References
- E. Yilmaz, A. Kesimal, H. Deveci, B. Ercikdi, The factors affecting the performance of paste backfill: physical, chemical and mineralogical characterization, First Engineering Sciences Congress for Young Researcher (MBGAK’03), Istanbul, 2003.
- L. Huynh, D.A. Beattie, D. Fornasiero, and J. Ralston, Effect of polyphosphate and naphthalene sulfate formaldehyde condensate on the rheological properties of dewatered tailings and cemented paste backfill, Miner. Eng. 19 (2006), pp. 28–36.
- M. Fall, O. Nasir, J.C. Celestin, Paste backfill responses in deep mine temperature conditions. In 9th International Symposium of Mining with Backfill, Montreal, Canada, 2007.
- O. Nasir and M. Fall, Modeling the heat development in hydrating CPB structures, Comput. Geotechnics 36 (2009), pp. 1207–1218.
- J.S. Mahlaba, E.P. Kearsley, and R.A. Kruger, Effect of fly ash characteristics on the behaviour of pastes prepared under varied brine conditions, Miner. Eng. 24 (2011), pp. 923–929.
- L.M. Amaratunga and D.N. Yaschyshyn, Development of a high modulus paste fill using fine gold mill tailings, Geotech. Geol. Eng. 15 (1997), pp. 205–219.
- J.F. Archibald, F. Hassani, J. Nantel, D.O. DeGagné DO. Mine backfill: an operator’ guide. An interactive CD-ROM for mine operators and engineers, 2000.
- R.M. Rankine, K.J. Rankine, N. Sivakugan, W. Karunasena, M.L. Bloss. Geotechnical characterisation and stability analysis of BHP Cannington paste, ll. Proc. of the 15th Intern. Conf. on Soil Mechanics and, Geotechnical Engineering, 2001, pp. 1241–1244.
- K.A. Klein and D. Simon, Effect of specimen composition on the strength development in cemented paste backfill, Can. Geotech. J. 43 (2006), pp. 310–324.
- Fall M., Nasir O. Modeling of the coupled thermo-chemo-mechanical processes in cemented paste backfill structures and application to the prediction of their performance. International conference of mining with backfill, MineFill 2011, Cap Town, South Africa, 2010, pp. 389–395.
- M. Fall and S.S. Samb, Pore structure of cemented tailings materials under natural or accidental thermal loads, Mater. Charact. 59 (2007), pp. 598–605.
- S. Huang, K. Xia, and L. Qiao, Dynamic tests of cemented paste backfill: effects of strain rate, curing time, and cement content on compressive strength, J. Mater. Sci. 46 (2011), pp. 5165–5170.
- A. Kesimal, B. Ercikdi, and E. Yilmaz, The effect of desliming by sedimentation on paste backfill performance, Miner. Eng. 16 (2003), pp. 1009–1011.
- E. Yilmaz, A. Kesimal, B. Ercidi, Strength development of paste backfill simples at long term using different binders. In Proceedings of 8th symposium MineFill04, China, 2004, pp. 281–285.
- M. Fall and M. Benzaazoua, Modeling the effect of sulphate on strength development of paste backfill and binder mixture optimization, Cem. Concr. Res. 35 (2005), pp. 301–314.
- M. Fall and S.S. Samb, Effect of high temperature on strength and microstructural properties of cemented paste backfill, Fire Saf. J. 44 (2009), pp. 642–651.
- L. Orejarena and M. Fall, Mechanical response of a mine composite material to extreme heat, Bull. Eng. Geol. Environ. 67 (2008), pp. 387–396.
- O. Nasir and M. Fall, Shear behavior of cemented pastefill-rock interfaces, Eng. Geol. 101 (2008), pp. 146–153.
- F. Cihangir, B. Ercikdi, A. Kesimal, A. Turan, and H. Deveci, Utilisation of alkali-activated blast furnace slag in paste backfill of high-sulphide mill tailings: Effect of binder type and dosage, Miner. Eng. 30 (2012), pp. 33–43.
