Biodiesel derived from waste cooking oil in blends with ultra-low sulphur diesel and its spray macroscopic properties under split injection strategy

References

• Edenhofer O, Pichs-Madruga R, Sokona Y, et al. 2011. IPCC special report on renewable energy sources and climate change mitigation. Prepared By Working Group III of the Intergovernmental Panel on Climate Change, Cambridge University Press, Cambridge, UK.
   Google Scholar
• Kim KH, Jahan SA, Kabir E, et al. A review of airborne polycyclic aromatic hydrocarbons (PAHs) and their human health effects. Environ Int. 2013;60:71–80.
   PubMed Web of Science ®Google Scholar
• Puricelli S, Cardellini G, Casadei S, et al. A review on biofuels for light-duty vehicles in Europe. Renew Sust Energy Rev. 2021;137:110398.
   Web of Science ®Google Scholar
• Luque R, Herrero-Davila L, Campelo JM, et al. Biofuels: a technological perspective. Energy Environ. Sci. 2008;1(5):542–564.
   Web of Science ®Google Scholar
• Bashir MA, Wu S, Zhu J, et al. Recent development of advanced processing technologies for biodiesel production: a critical review. Fuel Process Technol. 2022;227:107120.
   Web of Science ®Google Scholar
• Viornery-Portillo EA, Bravo-Díaz B, Mena-Cervantes VY. Life cycle assessment and emission analysis of waste cooking oil biodiesel blend and fossil diesel used in a power generator. Fuel. 2020;281:118739.
   Web of Science ®Google Scholar
• Brown A, Waldheim L, Landälv I, et al. Advanced biofuels—potential for cost reduction. IEA Bioenergy. 2020;88:12–14.
   Google Scholar
• British Petroleum. 2020. BP statistical review of world energy. BP Report, London, UK.
   Google Scholar
• IRENA. 2019. Global energy transformation: the REmap transition pathway (background report to 2019 edition). Abu Dhabi: International Renewable Energy Agency.
   Google Scholar
• https://www.sedeco.cdmx.gob.mx/storage/app/media/FONDESO/Estrategia%20Ciudad%20Solar.pdf.
   Google Scholar
• Sheinbaum-Pardo C, Calderón-Irazoque A, Ramírez-Suárez M. Potential of biodiesel from waste cooking oil in Mexico. Biomass Bioenergy. 2013;56:230–238.
   Web of Science ®Google Scholar
• Mena Cervantes VY, Hernández-Altamirano R, García-Solares SM, et al. Biodiesel in circular economy. In: Biofuels in circular economy. Chennai, India: Springer Nature; 2022.
   Google Scholar
• Sadaf S, Iqbal J, Ullah I, et al. Biodiesel production from waste cooking oil: an efficient technique to convert waste into biodiesel. Sust Cities Soc. 2018;41:220–226.
   Web of Science ®Google Scholar
• Goh BHH, Chong CT, Ge Y, et al. Progress in utilisation of waste cooking oil for sustainable biodiesel and biojet fuel production. Energy Convers Manage. 2020;223:113296.
   Web of Science ®Google Scholar
• Zhao Y, Wang C, Zhang L, et al. Converting waste cooking oil to biodiesel in China: environmental impacts and economic feasibility. Renew Sust Energy Rev. 2021;140:110661.
   Web of Science ®Google Scholar
• Mathew A, Anand K. Comparison of engine characteristics with biodiesels produced from fresh and waste cooking oils. Biofuels. 2021;12(6):663–671.
   Google Scholar
• Reham SS, Masjuki HH, Kalam MA, et al. Study on stability, fuel properties, engine combustion, performance and emission characteristics of biofuel emulsion. Renew Sust Energy Rev. 2015;52:1566–1579.
   Web of Science ®Google Scholar
• Gude VG, Martinez-Guerra E. Green chemistry with process intensification for sustainable biodiesel production. Environ Chem Lett. 2018;16(2):327–341.
   Web of Science ®Google Scholar
• Nallamothu RB, Anantha Kamal N, Seshu Kishan N, et al. Effect of multiple injection strategy on combustion of cotton seed oil biodiesel in CRDI diesel engine. In Recent trends in mechanical engineering. Singapore: Springer; 2020. p. 107–119.
   Google Scholar
• Kukana R, Jakhar OP. Investigating the effect of biodiesel derived from ambadi oil and waste cooking oil on performance, combustion and emission analysis using compression ignition engine. Int J Ambient Energy. 2022;43:1–16.
   Google Scholar
• Lei Y, Liu J, Qiu T, et al. Effect of injection dynamic behavior on fuel spray penetration of common-rail injector. Energy. 2019;188:116060.
   Web of Science ®Google Scholar
• Lim J, Razak NA, Mazlan NM. An evaluation of alternative fuels’ spray penetration at various spray cone angles and injection pressures using a simple evaporation model. Biofuels. 2022;13(3):321–331.
   Google Scholar
• de la Garza OA, Martínez-Martínez S, Avulapati MM, et al. Biofuels and its spray interactions under pilot-main injection strategy. Energy. 2021;219:119464.
