Reliability-based design of spread footings on fibre-reinforced clay

References

• Abou Diab, A. 2017. “Undrained Response of Fiber-Reinforced Cohesive Soils.” PhD diss., American University of Beirut, Lebanon.
   Google Scholar
• Abou Diab, A., S. Sadek, S. Najjar, and M. H. Abou Daya. 2016. “Undrained Shear Strength Characteristics of Compacted Clay Reinforced with Natural Hemp Fibers.” International Journal of Geotechnical Engineering 10 (3): 263–270. doi: 10.1080/19386362.2015.1132122
   Web of Science ®Google Scholar
• Akbulut, S., S. Arasan, and E. Kalkan. 2007. “Modification of Clayey Soils Using Scrap Tire Rubber and Synthetic Fibers.” Applied Clay Science 38 (1): 23–32. doi: 10.1016/j.clay.2007.02.001
   Web of Science ®Google Scholar
• Amatya, S., S. G. Paikowsky, K. Lesny, and A. Kisse. 2009. "Uncertainties in the Bearing Capacity of Shallow Foundations and the Factor Ny Using an Extensive Database." Proceedings of the international foundation congress and equipment expo, ASCE, Orlando, FL, March 15–19, 2009, 403–410.
   Google Scholar
• Anagnostopoulos, C. A., D. Tzetzis, and K. Berketis. 2014. “Shear Strength Behavior of Polypropylene Fiber Reinforced Cohesive Soils.” Geomechanics and Geoengineering 9 (3): 241–251. doi: 10.1080/17486025.2013.804213
   Google Scholar
• Bergman, N., R. Ignat, and S. Larsson. 2013. “Serviceability Limit State Design of Lime-Cement Columns–A Reliability based Design Approach.” In Geotechnical Safety and Risk IV, edited by Zhang et al., 417–422. Hong Kong: Taylor & Francis Group.
   Google Scholar
• Chen, M., S. L. Shen, A. Arulrajah, H. N. Wu, D. W. Hou, and Y. S. Xu. 2015. “Laboratory Evaluation on the Effectiveness of Polypropylene Fibers on the Strength of Fiber-Reinforced and Cement-Stabilized Shanghai Soft Clay.” Geotextiles and Geomembranes 43 (6): 515–523. doi: 10.1016/j.geotexmem.2015.05.004
   Web of Science ®Google Scholar
• Cherubini, C. 1997. “Data and Considerations on the Variability of Geotechnical Properties of Soils.” Paper presented at the proceedings of the international conference on safety and reliability, ESREL, Lisbon, Portugal, June 17–20, 1997, 1583–1591.
   Google Scholar
• Cherubini, C. 2000. “Reliability Evaluation of Shallow Foundation Bearing Capacity on c’-ϕ’ Soils.” Canadian Geotechnical Journal 37 (1): 264–269.
   Web of Science ®Google Scholar
• Correia, A. A., P. J. V. Oliveira, and D. G. Custódio. 2015. “Effect of Polypropylene Fibers on the Compressive and Tensile Strength of a Soft Soil, Artificially Stabilized with Binders.” Geotextiles and Geomembranes 43 (2): 97–106. doi: 10.1016/j.geotexmem.2014.11.008
   Web of Science ®Google Scholar
• Cristelo, N., V. M. Cunha, M. Dias, A. T. Gomes, T. Miranda, and N. Araújo. 2015. “Influence of Discrete Fiber Reinforcement on the Uniaxial Compression Response and Seismic Wave Velocity of a Cement-Stabilized Sandy-Clay.” Geotextiles and Geomembranes 43 (1): 1–13. doi: 10.1016/j.geotexmem.2014.11.007
   Web of Science ®Google Scholar
• El-Ramly, H., N. R. Morgenstern, and D. M. Cruden. 2002. “Probabilistic Slope Stability Analysis for Practice.” Canadian Geotechnical Journal 39 (3): 665–683. doi: 10.1139/t02-034
   Web of Science ®Google Scholar
• Gregory, G. H. 2006. “Shear Strength, Creep and Stability of Fiber-Reinforced Soil Slopes.” PhD diss., Oklahoma State University, United States.
