References
- Annamalai M, Dhinesh B, Nanthagopal K, et al. An assessment on performance, combustion and emission behavior of a diesel engine powered by ceria nanoparticle blended emulsified biofuel. Energ Convers Manage. 2016;123:372–380.
- Basu S, Miglani A. Combustion and heat transfer characteristics of nanofluid fuel droplets: a short review. Int J Heat Mass Trans. 2016;96:482–503.
- Ramanan M, Yuvarajan D. Emission analysis on the influence of magnetite nanofluid on methyl ester in diesel engine. Atm Pollu Res. 2016;7:477–481.
- Tajudeen S, Velraj R. Nanoadditives: enhancement of combustion and performance characteristics of a CI diesel engine. Int J Appl Env Sci. 2014;9(4):1727–1741.
- Srinivasarao M, Anand RB. Performance and emission characteristics improvement studies on a biodiesel fuelled DICI engine using water and AlO(OH) nanoparticles. Appl Ther Engg. 2016;98: 636–645.
- Mehrdad, Tabatabaei M, Ardjmand M, et al. A novel soluble nano-catalyst in diesel–biodiesel fuel blends to improve diesel engines performance and reduce exhaust emissions. Fuel 2015;139:374–382.
- Singh N, S RS. Effect of CNT-emulsified fuel on performance emission and combustion characteristics of four stroke Diesel engine. Int J Current Engg Tech. 2015;5(1):477–485.
- Alias A, Thegaraju D, Sharma K. Effect of carbon nanotube dispersions to the palm oil diesel–biodiesel blend properties. Int Conf Mech Engg Res. 2013; Malaysia, Paper ID: P011:1–14.
- Banapurmath N, Sankaran R,Tumbal AV, et al. Experimental investigation on direct injection diesel engine fuelled with graphene, silver and multiwalled carbon nanotubes-biodiesel blended fuels. Int J Auto Engg and Tech. 3(4):129–138.
- Gan Y, Qiao L. Evaporation characteristics of fuel droplets with the addition of nanoparticles under natural and forced convections. Int J Heat Mass Tran. 2011;54:4913–4922.
- Basha J, Anand RB. The influence of nano additive blended biodiesel fuels on the working characteristics of a diesel engine. J Braz Soc Mech Sci Eng.
- Selvan V, Anand RB, Udayakumar M. Effect of Cerium oxide nanoparticles and Carbon nanotubes as fuel-borne additives in Diesterol blends on the performance, combustion and emission characteristics of a variable compression ratio engine. Fuel 2014;130:160–167.
- Tewari P, Doijode E, Banapurmath N, et al. Experimental investigations on a diesel engine fuelled with multiwalled carbon nanotubes blended biodiesel fuels. Int J Emerg Tech Adv Eng. 2013;3:72–76.
- Abu-Zaid A, An experimental study of the evaporation characteristics of emulsified liquid droplets. Heat Mass Trans. 2004;40:737–741.
- Gan Y, Qiao L. Optical properties and radiation-enhanced evaporation of nanofluid fuels containing carbon-based nanostructures. Energ Fuels 2012;26:4224–4230.
- Tyagi H et al. Increased hot-plate ignition probability for nanoparticle-laden diesel fuel. Nano Lett, 2008; 8:1410–1416.
- Gumus S, Ozcan H, Ozbey M, et al. Aluminum oxide and copper oxide nanodiesel fuel properties and usage in a compression ignition engine. Fuel 2016;163:80–87.
- Kannan G, Anand R. Experimental investigation on diesel engine with diestrole-water micro emulsions. Energy 2011;36:1680–1687.
- Nadeem M, Rangkuti C, Anuar K, et al. Diesel engine performance and emission evaluation using emulsified fuels stabilized by conventional and gemini surfactants. Fuel 2006;85:2111–2119.
- Mohsen G, Albert R. Combustion characteristics of colloidal droplets of jet fuel and carbon based nanoparticles. Fuel 2017;188:182–189.
- Jong BO, Harun MI, Varghese S, et al. Graphite oxide nanoparticles as diesel fuel additive for cleaner emissions and lower fuel consumption. Energ Fuel 2016.
- Ahmad MI, Hirofumi N, Hasannuddin AK, et al. An overview of utilizing water-in-diesel emulsion fuel in diesel engine and its potential research study. J Energ Inst. 2014;87:273–288.
- Sivaramakrishnan K, Ravikumar P. Optimization of operational parameters on performance and emissions of a diesel engine using biodiesel. Int J Environ Sci Technol. 2014;11:949–958.