Numerical evaluation of the bearing capacity factor N’_c of circular and ring footings

References

• Benmebarek, S., et al., 2012. Numerical evaluation of the bearing capacity factor Nγ′ of ring footings. Elsevier, Computers and Geotechnics, 44 (2012), 132–138. doi:10.1016/j.compgeo.2012.04.004
   Web of Science ®Google Scholar
• Bolton, M.D. and Lau, C.K., 1993. Vertical bearing capacity factors for circular and strip footings on Mohr-Coulomb soil. Canadian Geotechnical Journal, 30, 1024–1033. doi:10.1139/t93-099
   Web of Science ®Google Scholar
• Boushehrian, J.H. and Hataf, N., 2003. Experimental and numerical investigation of the bearing capacity of model circular and ring footings on reinforced sand. Geotextiles and Geomembranes, 21 (4), 241–256. doi:10.1016/S0266-1144(03)00029-3
   Web of Science ®Google Scholar
• Bowles, J.E., 1997. Foundation analysis and design. New York, NY: McGraw-Hill.
   Google Scholar
• Caquot, A. and Kérisel, J., 1953. Sur le terme de surface dans le calcul des fondations en milieu pulvérulent. Proceedings of the third International Conference on Soil Mechanics and Foundation, Engineering. Zurich, 1, 336–337.
   Google Scholar
• Cassidy, M.J. and Houlsby, G.T., 2002. Vertical bearing capacity factors for conical footings on sand. Géotechnique, 52 (9), 687–692. doi:10.1680/geot.2002.52.9.687
   Web of Science ®Google Scholar
• Choobbasti, A.J., et al., 2010. Numerical evaluation of bearing capacity and settlement of ring footing, case study of Kazeroon cooling towers. International Journal of Research and Revies in Applied Sciences, 4 (3), 263–271.
   Google Scholar
• Cox, A.D., Eason, G., and Hopkins, H.G., 1961. Axially symmetric plastic deformations in soils. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 254, 1–45. doi:10.1098/rsta.1961.0011
   Web of Science ®Google Scholar
• De Beer, E.E., 1970. Experimental determination of the shape factors and the bearing capacity factors of sand. Géotechnique, 20, 387–411. doi:10.1680/geot.1970.20.4.387
   Web of Science ®Google Scholar
• Drescher, A. and Detournay, E., 1993. Limit load in translational failure mechanisms for associative and nonassociative materials. Géotechnique, 43, 443–456. doi:10.1680/geot.1993.43.3.443
   Web of Science ®Google Scholar
• Eason, G. and Shield, R.T., 1960. The plastic indentation of a semi-infinite solid by a perfectly rough circular punch. Zeitschrift für angewandte Mathematik und Physik, 11, 33–43. doi:10.1007/BF01591800
   Google Scholar
• Egorov, K.E., 1965. Calculation of bed for foundation with ring footing. Proceedings of the 6th International Conference on Soil Mechanics and Foundation Engineering, 2, 41–45 Montréal.
   Google Scholar
• El Sawwaf, M. and Nazir, A., 2012. Behavior of eccentrically loaded small-scale ring footings resting on reinforced layered soil. Journal of Geotechnical and Geoenvironmental Engineering, 138 (3), 376–384. doi:10.1061/(ASCE)GT.1943-5606.0000593
   Web of Science ®Google Scholar
• Erickson, H.L. and Drescher, A., 2002. Bearing capacity of circular footings. Journal of Geotechnical and Geoenvironmental Engineering, 128 (1), 38–43. doi:10.1061/(ASCE)1090-0241(2002)128:1(38)
   Web of Science ®Google Scholar
• Eurocode 7, 2004. Geotechnical design, part 1: general rules. Brussels: European committee for standardisation (CEN).