   Google Scholar
• Huffman, J. C., and A. W. Stuedlein. 2014. “Reliability-based Serviceability Limit State Design of Spread Footings Onaggregate Pier Reinforced Clay.” Journal of Geotechnical and Geoenvironmental Engineering 140 (10): 04014055. doi: 10.1061/(ASCE)GT.1943-5606.0001156
   Web of Science ®Google Scholar
• Jamei, M., P. Villard, and H. Guiras. 2013. “Shear Failure Criterion Based on Experimental and Modeling Results for Fiber-Reinforced Clay.” International Journal of Geomechanics 13 (6): 882–893. doi: 10.1061/(ASCE)GM.1943-5622.0000258
   Web of Science ®Google Scholar
• Jiang, H., Y. Cai, and J. Liu. 2010. “Engineering Properties of Soils Reinforced by Short Discrete Polypropylene Fiber.” Journal of Materials in Civil Engineering 22 (12): 1315–1322. doi: 10.1061/(ASCE)MT.1943-5533.0000129
   Web of Science ®Google Scholar
• Kahiel, A., S. Najjar, and S. Sadek. 2017a. “Reliability-Based Design of Spread Footings on Clays Reinforced with Aggregate Piers.” Georisk Journal, 11 (1): 75–89.
   Google Scholar
• Kahiel, A., S. S. Najjar, and S. Sadek. 2017b. “Incorporating Model Uncertainty and Spatial Variability in the Design of Footings on Clays Reinforced with Stone Columns.” Paper presented at the proceedings of the georisk conference, Boulder, Colorado, USA, June, 6–8.
   Google Scholar
• Kumar, A., and D. Gupta. 2016. “Behavior of Cement-Stabilized Fiber-Reinforced Pond Ash, Rice Husk Ash–Soil Mixtures.” Geotextiles and Geomembranes 44 (3): 466–474. doi: 10.1016/j.geotexmem.2015.07.010
   Web of Science ®Google Scholar
• Li, J. H., M. J. Cassidy, Y. Tian, J. Huang, A. V. Lyamin, and M. Uzielli. 2016. “Buried Footings in Random Soils: Comparison of Limit Analysis and Finite Element Analysis.” Georisk Journal, 10 (1): 55–65.
   Google Scholar
• Maher, M., and Y. Ho. 1994. “Mechanical Properties of Kaolinite/Fiber Soil Composite.” Journal of Geotechnical Engineering 120 (8): 1381–1393. doi: 10.1061/(ASCE)0733-9410(1994)120:8(1381)
   Google Scholar
• Maheshwari, K. V., A. K. Desai, and C. H. Solanki. 2011. “Performance of Fiber Reinforced Clayey Soil.” Electronic Journal of Geotechnical Engineering 16: 1067–1082.
   Google Scholar
• Meyerhof, G. G., and A. M. Hanna. 1978. “Ultimate Bearing Capacity of Foundations on Layered Soils under Inclined Load.” Canadian Geotechnical Journal 15 (4): 565–572. doi: 10.1139/t78-060
   Web of Science ®Google Scholar
• Michalowski, R., and A. Zhao. 1996. “Failure of Fiber-Reinforced Granular Soils.” Journal of Geotechnical Engineering 122 (3): 226–234. doi: 10.1061/(ASCE)0733-9410(1996)122:3(226)
   Google Scholar
• Najjar, S. S., G. Saad, and Y. Abdallah. 2017. “Rational Decision Framework for Designing Pile Load Test Programs.” Geotechnical Testing Journal, ASTM 40 (2): 302–316.
   Web of Science ®Google Scholar
• Najjar, S., S. Sadek, and A. Alcovero. 2013. “Quantification of Model Uncertainty in Shear Strength Predictions for Fiber-Reinforced Sand.” Journal of Geotechnical and Geoenvironmental Engineering 139 (1): 116–133. doi: 10.1061/(ASCE)GT.1943-5606.0000742
   Web of Science ®Google Scholar
• Najjar, S., S. Sadek, and H. Taha. 2014. “Use of Hemp Fibers in Sustainable Compacted Clay Systems.” Paper presented at the geo-congress 2014 technical papers, geo-characterization and modeling for sustainability, ASCE, Atlanta, Georgia, USA, February 2014, 1415–1424.
   Google Scholar
• Najjar, S. S., E. Shammas, and M. Saad. 2014. “Updated Normalized Load-Settlement Model for Full-Scale Footings on Granular Soils.” Georisk Journal 8 (1): 63–80.