- M. Fall, M. Benzaazoua, and S. Ouellet, Experimental characterization of the influence of tailings fineness and density on the quality of cemented paste backfill, Miner. Eng. 18 (2005), pp. 41–44.
- O. Nasir and M. Fall, Coupling binder hydration, temperature and compressive strength development of underground cemented paste backfill at early ages, Tunn. Undergr. Space Technol. 25 (2010), pp. 9–20.
- T.J. Williams, D.K. Denton, M.K. Larson, R.L. Rains, J.B. Seymour, and D.R. Tesarik, Geomechanics of Reinforced Cemented Backfill in an Underhand Stope at the Lucky Friday Mine, US Department of Health and Human Services, Mullan, ID, 2001.
- N. Abdul-Hussian and M. Fall, Unsaturated hydraulic properties of cemented tailings backfill that contains sodium silicate, Eng. Geol. 123 (2011), pp. 288–301.
- A. Ghirian, M. Fall, J.P. Tchantchou, Coupled thermo-hydro-mechanical-chemical evolution of cemented paste backfill in column experiments, 14th Pan-American Conference on Soil Mechanics and Geotechnical Engineering (PCSMGE), the 64th Canadian Geotechnical Conference (CGC), 2011, pp. 2–6.
- M. Fall, D. Adrien, J.C. Celestin, M. Pokharel, and M. Toure, Saturated hydraulic conductivity of cemented paste backfill, Miner. Eng. 22 (2009), pp. 1307–1317.
- J.C. Celestin and M. Fall, Thermal conductivity of cemented paste backfill materials and factors affecting it, Min. Reclam. Environ. 23 (2008), pp. 1–17.
- A.B. Comsol, COMSOL Multiphysics User’s Guide, 2005.COMSOL, Inc., Burlington, MA, USA.
- A.K. Schindler, K.J. Folliard, Influence of supplementary cementing materials on the heat of hydration of concrete. In 9th Conference on Advances in Cement and Concrete, Colorado, 2003.
- A.K. Schindler, Effect of temperature on the hydration of cementitious materials, ACI Mater. J. 101 (2004), pp. 72–81.
- A.K. Schindler and K.J. Folliard, Heat of hydration models for cementitious materials, ACI Mater. J. 102 (2005), pp. 24–33.
- R.H. Mills, Factors influencing cessation of hydration in water cured cement pastes, Highway Res. Board Spec. Rep. 90 (1966), pp. 406–424.
- K.O. Kjellsen, R.J. Detwiler, and O.E. Gjørv, Development of microstructure in plain cement pastes hydrated at different temperatures, Cem. Concr. Res. 21 (1991), pp. 179–189.
- M. Mainguy, O. Coussy, and V. Baroghel-Bouny, Role of air pressure in drying of weakly permeable materials, J. Eng. Mech. 127 (2001), pp. 582–592.
- S. Poyet, S. Charlesa, N. Honoré, and V. L’hostisa, Assessment of the unsaturated water transport properties of an old concrete: Determination of the pore-interaction factor, Cem. Concr. Res. 41 (2011), pp. 1015–1023.
- L.A. Richards, Capillary conduction of liquids through porous mediums, Physics 1 (1931), pp. 318–333.
- S.C. Taylor, W.D. Hoff, M.A. Wilson, and K.M. Green, Anomalous water transport properties of Portland and blended cement-based materials, J. Mater. Sci. Lett. 18 (1999), pp. 1925–1927.
- M. Krus, K.K. Hansen, and H.M. Kiinzel, Porosity and liquid absorption of cement paste, Mater. Struct. 30 (1997), pp. 394–398.
- M.T.H. van Genuchten, A closed-form equation for predicting the hydraulic conductivity of unsaturated soils, Soil Sci. Soc. Am. J. 44 (1980), pp. 892–898.
- B.M. Savage and D.J. Janssen, Soil physics principles validated for use in predicting unsaturated moisture movement in Portland cement concrete, ACI Mater. J. 94 (1997), pp. 63–70.
- G. Meschke and S. Grasberger, Numerical modeling of coupled hygromechanical degradation of cementitious materials, J. Eng. Mech. 129 (2003), pp. 383–392.