   Google Scholar
• Frydman, S. and Burd, H.J., 1997. Numerical studies of bearing capacity factor Nγ. J. Geotech. Geoenviron. Eng., 123 (1), 20–29. doi:10.1061/(ASCE)1090-0241(1997)123:1(20)
   Web of Science ®Google Scholar
• Griffiths, D.V., 1982. Computation of bearing capacity factors using finite elements. Géotechnique, 32, 195–202. doi:10.1680/geot.1982.32.3.195
   Web of Science ®Google Scholar
• Hansen, B.J., 1961. A general formula for bearing capacity. Copenhagen: Bulletin Geoteknisk Institute No. 11.
   Google Scholar
• ITASCA Consulting Group, Inc. Fast Lagrangian analysis of continua, 2000. Minneapolis, MN: ITASCA Consulting Group.
   Google Scholar
• Kumar, J. and Ghosh, P., 2005. Bearing capacity factor Nγ for ring footings using the method of characteristics. Canadian Geotechnical Journal, 42, 1474–1484. doi:10.1139/t05-051
   Web of Science ®Google Scholar
• Kumar, J. and Khatri, V.N., 2011. Bearing capacity factors of circular foundations for a general c - φ soil using lower bound finite elements limit analysis. International Journal for Numerical and Analytical Methods in Geomechanics, 35 (3), 393–405. doi:10.1002/nag.v35.3
   Web of Science ®Google Scholar
• Loukidis, D. and Salgado, R., 2009. Bearing capacity of strip and circular footings in sand using finite elements. Computers and Geotechnics, 36, 871–879. doi:10.1016/j.compgeo.2009.01.012
   Web of Science ®Google Scholar
• Manoharan, N. and Dasgupta, S.P., 1995. Bearing capacity of surface footings by finite elements. Computers & Structures, 54 (4), 563–586. doi:10.1016/0045-7949(94)00381-C
   Web of Science ®Google Scholar
• Martin, C.M., 2005. Exact bearing capacity calculations using the method of characteristics. Proceeding of 11th International Conference IACMAG, Turin, 4, 441–450.
   Google Scholar
• Meyerhof, G.G., 1951. The ultimate bearing capacity of foudations. Géotechnique, 2, :301-332. doi:10.1680/geot.1951.2.4.301
   Google Scholar
• Meyerhof, G.G., 1963. Some recent research on the bearing capacity of foundations. Canadian Geotechnical Journal, 1, 16–26. doi:10.1139/t63-003
   Google Scholar
• Michalowski, R.L. and Shi, L., 1995. Bearing capacity of footings over two-layer foundation soils. Journal of Geotechnical Engineering, 121 (5), 421–428. doi:10.1061/(ASCE)0733-9410(1995)121:5(421)
   Google Scholar
• Prandtl, L., 1921. Über die eindringungs-festigkeit plastisher baustoffe und die festigkeit von schneiden, ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 1 (1), 15–20. doi:10.1002/zamm.v1:1
   Google Scholar
• Reissner, H., 1924. Erddruckproblem. In: Edited by C.B. Biezeno and J.M. Burgers. Proceedings of the First International Congress for Applied Mechanics, pp. 295–311 April 1924 Delft, The Netherlands, 295–311.
   Google Scholar
• Saha, M.C., 1978. Ultimate bearing capacity of ring footings on sand. Thesis (MEng). University of Roorkee, Roorkee, UP, India.
   Google Scholar
• Saran, S., Bhandari, N.M., and Al-Smadi, M.M.A., 2003. Analysis of eccentrically–obliquely loaded ring footings on sand. Indian Geotechnical Journal, 33 (4), 422–446.
   Google Scholar
• Shield, R.T., 1955. On the plastic flow of metals under conditions of axial symmetry. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 233, 267–287. doi:10.1098/rspa.1955.0262
   Web of Science ®Google Scholar
• Terzaghi, K., 1943. Theoretical soil mechanics. New York, NY: Wiley.
   Google Scholar
• Zhao, L. and Wang, J.H., 2008. Vertical bearing capacity for ring footings. Computers and Geotechnics, 35 (2), 292–304. doi:10.1016/j.compgeo.2007.05.005
   Web of Science ®Google Scholar