References
- Ahsanullah, S. I., & Van Zandt, S. (2014). The impact of zoning regulations on thermal comfort in non-conditioned housing in hot, humid climates: Findings from Dhaka, Bangladesh. Journal of Housing and the Built Environment, 29(4), 677–697. doi: 10.1007/s10901-013-9373-2
- INEC (2014). Anuario de estadísticas de e dificaciones 2014 (Tech. Rep).
- IES (2014). Apache tables user guide (Vol. 1; Tech. Rep. No. 2014).
- ASHRAE. (2004). Standard thermal environmental conditions for human occupancy. Atlanta, GA: The Society.
- ASHRAE. (2005). ASHRAE handbook: Fundamentals – SI edition. Atlanta, GA: ASHRAE.
- Barbaresi, A., Dallacasa, F., Torreggiani, D., & Tassinari, P. (2017). Retrofit interventions in non-conditioned rooms: Calibration of an assessment method on a farm winery. Journal of Building Performance Simulation, 10(1), 91–104. doi: 10.1080/19401493.2016.1141994
- Brito Filho, J. P., & Santos, T. V. O. (2014). Thermal analysis of roofs with thermal insulation layer and reflective coatings in subtropical and equatorial climate regions in Brazil. Energy and Buildings, 84, 466–474. doi: 10.1016/j.enbuild.2014.08.042
- Butera, F. M. (2013). Zero-energy buildings: The challenges. Advances in Building Energy Research, 7(1), 51–65. doi: 10.1080/17512549.2012.756430
- Crawley, D. B., Hand, J. W., Kummert, M., & Griffith, B. T. (2008). Contrasting the capabilities of building energy performance simulation programs. Building and Environment, 43(4), 661–673. doi: 10.1016/j.buildenv.2006.10.027
- Fabbri, K. (2015). Indoor thermal comfort perception (pp. 7–23). Springer International.
- Ferrante, A. (2012). Zero- and low-energy housing for the Mediterranean climate. Advances in Building Energy Research, 6(1), 81–118. doi: 10.1080/17512549.2012.672003
- Fonti, A., Comodi, G., Pizzuti, S., Arteconi, A., & Helsen, L. (2017). Low order grey-box models for short-term thermal behavior prediction in buildings. Energy Procedia, 105, 2107–2112. doi: 10.1016/j.egypro.2017.03.592
- Genova, E., Fatta, G., & Broström, T. (2015). Categorization of the historic architecture in palermo for the purpose of energy assessment. In Scartezzini, Jean-Louis (Ed.), Proceedings of international conference CISBAT 2015 future buildings and districts sustainability from Nano to urban scale (pp. 499–504). Lausanne: LESO-PB, EPFL.
- Giancola, E., Soutullo, S., Olmedo, R., & Heras, M. R. (2014). Evaluating rehabilitation of the social housing envelope: Experimental assessment of thermal indoor improvements during actual operating conditions in dry hot climate, a case study. Energy and Buildings, 75, 264–271. doi: 10.1016/j.enbuild.2014.02.010
- Givoni, B. (1992). Comfort, climate analysis and building design guidelines. Energy and Buildings, 18(1), 11–23. doi: 10.1016/0378-7788(92)90047-K
- Gonçalves, J., & Fernández, J. (2015). The environmental design of working spaces in equatorial highlands zones: The case of Bogotá. Buildings, 5(4), 1105–1130. doi: 10.3390/buildings5041105
- Hajdukiewicz, M., Geron, M., & Keane, M. M. (2013). Formal calibration methodology for CFD models of naturally ventilated indoor environments. Building and Environment, 59, 290–302. doi: 10.1016/j.buildenv.2012.08.027
- Heo, Y., & Zavala, V. M. (2012). Gaussian process modeling for measurement and verification of building energy savings. Energy and Buildings, 53, 7–18. doi: 10.1016/j.enbuild.2012.06.024
- Kapsalaki, M., & Leal, V. (2011). Recent progress on net zero energy buildings. Advances in Building Energy Research, 5(1), 129–162. doi: 10.1080/17512549.2011.582352
- Kolokotsa, D., Rovas, D., Kosmatopoulos, E., & Kalaitzakis, K. (2011). A roadmap towards intelligent net zero- and positive-energy buildings. Solar Energy, 85(12), 3067–3084. doi: 10.1016/j.solener.2010.09.001
- Kumar, R., Garg, S., & Kaushik, S. (2005). Performance evaluation of multi-passive solar applications of a non air-conditioned building. International Journal of Environmental Technology and Management, 5(1), 60. doi: 10.1504/IJETM.2005.006507
- Mino-Rodriguez, I., Gaona, G., Lobato, A., Naranjo-Mendoza, C., & Labus, J. (2014). Implementation of GIS methodology and passive strategies to improve the quality of social housing in the Andean region of Ecuador. In Conference: World sustainable buildings 2014 (Vol. 3, pp. 148–156). Barcelona-Spain.