   Google Scholar
• Nataraj, M. S., and K. L. McManis. 1997. “Strength and Deformation Properties of Soils Reinforced with Fibrillated Fibers.” Geosynthetics International 4 (1): 65–79. doi: 10.1680/gein.4.0089
   Web of Science ®Google Scholar
• Nishimura, S. I., and H. Shimizu. 2008. “Reliability-Based Design of Ground Improvement for Liquefaction Mitigation.” Structural Safety 30 (3): 200–216. doi: 10.1016/j.strusafe.2006.11.002
   Web of Science ®Google Scholar
• Phoon, K. K. 2017. “Role of Reliability Calculation in Geotechnical Design.” Georisk Journal, 11 (1): 4–21.
   Google Scholar
• Phoon, K. K., and F. H. Kulhawy. 1999. “Characterization of Geotechnical Variability.” Canadian Geotechnical Journal, 36 (4): 612–624. doi: 10.1139/t99-038
   Web of Science ®Google Scholar
• Plé, O., and T. Lê. 2012. “Effect of Polypropylene Fiber-Reinforcement on the Mechanical Behavior of Silty Clay.” Geotextiles and Geomembranes 32: 111–116. doi: 10.1016/j.geotexmem.2011.11.004
   Web of Science ®Google Scholar
• Prabakar, J., and R. S. Sridhar. 2002. “Effect of Random Inclusion of Sisal Fiber on Strength Behavior of Soil.” Construction and Building Materials 16 (2): 123–131. doi: 10.1016/S0950-0618(02)00008-9
   Web of Science ®Google Scholar
• Sadek, S., S. Najjar, and F. Freiha. 2010. “Shear Strength of Fiber-Reinforced Sands.” Journal of Geotechnical and Geoenvironmental Engineering 136 (3): 490–499. doi: 10.1061/(ASCE)GT.1943-5606.0000235
   Web of Science ®Google Scholar
• Shukla, S. K. 2017. Fundamentals of Fiber-Reinforced Soil Engineering. Singapore: Springer.
   Google Scholar
• Soubra, A. H., and D. S. Massih. 2007. “Reliability-Based Analysis and Design of Obliquely Loaded Footings.” Paper presented at the probabilistic applications in geotechnical engineering, ASCE, Denver, Colorado, February 18–21, 2007, 1–10.
   Google Scholar
• Strahler, A. W., and A. W. Stuedlein. 2014. “Accuracy, Uncertainty, and Reliability of the Bearing-Capacity Equation for Shallow Foundations on Saturated Clay.” In Geo-Congress 2014: Geo-Characterization and Modeling for Sustainability, ASCE, Atlanta, Georgia, February 23–26, 2014, 3262–3273
   Google Scholar
• Tang, C., B. Shi, W. Gao, F. Chen, and Y. Cai. 2007. “Strength and Mechanical Behavior of Short Polypropylene Fiber Reinforced and Cement Stabilized Clayey Soil.” Geotextiles and Geomembranes 25 (3): 194–202. doi: 10.1016/j.geotexmem.2006.11.002
   Web of Science ®Google Scholar
• Vanmarcke, E. 1983. Random Fields: Analysis and Synthesis. Cambridge, MA: MIT.
   Google Scholar
• Wolff, T. H. 1985. “Analysis and Design of Embankment Dam Slopes: A Probabilistic Approach.” PhD diss., Purdue University, Lafayette, Indiana.
   Google Scholar
• Wu, Y., Y. Li, and B. Niu. 2014. “Assessment of the Mechanical Properties of Sisal Fiber-Reinforced Silty Clay Using Triaxial Shear Tests.” The Scientific World Journal 2014, Article ID 436231, 9 pages.
   Google Scholar
• Zhang, W., and A. T. C. Goh. 2012. “Reliability Assessment on Ultimate and Serviceability Limit States and Determination of Critical Factor of Safety for Underground Rock Caverns.” Tunnelling and Underground Space Technology, 32: 221–230. doi: 10.1016/j.tust.2012.07.002
   Web of Science ®Google Scholar
• Zornberg, J. G. 2002. “Discrete Framework for Limit Equilibrium Analysis of Fiber-Reinforced Soil.” Géotechnique 52 (8): 593–604. doi: 10.1680/geot.2002.52.8.593
   Web of Science ®Google Scholar