- N. Abdul-Hussian and M. Fall, Thermo-hydro-mechanical behaviour of sodium silicate-cemented paste tailings in column experiments, Tunn. Undergr. Space Technol. 29 (2012), pp. 85–93.
- H.R. Thomas and M.R. Sansom, Fully coupled analysis of heat, moisture and air transfer in unsaturated soil, J. Eng. Mech. 121 (1995), pp. 392–405.
- A. Alnajim, Modélisation et simulation du comportement du béton sous hautes températures par une approche thermo-hygro-mécanique couplée. Application à des situations accidentelles, Ph.D. thesis, Université Marne La Vallée, 2004.
- B. Bary and A. Sellier, Coupled moisture-carbon dioxide-calcium transfer model for carbonation of concrete, Cem. Concr. Res. 34 (2004), pp. 1859–1872.
- P. Baggio, C. Bonacina, and B.A. Schrefler, Some consideration on modelling heat and mass transfer in porous media, Transp. Porous Media 28 (1997), pp. 233–251.
- F. Tong, L. Jing, and R.W. Zimmerman, A fully coupled thermo-hydro-mechanical model for simulating multiphase flow, deformation and heat transfer in buffer material and rock masses, Int. J. Rock Mech. Min. Sci. 47 (2010), pp. 205–217.
- L. Luckner, M.T.H. van Genuchyen, and D.R. Nielsen, A consistent set of parametric models for the two-phase flow of immiscible fluids in the subsurface, Water Resour. Res. 25 (1989), pp. 2187–2193.
- Y. Mualem, A new model for predicting the hydraulic conductivity of unsaturated porous media, Water Resour. Res. 12 (1976), pp. 513–522.
- L. D’Aloia and G. Chanvillard, Determining the “apparent” activation energy of concrete: Ea-numerical simulations of the heat of hydration of cement, Cem. Concr. Res. 32 (2002), pp. 1277–1289.
- P.F. Hansen and E.J. Pedersen, Maturity computer for controlled curing and hardening of concrete, Nordisk Betong 1 (1977), pp. 21–25.
- J.K. Kim, S.H. Han, and K.M. Lee, Estimation of compressive strength by a new apparent activation energy function, Cem. Concr. Res. 31 (2001), pp. 217–225.
- K. Maekawa, R. Chaube, T. Kishi, Modeling of Concrete Performance: Hydration. Microstructure Formation and Mass Transport, E&FN SPON, London, 1999.
- K. Maekawa and T. Ishida, Modeling of structural performances under coupled environmental and weather actions, Mater. Struct. 35 (2002), pp. 591–602.
- C.Y. Wang and C. Beckermann, A two-phase mixture model of liquid-gas flow and heat transfer in capillary porous media-I. Formulation, Heat Mass Transfer. 36 (1993), pp. 2747–2758.
- W.H. Somerton, J.A. Keese, and S.L. Chu, Thermal behaviour of unconsolidated oil sands, Soc. Pet. Eng. 14 (1974), pp. 513–521.
- P. Morabito, Measurement of thermal properties of different concretes, High Temp. High Pressures 21 (1989), pp. 51–59.
- K.H. Kim, S.E. Jeon, J.K. Kim, and S. Yang, An experimental study on thermal conductivity of concrete, Cem. Concr. Res. 33 (2003), pp. 363–371.
- N. Sivakugan, K.J. Rankine, and K.S. Rankin, Geotechnical consideration in mine backfilling in Australia, J. Cleaner Prod. 14 (2005), pp. 1168–1175.
- M. Fall, J.C. Celestin, M. Pokharel, and M. Touré, A contribution to understanding the effects of curing temperature on the mechanical properties of mine cemented tailings backfill, Eng. Geol. 114 (2010), pp. 397–413.
- T. Belem, O. El Aatar, B. Bussière, M. Benzaazoua, M. Fall, and E. Yilmaz, Characterization of self-weight consolidated paste backfill, in Proceedings of the 9th International Seminar on Paste and Thickened Tailings, R. Jewell, S. Lawson, and P. Newman, eds., ACG, Limerick, 2006, pp. 333–345.