- Miño-Rodríguez, I., Naranjo-Mendoza, C., & Korolija, I. (2016). Thermal assessment of low-cost rural housing-a case study in the Ecuadorian Andes. Buildings, 6(3), 36. doi: 10.3390/buildings6030036
- Natarajan, S., Rodriguez, J., & Vellei, M. (2015). A field study of indoor thermal comfort in the subtropical highland climate of Bogota, Colombia. Journal of Building Engineering, 4, 237–246. doi: 10.1016/j.jobe.2015.10.003
- Ordóñez, F., Morales, C., López-Villada, J., & Vaca, S. (2018). Assessment of the energy gain of photovoltaic systems by using solar tracking in equatorial regions. Journal of Solar Energy Engineering, 140(3), 031003-1–031003-7. doi: 10.1115/1.4039095
- Roberti, F., Oberegger, U. F., & Gasparella, A. (2015). Calibrating historic building energy models to hourly indoor air and surface temperatures: Methodology and case study. Energy and Buildings, 108, 236–243. doi: 10.1016/j.enbuild.2015.09.010
- Rosenlund, H. (2000). Climatic design of buildings using passive techniques. Building Issues, 10(1), 3–26.
- Sadineni, S. B., Madala, S., & Boehm, R. F. (2011). Passive building energy savings: A review of building envelope components. Renewable and Sustainable Energy Reviews, 15(8), 3617–3631. doi: 10.1016/j.rser.2011.07.014
- Samuelson, H., Claussnitzer, S., Goyal, A., Chen, Y., & Romo-Castillo, A. (2016). Parametric energy simulation in early design: High-rise residential buildings in urban contexts. Building and Environment, 101, 19–31. doi: 10.1016/j.buildenv.2016.02.018
- Tang, R., Meir, I. A., & Wu, T. (2006). Thermal performance of non air-conditioned buildings with vaulted roofs in comparison with flat roofs. Building and Environment, 41(3), 268–276. doi: 10.1016/j.buildenv.2005.01.008
- Thapa, S., Bansal, A. K., & Panda, G. K. (2016). Adaptive thermal comfort in the two college campuses of Salesian College, Darjeeling - Effect of difference in altitude. Building and Environment, 109, 25–41. doi: 10.1016/j.buildenv.2016.09.013
- Udawattha, C., & Halwatura, R. (2018). Thermal performance and structural cooling analysis of brick, cement block, and mud concrete block. Advances in Building Energy Research, 12(2), 150–163. doi: 10.1080/17512549.2016.1257438
- Vivian, J., Zarrella, A., & Emmi, G. (2017). An evaluation of the suitability of lumped-capacitance models in calculating energy needs and thermal behaviour of buildings. Energy and Buildings, 150, 447–465. doi: 10.1016/j.enbuild.2017.06.021
- Wang, Y., Yoshino, Y., Liu, J., & Yang, L. (2017). A study on the actual conditions of residential environment and a solar energy applied house in the Tibetan Plateau. Journal of Asian Architecture and Building Engineering, 16(2), 403–408. doi: 10.3130/jaabe.16.403
- Yang, L., Yan, H., Xu, Y., & Lam, J. C. (2013). Residential thermal environment in cold climates at high altitudes and building energy use implications. Energy and Buildings, 62, 139–145. doi: 10.1016/j.enbuild.2013.02.058
- Zhang, Y., & Korolija, I. (2010). Performing complex parametric simulations with jEPlus. In SET 2010-9th international conference on sustainable energy technologies (pp. 22–27). Shanghai, China.