156
Views
1
CrossRef citations to date
0
Altmetric
Research Paper

The effect of SiC reinforcement on tribological behaviour of cold sprayed coatings in water

, , &
Pages 14-18 | Received 24 Dec 2015, Accepted 10 Jan 2017, Published online: 10 Feb 2017

References

  • Papyrin A, Kosarev V, Klinkov A, et al. Cold spray technology. 1st ed. Amsterdam: Elsevier; 2007. p. 1–32.
  • Gilmore DL, Dykhuizen RC, Neiser RA, et al. Particle velocity and deposition efficiency in the cold spray process. J Therm Spray Technol. 1999;8(4):576–582.10.1361/105996399770350278
  • Sansoucy E, Marcoux P, Ajdelsztajn L, et al. Properties of SiC-reinforced aluminium alloy coatings produced by the cold gas dynamic spraying process. Surf Coat Technol. 2008;202:3988–3996.10.1016/j.surfcoat.2008.02.017
  • Lee HY, Jung SH, Lee SY, et al. Correlation between Al2O3 particles and interface of Al–Al2O3 coatings by cold spray. Appl Surf Sci. 2005;252:1891–1898.10.1016/j.apsusc.2005.03.148
  • Torres B, Garrido MA, Rico A, et al. Wear behaviour of thermal spray Al/SiCp coatings. Wear. 2010;268:828–836.10.1016/j.wear.2009.12.006
  • Champagne V. The cold spray materials deposition process. 1st ed. Cambridge: Woodhead and Maney; 2007.
  • Meydanoglu O, Jodoin B, Kayali ES. Microstructure, mechanical properties and corrosion performance of 7075 Al matrix ceramic particle reinforced composite coatings produced by the cold gas dynamic spraying process. Surf Coat Technol. 2013;108–116.10.1016/j.surfcoat.2013.07.020
  • Shockley JM, Descartes S, Vo P, et al. The influence of Al2O3 particle morphology on the coating formation and dry sliding wear behavior of cold sprayed Al–Al2O3 composites. Surf Coat Technol. 2015;270:324–333.10.1016/j.surfcoat.2015.01.057
  • Cavaliere P, Perrone A, Silvello A. Mechanical and microstructural behavior of nanocomposites produced via cold spray. Composites Part B. 2014;67:326–331.10.1016/j.compositesb.2014.07.023
  • Cavaliere P, Perrone A, Silvello A. Processing conditions affecting grain size and mechanical properties in nanocomposites produced via cold spray. J Therm Spray Technol. 2014;27(7):1089–1096.10.1007/s11666-014-0093-2
  • Wang Y, Normand B, Mary N, et al. Microstructure and corrosion behavior of cold sprayed SiCp/Al 5056 composite coatings. Surf Coat Technol. 2014;251:264–275.10.1016/j.surfcoat.2014.04.036
  • Hutchings IM. Tribology: friction and wear of engineering materials. London: CRC Press; 1992.
  • Stachowiak GM, Batchelor AW. Engineering tribology. Amsterdam: Elsevier; 2014.
  • Jahanmir S, Ozmen Y, Ives LK. Water lubrication of silicon nitride in sliding. Tribol Lett. 2004;17(3):409–417.10.1023/B:TRIL.0000044489.44053.be
  • Chen M, Kato K, Adachi K. Friction and wear of self-mated SiC and Si3N4 sliding in water. Wear. 2001;250:246–255.10.1016/S0043-1648(01)00648-2
  • Koivuluoto H, Bolelli G, Milanti A, et al. Microstructural analysis of high-pressure cold-sprayed Ni, NiCu and NiCu + Al2O3 coatings. Surf Coat Technol. 2015;268:224–229.10.1016/j.surfcoat.2014.09.007
  • Spencer K, Fabijanic DM, Zhang M-X. The influence of Al2O3 reinforcement on the properties of stainless steel cold spray coatings. Surf Coat Technol. 2012;206:3275–3282.10.1016/j.surfcoat.2012.01.031
  • Paksoy AH, Deprem O, Tazegul O, et al. Tribology of SiCp reinforced Al–12Si matrix composite coatings in water. Tribiol Int. Forthcoming. Available from: http://dx.doi.org/10.1016/j.triboint.2016.10.037 (in press).
  • Chen M, Kato K, Adachi K. Friction and wear of self-mated SiC and Si3N4, sliding in water. Wear. 2001;250:246–255.10.1016/S0043-1648(01)00648-2
  • Wu Z, Zhou F, Chen K, et al. Microstructure, mechanical and tribological properties of CrSiC coatings sliding against SiC and Al2O3 balls in water. Appl Surf Sci. 2016;368:129–139.10.1016/j.apsusc.2016.01.276
  • Spencer ND. Aqueous lubrication: natural and biomimetic approaches. Singapore: World Scientific; 2014.10.1142/7818

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.