Numerical simulation of the undrained stability of slopes in anisotropic fine-grained soils

References

• Al-Karni, A.A. and Al-Shamrani, M.A., 2000. Study of the effect of soil anisotropy on slope stability using method of slices. Computers and Geotechnics, 26, 83–103. doi:10.1016/S0266-352X(99)00046-4
   Web of Science ®Google Scholar
• Arthur, J.R.F., Chua, K.S., and Dunstan, T., 1977. Induced anisotropy in a sand. Géotechnique, 27 (1), 13–30. doi:10.1680/geot.1977.27.1.13
   Web of Science ®Google Scholar
• Baligh, M.M. and Levadoux, J., 1986. Consolidation after undrained piezocone penetration. II: interpretation. Journal of Geotechnical Engineering, 112 (7), 727–745. doi:10.1061/(ASCE)0733-9410(1986)112:7(727)
   Google Scholar
• Bishop, A.W., 1955. The use of the slip circle in the stability analysis of slopes. Géotechnique, 5 (1), 7–17. doi:10.1680/geot.1955.5.1.7
   Google Scholar
• Bishop, A.W., Webb, D.L., and Lewin, P.I., 1965. Undisturbed samples of London clay from the Ashford Common shaft: strength–effective stress relationships. Géotechnique, 15 (1), 1–31. doi:10.1680/geot.1965.15.1.1
   Web of Science ®Google Scholar
• Brinkgreve, R.B.J., Kumarswamy, S., and Swolfs, W.M., 2017. PLAXIS 2017. Users’ manual. Delft, Netherlands: Plaxis bv.
   Google Scholar
• Casagrande, A. and Carrillo, N., 1944. Shear failure of anisotropic materials. Journal of the Boston Society of Civil Engineers, 31, 74–87.
   Google Scholar
• Chen, W.F., Snitbhan, N., and Fang, H.Y., 1975. Stability of slopes in anisotropic, nonhomogeneous soils. Canadian Geotechnical Journal, 12 (1), 146–152. doi:10.1139/t75-014
   Web of Science ®Google Scholar
• Cho, J.W., et al., 2012. Deformation and strength anisotropy of Asan gneiss, Boryeong shale, and Yeoncheon schist. International Journal of Rock Mechanics and Mining Sciences, 50, 158–169. doi:10.1016/j.ijrmms.2011.12.004
   Web of Science ®Google Scholar
• Duncan, J.M., 2000. Factors of safety and reliability in geotechnical engineering. Journal of Geotechnical and Geoenvironmental Engineering, 126 (4), 307–316. doi:10.1061/(ASCE)1090-0241(2000)126:4(307)
   Web of Science ®Google Scholar
• Duncan, J.M. and Buchignani, A.L., 1973. Failure of underwater slope in San Francisco Bay. Journal of the Soil Mechanics and Foundations Division, 99 (9), 687–703.
   Google Scholar
• Duncan, J.M., Wright, S.G., and Brandon, T.L., 2014. Soil strength and slope stability. 2nd. Hoboken, NJ: Wiley.
   Google Scholar
• Fleming, L.N. and Duncan, J.M., 1990. Stress-deformation characteristics of Alaskan silt. Journal of Geotechnical Engineering, 116 (3), 377–393. doi:10.1061/(ASCE)0733-9410(1990)116:3(377)
   Google Scholar
• Griffiths, D.V. and Lane, P.A., 1999. Slope stability analysis by finite elements. Geotechnique, 49 (3), 387–403. doi:10.1680/geot.1999.49.3.387
   Web of Science ®Google Scholar
• Hight, D.W., et al., 2007. Characteristics of the London Clay from the Terminal 5 site at Heathrow Airport. Géotechnique, 57 (1), 3–18. doi:10.1680/geot.2007.57.1.3
   Web of Science ®Google Scholar
• Hight, D.W., Gens, A., and Symes, M.J., 1983. The development of a new hollow cylinder apparatus for investigating the effects of principal stress rotation in soils. Géotechnique, 33 (4), 355–383. doi:10.1680/geot.1983.33.4.355
   Web of Science ®Google Scholar
• Jardine, R.J. and Menkiti, C.O., 1999. The undrained anisotropy of K0 consolidated sediments. In: Proceedings of the 12th European Conference on Soil Mechanics and Geotechnical Engineering. Amsterdam, 1101–1108.
   Google Scholar
• Ladd, C.C. and Varallyay, J., 1965. The influence of the stress system on the behavior of saturated clays during undrained shear. Cambridge, MA: M.I.T.
   Google Scholar
• Lade, P.V. and Kirkgard, M.M., 2000. Effects of stress rotation and changes of b-values on cross-anisotropic behaviour of natural, K0-consolidated soft clay. Soils and Foundations, 40 (6), 93–105. doi:10.3208/sandf.40.6_93
   Google Scholar
• Mánica, M., et al., 2016. A cross-anisotropic formulation for elasto-plastic models. Géotechnique Letters, 6, 1–7. doi:10.1680/jgele.15.00182
   Web of Science ®Google Scholar
• Mánica, M., et al., 2018. Nonlocal plasticity modelling of strain localization in stiff clays. Computers and Geotechnics, submitted.
   Google Scholar
• McLamore, R. and Gray, K.E., 1967. The mechanical behavior of anisotropic sedimentary rocks. Journal of Engineering for Industry-Transactions of the ASME, 89 (1), 62–73. doi:10.1115/1.3610013
   Google Scholar
• Menkiti, C.O., 1995. Behaviour of clay and clayey-sand, with particular reference to principal stress rotation. London, UK: Imperial College of London.