   Web of Science ®Google Scholar
• Han D, Duan Y, Wang C, et al. Experimental study of the two-stage injection process of fatty acid esters on a common rail injection system. Fuel. 2016;163:214–222.
   Web of Science ®Google Scholar
• Cha J, Yang SY, Naser N, et al. 2015. High pressure and split injection strategies for fuel efficiency and emissions in DI diesel engine (No. 2015-01-1823). SAE Technical Paper.
   Google Scholar
• How HG, Masjuki HH, Kalam MA, et al. Influence of injection timing and split injection strategies on performance, emissions, and combustion characteristics of diesel engine fueled with biodiesel blended fuels. Fuel. 2018;213:106–114.
   Web of Science ®Google Scholar
• Nguyen VH, Cavicchi A, Nguyen DX, et al. Hydraulic characterization of a second-generation common rail injector operating under solo and split injection strategies. Flow Meas Instrum. 2022;85:102170.
   Web of Science ®Google Scholar
• Pavan P, Bhaskar K, Sekar S. Effect of split injection and injection pressure on CRDI engine fuelled with POME-diesel blend. Fuel. 2021;292:120242.
   Web of Science ®Google Scholar
• Chong CT, Tian B, Ng J-H, et al. Quantification of carbon particulates produced under open liquid Pool and prevaporised flame conditions: waste cooking oil biodiesel blends. Fuel. 2020;270:117469.
   Web of Science ®Google Scholar
• Nguyen T, Pham M, Anh TL. Spray, combustion, performance and emission characteristics of a common rail diesel engine fueled by fish-oil biodiesel blends. Fuel. 2020;269:117108.
   Web of Science ®Google Scholar
• Fu W, Li F, Meng K, et al. Experiment and analysis of spray characteristics of biodiesel blending with di-n-butyl ether in a direct injection combustion chamber. Energy. 2019;185:77–89.
   Web of Science ®Google Scholar
• Baek HM, Lee HM. Spray behavior, combustion, and emission characteristics of jet propellant-5 and biodiesel fuels with multiple split injection strategies. Energies. 2022;15(7):2540.
   Web of Science ®Google Scholar
• Mohan B, Yang W, Tay KL, et al. Experimental study of spray characteristics of biodiesel derived from waste cooking oil. Energy Convers Manag. 2014;88:622–632.
   Web of Science ®Google Scholar
• Hernández-Altamirano R, Mena-Cervantes V. 2018. Patent application No. MX/a/2018/015832.
   Google Scholar
• Rosset M, Perez-Lopez OW. FTIR spectroscopy analysis for monitoring biodiesel production by heterogeneous catalyst. Vib Spectrosc. 2019;105:102990.
   Web of Science ®Google Scholar
• Doudin KI. Quantitative and qualitative analysis of biodiesel by NMR spectroscopic methods. Fuel. 2021;284:119114.
   Web of Science ®Google Scholar
• Knothe G, Razon LF, Madulid DA, et al. Methyl esters (biodiesel) from pachyrhizus erosus seed oil. Biofuels. 2018;9(4):449–454.
   Web of Science ®Google Scholar
• Valente OS, Pasa VMD, Belchior CRP, et al. Physical–chemical properties of waste cooking oil biodiesel and castor oil biodiesel blends. Fuel. 2011;90(4):1700–1702.
   Web of Science ®Google Scholar
• Borugadda VB, Paul AK, Chaudhari AJ, et al. Influence of waste cooking oil methyl ester biodiesel blends on the performance and emissions of a diesel engine. Waste Biomass Valor. 2018;9(2):283–292.
   Web of Science ®Google Scholar
• Rubio-Gómez G, Martínez-Martínez S, Rua-Mojica LF, et al. Automatic macroscopic characterization of diesel sprays by means of a new image processing algorithm. Meas Sci Technol. 2018;29(5):055406.
   Web of Science ®Google Scholar
• Wang Z, Jiang C, Xu H, et al. Macroscopic and microscopic characterization of diesel spray under room temperature and low temperature with split injection. Fuel Process Technol. 2016;142:71–85.
   Web of Science ®Google Scholar
• Ghandilou AJ, Taghavifar H. New insight into air/spray boundary interaction for diesel and biodiesel fuels under different fuel temperatures. Biofuels. 2022;13(9):1087–1101.
   Google Scholar
• Ghurri A, Kim J-D, Kim H-G, et al. The effect of injection pressure and fuel viscosity on the spray characteristics of biodiesel blends injected into an atmospheric chamber. J Mech Sci Technol. 2012;26(9):2941–2947.
   Web of Science ®Google Scholar
• Ramalingam S, Dharmalingam B, Deepakkumar R, et al. Effect of mringa oleifera biodiesel-diesel-carbon black water emulsion blends engine characteristics. Energy Rep. 2022;8:9598–9609.
   Web of Science ®Google Scholar
• Parck SW, Suh HK, Lee S. Effects of a split injection on spray characteristics for a common-rail type diesel injection system. Int J Automot Technol. 2005;6(4):315–322.
   Web of Science ®Google Scholar