Effect of using transient polyaxial failure criterion in wellbore instability analysis

References

• Aadnoy, B.S. and Ong, S., 2003. Introduction to special issue on borehole stability. Journal of Petroleum Science and Engineering, 38 (3–4), 79–82. doi:10.1016/S0920-4105(03)00022-6
   Web of Science ®Google Scholar
• Abousleiman, Y., Ekbote, S., and Tare, U., 2000. Time-dependent wellbore (In)stability prediction: theory and case study. SPE- 62796-MS. doi:10.2118/62796-MS
   Google Scholar
• Al-Ajmi, A.M., 2006. Wellbore stability analysis based on a new true-triaxial failure criteria. Ph.D. Thesis. TRITA-LWR 1026, Royal Institute of Technology, Stockholm.
   Google Scholar
• Al-Ajmi, A.M. and Zimmerman, R.W., 2005. Relationship between the Mogi and the Coulomb failure criteria. International Journal of Rock Mechanics and Mining Sciences, 42 (3), 431–439. doi:10.1016/j.ijrmms.2004.11.004
   Web of Science ®Google Scholar
• Anthony, J.L. and Crook, J.Y., 2002. Development of an orthotropic 3D elastoplastic material model for shale. In: Proc SPE/ISRM Rock Mech Conf, Irving, 20–23 October Texas. SPE 78238. doi:10.1044/1059-0889(2002/er01)
   Google Scholar
• Chuanliang, Y., Jinjing, D., and Baohua, Y., 2013. Wellbore stability in oil and gas drilling with chemical-mechanical coupling. The Scientific World Journal, Hindawi, 2013, 1–9. doi: 10.1155/2013/720271
   Google Scholar
• Colback, P.S.B. and Wiid, B.L., 1965. The influence of moisture content on the compressive strength of rock. In:Proc. Third Canadian Sym posium on Rock Mechanics, Toronto.
   Google Scholar
• Ding, D.Y., 2011. Coupled simulation of near-wellbore and reservoir models. Journal of Petroleum Science and Engineering, 76 (1/2), 21–36. doi:10.1016/j.petrol.2010.12.004
   Web of Science ®Google Scholar
• Ewy, R.T. and Stankovich, R.J., 2002. Shale-fluid interaction measured under simulated downhole condition. SPE/ISRM 78160. In: SPE/ISRM Rock Mechanics Conference, October Irving, Texas, 20–23.
   Google Scholar
• Fjær, E., et al., 2008. Petroleum related rock mechanics. 2nd ed. Amsterdam: Elsevier, 143–148, 324–338.
   Google Scholar
• Gentzis, T., Deisman, N., and Chalaturnyk, R.J., 2009. A method to predict geomechanical properties and model well stability in horizontal boreholes. International Journal of Coal Geology, 78 (2), 149–160. doi:10.1016/j.coal.2008.11.001
   Web of Science ®Google Scholar
• Gholami, R., et al. 2013. Practical application of failure criteria in determining safe mud weight windows in drilling operations. Journal of Rock Mechanics and Geotechnical Engineering, 55. doi:10.1016/j.jrmge.2013.11.002
   Google Scholar
• Haimson, B. and Chang, C., 2005. Brittle fracture in two crystalline rocks under true triaxial compressive stresses. Geological Society, London, Special Publications, 240, 47–59. doi:10.1144/GSL.SP.2005.240.01.05
   Google Scholar
• Hoek, E., 1966. Rock mechanics-an introduction to the practical engineers, part I, II, and III. Mining Magazine, p. 9–11.
   Google Scholar
• Husen, A.A.A., et al., 2003. Watching rock change-mechanical earth modelling. Oilfield Review 15(2) no. 2, 22–39.
   Google Scholar
• Maury, V.M. and Sauzay, J.M.G., 1987. Borehole instability: case histories, rock mechanics approach. In: SPE/IADC Drilling Conf, New Orleans, Louisiana, 15–18 March. SPE/IADC 16051.
   Google Scholar
• McLean, M. and Addis, M., 1990. Wellbore stability analysis: a review of current methods of analysis and their field application. In: Proc IADC/SPE Drilling Conf, 27–2 February – March Houston: SPE 19941. doi:10.1099/00221287-136-2-327
   Google Scholar
• Mody, F.K. and Hale, A.H., 1993. Borehole stability model to couple the mechanics and chemistry for drilling fluid shale interaction. Journal of Petroleum Technology, 45, 1093–1101. doi:10.2118/25728-PA
   Google Scholar
• Mohammad, E.Z., 2012. Mechanical and physical-chemical aspects of wellbore stability during drilling operations. Journal of Petroleum Science and Engineering, 82–83, 120–124. doi:10.1016/j.petrol.2012.01.006
   Web of Science ®Google Scholar
• Osisanya, S.O., 2011. Practical approach to solving wellbore instability problems, SPE Distinguished Lecturer Program, 2011–2012. .
   Google Scholar
• Rahman, M.K., Naseby, D., and Rahman, S.S., 2000. Borehole collapse analysis incorporating time-dependent pore pressure due to mud penetration in shales. Journal of Petroleum Science and Engineering, 28 (1–2), 13–31. doi:10.1016/S0920-4105(00)00064-4.
   Web of Science ®Google Scholar
• Song, I. and Haimson, B.C., 1997. Polyaxial strength criteria and their use in estimating in situ stress magnitudes from borehole breakout dimensions. International Journal of Rock Mechanics and Mining Sciences, 34, 3–4. doi:10.1016/S1365-1609(97)00240-2
   Google Scholar
• Walsh, J.B. and Brace, W.F., 1964. A fracture criterion for anisotropic rock. The Journal of Geophysical Research, 69 (16), 3449–3456. doi:10.1029/JZ069i016p03449
   Google Scholar
• Westergaard, H.M., 1940. Plastic state of stress around a deep well. Journal of Boston Society of Civil Engineering, 27, 1–5.
   Google Scholar
• Zhang, Q., et al. A review of the shale wellbore stability mechanism based on mechanical-chemical coupling theories. Petroleum, 1 (2015), 91–96. doi:10.1016/j.petlm.2015.06.005
   Google Scholar
• Zhou, S.H., Hillis, R.R., and Sandiford, M., 1996. On the mechanical stability of inclined wellbores. SPE Drilling & Completion, 11 (2), 67–73. doi:10.2118/28176-PA
   Web of Science ®Google Scholar