edge preparation on the wear resistance in high speed dry gear hobbing. Wear, 261, 505–512.
   Web of Science ®Google Scholar
• Rech, J., et al., 2005. Influence of cutting edge radius on the wear resistance of PM-HSS milling inserts. Wear, 259, 1168–1176.
   Web of Science ®Google Scholar
• Rodriguez, C.J.C., 2009. Cutting edge preparation of precision cutting tools by applying micro-abrasive jet machining and brushing. Doctoral dissertation. Kassel University Press GmbH, ISBN online: 978-3-89958-713-5.
   Google Scholar
• Rogozinski, T., et al., 2017. Fine particles content in dust created in CNC milling of selected wood composites. Wood and Fiber Science, 49, 461–469.
   Web of Science ®Google Scholar
• Śmietańska, K., et al., 2020. Automated monitoring of delamination factor during up (conventional) and down (climb) milling of melamine-faced MDF using image processing methods. European Journal of Wood and Wood Products (HOLZ ALS ROH-UND WERKSTOFF), 78, 613–615. https://doi.org/10.1007/s00107-020-01518-9
   Web of Science ®Google Scholar
• Szwajka, K., and Trzepieciński, T., 2016. Effect of tool material on tool wear and delamination during machining of particleboard. Journal of Wood Science, 62, 305–315. https://doi.org/10.1007/s10086-016-1555-6
   Web of Science ®Google Scholar
• Szwajka, K., and Trzepieciński, T., 2017. An examination of the tool life and surface quality during drilling melamine faced chipboard. Wood Research, 62, 307–318.
   Web of Science ®Google Scholar