   Google Scholar
• Mills-Curran, W.C., 1988. Calculation of eigenvector derivatives for structures with repeated eigenvalues. AIAA Journal, 26 (7), 867–871. doi:10.2514/3.9980
   Web of Science ®Google Scholar
• Naumann, M., Hunsche, U., and Schulze, O., 2007. Experimental investigations on anisotropy in dilatancy, failure and creep of Opalinus Clay. Physics and Chemistry of the Earth, 32 (8–14), 889–895. doi:10.1016/j.pce.2005.04.006
   Web of Science ®Google Scholar
• Nelson, R.B., 1976. Simplified calculation of eigenvector derivatives. AIAA Journal, 14 (9), 1201–1205. doi:10.2514/3.7211
   Web of Science ®Google Scholar
• Niandou, H., et al., 1997. Laboratory investigation of the mechanical behaviour of Tournemire shale. International Journal of Rock Mechanics and Mining Sciences, 34 (1), 3–16. doi:10.1016/S1365-1609(97)80029-9
   Web of Science ®Google Scholar
• Nishimura, S., Minh, N.A., and Jardine, R.J., 2007. Shear strength anisotropy of natural London Clay. Géotechnique, 57 (1), 49–62. doi:10.1680/geot.2007.57.1.49
   Web of Science ®Google Scholar
• Pietruszczak, S. and Mroz, Z., 2000. Formulation of anisotropic failure criteria incorporating a microstructure tensor. Computers and Geotechnics, 26 (2), 105–112. doi:10.1016/S0266-352X(99)00034-8
   Web of Science ®Google Scholar
• Potts, D.M., Kovacevic, N., and Vaughan, P.R., 1997. Delayed collapse of cut slopes in stiff clay. Géotechnique, 47 (5), 953–982. doi:10.1680/geot.1997.47.5.953
   Web of Science ®Google Scholar
• Press, W.H., Teukolsky, S.A., Vetterling, W.T., and Flannery, B.P., 1992. Numerical Recipes in Fortran 77: the Art of Scientific Computing. Cambridge: Cambridge University Press.
   Google Scholar
• Roscoe, K.H., 1970. The influence of strains in soil mechanics. Géotechnique, 20 (2), 129–170. doi:10.1680/geot.1970.20.2.129
   Web of Science ®Google Scholar
• Sayers, C.M., 2013. The effect of anisotropy on the Young’s moduli and Poisson’s ratios of shales. Geophysical Prospecting, 61 (2), 416–426. doi:10.1111/gpr.2013.61.issue-2
   Web of Science ®Google Scholar
• Schweiger, H.F., et al., 2009. A multilaminate framework for modelling induced and inherent anisotropy of soils. Géotechnique, 59 (2), 87–101. doi:10.1680/geot.2008.3770
   Web of Science ®Google Scholar
• Seah, T.H., 1990. Anisotropy of resedimented Boston Blue Clay. Cambridge, Massachusetts: Massachusetts Institute of Technology.
   Google Scholar
• Sheahan, T.C., Ladd, C.C., and Germaine, J.T., 1996. Rate-dependent undrained shear behavior of saturated clay. Journal of Geotechnical Engineering, 122 (2), 99–108. doi:10.1061/(ASCE)0733-9410(1996)122:2(99)
   Google Scholar
• Simo, J.C. and Hughes, T.J.R., 1998. Computational Inelasticity. New York: Springer.
   Google Scholar
• Skempton, A., 1961. Horizontal stresses in an overconsolidated eocene clay. In: Proceedings of the 5th International Conference on Soil Mechanics and Fundation Engineering. Paris, 351–357.
   Google Scholar
• Skempton, A.W. and Hutchinson, J.N., 1969. Stability of natural slopes and embankment foundations. In: Proceedings of the 7th international conference on soil mechanics and foundation engineering. Mexico, 291–340.
   Google Scholar
• Sloan, S.W. and Booker, J.R., 1986. Removal of singularities in Tresca and Mohr–coulomb yield functions. Communications in Applied Numerical Methods, 2, 173–179. doi:10.1002/cnm.1630020208
   Google Scholar
• Su, S.F. and Liao, H.J., 1999. Effect of strength anisotropy on undrained slope stability in clay. Géotechnique, 49 (2), 215–230. doi:10.1680/geot.1999.49.2.215
   Web of Science ®Google Scholar
• Taylor, D.W., 1937. Stability of earth slopes. Journal of the Boston Society of Civil Engineers, 24, 197–246.
   Google Scholar
• Ward, W.H., Marsland, A., and Samuels, S.G., 1965. Properties of the London Clay at the Ashford Common Shaft: in-situ and undrained strength tests. Géotechnique, 15 (4), 321–344. doi:10.1680/geot.1965.15.4.321
   Web of Science ®Google Scholar
• Whittle, A.J. and Kavvadas, M.J., 1994. Formulation of MIT‐E3 constitutive model for overconsolidated clays. Journal of Geotechnical Engineering, 120 (1), 173–198. doi:10.1061/(ASCE)0733-9410(1994)120:1(173)
   Google Scholar
• Wolf, K., 1935. Ausbreitung der kraft in der halbebene und ins halbraum bei anisotropen material. Zeitschrift Für Angewandte Mathematik Und Mechanik, 15, 249–254. doi:10.1002/zamm.19350150502
   Google Scholar
• Zdravkovic, L. and Jardine, R.J., 2000. Undrained anisotropy of Ko-consolidated silt. Canadian Geotechnical Journal, 37, 178–200. doi:10.1139/t99-094
   Web of Science ®Google Scholar
• Zdravković, L., Potts, D.M., and Hight, D.W., 2002. The effect of strength anisotropy on the behaviour of embankments on soft ground. Géotechnique, 52 (6), 447–457. doi:10.1680/geot.2002.52.6.447
   Web of Science ®Google Scholar