Dry sliding wear behaviour of Ti–6Al–4V pin against SS316L disc in vacuum condition at high temperature

References

• Inagaki I, Takechi T, Shirai Y, et al. Application and features of titanium for the aerospace industry. Nippon steel & sumitomo metal technical report, 106; 2014. p. 22–27.
   Google Scholar
• Meyer Jr HW, & Kleponis DS. Modeling the high strain rate behavior of titanium undergoing ballistic impact and penetration. Int J Impact Eng. 2001;26(1–10):509–521. doi: 10.1016/S0734-743X(01)00107-5
   Web of Science ®Google Scholar
• Kumar D, Deepak KB, Muzakkir SM, et al. Enhancing tribological performance of Ti-6Al-4V by sliding process. Tribol Mater Surf Interfaces. 2018;137-143:1–7.
   Google Scholar
• Wang K. The use of titanium for medical applications in the USA. Mater Sci Eng A. 1996;213(1–2):134–137. doi: 10.1016/0921-5093(96)10243-4
   Web of Science ®Google Scholar
• Crupi V, Epasto G, Guglielmino E, et al. Influence of microstructure [alpha+ beta and beta] on very high cycle fatigue behaviour of Ti-6Al-4 V alloy. Int J Fatigue. 2017;95:64–75. doi: 10.1016/j.ijfatigue.2016.10.002
   Web of Science ®Google Scholar
• Boyer R, Collings EW, Welsch G. Materials properties handbook: titanium alloys. Materials Park, OH: ASM International; 1994. ISBN: 0871704811.
   Google Scholar
• Boyer RR, et al. An overview on the use of titanium in the aerospace industry. Mater Sci Eng A: Struct. 1996;213:103–114. doi: 10.1016/0921-5093(96)10233-1
   Web of Science ®Google Scholar
• Yue TM, Yu JK, Mei Z, et al. Excimer laser surface treatment of Ti–6Al–4 V alloy for corrosion resistance enhancement. Mater Lett. 2002;52(3):206–212. doi: 10.1016/S0167-577X(01)00395-0
   Web of Science ®Google Scholar
• Okazaki Y, Rao S, Ito Y, et al. Corrosion resistance, mechanical properties, corrosion fatigue strength and cytocompatibility of new Ti alloys without Al and V. Biomaterials. 1998;19(13):1197–1215. doi: 10.1016/S0142-9612(97)00235-4
   PubMed Web of Science ®Google Scholar
• Imam MA, Froes FH, Housley KL. Titanium and titanium alloys. Kirk-Othmer Encyclopedia Chem Technol. 2000: 1–41.
   Google Scholar
• Jaffee RI. The physical metallurgy of titanium alloys. Progr Met Phys. 1958;7:65–163. doi: 10.1016/0502-8205(58)90004-2
   Web of Science ®Google Scholar
• Budinski KG. Tribological properties of titanium alloys. Wear. 1991;151(2):203–217. doi: 10.1016/0043-1648(91)90249-T
   Web of Science ®Google Scholar
• Yerramareddy S, Bahadur S. The effect of laser surface treatments on the tribological behavior of Ti-6Al-4V. Wear. 1992;157(2):245–262. doi: 10.1016/0043-1648(92)90065-G
   Web of Science ®Google Scholar
• Chelliah N, Kailas SV. Synergy between tribo-oxidation and strain rate response on governing the dry sliding wear behavior of titanium. Wear. 2009;266(7–8):704–712. doi: 10.1016/j.wear.2008.08.011
   Web of Science ®Google Scholar
• Bassim MN, Odeshi AG. Shear strain localisation and fracture in high strength structural materials. Archiv Mater Sci. 2008;70:70.
   Google Scholar
• Kailas SV, Biswas SK. The role of strain rate response in plane strain abrasion of metals. Wear. 1995;181–183:648–653. doi: 10.1016/0043-1648(95)90181-7
   Web of Science ®Google Scholar
• Batra RC, Love BM. Adiabatic shear bands in functionally graded materials. J Therm Stresses. 2004;27(12):1101–1123. doi: 10.1080/01495730490498494
   Web of Science ®Google Scholar
• Clifton RJ, Duffy J, Hartely KA. On critical conditions for shear band formation at high strain rates. Metallurgical. 1984;18:443–448.
   Google Scholar
• Singh RA, Biswas SK, Kailas SV. Sliding wear of cadmium against alumina. Wear. 1999;225:770–776. doi: 10.1016/S0043-1648(98)00387-1
   Web of Science ®Google Scholar
• Vaquila I, Vergara LI, Passeggi MCG Jr, et al. Chemical reactions at surfaces: titanium oxidation. Surf Coat Technol. 1999;122(1):67–71. doi: 10.1016/S0257-8972(99)00420-X
   Web of Science ®Google Scholar
• Tarun MS, Sambrani R, Mishra A. Wear behaviour and microstructural analysis of commerically pure titanium and its alloys on dry sliding. Int J Mech Eng Robot Res. 2014;3(3):624.
   Google Scholar
• Lu D, Gu M, Shi Z. Materials transfer and formation of mechanically mixed layer in dry sliding wear of metal matrix composites against steel. Tribol Lett. 1999;6(1):57–61. doi: 10.1023/A:1019182817316
   Web of Science ®Google Scholar
• Ming Q, Yongzhen Z, Jun Z, et al. Correlation between the characteristics of the thermo-mechanical mixed layer and wear behaviour of Ti–6Al–4V alloy. Tribol Lett. 2006;22(3):227–231. doi: 10.1007/s11249-006-9088-6
   Web of Science ®Google Scholar
• Li XY, Tandon KN. Microstructural characterization of mechanically mixed layer and wear debris in sliding wear of an Al alloy and an Al based composite. Wear. 2000;245(1–2):148–161. doi: 10.1016/S0043-1648(00)00475-0
   Web of Science ®Google Scholar
• Young JL, Jr, Kuhlmann-Wilsdorf D, & Hull R. The generation of mechanically mixed layers (MMLs) during sliding contact and the effects of lubricant thereon. Wear. 2000;246(1–2):74–90. doi: 10.1016/S0043-1648(00)00456-7
   Web of Science ®Google Scholar
• Raj JA, Kailas SV. (2015, November). Effect of strain rate response and pin diameter on mechanically mixed layer formation and wear mechanisms in a Ti6Al4V–SS316L pair. In Proceedings of Malaysian International Tribology Conference 2015 (Vol. 2015, pp. 137–138). Malaysian Tribology Society.
   Google Scholar