Effects of alkyl-ketene dimer on physical, mechanical and formaldehyde emission properties of particleboard produced with melamine-impregnated paper waste

References

• Akbulut, T., 1999. “Effect of Mat Moisture and F/U Mole Ratio on Formaldehyde Emission and Some Technological Properties of Particleboard,” Journal of Istanbul University Faculty of Forestry, s.23–28.
   Google Scholar
• Alpár, T. and Winkler, A., 2006. Recycling of impregnated décor paper in particleboard. Acta Silvatica et Lignaria Hungarica, 2 (January 2006), 113–116.
   Google Scholar
• Amthor, J. and Böttcher, P., 1984. The influence of hydrophobing on the surface characteristics of particleboard under sort term water exposure. Holz als roh-und Werkstoff, 42, 379–383.
   Google Scholar
• Ayrilmis, N., 2012. Enhancement of dimensional stability and mechanical properties of light MDF by adding melamine resin impregnated paper waste. International Journal of Adhesion and Adhesives, Elsevier, 33, 45–49. doi:10.1016/j.ijadhadh.2011.11.001.
   Web of Science ®Google Scholar
• Baharoǧlu, M., et al., 2014. Effect of paraffin application technique on the physical and mechanical properties of particleboard. Science and Engineering of Composite Materials, 21 (2), 191–195. doi:10.1515/secm-2013-0074.
   Web of Science ®Google Scholar
• Barbu, M.C. and Steinwender, M., 2009. The state of the art for the environmental protection in the European wood based panels industry. Pro Ligno, 5 (2), 85–96.
   Google Scholar
• Başboğa, İ.H., et al., 2018. Effectiveness of Melamine Impregnated Paper (MIP) waste as an adhesive in particleboard manufacturing. Kastamonu University Journal of Forestry Faculty, 18 (3), 292–303. doi:10.17475/kastorman.498896.
   Google Scholar
• Başboğa, İ.H., 2018. Utilization of Melamine Impregnated Paper Waste (MIP) in particleboard manufacturing. Kahramanmaraş: Kahramanmaraş Sütçü İmam University.
   Google Scholar
• Bozkurt, F., Avci, B., and Mengeloğlu, F., 2021. Utilization of melamine impregnated paper waste as a filler in thermoplastic composites. BioResources, 16 (2), 3159–3170. doi:10.15376/biores.16.2.3159-3170.
   Web of Science ®Google Scholar
• Bozkurt, Y. and Göker, Y., 1985. Textbook of particleboard industry. İstanbul, Türkiye: Istanbul University Press.
   Google Scholar
• Çavdar, A.D., et al., 2013. Effect of waste melamine impregnated paper on properties of oriented strand board. Materials and Design, 51 (October 2019), 751–755. doi:10.1016/j.matdes.2013.04.052.
   Google Scholar
• Caylak, S., et al., 2021. Mechanical characteristics and hydrophobicity of alkyl ketene dimer compatibilized hybrid biopolymer composites. Polymer Composites, 42 (5), 2324–2333. doi:10.1002/pc.25980.
   Web of Science ®Google Scholar
• CEN, 1999a. TS EN 323 wood- based panels- Determination of density. Brussels, Belgium: European Committee for Standardization (CEN).
   Google Scholar
• CEN, 1999b. TS EN 310 wood- based panels- Determination of modulus of elasticity in bending and of bending strength. Brussels, Belgium: European Committee for Standardization (CEN).
   Google Scholar
• CEN, 1999c. TS EN 317 particleboards and fibreboards- Determination of swelling in thickness after immersion in water. Brussels, Belgium: European Committee for Standardization (CEN).
   Google Scholar
• CEN, 1999d. TS EN 319 particleboards and fibreboards- Determination of tensile strength perpendicular to the plane of the board. Brussels, Belgium: European Committee for Standardization (CEN).
   Google Scholar
• CEN, 2005. TS EN 311 wood-based panels - Surface soundness - Test method. Brussels, Belgium: European Committee for Standardization (CEN).
   Google Scholar
• CEN, 2011. TS EN 320 particleboards and fibreboards - Determination of resistance to axial withdrawal of screws. Brussels, Belgium: European Committee for Standardization (CEN).
   Google Scholar
• CEN, 2016. TS EN ISO 12460-5 wood-based panels - Determination of formaldehyde release - Part 5: extraction method (called the perforator method. Brussels, Belgium: European Committee for Standardization (CEN).
   Google Scholar
• Demirel, G.K., et al., 2018. Effect of alkyl ketene dimer on the physical, mechanical, and biological durability of plywood. BioResources, 13 (1), 147–156. doi:10.15376/biores.13.1.147-156.
   Web of Science ®Google Scholar
• Güler, C., Karademir, A., and Işık, H., 2015. Alkyl ketene dimer using as hydrophobic material in the production of particleboard. Selçuk-Technical Journal (Special issue (UMK-2015)), 163–170.
   Google Scholar
• Hata, T., 1993. Heat flow in particleboard mat and properties of particleboard under steam-injection pressing. Kyoto-shi: Kyoto University.
   Google Scholar
• Heebink, B.G., 1967. Proceedings of the W.S.U. particleboard symposium. Pullman: Washington.
   Google Scholar
• Hundhausen, U., Militz, H., and Mai, C., 2009. Die Verwendung von Alkylketendimer (AKD) zur oberflächenmodifizierung von Spänen für die Herstellung von Spanplatten. European Journal of Wood and Wood Products, 67 (1), 37–45. doi:10.1007/s00107-008-0275-z.
   Google Scholar
• I’Anson, S.J., Karademir, A., and Sampson, W.W., 2006. Specific contact area and the tensile strength of paper. APPITA Journal, 59 (4), 297–301. 20.
   Web of Science ®Google Scholar
• Irle, M. and Barbu, M.C., 2010. Wood-Based panel technology. In: H. Thoemen, M. Irle, and M. Sernek, eds. Wood-Based panels; An introduction for specialists (Cost action book). Nantes, France: Brunel University Press, 1–94.
   Google Scholar
• Kandelbauer, A. and Teischinger, A., 2010. Dynamic mechanical properties of decorative papers impregnatedàwith melamine formaldehyde resin. European Journal of Wood and Wood Products, 68 (2), 179–187. doi:10.1007/s00107-009-0356-7.
   Web of Science ®Google Scholar
• Karademir, A., et al., 2004. A study of the effects of alkyl ketene dimer and ketone on paper sizing and friction properties. APPITA Journal, 57 (2), 116–119.
   Web of Science ®Google Scholar
• Karademir, A., et al., 2005. Influence of fillers on sizing efficiency and hydrolysis of alkyl ketene dimer. Canadian Journal of Chemical Engineering, doi:10.1002/cjce.5450830328.
   Web of Science ®Google Scholar
• Kohlmayr, M., et al., 2014. Drying and curing behaviour of melamine formaldehyde resin impregnated papers. Journal of Applied Polymer Science, 131 (3), 1–9. doi:10.1002/app.39860.
   Web of Science ®Google Scholar
• Kollman, F., Kuenzi, E.W., and Stam, A.S., 1975. Principles of wood science and technology II. Wood based materials. Heidelberg: Springer Berlin. doi:10.1007/978-3-642-87931-9.
   Google Scholar
• Korpela, A., Jaiswal, A.K., and Asikainen, J., 2021. Effects of hydrophobic sizing on paper Dry and WetStrength properties: a comparative study between AKD sizing of NBSK handsheets and rosin sizing of CTMP handsheets. BioResources, 16 (3), 5350–5360.
   Web of Science ®Google Scholar
• Kutluata, N.Ö., Olgun, Ç, and Gür, M., 2023. A laboratory trial on the usability of waste impregnated papers in standard quality high density fiberboard (HDF) production. Bartın Orman Fakültesi Dergisi, 25 (3), 369–377. doi:10.24011/barofd.1250747.
   Google Scholar
• Le Fur, X., et al., 2004. Recycling melamine-impregnated paper waste as board adhesives. Holz als Roh - und Werkstoff, 62 (6), 419–423. doi:10.1007/s00107-004-0519-5.
   Google Scholar
• Lynam, F.C., 1969. Factors influencing the properties of wood chipboard. In: L. Mitlin, ed. Particleboard manufacture and applications. UK: Pressmedia Books Ltd., 145–149.
   Google Scholar
• Maloney, T.M., 1993. Modern particleboard & Dry-process fibreboard manufacturing. San Francisco, US: Miller Freeman Publications.
   Google Scholar
• Nemli, G., Demirel, S., and Zekoviç, E., 2006. The influences of moisture content of the particle, paraffin usage and wood species on the some technological properties of particleboard. Kafkas University, Artvin Faculty of Forestry Journal, 7 (2), 81–93.
   Google Scholar
• Nemli, G., Yildiz, S., and Gezer, E.D., 2005. Effects of melamine raw paper weight, varnish type and the structure of continuous pressed laminate (CPL) on the physical, mechanical properties and decay resistance of particleboard. International Biodeterioration and Biodegradation, 56 (3), 166–172. doi:10.1016/j.ibiod.2005.07.002.
   Web of Science ®Google Scholar
• Roffaele, E., 1982. Formaldehydabgabe von spanplatten und anderen werkstoffen. Stuttgart.: DRW Verlag.
   Google Scholar
• Sala, C.M. and Kowaluk, G., 2020. An impact of surface spray and pressing temperature on the properties of high density fibreboards. Annals of WULS, Forestry and Wood Technology, 112 (112), 36–53. doi:10.5604/01.3001.0014.7355.
   Google Scholar
• Sani, R.F. and Enayati, A.A., 2020. Reduced use of urea-formaldehyde resin and press time due to the use of melamine resin-impregnated paper waste in MDF. Journal of the Indian Academy of Wood Science, Springer India, 17 (1), 100–105. doi:10.1007/s13196-020-00261-1.
   Web of Science ®Google Scholar
• Silva, A.P.L.D., et al., 2012. Addition of impregnated paper residue to produce MDP wood panel: example of solid waste recycling. International Journal of Materials Engineering, 2 (6), 75–79. doi:10.5923/j.ijme.20120206.01.
   Google Scholar
• Song, X., Chen, F., and Liu, F., 2012. Preparation and characterization of alkyl ketene dimer (AKD) modified cellulose composite membrane. Carbohydrate Polymers, Elsevier Ltd., 88 (2), 417–421. doi:10.1016/j.carbpol.2011.10.062.
   Web of Science ®Google Scholar
• Suchsland, O., 1967. Behavior of particleboard mat during the press cycle. Forest Products Journal, 17 (2), 51–57.
   Google Scholar
• Varlıbaş Başboğa, H., 2021. Investigations on obtaining of nonflammable and hydrophobic paper coating formulation. Bursa: Bursa Technical University.
   Google Scholar
• Varshoei, A., et al., 2013. The performance of Alkylketene Dimer (AKD) for the internal sizing of recycled OCC pulp. Lignocellulose, 2 (1), 316–326.
   Google Scholar
• Zhang, H., 2014. Effect of a novel coupling agent, alkyl ketene dimer, on the mechanical properties of wood-plastic composites. Materials and Design, Elsevier Ltd, 59, 130–134. doi:10.1016/j.matdes.2014.02.048.
   Web of Science ®Google Scholar
• Zhang, W., et al., 2018. A novel surface treatment for bamboo flour and its effect on the dimensional stability and mechanical properties of high density polyethylene/bamboo flour composites. Construction and Building Materials, Elsevier Ltd, 186, 1220–1227. doi:10.1016/j.conbuildmat.2018.08.003.
   Web of Science ®Google Scholar
• Zhang, Y., et al., 2023. Activated carbon from melamine-impregnated paper. BioResources, 18 (1), 1128–1140. doi:10.15376/biores.18.1.1128-1140.
   Web of Science ®Google Scholar
• Zhuo, Z., et al., 2024. Study on nitrogen migration during Co-pyrolysis of melamine-impregnated paper waste and Camellia Oleifera Shell. Sustainability (Switzerland), 16 (3), doi:10.3390/su16031197.
   Google Scholar